UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-Q

(Mark One)



ý	QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended December 29, 2018



¨	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from to

Commission File Number: 0-12853




ELECTRO SCIENTIFIC INDUSTRIES, INC.



Oregon		93-0370304
(State or other jurisdiction of incorporation or organization)		(I.R.S. Employer Identification No.)

13900 N.W. Science Park Drive, Portland, Oregon		97229
(Address of principal executive offices)		(Zip Code)

Registrant’s telephone number, including area code: 503-641-4141

Registrant’s web address: www.esi.com

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý No ¨

Indicate by check mark whether the registrant has submitted electronically, every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ý No ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.



Large accelerated filer	¨	Accelerated filer	ý	Non-accelerated filer	¨
Smaller reporting company	¨	Emerging growth company	¨

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No ý

The number of shares outstanding of the Registrant’s Common Stock as of January 25, 2019 was 34,422,361 shares.

Table of Contents

ELECTRO SCIENTIFIC INDUSTRIES, INC. AND SUBSIDIARIES

2019 FORM 10-Q QUARTERLY REPORT

TABLE OF CONTENTS



Part I	FINANCIAL INFORMATION
Item 1.	Financial Statements (Unaudited)
	Condensed Consolidated Balance Sheets - at December 29, 2018 and March 31, 2018	3
	Condensed Consolidated Statements of Operations - for the fiscal quarter and three fiscal quarters ended December 29, 2018 and December 30, 2017	4
	Condensed Consolidated Statements of Comprehensive Income - for the fiscal quarter and three fiscal quarters ended December 29, 2018 and December 30, 2017	5
	Condensed Consolidated Statements of Cash Flows - for the three fiscal quarters ended December 29, 2018 and December 30, 2017	6
	Notes to Condensed Consolidated Financial Statements	7
Item 2.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	21
Item 3.	Quantitative and Qualitative Disclosures about Market Risk	28
Item 4.	Controls and Procedures	28
Part II	OTHER INFORMATION
Item 1.	Legal Proceedings	29
Item 1A.	Risk Factors	29
Item 2.	Unregistered Sales of Equity Securities and Use of Proceeds	39
Item 4.	Mine Safety Disclosures	39
Item 5.	Other Information	40
Item 6.	Exhibits and Financial Statement Schedules	41
SIGNATURES		42

Table of Contents

ELECTRO SCIENTIFIC INDUSTRIES, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED BALANCE SHEETS

(Unaudited)



(In thousands)	Dec 29, 2018			Mar 31, 2018
ASSETS
Current assets:
Cash and cash equivalents	$	52,129		$	76,792
Short-term investments	123,081			47,121
Trade receivables, net of allowances of $176 and $832	55,557			63,044
Inventories, net	81,846			87,686
Shipped systems pending acceptance	2,693			4,734
Other current assets	6,077			5,493
Total current assets	321,383			284,870
Non-current assets:
Property, plant and equipment (PP&E), net of accumulated depreciation of $86,504 and $83,159	25,623			22,025
Deferred income taxes, net	40,919			43,518
Goodwill	2,626			2,626
Acquired intangible assets, net of accumulated amortization of $23,837 and $22,766	4,099			5,169
Other assets	13,502			14,780
Total assets	$	408,152		$	372,988
LIABILITIES AND SHAREHOLDERS’ EQUITY
Current liabilities:
Accounts payable	$	27,505		$	37,354
Accrued liabilities	25,487			34,533
Deferred revenue	8,777			9,818
Total current liabilities	61,769			81,705
Non-current liabilities:
Long-term debt	12,438			12,766
Income taxes payable	2,119			1,901
Other liabilities	7,447			10,258
Total liabilities	83,773			106,630
Commitments and contingencies (See Note 11: Commitments and Contingencies)
Shareholders’ equity:
Preferred stock, without par value; 1,000 shares authorized; no shares issued	—			—
Common stock, without par value; 100,000 shares authorized; 34,784 and 34,387 issued and outstanding	216,174			210,995
Retained earnings	109,176			54,816
Accumulated other comprehensive (loss) income	(971		)	547
Total shareholders’ equity	324,379			266,358
Total liabilities and shareholders’ equity	$	408,152		$	372,988

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements

Table of Contents

ELECTRO SCIENTIFIC INDUSTRIES, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

(Unaudited)



	Fiscal quarter ended					Three fiscal quarters ended
(In thousands, except per share amounts)	Dec 29, 2018			Dec 30, 2017		Dec 29, 2018		Dec 30, 2017
Net sales:
Systems	$	55,679		$	99,418	$	223,799	$	221,827
Services	12,263			11,422		40,684		32,664
Total net sales	67,942			110,840		264,483		254,491
Cost of sales:
Systems	34,744			52,502		125,377		132,107
Services	7,060			5,182		20,703		16,276
Total cost of sales	41,804			57,684		146,080		148,383
Gross profit	26,138			53,156		118,403		106,108
Operating expenses:
Selling, general and administrative	9,376			11,040		30,344		35,496
Research, development and engineering	8,609			8,165		27,821		25,373
Restructuring costs	—			706		—		4,079
Merger and integration costs	4,277			—		4,277		—
Total operating expenses	22,262			19,911		62,442		64,948
Operating income	3,876			33,245		55,961		41,160
Non-operating income:
Interest and other income, net	1,985			789		2,820		376
Total non-operating income	1,985			789		2,820		376
Income before income taxes	5,861			34,034		58,781		41,536
(Benefit from) provision for income taxes	(479		)	61		4,462		401
Net income	$	6,340		$	33,973	$	54,319	$	41,135
Net income per share - basic	$	0.18		$	0.99	$	1.57	$	1.22
Net income per share - diluted	$	0.18		$	0.94	$	1.50	$	1.16
Weighted average number of shares - basic	34,769			34,224		34,623		33,839
Weighted average number of shares - diluted	35,975			36,010		36,127		35,562

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements

Table of Contents

ELECTRO SCIENTIFIC INDUSTRIES, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

(Unaudited)



	Fiscal quarter ended						Three fiscal quarters ended
(In thousands)	Dec 29, 2018			Dec 30, 2017			Dec 29, 2018			Dec 30, 2017
Net income	$	6,340		$	33,973		$	54,319		$	41,135
Other comprehensive (loss) income:
Foreign currency translation adjustment, net of taxes of $13, $8, $270 and $8	(44		)	581			(1,528		)	969
Benefit plan obligation, net of taxes of $(2), $(2), $(5) and $(7)	4			4			11			13
Net unrealized loss on available-for-sale securities, net of taxes of $3, $0, $0 and $0	(11		)	(17		)	(1		)	(18		)
Other comprehensive (loss) income:	(51		)	568			(1,518		)	964
Comprehensive income	$	6,289		$	34,541		$	52,801		$	42,099

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements

Table of Contents

ELECTRO SCIENTIFIC INDUSTRIES, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(Unaudited)



	Three fiscal quarters ended
(In thousands)	Dec 29, 2018			Dec 30, 2017
CASH FLOWS FROM OPERATING ACTIVITIES
Net income	$	54,319		$	41,135
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation and amortization, including acquired intangible amortization	6,528			6,523
Share-based compensation expense	4,868			3,510
Impairment of PP&E and other long-term assets due to restructuring	—			5,610
(Recovery of) provision for doubtful accounts	(550		)	603
Deferred income taxes	2,797			2
Loss on sale of PP&E	247			—
Impairment of inventory	—			8,248
Loss on disposal of property and equipment, net	—			101
Gain on sale of laser ablation assets	—			(917		)
Changes in operating accounts:
Decrease (increase) in trade receivables, net	7,643			(35,271		)
Decrease (increase) in inventories	1,502			(24,402		)
Decrease (increase) in shipped systems pending acceptance	2,041			(67		)
Decrease in other current assets	518			1,489
(Decrease) increase in accounts payable and accrued liabilities	(21,579		)	36,963
Decrease in deferred revenue	(988		)	(2,730		)
Net cash provided by operating activities	57,346			40,797
CASH FLOWS FROM INVESTING ACTIVITIES
Purchase of investments	(155,020		)	(48,668		)
Proceeds from sales and maturities of investments	78,918			17,034
Purchase of property, plant and equipment	(6,670		)	(3,079		)
Proceeds from sale of laser ablation assets	1,638			2,999
Decrease (increase) in other assets	523			(4,646		)
Net cash used in investing activities	(80,611		)	(36,360		)
CASH FLOWS FROM FINANCING ACTIVITIES
Repayment of debt	(337		)	(321		)
Payment of withholding taxes on stock-based compensation	(951		)	(1,696		)
Proceeds from issuance of common stock	1,238			2,624
Net cash (used in) provided by financing activities	(50		)	607
Effect of exchange rate changes on cash	(1,337		)	562
NET CHANGE IN CASH, CASH EQUIVALENTS AND RESTRICTED CASH	(24,652		)	5,606
CASH, CASH EQUIVALENTS AND RESTRICTED CASH AT BEGINNING OF PERIOD	77,885			57,732
CASH, CASH EQUIVALENTS, AND RESTRICTED CASH AT END OF PERIOD	$	53,233		$	63,338
SUPPLEMENTAL CASH FLOW INFORMATION
Cash paid for interest	$	(477	)	$	(496	)
Cash paid for income taxes	(1,766		)	(979		)
Income tax refunds received	34			67
Net increase (decrease) in PP&E and other assets related to transfers from inventory	3,990			(824		)
Non-cash additions to PP&E	1,537			483

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements

Table of Contents

ELECTRO SCIENTIFIC INDUSTRIES, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)



Note 1	Basis of Presentation	7
Note 2	Recent Accounting Pronouncements	10
Note 3	Fair Value Measurements	12
Note 4	Inventories	14
Note 5	Other Assets	14
Note 6	Accrued Liabilities	15
Note 7	Product Warranty	15
Note 8	Deferred Revenue	15
Note 9	Long-term Debt	16
Note 10	Revolving Credit Facility	16
Note 11	Commitments and Contingencies	17
Note 12	Shareholders’ Equity	17
Note 13	Accumulated Other Comprehensive Income (Loss)	18
Note 14	Share-Based Compensation	18
Note 15	Revenues, Product and Geographic Information	18
Note 16	Restructuring and Cost Management Plans	19
Note 17	Income Taxes	20
Note 18	Earnings Per Share	20
Note 19	Merger Agreement	20
Note 20	Subsequent Events	20

1. Basis of Presentation

These unaudited interim condensed consolidated financial statements have been prepared pursuant to the rules and regulations of the Securities and Exchange Commission. Certain information and footnote disclosures normally included in annual financial statements prepared in accordance with United States generally accepted accounting principles (U.S. GAAP) have been condensed or omitted in these interim statements. Accordingly, these condensed consolidated financial statements should be read in conjunction with the financial statements and notes included in the Annual Report of Electro Scientific Industries, Inc. (the Company) on Form 10-K for its fiscal year ended March 31, 2018. These interim statements include all adjustments (consisting of only normal recurring adjustments and accruals) necessary for a fair presentation of results for the interim periods presented. The results for interim periods are not necessarily indicative of the results of operations for the entire year.

The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of commitments and contingencies at the date of the financial statements and the reported amounts of revenues and expenses during the reporting periods. Actual results may differ from those estimates.

Management believes that the estimates used are reasonable. Estimates made by management include: revenue recognition; inventory valuation; valuation of investments; accrued restructuring costs; share-based compensation; income taxes, including the valuation of deferred tax assets; valuation of long-lived assets, including intangibles; valuation of goodwill and acquisition accounting.

The fiscal quarters ended December 29, 2018 and December 30, 2017 each consisted of 13-week periods. Similarly, the three fiscal quarters ended December 29, 2018 and the three fiscal quarters ended December 30, 2017 each consisted of 39-week periods.

On October 29, 2018, the Company signed a definitive agreement for MKS Instruments, Inc. (NASDAQ:MKSI) to acquire the Company. See Note 19: Merger Agreement for further details.

Table of Contents

Restricted Cash

Cash and cash equivalents that are restricted as to withdrawal or use under the terms of certain contractual agreements are recorded in Other current assets on our balance sheet for fiscal 2019 and in Other long-term assets in fiscal 2018. The following table provides a summary of the Company's cash, cash equivalents and restricted cash position:



(In thousands)	Dec 29, 2018		Mar 31, 2018		Dec 30, 2017
Cash and cash equivalents	$	52,129	$	76,792	$	62,251
Restricted cash included in other current assets	1,104		—		—
Restricted cash included in other long-term assets	—		1,093		1,087
Total cash, cash equivalents and restricted cash	$	53,233	$	77,885	$	63,338

Changes to Significant Accounting Policies

The only significant changes to the Company's significant accounting policies from those presented in Note 2: Summary of Significant Accounting Policies to the consolidated financial statements included in the Company's Annual Report on Form 10-K for its fiscal year ended March 31, 2018 were due to the adoption of Financial Accounting Standards Board (FASB) Accounting Standards Codification (ASC) 606, "Revenue from Contracts with Customers". Changes to associated accounting policies are summarized below.

Accounts Receivable and Allowance for Doubtful Accounts

Trade receivables are stated at the amount the Company has an unconditional right to bill and generally do not bear interest, net of any estimated allowance for doubtful accounts. The Company establishes and monitors the collectability of amounts due from customers and sets appropriate credit limits based on an evaluation of the financial condition of customers and other relevant factors, including but not limited to obtaining credit ratings and customers' financial statements. With certain customers, letters of credit are obtained to mitigate credit risk. Subsequent to entering into a contract, if it is determined or expected that a customer will be unable to fully meet its financial obligation, such as in the case of a bankruptcy filing or other material events impacting its business, a specific allowance for bad debt is recorded to reduce the related receivable to the amount expected to be recovered. Bad debts are historically insignificant for the Company, and allowances for doubtful accounts are established based on actual experience.

Unbilled receivables arise when the Company has performed services and earned amounts related to a customer contract, but has not yet billed those amounts. Unbilled receivables were $1.2 million as of December 29, 2018 and $0.9 million as of March 31, 2018 and were included as a component of Trade receivables, net of allowances, on the Condensed Consolidated Balance Sheets.

Shipped Systems Pending Acceptance

Shipped systems pending acceptance represent deferred costs of sales related to systems shipped to the customer, but where revenue has been deferred pending the customer's final acceptance. These contracts also generally result in a deferred revenue contract liability. Once the criteria for revenue recognition have been met for these contracts, the deferred costs are recognized as a cost of sales together with the associated revenue.

Contract Assets and Liabilities Arising from Contracts with Customers

Customer deposits are a contract liability representing amounts collected from customers prior to any performance of the contract on the part of the Company. Customer deposits are included as a component of Accrued liabilities on our balance sheet (see Note 6: Accrued Liabilities).

Deferred revenues (see Note 8: Deferred Revenue) are a contract liability representing the amount of billings for contracts where the Company has an unconditional right to consideration, in excess of revenues recognized and amounts billed. The value of customer deposits and deferred revenues will increase or decrease based on the timing of invoices and recognition of revenue.

Revenue Recognition

The Company recognizes revenue according to the five steps required by ASC 606; (1) identifying the contract with a customer, (2) identifying the performance obligations in the contract, (3) determining the transaction price, (4) allocating the transaction price to performance obligations in the contract, and (5) recognizing revenue when (or as) the Company satisfies a performance obligation.

The Company's revenue streams primarily come from two sources, system sales and service sales.

Table of Contents

Systems Revenues: The Company sells high-value capital equipment to customers and these system sales generally include the base system, supporting components (such as input devices and related tooling), and a standard warranty. The performance obligations related to system sales are generally satisfied at a point-in-time upon transfer of control. Transfer of control is determined with consideration of commercial and billing terms, physical movement, transfer of the risks and rewards of ownership, transfer of title, and customer acceptance or a track record of acceptance and any other relevant factors. If the Company has a demonstrable track record of acceptance for a system sold, the Company deems transfer of control to have occurred in accordance with commercial terms, even if customer acceptance has not been received, as the acceptance is a formality and is not considered substantive. Payment on system sales is generally due within 90 days of shipment or less. Standard warranties on systems are assurance-type warranties and are recorded as a liability at the time of shipment (see Note 7: Product Warranty).

Service Revenues: The Company offers additional services directly associated with the capital equipment it sells. These are generally in two major categories: (1) service contracts, which are generally recognized over time, and (2) point-in-time services. Service contracts recognized over time include extended service contracts (labor and materials), consumables and materials contracts, and labor-only contracts. Most service contracts recognized over time have a stated contract period and revenue is recognized over that period. Certain contracts may be consumption-based, in which case the revenue is recognized ratably in relation to the associated consumption. Service contracts are generally billed and are due in advance of the service period. Point-in-time services include spare parts sales, labor, trouble-shooting services, and similar items, and these are recognized at a point in time upon shipment or transfer of control, and are generally billed concurrent with recognition. Standard warranties on parts are assurance-type warranties and are recorded as a liability at the time of shipment (see Note 7: Product Warranty).

The Company must make various judgments and estimates that vary in level of significance and subjectivity when recognizing revenue. The primary judgments include an evaluation of any credit risk, as described in our policy on accounts receivable, the identification of variable consideration in the contract, the determination of performance obligations in a contract, the determination of standalone selling prices for performance obligations, and the determination of when performance obligations are fulfilled.

Generally, our revenue streams are subject to little variable consideration as we have minimal historical or expected future returns or other adjustments to selling price. Accordingly, standalone selling price is used to determine how to allocate the overall transaction price for a contract. Standalone selling price is based on historical transactions where available and relevant, and when not available, on a method that maximizes the use of observable inputs, which is generally a cost plus reasonable margin approach. Performance obligations are typically documented and evident from our contracts with customers and the associated triggers for transfer of control are generally objective as they are based on attributes such as shipment, customer acceptance, and other similar criteria. From time to time, however, the Company must exercise judgment to determine if transfer of control has occurred based on criteria such as whether a track record of acceptance has been established and acceptance terms are substantive, whether the risks and rewards of ownership have been transferred, or whether there are other facts and circumstances that could impact the timing and amount of revenue recognized. These judgmental determinations are made based on a weighting of all available evidence.

Revenues associated with sales to customers under local contracts in Japan are typically recognized upon title transfer, which generally occurs upon customer acceptance.

Revenues are recorded net of taxes collected from customers, which are subsequently submitted to governmental authorities.

Practical Expedients Related to Revenue Recognition

For contracts with customers which have a duration of less than 12 months, the Company has elected the practical expedient to recognize commission costs when paid, as the amortization period would generally be one year or less. Commissions associated with contracts with a duration over 12 months are immaterial. Commission costs are recorded as a component of Selling, general and administrative expenses.

As the Company's contracts with customers generally have a duration of less than 12 months, and for certain contracts with a duration over 12 months, a right to payment exists as services are performed, the Company has elected to not disclose the remaining performance obligations for those contracts. For contracts where the Company has a right to consideration from a customer in an amount that corresponds directly to the services delivered to-date and for which the Company has a right to invoice, the Company recognizes revenue for the services rendered.

The Company's contracts are generally not paid more than 12 months in advance or more than 12 months after delivery and therefore do not typically have a significant financing element. Accordingly, the Company has elected to not assess whether a contract has a significant financing component in performing the revenue assessment.

For contracts where control transfers prior to delivery, the Company accounts for shipping and handling costs as a fulfillment cost and not as a performance obligation for revenue recognition purposes.

Table of Contents

2. Recent Accounting Pronouncements

Adopted accounting pronouncements:

In February 2018, the FASB issued ASU 2018-03, Technical Corrections and Improvements to Financial Instruments—Overall (Subtopic 825-10): Recognition and Measurement of Financial Assets and Financial Liabilities, which made six targeted amendments to ASU 2016-01, Financial Instruments - Overall (Subtopic 825-10) Recognition and Measurement of Financial Assets and Financial Liabilities. These amendments mostly affect the accounting for equity investments, financial liabilities under the fair value option, and the presentation and disclosure requirements for financial instruments. ASU 2018-03 became effective as of the Company's second quarter of fiscal 2019 ending September 29, 2018. Adopting ASU 2018-03 had no material effect on the Company's financial position, results of operations or cash flows.

In February 2018, the FASB issued ASU 2018-02, Income Statement—Reporting Comprehensive Income (Topic 220): Reclassification of Certain Tax Effects from Accumulated Other Comprehensive Income, in response the enactment of the Tax Cuts and Jobs Act (the Tax Act) and the subsequent questions and concerns of stakeholders regarding how to apply the changes to the income tax effects of deferred tax assets and liabilities sitting in accumulated other comprehensive income. The guidance eliminates the resulting stranded tax effects and improves the usefulness of the information reported to users of the financial statements. ASU 2018-02 was effective for the Company as of April 1, 2018, the beginning of fiscal 2019. Adopting ASU 2018-02 had no material effect on the Company's financial position, results of operations or cash flows.

In May 2017, the FASB issued ASU 2017-09, Compensation—Stock Compensation (Topic 718): Scope of Modification Accounting, which amends the scope of modification accounting surrounding share-based payment arrangements as issued in ASU 2016-09 by providing guidance on the various types of changes which would trigger modification accounting for share-based payment awards, specifically an entity would not apply modification accounting under ASC 718 if the fair value, vesting conditions, and classification of the awards are the same immediately before and after the modification. ASU 2017-09 was effective for the Company as of April 1, 2018, the beginning of fiscal 2019. The adoption of ASU 2017-09 had no material effect on the Company's financial position, results of operations or cash flows.

In March 2017, the FASB issued ASU 2017-07, Compensation—Retirement Benefits (Topic 715): Improving the Presentation of Net Periodic Pension Cost and Net Periodic Postretirement Benefit Cost, which requires companies to disaggregate the current-service-cost component from other components of net benefit cost and provides specific guidance for presentation in the income statement. ASU 2017-07 was effective for the Company as of April 1, 2018, the beginning of fiscal 2019. The adoption of ASU 2017-07 had no material effect on the Company's financial position, results of operations or cash flows.

In October 2016, the FASB issued ASU 2016-16, Income Taxes (Topic 740): Intra-Entity Transfers of Assets Other Than Inventory, to improve and simplify the accounting for the income tax consequences of intra-entity transfers of assets other than inventory, requiring companies to recognize income tax consequences upon the transfer of the asset to a third party. ASU 2017-09 was effective for the Company as of April 1, 2018, the beginning of fiscal 2019. The adoption of ASU 2016-16 had no material effect on the Company's financial position, results of operations or cash flows.

In May 2014, the FASB issued ASU 2014-09, Revenue from Contracts with Customers: Topic 606 (ASU 2014-09), to supersede nearly all existing revenue recognition guidance under U.S. GAAP. The core principle of ASU 2014-09 is to recognize revenues when promised goods or services are transferred to customers in an amount that reflects the consideration that the Company expects to be entitled to for those goods or services. The FASB has continued to issue ASU topics to further clarify ASU 2014-09. These have included ASU 2016-08, ASU 2016-10, ASU 2016-12, and ASU 2016-20. The new standards were effective for the Company as of April 1, 2018, the beginning of fiscal 2019. The Company elected the modified retrospective approach as its transition method. The new standard resulted in an immaterial change to revenue recognition related to system sales and service contracts, the Company's major revenue streams. The cumulative effect of the changes made to our consolidated balance sheet as of April 1, 2018 related to the adoption of ASC 606 for contracts not completed at the date of adoption were as follows:

Table of Contents



(In thousands)	Mar 31, 2018		Adjustments			Apr 1, 2018
ASSETS
Non-current assets:
Deferred income taxes, net	$	43,518	$	(12	)	$	43,506
Total assets	$	372,988	$	(12	)	$	372,976
LIABILITIES AND SHAREHOLDERS' EQUITY
Current liabilities:
Deferred revenue	$	9,818	$	(52	)	$	9,766
Total current liabilities	81,705		(52		)	81,653
Total liabilities	106,630		(52		)	106,578
Shareholders’ equity:
Retained earnings	54,816		40			54,856
Total shareholders’ equity	266,358		40			266,398
Total liabilities and shareholders’ equity	$	372,988	$	(12	)	$	372,976

The adoption of ASC 606 did not have a material impact on the Company's financial position, results of operations or cash flows as of and for the fiscal third quarter ended December 29, 2018 or the first three quarters of fiscal 2019 ended December 29, 2018. Additionally, we do not expect the adoption of the standard to have a material impact to our financial position on an ongoing basis.

Recently issued accounting pronouncements not yet adopted

In August 2018, the FASB issued ASU 2018-13, Fair Value Measurement (Topic 820): Disclosure Framework—Changes to the Disclosure Requirements for Fair Value Measurement, to improve disclosures of the key provisions of ASC 820 by adding, modifying, and removing certain targeted disclosure requirements. ASU 2018-13 is effective for annual periods beginning after December 15, 2019, and interim periods within those annual periods, which would be the Company's fiscal year ending April 3, 2021. Early adoption is permitted, including adoption in any interim period, for public business entities for reporting periods for which financial statements have not yet been issued and early adoption is permitted for any removed or modified disclosure while delaying adoption of the remaining disclosures until their effective date. While the Company does not expect the adoption of ASU 2018-13 to have a material effect on its business, the Company is still evaluating any potential impact that adoption of ASU 2018-13 may have on its financial position, results of operations or cash flows.

In August 2017, the FASB issued ASU 2017-12, Derivatives and Hedging (Topic 815): Targeted Improvements to Accounting for Hedging Activities, in order to (i) improve disclosures related to an entity's risk management activities through better transparency and understandability and (ii) simplify and reduce the complexity of hedge accounting by preparers. ASU 2017-12 is effective for annual periods beginning after December 15, 2018, and interim periods within those annual periods, which would be the Company's fiscal year ending March 28, 2020. Early adoption is permitted, including adoption in any interim period, for public business entities for reporting periods for which financial statements have not yet been issued. The FASB also issued ASU 2018-16 to modify and clarify portions of ASU 2017-12. While the Company does not expect the adoption of ASU 2017-12 to have a material effect on its business, the Company is still evaluating any potential impact that adoption of ASU 2017-12 may have on its financial position, results of operations or cash flows.

In February 2016, the FASB issued ASU 2016-02, Leases. ASU 2016-02 increases transparency and comparability among organizations by recognizing lease assets and lease liabilities on the balance sheet and requires disclosing key information about leasing arrangements. The FASB has issued ASU 2018-01, ASU 2018-11 and ASU 2018-20 to clarify and make targeted improvements to ASU 2016-02. ASU 2016-02 is effective for annual periods beginning after December 15, 2018 and interim periods within those annual periods, which would be the Company's fiscal year ending March 28, 2020. The Company is still evaluating any potential impact that adoption of ASU 2016-02 may have on its financial position, results of operations or cash flows. The Company is in the preliminary scoping phase of implementation and is currently identifying the impacted leases and preparing to perform initial quantification of the potential impacts. The Company has established a plan to develop and implement any associated business processes, as well as perform applicable accounting and reporting evaluations in advance of the effective date of the standard.

Table of Contents

3. Fair Value Measurements

Financial Assets and Liabilities Measured at Fair Value

ASC Topic 820 establishes a three-tier fair value hierarchy, which prioritizes the inputs used in measuring fair value. These tiers include the following:


•	Level 1, defined as observable inputs such as quoted prices in active markets for identical assets or liabilities;


•	Level 2, defined as inputs that are observable either directly or indirectly such as quoted prices for similar assets or liabilities in active markets, quoted prices for identical or similar assets or liabilities in markets that are not active and other inputs that can be corroborated by observable market data; and


•	Level 3, defined as unobservable inputs for which little or no market data exists, therefore requiring an entity to develop its own assumptions.

The Company’s fair value hierarchy for its financial assets and liabilities measured at fair value on a recurring basis as of December 29, 2018 and March 31, 2018 was as follows (in thousands):



December 29, 2018	Level 1		Level 2			Level 3		Total
Cash equivalents:
Money market securities	$	21,578	$	—		$	—	$	21,578
Total cash equivalents	$	21,578	$	—		$	—	$	21,578
Short term investments - available for sale:
U.S. treasury fund	$	26,910	$	—		$	—	$	26,910
Commercial paper	—		58,530			—		58,530
Corporate bonds	—		37,641			—		37,641
Total short-term investments - available for sale	$	26,910	$	96,171		$	—	$	123,081
Forward purchase or sale contracts:
Japanese Yen	$	—	$	24		$	—	$	24
New Taiwan Dollar	—		5			—		5
Korean Won	—		10			—		10
Euro	—		14			—		14
British Pound	—		19			—		19
Chinese Renminbi	—		(41		)	—		(41		)
Singapore Dollar	—		1			—		1
Total forward contracts	$	—	$	32		$	—	$	32
Deferred compensation plan assets:*
Mutual funds and exchange traded funds	$	1,874	$	—		$	—	$	1,874
Money market securities	316		—			—		316
Total deferred compensation plan assets	$	2,190	$	—		$	—	$	2,190

Table of Contents



March 31, 2018	Level 1		Level 2			Level 3		Total
Cash equivalents:
Money market securities	$	41,752	$	—		$	—	$	41,752
U.S. treasury fund	2,500		—			—		2,500
Commercial paper	—		3,498			—		3,498
Corporate bonds	—		1,999			—		1,999
Total cash equivalents	$	44,252	$	5,497		$	—	$	49,749
Short term investments - available for sale:
U.S. treasury fund	$	10,458	$	—		$	—	$	10,458
Commercial paper	—		25,913			—		25,913
Corporate bonds	—		10,750			—		10,750
Total short-term investments - available for sale	$	10,458	$	36,663		$	—	$	47,121
Forward purchase or sale contracts:
Japanese Yen	$	—	$	(23	)	$	—	$	(23	)
New Taiwan Dollar	—		3			—		3
Korean Won	—		(12		)	—		(12		)
Euro	—		7			—		7
British Pound	—		49			—		49
Chinese Renminbi	—		(29		)	—		(29		)
Singapore Dollar	—		(1		)	—		(1		)
Total forward contracts	$	—	$	(6	)	$	—	$	(6	)
Deferred compensation plan assets:*
Mutual funds and exchange traded funds	$	1,841	$	—		$	—	$	1,841
Money market securities	207		—			—		207
Total deferred compensation plan assets	$	2,048	$	—		$	—	$	2,048

*These investments represent assets held in trust for the deferred compensation plan

For Level 1 assets, the Company utilized quoted prices in active markets for identical assets.

For Level 2 assets, exclusive of forward contracts, the Company utilized quoted prices in active markets for similar assets. For forward contracts, spot prices at December 29, 2018 and March 31, 2018 were utilized to calculate fair values.

During the first three quarters of fiscal 2019 and fiscal 2018, there were no transfers between Level 1, 2 or 3 assets.

Table of Contents

Investments

The Company’s investments, including investments classified as cash equivalents, at December 29, 2018 and March 31, 2018 were as follows (in thousands):



			Unrealized
December 29, 2018	Cost		Gain		Loss			Fair Value
Available-for-sale securities (current):
U.S. treasury fund	$	26,912	$	—	$	(2	)	$	26,910
Commercial paper	58,530		—		—			58,530
Corporate Bonds	37,675		—		(34		)	37,641
Total investments (current)	$	123,117	$	—	$	(36	)	$	123,081
Available-for-sale securities (non-current):
Mutual funds, exchange traded funds and money market securities*	$	2,226	$	—	$	(36	)	$	2,190
Total investments (non-current)	$	2,226	$	—	$	(36	)	$	2,190
			Unrealized
March 31, 2018	Cost		Gain		Loss			Fair Value
Available-for-sale securities (current):
U.S. treasury fund	$	12,975	$	—	$	(17	)	$	12,958
Commercial paper	29,411		—		—			29,411
Corporate bonds	12,768		—		(19		)	12,749
Total investments (current)	$	55,154	$	—	$	(36	)	$	55,118
Available-for-sale securities (non-current):
Mutual funds, exchange traded funds and money market securities*	$	1,881	$	167	$	—		$	2,048
Total investments (non-current)	$	1,881	$	167	$	—		$	2,048

*These investments represent assets held in trust for the deferred compensation plan

For purposes of determining gross realized gains and losses and reclassification out of accumulated other comprehensive income (loss), the cost of securities sold is based on specific identification. Net unrealized holding gains and losses on current available-for-sale securities included in accumulated other comprehensive income (loss) were insignificant as of December 29, 2018 and March 31, 2018.

4. Inventories

Inventories are principally valued at standard cost, which approximates the lower of cost or net realizable value on a first-in, first-out basis. Components of inventories were as follows:



(In thousands)	Dec 29, 2018		Mar 31, 2018
Raw materials and purchased parts	$	58,855	$	52,591
Work-in-process	15,569		18,634
Finished goods	7,422		16,461
	$	81,846	$	87,686

5. Other Assets

Other assets consisted of the following:



(In thousands)	Dec 29, 2018		Mar 31, 2018
Demo and leased equipment, net	$	7,464	$	6,746
Long term deposits and non-trade receivables	2,830		3,232
Non-current restricted cash	—		1,093
Other non-current assets	3,208		3,709
	$	13,502	$	14,780

Table of Contents

Depreciation expense for demo and leased equipment in the first three quarters of fiscal 2019 totaled $0.6 million with no expense occurring in the third quarter of fiscal 2019. Depreciation expense for demo and leased equipment for the first three quarters of fiscal 2018 totaled $0.8 million with $0.6 million occurring in the third quarter of fiscal 2018. Of the total $7.5 million and $6.7 million of demo and leased equipment at December 29, 2018 and March 31, 2018, $1.3 million and $3.4 million were leased assets at customer sites expected to generate revenue.

Included in Other non-current assets are long-term investments held in a trust for the deferred compensation plan and other similar items.

6. Accrued Liabilities

Accrued liabilities consisted of the following:



(In thousands)	Dec 29, 2018		Mar 31, 2018
Payroll-related liabilities	$	8,880	$	15,879
Product warranty accrual	5,387		4,646
Purchase order commitments and receipts	2,136		2,978
Customer deposits	1,051		2,214
Income taxes payable	648		1,152
Current portion, long-term debt	437		421
Other current liabilities	6,948		7,243
	$	25,487	$	34,533

Included in other current liabilities above are accrued amounts for value-added taxes, freight, restructuring activities and other similar items.

7. Product Warranty

The following is a reconciliation of the changes in the aggregate product warranty accrual:



	Fiscal quarter ended						Three fiscal quarters ended
(In thousands)	Dec 29, 2018			Dec 30, 2017			Dec 29, 2018			Dec 30, 2017
Product warranty accrual, beginning	$	9,223		$	7,156		$	10,220		$	5,474
Warranty charges incurred, net	(2,683		)	(3,273		)	(7,026		)	(8,384		)
Provision for warranty charges	1,975			5,067			5,321			11,860
Product warranty accrual, ending	$	8,515		$	8,950		$	8,515		$	8,950

Net warranty charges incurred include labor charges and costs of replacement parts for repairs under warranty. These costs are recorded net of any estimated cost recoveries resulting from either successful repair of damaged parts or from warranties offered by the Company’s suppliers for defective components. The provision for warranty charges reflects the estimate of future anticipated net warranty costs to be incurred for all products under warranty at quarter end and is recorded to cost of sales. Of the total of $8.5 million and $9.0 million of product warranty accruals as of December 29, 2018 and December 30, 2017, $3.1 million and $4.5 million were non-current and were included in Other Liabilities on the Condensed Consolidated Balance Sheets.

8. Deferred Revenue

Generally, revenue is recognized upon satisfaction of performance obligations, which includes fulfillment of acceptance criteria at the Company's factory and transfer of risk of loss and title. Revenue is deferred whenever title transfer is pending, risk of loss has not transferred, and/or acceptance criteria have not yet been fulfilled. Deferred revenue arises from, among other factors, sales to Japanese customers, shipments of substantially new products and shipments with custom specifications and other acceptance criteria where the Company cannot demonstrate a track record of acceptance. For sales involving multiple performance obligations, the stand-alone selling price of any undelivered performance obligation, is deferred until the performance obligations are delivered and acceptance criteria are met. Revenue related to maintenance and service contracts is deferred and recognized ratably over the duration of the contracts.

Table of Contents

The following is a reconciliation of the changes in deferred revenue:



	Fiscal quarter ended						Three fiscal quarters ended
(In thousands)	Dec 29, 2018			Dec 30, 2017			Dec 29, 2018			Dec 30, 2017
Deferred revenue, beginning	$	8,551		$	16,369		$	10,514		$	15,397
Revenue deferred	9,982			20,009			38,266			66,661
Revenue recognized	(9,628		)	(23,991		)	(39,875		)	(69,671		)
Deferred revenue, ending	$	8,905		$	12,387		$	8,905		$	12,387

Of the total of $8.9 million and $12.4 million of deferred revenue at December 29, 2018 and December 30, 2017, $0.1 million and $0.4 million were non-current and were included in Other Liabilities on the Condensed Consolidated Balance Sheets. For the third quarter of fiscal 2019 and the first three quarters of fiscal 2019, revenue recognized that was included in the opening deferred revenue balance was $3.9 million and $8.4 million, respectively. For the third quarter of fiscal 2019 and the first three quarters of fiscal 2019, $0.6 million and $2.1 million of the beginning customer deposit balance was utilized in each of the periods, respectively. Customer deposits are included as a component of Accrued liabilities on our balance sheet (see Note 6: Accrued Liabilities). The amount of revenue recognized from performance obligations satisfied in prior periods was not material.

9. Long-term Debt

ESI Leasing, LLC (ESI Leasing), a wholly owned subsidiary of the Company, has a loan agreement (Loan Agreement) with First Technology Federal Credit Union (Lender) which provides for a term loan from the Lender to ESI Leasing in the principal amount of $14 million (Loan). The interest rate of the Loan is fixed at 4.75% per annum, except that it may be increased if certain covenants under the Loan Agreement are not satisfied and after and during the continuation of an “Event of Default” as defined in the Loan Agreement. The Loan amortizes over a period of approximately 20 years, with the outstanding principal maturing and becoming due on January 1, 2027. ESI Leasing pays monthly principal and interest payments on the Loan totaling $1.1 million annually through the maturity of the Loan. The Company unconditionally guarantees the Loan. The Company is required to maintain certain deposits with the Lender through March 31, 2019, at which point the restriction will be removed as long as it is in compliance with certain minimum covenants.

The principal maturities for each of the next five twelve-month periods ending on December 29 are as follows:



(In thousands)	2019		2020		2021		2022		2023
Principal maturities	$	471	$	492	$	518	$	543	$	570

Total debt outstanding on the Loan Agreement were as follows:



(In thousands)	Dec 29, 2018			Mar 31, 2018
Total debt outstanding	$	12,875		$	13,187
Less: Current portion, long-term debt	(437		)	(421		)
Long-term debt	$	12,438		$	12,766

Deferred debt issuance costs related to the above long-term debt as of December 29, 2018 and March 31, 2018 were $277 thousand and $302 thousand, respectively.

See Note 20: Subsequent Events for events related to the Loan Agreement which occurred subsequent to the end of the third quarter of fiscal 2019.

10. Revolving Credit Facility

The Company is party to a loan and security agreement (Credit Facility) with Silicon Valley Bank (SVB), which was initially entered into on March 20, 2015 and amended on July 12, 2016. The Credit Facility provides for a senior secured asset-based revolving facility with availability up to $30.0 million, including a $15.0 million sublimit for letters of credit. The Credit Facility expires March 20, 2019. At December 29, 2018, the Company had no amounts outstanding under the Credit Facility, was in compliance with all covenants, and was not in default under the Credit Facility. The commitment fee on the amount of unused credit was 0.3 percent. As amended, the Credit Facility allows for a greater level of EBITDA losses, but reduces the level of permitted acquisitions and purchases of capital equipment. If the Company fails to meet the covenants in its Credit Facility or its lenders fail to fund, access to the facility may be limited or the facility may become unavailable altogether.

See Note 20: Subsequent Events for events related to the Credit Facility which occurred subsequent to the end of the third quarter of fiscal 2019.

Table of Contents

11. Commitments and Contingencies

The Company mitigates credit risk by transacting with highly rated counterparties for foreign exchange contracts, letters of credit and other transactions where counterparty risk is a factor. The Company has evaluated the non-performance risks associated with the Company's lenders and other parties and believes them to be insignificant.

On or about November 29, 2018, the Company and members of the Board of Directors were named as defendants in a complaint filed in the U.S. District Court for the District of Oregon by alleged stockholders of the Company in connection with the proposed Merger. The complaint was dated November 29, 2018 and was captioned Brian Morris et. al. v. Electro Scientific Industries, Inc. et al. Five additional complaints were subsequently filed, two in the U.S. District Court for the District of Oregon and three in the Multnomah County Circuit Court in the State of Oregon. The cases filed in the U.S. District Court were dated December 6, 2018 and December 12, 2018 and captioned Melvyn Klein et. al. v. Electro Scientific Industries, Inc. et al. and Donald Mager et. al. v. Electro Scientific Industries, Inc. et al., respectively. The complaints filed in Multnomah County Circuit Court were dated December 5, 2018, December 5, 2018 and December 13, 2018 and captioned Michael Kent et. al v. Electro Scientific Industries, Inc. et al., Christopher Stanley et. al v. Electro Scientific Industries, Inc. et al. and Eduardo Colmenares et. al. v. Electro Scientific Industries, Inc. et al.

These lawsuits are purported class actions brought on behalf of Company stockholders, asserting various claims against members of the Board of Directors, MKS, and Merger Sub, including breach of fiduciary duty and aiding and abetting breach of fiduciary duty. The lawsuits allege that the Merger does not appropriately value the Company, and that the Company’s Merger related disclosures fail to disclose certain material information regarding the Merger. These complaints purport to seek unspecified damages and may seek injunctive relief preventing the consummation of the Merger.

The Company believes that the claims in these complaints are without merit and intends to vigorously defend this litigation. The Company provided supplemental Merger related disclosures to eliminate the burden and expense of litigation and to avoid any possible disruption to the Merger that could result from further litigation. An adverse judgment for monetary damages could have an adverse effect on the operations of the Company. A preliminary injunction could delay or jeopardize the completion of the Merger, and an adverse judgment granting permanent injunctive relief could indefinitely enjoin completion of the Merger.

The Company may also be party to various other litigations arising in the normal course of business. Currently, the Company is not party to any other litigation it believes would have a material adverse effect on the Company's financial position, results of operations or cash flows.

12. Shareholders’ Equity

Share Repurchase Program

In December 2011, the Board of Directors authorized a share repurchase program totaling $20.0 million to acquire shares of the Company's outstanding common stock. The repurchases are to be made at management’s discretion in the open market or in privately negotiated transactions in compliance with applicable securities laws and other legal requirements and are subject to market conditions, acceptable share price and other factors. The Company did not repurchase any shares during fiscal 2018 or the first three quarters of fiscal 2019. There is no expiration date for the repurchase program and $18.3 million still remains for future repurchases.

Table of Contents

13. Accumulated Other Comprehensive Income (Loss)

The following is a reconciliation of the changes in accumulated other comprehensive income (AOCI):



	Foreign currency translation adjustment			Accumulated other comprehensive income related to benefit plan obligation			Net unrealized loss on available-for-sale securities			Total
Balance at March 31, 2018	$	590		$	(16	)	$	(27	)	$	547
Other comprehensive (loss) income before reclassifications and taxes	(1,798		)	16			(1		)	(1,783		)
Amounts reclassified from AOCI	—			—			—			—
Tax effect	270			(5		)	—			265
Other Comprehensive (loss) income	(1,528		)	11			(1		)	(1,518		)
Balance at December 29, 2018	$	(938	)	$	(5	)	$	(28	)	$	(971	)

14. Share-Based Compensation

The Company's share-based compensation consists of restricted stock unit awards with a service condition (time-based RSUs), restricted stock unit awards with a market performance condition (market-based RSUs), restricted stock unit awards with a performance condition other than market performance (performance-based RSUs), an employee stock purchase plan and stock-settled stock appreciation rights (SARs).

The fair value of time-based and performance-based restricted stock units (RSUs) are measured on the grant date based on the market value of the Company's common stock. The market-based RSUs must achieve the total shareholder return (TSR) measures in order for the awards to vest, and the grant date fair value of the awards is calculated using a Monte Carlo simulation model. The Company recognizes expense related to the fair value of the 1990 Employee Stock Purchase Plan (ESPP) and SARs using the Black-Scholes model to estimate the fair value of awards on the date of grant.

Except for performance-based RSUs, the Company recognizes compensation expense for all share-based compensation awards, net of estimated forfeitures, on a straight-line basis over the requisite service period of the award. Expense for performance-based RSUs is recognized based on the probability of achievement of the performance criteria. The compensation cost for market-based RSUs is recognized over the related service period, even if the market condition is never satisfied. The impact of adjustments related to awards where the requisite service period was not completed is reflected as an offset to current period shared-based compensation expense.

The Company granted a total of 277,915 time-based RSUs and 92,500 market-based RSUs during the first three quarters of fiscal 2019, but did not grant any SARs or performance-based RSUs. No time-based RSUs were granted during the third quarter of fiscal 2019.

Share-based compensation expense under the stock incentive plans is included in the Company’s Condensed Consolidated Statements of Operations as follows:



	Fiscal quarter ended				Three fiscal quarters ended
(In thousands)	Dec 29, 2018		Dec 30, 2017		Dec 29, 2018		Dec 30, 2017
Cost of sales	$	109	$	64	$	337	$	208
Selling, general and administrative	1,271		498		3,698		2,629
Research, development and engineering	324		151		833		484
Total share-based compensation expense	$	1,704	$	713	$	4,868	$	3,321

The Company incurred $25 thousand of capitalizable share-based compensation costs during the first three quarters of fiscal 2019. The capitalizable cost was incurred for internal labor hours allocated to the enterprise resource planning software and related systems implementation, which will support the Company's operating and financial functions. No capitalized share-based compensation costs were incurred during fiscal 2018. As of December 29, 2018, the Company had $9.5 million of total unrecognized share-based compensation costs, net of estimated forfeitures, which are expected to be recognized over a weighted average period of 1.8 years.

15. Revenues, Product and Geographic Information

Operating segments are defined as components of an enterprise about which separate financial information is available and evaluated regularly by the chief operating decision maker (CODM) in deciding how to allocate resources and in assessing performance. The Company's CODM is its Chief Executive Officer (CEO).

The Company and its consolidated subsidiaries operate in a single segment, defined as a manufacturer of high-technology microfabrication and related equipment. This segment sells products into a variety of end markets that are grouped into four major categories for the purpose of providing an understanding of the principal end markets for the products manufactured by the Company, specifically: (1) Printed Circuit Board (PCB), (2) Component Test, (3) Semiconductor, and (4) Industrial Machining. Service sales are interrelated with all major end markets of the Company and are separately presented.

The following table presents net sales information by the four major market categories and associated service sales addressed by the Company's single segment:



	Fiscal quarter ended				Three fiscal quarters ended
(In thousands)	Dec 29, 2018		Dec 30, 2017		Dec 29, 2018		Dec 30, 2017
Printed Circuit Board	$	9,457	$	76,933	$	114,610	$	161,305
Component Test	31,896		6,504		59,856		20,959
Semiconductor	12,429		10,664		42,433		25,486
Industrial Machining	1,897		5,317		6,900		14,077
Service	12,263		11,422		40,684		32,664
Net sales	$	67,942	$	110,840	$	264,483	$	254,491

Table of Contents

The following table presents net sales information by timing of delivery:



	Fiscal quarter ended				Three fiscal quarters ended
(In thousands)	Dec 29, 2018		Dec 30, 2017		Dec 29, 2018		Dec 30, 2017
Point-in-time	$	62,607	$	104,202	$	246,561	$	237,022
Over-time	5,335		6,638		17,922		17,469
Net sales	$	67,942	$	110,840	$	264,483	$	254,491

Net sales by geographic area, based on the location of the end user, were as follows:



	Fiscal quarter ended				Three fiscal quarters ended
(In thousands)	Dec 29, 2018		Dec 30, 2017		Dec 29, 2018		Dec 30, 2017
Asia	$	56,748	$	103,069	$	232,448	$	233,685
Europe	6,127		5,340		17,490		11,269
Americas	5,067		2,431		14,545		9,537
Net sales	$	67,942	$	110,840	$	264,483	$	254,491

16. Restructuring and Cost Management Plans

2017 Corporate Restructuring:

In the fourth quarter of 2017, the Company initiated a restructuring plan to improve business effectiveness and streamline operations to achieve a stated target profit level for the Company as a whole. As a part of the restructuring plan, the management team was reorganized from a business unit to a functional structure; the Company closed facilities in Montreal, Canada; Napa, California; and Sunnyvale, California; the Company discontinued certain products; and the Company made select reductions in headcount across the Company. Actions under this plan were completed as of the end of the third quarter of fiscal 2018.

Total expenses related to the plan were $17.1 million in 2018, while no expenses have been incurred in the first three quarters of fiscal 2019. Included in the fiscal 2018 expenses are approximately $13.3 million of charges impacting gross margins, all incurred in the first and second quarters of fiscal 2018, primarily related to impairment of other assets and inventory stemming from the product portfolio program reviews which resulted in discontinuing certain products. Operating expense charges included $2.3 million of facilities and fixed assets charges related to streamlining facilities and discontinued products and $1.3 million of employee severance and related costs. Product portfolio reviews related to the restructuring plan were completed as of the end of the third quarter of fiscal 2018. The impacts of the decisions made in the portfolio reviews involve the use of certain estimates.

The following table presents the total costs incurred by category and expected restructuring costs as of December 29, 2018 (in thousands):



	Total Expected Costs for the Plan		Costs Recognized from inception of the plan through the Quarter ended Dec 29, 2018		Remaining Costs to be Recognized Subsequent to Dec 29, 2018
Employee severance and related personnel costs	$	4,925	$	4,925	$	—
Site closure costs	1,516		1,516		—
Current asset impairments and other gross profit charges⁽¹⁾	14,947		14,947		—
Non-current asset impairments	3,033		3,033		—
Other costs	239		239		—
Total	$	24,660	$	24,660	$	—

(1) Current asset impairments include inventory charges recorded in cost of sales.

Table of Contents

The following table presents the amounts payable related to the 2017 Corporate Restructuring (in thousands):



	Employee severance and related personnel costs			Site closure costs			Current asset impairments and other gross profit charges			Non-current asset impairments			Other Costs			Total
Balance as of April 1, 2017	$	3,247		$	888		$	—		$	—		$	—		$	4,135
Costs incurred	1,337			627			13,278			1,657			175			17,074
Cash payments	(4,445		)	(1,515		)	(2,402		)	32			(175		)	(8,505		)
Non-cash items	—			—			(10,876		)	(1,689		)	—			(12,565		)
Balance as of March 31, 2018	$	139		$	—		$	—		$	—		$	—		$	139
Costs incurred	—			—			—			—			—			—
Cash (payments) receipts	(58		)	—			—			—			—			(58		)
Non-cash items	—			—			—			—			—			—
Balance as of December 29, 2018	$	81		$	—		$	—		$	—		$	—		$	81

Other restructuring plans:

The Company's previously disclosed other restructuring plans are largely complete. No net restructuring costs related to these plans were recorded in the first three quarters of fiscal 2019 while $0.4 million were recorded in fiscal 2018. The Company does not expect to incur additional expenses related to these plans.

Overall restructuring reserve:

As of December 29, 2018, and March 31, 2018, the amount of unpaid restructuring costs included in accrued liabilities on the Consolidated Balance Sheets were $0.1 million and $0.4 million, respectively. Included in the payable balance are amounts for severance and employee benefits, and net lease commitments.

17. Income Taxes

The Tax Cuts and Jobs Act (the Tax Act) was enacted into law in the United States on December 22, 2017. The Tax Act includes various changes to the tax law, including a reduction in the U.S. corporate income tax rate from 35% to 21%.

The Tax Act added section 250 to the Internal Revenue Code, effectively creating a new preferential tax rate for income derived by domestic corporations from serving foreign markets. The new deduction is described as a deduction for foreign-derived intangible income. This lower tax rate provides a new benefit for owning intangible property and conducting business operations in the United States.

The Tax Act also includes a base erosion and anti-abuse tax (BEAT), applicable to corporations with annual gross receipts of at least $500 million for the prior 3-years, which requires U.S. multinationals making “excessive” deductible payments to their foreign affiliates to pay a 10 percent tax on their income without those deductions, after a one-year, 5 percent transition rate. The Company does not expect the BEAT provisions to apply until it meets the threshold. Further the Tax Act imposes a tax on global intangible low-taxed income (GILTI) on controlled foreign corporations’ aggregate net income over a 10% benchmark return on qualified business asset investment less interest expense. The Company continues to assess the impacts of these provisions on the Company’s financial position, results of operations or cash flows.

The Securities and Exchange Commission Staff Accounting Bulletin No. 118 (SAB 118) allows the use of provisional amounts in the Company’s financial statements during a measurement period if accounting for the income tax effects of the Tax Act has not been completed when the Company’s financial statements are issued. The Company has evaluated the new legislation and the additional technical guidance from the Department of Treasury, the FASB, and other relevant rule-making bodies issued to date and updated our financial position, results of operations, and cash flows based upon the available information. The SAB 118 impact relative to net income is an annual tax benefit of $1.8 million representing a 3.1% impact to the effective tax rate for the first three quarters and 31.5% impact to the third quarter. The accounting for the income tax effects of the Act are now complete.

18. Earnings Per Share

The following is a reconciliation of weighted average shares outstanding used in the calculation of basic and diluted earnings per share:



	Fiscal quarter ended				Three fiscal quarters ended
(In thousands, except per share data)	Dec 29, 2018		Dec 30, 2017		Dec 29, 2018		Dec 30, 2017
Net income	$	6,340	$	33,973	$	54,319	$	41,135
Weighted average shares used for basic earnings per share	34,769		34,224		34,623		33,839
Incremental diluted shares	1,206		1,786		1,504		1,723
Weighted average shares used for diluted earnings per share	35,975		36,010		36,127		35,562
Net income per share:
Basic	$	0.18	$	0.99	$	1.57	$	1.22
Diluted	$	0.18	$	0.94	$	1.50	$	1.16

RSUs and SARs representing an additional 0.1 million shares of stock for the third quarter of fiscal 2018 and 0.4 million shares of stock for the first three quarters of fiscal 2018 were not included in the calculation of diluted net earnings per share because their effect would have been antidilutive. Antidilutive shares were immaterial for the third quarter of fiscal 2019 and the first three quarters of fiscal 2019.

19. Merger Agreement

Merger Agreement

On October 29, 2018, the Company entered into an Agreement and Plan of Merger (the Merger Agreement) with MKS Instruments, Inc., a Massachusetts corporation (MKS) and EAS Equipment, Inc., a Delaware corporation and a wholly owned subsidiary of MKS (Merger Sub). The Merger Agreement provides for, subject to the terms and conditions of the Merger Agreement, the acquisition of the Company by MKS at a price of $30.00 per share in cash, without interest and subject to deduction for any required withholding tax, through the merger of Merger Sub into the Company (the Merger), with the Company surviving the Merger as a wholly owned subsidiary of MKS.

The Company incurred $4.3 million of merger and integration related costs during the third quarter of fiscal 2019.

See Note 20: Subsequent Events for events related to the Merger Agreement which occurred subsequent to the end of the third quarter of fiscal 2019.

20. Subsequent Events

Merger

On January 10, 2019, the Company held a special meeting of shareholders, and the Company's shareholders voted to approve the previously announced definitive merger agreement with MKS. All necessary regulatory and shareholder approvals are now complete, and subject to the satisfaction of certain remaining customary closing conditions, the transaction is expected to close in early February 2019. Upon the closing of the transaction, trading of the Company's shares on NASDAQ will cease.

Termination of Loan Agreement

On January 17, 2019 and in preparation for the merger with MKS, the Company terminated its Loan Agreement with the Lender, as referenced in Note 9: Long-term Debt, and extinguished the outstanding Loan by way of a $12.9 million cash payment. As part of the termination of the Loan Agreement, the deposit restrictions placed by the Lender on the Company are no longer required.

Termination of Revolving Debt Agreement

On January 17, 2019 and in preparation for the merger with MKS, the Company terminated its Credit Facility with SVB, as referenced in Note 10: Revolving Credit Facility, and extinguished any and all outstanding amounts under the Credit Facility.

Table of Contents

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The statements contained in this report that are not statements of historical fact, including without limitation statements containing the words “believes”, “expects”, “projects”, “anticipates,” “plan,” “continue,” “could,” “estimates,” “intends,” “should,” “will,” “may” and similar words, constitute forward-looking statements that are subject to a number of risks and uncertainties. Forward looking statements include any statements regarding anticipated sales, gross margins, our profitability in future periods, our proposed Merger with MKS, our expectations regarding customer processes and our products, our strategies and beliefs regarding the markets in which we compete or may compete and our product development plans to address these markets, the sufficiency of our financial resources to meet our working capital needs for at least the next 12 months, our expectations regarding taxes and tax adjustments, particularly with respect to the Tax Act, our expectations regarding various legal matters, our ability to rapidly increase our production capacity to accommodate demand, sources of our future revenue, the effect of new or recently adopted accounting standards on our business, financial results, results of operations or cash flows, future impairment of goodwill, future anticipated net warranty costs, our products’ ability to satisfy the needs of manufacturers, our relationships with suppliers and customers, trends that drive increases in applications for laser processing, the size and growth of our markets, increased use of our MLCC components, strong global demand for consumer electronics, automotive and other devices using radio frequency for communications, our expected inventory levels, our expected capital expenditures over the next 12 months, our growth of foreign operations, our customer concentrations, the adequacy of our liquidity and financing and our expectations regarding access to credit and our compliance with the covenants of our Credit Facility, our expectation that we will invest in new product development and enhancements, and our working capital requirements and resources. From time to time, we may make other forward-looking statements. Investors are cautioned that such forward-looking statements involve estimates, assumptions, risks, and uncertainties and are subject to an inherent risk that actual results may differ materially. Factors that may cause or contribute to differences include those discussed below in Item 1A Risk Factors.

Overview of Business

Electro Scientific Industries, Inc., and its wholly-owned subsidiaries (ESI, we, our, or the Company), is a leading supplier of innovative laser-based microfabrication solutions for industries reliant on microtechnologies. ESI enables its customers to commercialize technology using precision laser processes. ESI's solutions produce the industry's highest quality and throughput, and we target the lowest total cost of ownership. Founded in 1944, ESI is headquartered in Portland, Oregon, with global operations and subsidiaries in Asia, Europe and North America.

Laser microfabrication comprises a set of precise micron-level processes, including drilling, scribing, dicing, singulation, cutting, ablating, trimming, and precision marking on multiple types of materials. These processes require application-specific laser systems that are able to meet our customers’ exacting performance and productivity requirements. Our laser-based systems are utilized in the production of flexible and rigid printed circuit board (PCB), semiconductor devices, advanced semiconductor packaging, consumer electronics, electronic sensors, touch-panel glass, flat panel liquid crystal displays (LCDs), organic light emitting diode (OLED) displays, applications within the automotive, aerospace, medical and display end markets as well as other high-value components and devices to enable functionality, increase performance and improve production yields.

Additionally, we produce high-capacity test and inspection equipment that is critical to the quality control process during the production of multilayer ceramic capacitors (MLCCs). Our equipment ensures that each component meets the electrical and physical tolerances required to perform properly.

The third quarter of fiscal 2019 ended December 29, 2018, the second quarter of fiscal 2019 ended September 29, 2018, and the third quarter of fiscal 2018 ended December 30, 2017 were all 13-week periods. Similarly, the three fiscal quarters ended December 29, 2018 and the three fiscal quarters ended December 30, 2017 each consisted of 39-week periods.

Merger Agreement with MKS Instruments, Inc.

On October 29, 2018, we entered into an Agreement and Plan of Merger (the “Merger Agreement”) with MKS Instruments, Inc., a Massachusetts corporation (MKS) and EAS Equipment, Inc., a Delaware corporation and a wholly owned subsidiary of MKS (Merger Sub). The Merger Agreement provides for, among other things, the acquisition by MKS of the Company. See Note 19: Merger Agreement of the Notes to Condensed Consolidated Financial Statements for additional information. Please also see Item 1A. Risk Factors. See Note 20: Subsequent Events for events related to certain closing conditions of the Merger and the Loan Agreement which occurred subsequent to the end of the third quarter of fiscal 2019.

Table of Contents

Results of Operations

Third Quarter of Fiscal 2019 Highlights:

•

Total net sales decreased from the second quarter of fiscal 2019 by 21% to $67.9 million in the third quarter of fiscal 2019 primarily driven by decreased sales in the PCB market due to a softening in demand for flex products as customers continue to absorb the significant level of shipments over the last two years. The declines in PCB market sales were partially offset by continued increases in sales to the Component Test market due to increased use of MLCC components, particularly in consumer electronics and automotive applications, which require our tools for processing.


•	Gross margin was 38.5% in the third quarter of fiscal 2019, down from 45.5% in the second quarter of fiscal 2019, primarily due to change in product mix and lower net sales.


•	Operating expenses were $22.3 million in the third quarter of fiscal 2019, and represent a $2.4 million increase compared to the second quarter of fiscal 2019. The increase was primarily driven by $4.3 million of merger related costs such as legal and professional fees.


•	Net income was $0.18 per diluted share, compared to $0.47 per share in the prior quarter, on lower sales and gross profit combined with higher operating expenses.

Third Quarter Ended December 29, 2018 Compared to Third Quarter Ended December 30, 2017

The following table presents results of operations data as a percentage of net sales:



	Fiscal quarter ended
	Dec 29, 2018		Dec 30, 2017
Net sales	100.0	%	100.0	%
Cost of sales	61.5		52.0
Gross profit	38.5		48.0
Selling, general and administrative	13.8		10.0
Research, development and engineering	12.7		7.4
Merger and integration costs	6.3		—
Restructuring costs	—		0.6
Operating income	5.7		30.0
Interest and other income (expense), net	2.9		0.7
Total non-operating income (loss)	2.9		0.7
Income before income taxes	8.6		30.7
Provision for income taxes	(0.7	)	—
Net income	9.3	%	30.7	%

Net Sales

The following table presents net sales information by the five major product categories addressed by the Company's single segment:



	Fiscal quarter ended
	Dec 29, 2018				Dec 30, 2017
(In thousands, except percentages)	Net Sales		% of Net Sales		Net Sales		% of Net Sales
Printed Circuit Board	$	9,457	13.8	%	$	76,933	69.4	%
Component Test	31,896		46.9		6,504		6.0
Semiconductor	12,429		18.3		10,664		9.6
Industrial Machining	1,897		2.8		5,317		4.8
Service	12,263		18.0		11,422		10.3
Net sales	$	67,942	100.0	%	$	110,840	100.0	%

Net sales for the third quarter of fiscal 2019 was $67.9 million, a decrease of $42.9 million or 39% when compared to net sales for the third quarter of fiscal 2018.

Table of Contents

Sales of products into the PCB market for the third quarter of fiscal 2019 decreased $67.5 million or 88% compared to the third quarter of fiscal 2018. During the third quarter of fiscal 2018, the flex market was in a period of very strong market demand driven by unit growth in consumer electronics and associated capacity additions plus new materials, technologies and applications that required increased levels of complex flexible circuits. Now that the market is absorbing the capacity added as a result of the strong demand environment, we're seeing significant declines, as evidenced by our third quarter of fiscal 2019 PCB sales.

Sales of products into the Component Test market for the third quarter of fiscal 2019 increased $25.4 million or 390% compared to the third quarter of fiscal 2018, primarily driven by equipment capacity shortages resulting from increased demand for MLCC components, particularly in consumer electronics and automotive applications, many of which require our tools for processing.

Sales of products into Semiconductor applications for the third quarter of fiscal 2019 increased $1.8 million or 17% compared to the third quarter of fiscal 2018. This increase was primarily driven by increased sales of our wafer mark systems.

Sales of products into Industrial Machining applications for the third quarter of fiscal 2019 decreased $3.4 million or 64% compared to the third quarter of fiscal 2018. This was primarily due to decreased sales of micromachining systems into PCB cutting applications.

Service revenues for the third quarter of fiscal 2019 increased $0.8 million or 7% compared to the third quarter of fiscal 2018. The increase was primarily driven by increased time and materials contracts resulting from products that we shipped in the last 18 months beginning to come off their warranty period.

The following table presents net sales information by geographic region:



	Fiscal quarter ended
	Dec 29, 2018				Dec 30, 2017
(In thousands, except percentages)	Net Sales		% of Net Sales		Net Sales		% of Net Sales
Asia	$	56,748	83.6	%	$	103,069	93.0	%
Europe	6,127		9.0		5,340		4.8
Americas	5,067		7.5		2,431		2.2
Net sales	$	67,942	100.0	%	$	110,840	100.0	%

Net sales to Asia decreased by $46.3 million or 45% primarily due to lower sales of flex tools to the PCB market on softening demand and overcapacity, partially offset by higher sales of our MLCC testing tools.

Gross Profit



	Fiscal quarter ended
	Dec 29, 2018				Dec 30, 2017
(In thousands, except percentages)	Gross Profit		% of Net Sales		Gross Profit		% of Net Sales
Gross Profit	$	26,138	38.5	%	$	53,156	48.0	%

Gross profit was $26.1 million for the third quarter of fiscal 2019, a decrease of $27.0 million compared to $53.2 million in the third quarter of fiscal 2018. The gross profit decrease was primarily driven by lower net system sales and changes in mix to lower profit systems.

Operating Expenses



	Fiscal quarter ended
	Dec 29, 2018				Dec 30, 2017
(In thousands, except percentages)	Expense		% of Net Sales		Expense		% of Net Sales
Selling, general and administrative	$	9,376	13.8	%	$	11,040	10.0	%
Research, development and engineering	8,609		12.7		8,165		7.4
Restructuring costs	—		—		706		0.6
Merger and integration costs	4,277		6.3		—		—
Operating Expenses	$	22,262	32.8	%	$	19,911	18.0	%

Table of Contents

Selling, General and Administrative

Selling, general and administration (SG&A) expenses primarily consist of labor and other employee-related expenses, including share-based compensation expense, travel expenses, professional fees, sales commissions and facilities costs. SG&A expenses for the third quarter of fiscal 2019 decreased $1.7 million compared to the third quarter of fiscal 2018. The decrease was primarily driven by lower variable expenses and restructuring actions taken in the prior year.

Research, Development and Engineering

Research, development and engineering (RD&E) expenses primarily comprise labor and other employee-related expenses, including share-based compensation expense, professional fees, project materials costs, equipment costs and facilities costs. RD&E expenses for the third quarter of fiscal 2019 increased $0.4 million compared to the third quarter of fiscal 2018, primarily due to increased consulting and materials costs related to investment in new product development.

Restructuring Costs

In the fourth quarter of fiscal 2017, we initiated a restructuring plan to improve business effectiveness, streamline operations and achieve a stated target cost level for the Company as a whole. Restructuring costs of $0.7 million in the third quarter of fiscal 2018 primarily related to severance payments made to a departed executive. There were no restructuring costs in the third quarter of fiscal 2019. See Note 16: Restructuring and Cost Management Plans for further discussion.

Merger and Integration Costs

In the third quarter of fiscal 2019, the Company incurred $4.3 million of merger related costs such as legal and professional fees related to the Merger. See Note 19: Merger Agreement, and Note 20: Subsequent Events.

Non-operating Income and Expense



	Fiscal quarter ended
	Dec 29, 2018				Dec 30, 2017
(In thousands, except percentages)	Non-Operating Income		% of Net Sales		Non-Operating Income		% of Net Sales
Interest and other income, net	$	1,985	2.9	%	$	789	0.7	%
Total non-operating income	$	1,985	2.9	%	$	789	0.7	%

Non-operating income, net, consists of interest income and expense, market gains and losses on non-operating assets, realized and unrealized foreign exchange gains and losses, bank charges, investment management fees, gains related to the sale of the LAD business and other miscellaneous non-operating items, such as investment impairment. Net non-operating income was $2.0 million in the third quarter of fiscal 2019 compared to $0.8 million in the third quarter of fiscal 2018. The increased income in the third quarter of fiscal 2019 was primarily due to $1.6 million of gain related to the finalization of our laser ablation asset sale compared to $0.6 million of gain in the third quarter of fiscal 2018.

Income Taxes



	Fiscal quarter ended
	Dec 29, 2018					Dec 30, 2017
(In thousands, except percentages)	Income Tax Benefit			Effective Tax Rate		Income Tax Provision		Effective Tax Rate
(Benefit from) provision for income taxes	$	(479	)	(8.2	)%	$	61	0.2	%

The income tax benefit for the third quarter of fiscal 2019 was $0.5 million on pretax income of $5.9 million for an effective tax rate of (8.2)%, compared to a $61 thousand tax provision on pretax income of $34.0 million for an effective tax rate of 0.2% in the third quarter of fiscal 2018. The 2019 effective tax rate is lower due to lower corporate tax rates, inclusion of foreign derived intangible income tax deduction and the completion of SAB 118 measurement period resulting in a current quarter benefit of 31.5% and release of additional valuation allowance.

Three Quarters Ended December 29, 2018 Compared to Three Quarters Ended December 30, 2017

Results of Operations

The following table presents results of operations data as a percentage of net sales:



	Three fiscal quarters ended
	Dec 29, 2018		Dec 30, 2017
Net sales	100.0	%	100.0	%
Cost of sales	55.2		58.3
Gross profit	44.8		41.7
Selling, general and administrative	11.5		13.9
Research, development and engineering	10.5		10.0
Merger and integration costs	1.6		—
Restructuring costs	—		1.6
Operating income	21.2		16.2
Interest and other income (expense), net	1.0		0.1
Total non-operating income (loss)	1.0		0.1
Income before income taxes	22.2		16.3
Provision for income taxes	1.7		0.1
Net income	20.5	%	16.2	%

Net Sales

The following table presents net sales information by product group:



	Three fiscal quarters ended
	Dec 29, 2018				Dec 30, 2017
(In thousands, except percentages)	Net Sales		% of Net Sales		Net Sales		% of Net Sales
Printed Circuit Board	$	114,610	43.3	%	$	161,305	63.4	%
Component Test	59,856		22.6		20,959		8.2
Semiconductor	42,433		16.0		25,486		10.0
Industrial Machining	6,900		2.6		14,077		5.5
Service	40,684		15.4		32,664		12.8
Net sales	$	264,483	100.0	%	$	254,491	100.0	%

Net sales for the first three quarters of fiscal 2019 increased $10.0 million or 4% from net sales for the first three quarters of fiscal 2018.

Table of Contents

Sales of products into the PCB market for the first three quarters of fiscal 2019 decreased $46.7 million or 29% compared to the first three quarters of fiscal 2018. During the first three quarters of fiscal 2018 the flex market was in a period of very strong market demand driven by unit growth in consumer electronics and associated capacity additions plus new materials, technologies and applications that require increased levels of complex flexible circuits. During the first three quarters of fiscal 2019, the market has softened from that very strong demand environment as the market absorbs the high level of flex drilling capacity shipped in fiscal 2018 and as evidenced by our third quarter of fiscal 2019 PCB sales.

Sales of products into the Component Test market for the first three quarters of fiscal 2019 increased $38.9 million or 186% compared to the first three quarters of fiscal 2018, primarily driven by equipment capacity shortages resulting from increased demand for MLCC components, particularly in consumer electronics and automotive applications, many of which require our test tools for processing.

Sales of products into the Semiconductor market for the first three quarters of fiscal 2019 increased $16.9 million or 66% compared to the first three quarters of fiscal 2018. This increase was primarily driven by increased sales of our new Ultrus^TM wafer scribing tool and our wafer mark products.

Sales of products into Industrial Machining applications for the first three quarters of fiscal 2019 decreased $7.2 million or 51% compared to the first three quarters of fiscal 2018. This was primarily due to decreased sales of micromachining systems into PCB cutting applications.

Service revenues for the first three quarters of fiscal 2019 increased $8.0 million or 25% compared to the first three quarters of fiscal 2018. The increase was primarily driven by increased spare parts revenues resulting from products that we shipped in the last 18 months beginning to come off their warranty period.

The following table presents net sales information by geographic region:



	Three fiscal quarters ended
	Dec 29, 2018				Dec 30, 2017
(In thousands, except percentages)	Net Sales		% of Net Sales		Net Sales		% of Net Sales
Asia	$	232,448	87.9	%	$	233,685	91.8	%
Europe	17,490		6.6		11,269		4.4
Americas	14,545		5.5		9,537		3.7
Net sales	$	264,483	100.0	%	$	254,491	100.0	%

Net sales in Asia decreased slightly to $232.4 million in the first three quarters of fiscal 2019, a decrease of $1.2 million compared to $233.7 million in the first three quarters of fiscal 2018 with decreases in flex sales to the PCB market being mostly offset by higher sales of our MLCC testing tools. Europe sales increased primarily due to higher sales of circuit trim products. Net sales to Americas increased primarily due to flex sales to the PCB market and increased sales of wafer trim products.

Gross Profit



	Three fiscal quarters ended
	Dec 29, 2018				Dec 30, 2017
(In thousands, except percentages)	Gross Profit		% of Net Sales		Gross Profit		% of Net Sales
Gross Profit	$	118,403	44.8	%	$	106,108	41.7	%

Gross profit was $118.4 million for the first three quarters of fiscal 2019, an increase of $12.3 million compared to the first three quarters of fiscal 2018. The gross profit increase was primarily driven by $13.3 million of inventory and other asset impairment charges in the first three quarters of fiscal 2018 which did not recur in the first three quarters of fiscal 2019 and higher net sales, partially offset by increased manufacturing expenses and absorption costs.

Table of Contents

Operating Expenses



	Three fiscal quarters ended
	Dec 29, 2018				Dec 30, 2017
(In thousands, except percentages)	Expense		% of Net Sales		Expense		% of Net Sales
Selling, general and administrative	$	30,344	11.5	%	$	35,496	13.9	%
Research, development and engineering	27,821		10.5		25,373		10.0
Restructuring costs	—		—		4,079		1.6
Merger and integration costs	4,277		1.6		—		—
Operating Expenses	$	62,442	23.6	%	$	64,948	25.5	%

Selling, General and Administrative

SG&A expenses primarily consist of labor and other employee-related expenses including share-based compensation expense, travel expenses, professional fees, sales commissions and facilities costs. SG&A expenses for the first three quarters of fiscal 2019 decreased $5.2 million compared to the first three quarters of fiscal 2018. The decrease was primarily due to lower variable expenses and restructuring actions taken in prior periods.

Research, Development and Engineering

RD&E expenses primarily comprise labor and other employee-related expenses including share-based compensation expense, professional fees, project materials costs, equipment costs and facilities costs. RD&E expenses for the first three quarters of fiscal 2019 increased $2.4 million compared to the first three quarters of fiscal 2018. The increase was primarily due to increased consulting and materials costs related to investment in new product development.

Restructuring Costs

In the fourth quarter of fiscal 2017, we initiated a restructuring plan to improve business effectiveness, streamline operations and achieve a stated target cost level for the Company as a whole. Restructuring costs of $4.1 million incurred in the first three quarters of fiscal 2018 primarily consisted of $1.7 million of fixed asset write-offs, $0.8 million of facilities lease obligations, and $1.4 million of severance and related benefits charges. There were no restructuring costs in the first three quarters of fiscal 2019. See Note 16: Restructuring and Cost Management Plans for further discussion.

Merger and Integration Costs

In the first three quarters of fiscal 2019, the Company incurred $4.3 million of merger related costs such as legal and professional fees related to the Merger. See Note 19: Merger Agreement, and Note 20: Subsequent Events.

Non-operating Income and Expense



	Three fiscal quarters ended
	Dec 29, 2018				Dec 30, 2017
(In thousands, except percentages)	Non-Operating Income		% of Net Sales		Non-Operating Income		% of Net Sales
Interest and other income, net	$	2,820	1.0	%	$	376	0.1	%
Total non-operating income	$	2,820	1.0	%	$	376	0.1	%

Non-operating income, net, consists of interest income and expense, market gains and losses on non-operating assets, realized and unrealized foreign exchange gains and losses, bank charges, investment management fees, gains related to the sale of the LAD business, and other miscellaneous non-operating items, such as investment impairment. Net non-operating income was $2.8 million in the first three quarters of fiscal 2019 compared to income of $0.4 million in the first three quarters of fiscal 2018. The change in non-operating income was primarily due to gains related to the finalization of the LAD sale as well as increased interest income due to our increased investments balance and gains from foreign exchange fluctuations.

Table of Contents

Income Taxes



	Three fiscal quarters ended
	Dec 29, 2018				Dec 30, 2017
(In thousands, except percentages)	Income Tax Provision		Effective Tax Rate		Income Tax Provision		Effective Tax Rate
Provision for income taxes	$	4,462	7.6	%	$	401	1.0	%

The income tax provision for the first three quarters of fiscal 2019 was $4.5 million on pretax income of $58.8 million, an effective tax rate of 7.6%. The 2019 effective tax rate is higher relative to 2018 due to the release of valuation allowance in 2018. For the first three quarters of fiscal 2018, the income tax provision was $401 thousand on pretax income of $41.5 million, an effective rate of 1.0%.

Financial Condition and Liquidity

At December 29, 2018, our principal sources of liquidity were cash and cash equivalents of $52.1 million, short-term investments of $123.1 million, current accounts receivable of $55.6 million and up to $30.0 million from our Credit Facility (see Note 10: Revolving Credit Facility and Note 20: Subsequent Events) for a total of $260.8 million, as compared to $217.0 million at March 31, 2018 and $204.7 million at December 30, 2017. At December 29, 2018, we had a current ratio of 5.20 with long-term debt outstanding of $12.4 million (see Note 9: Long-term Debt and Note 20: Subsequent Events). Working capital of $259.6 million increased $56.4 million compared to the March 31, 2018 balance of $203.2 million, driven primarily by higher current asset balance due to improved business levels, specifically in our cash, cash equivalents, and short-term investments balances.

Sources and Uses of Cash

Net cash provided by operating activities of $57.3 million for the three fiscal quarters ended December 29, 2018 was primarily a result of $54.3 million in net income and a decrease in trade receivables of $7.6 million offset by a decrease in accounts payable and accrued liabilities of $21.6 million.

For the three fiscal quarters ended December 29, 2018, net cash used in investing activities was $80.6 million, primarily due to $76.1 million of net purchases of investments. For the three fiscal quarters ended December 29, 2018, net cash used in financing activities was $0.1 million.

A wholly-owned subsidiary of the Company has a loan agreement with First Technology Federal Credit Union that provides for a ten-year term loan with a principal amount of $14 million and with an interest rate fixed at 4.75% per annum, which will come due January 1, 2027. The Company is required to maintain certain deposits with the Lender through March 31, 2019, at which point the restriction will be removed as long as it is in compliance with certain minimum covenants. At December 29, 2018, restricted cash associated with this requirement was $1.1 million and the Company was in compliance with the covenants of the loan. See Note 20: Subsequent Events for events related to the Credit Facility which occurred subsequent to the end of the third quarter of fiscal 2019.

The Company is also party to a loan and security agreement (Credit Facility) with Silicon Valley Bank (SVB) that provides for a senior secured asset-based revolving facility with availability up to $30 million, including a $15 million sublimit for letters of credit. At December 29, 2018, the Company had no amounts outstanding under the Credit Facility. The Credit Facility expires March 20, 2019. If the Company fails to meet the covenants in the credit facility or the lenders fail to fund, access to the facility may be limited or the facility may become unavailable altogether. Refer to Note 9: Long-term Debt and Note 10: Revolving Credit Facility of the Company's condensed consolidated financial statements for further information. See Note 20: Subsequent Events for events related to the Loan Agreement which occurred subsequent to the end of the third quarter of fiscal 2019.

The Company is expected to incur capital expenditures of approximately $6 million in the next twelve months primarily due to the upgrade of its enterprise resource planning software and related systems that support its operating and financial functions.

We believe that our existing cash, cash equivalents and short-term investments are adequate to fund our operations, capital expenditures and contractual obligations for at least the next twelve months.

Critical Accounting Policies and Estimates

We reaffirm the “Critical Accounting Policies and Estimates” in Part II Item 7, Management's Discussion and Analysis of Financial Condition and Results of Operations, reported in our Form 10-K for the year ended March 31, 2018. Due to the adoption of accounting standard ASC 606 in the first quarter of fiscal 2019 using the modified retrospective transition approach, we have updated certain revenue related policies, see Note 1: Basis of Presentation.

Table of Contents

Item 3. Quantitative and Qualitative Disclosures about Market Risk

There have been no material changes in the market risk disclosure contained in our Form 10-K for the year ended March 31, 2018.

Item 4. Controls and Procedures

Attached to this quarterly report as Exhibits 31.1 and 31.2 are the certifications of our President and Chief Executive Officer (CEO) and our Chief Financial Officer (CFO) required by Section 302 of the Sarbanes-Oxley Act of 2002 (the Section 302 Certifications). This portion of our quarterly report on Form 10-Q is our disclosure of the conclusions of our management regarding the effectiveness of our disclosure controls and procedures as of the end of the period covered by this report based on management’s evaluation of those disclosure controls and procedures. This disclosure should be read in conjunction with the Section 302 Certifications for a more complete understanding of the topics presented.

Disclosure Controls and Procedures

Our management has evaluated, under the supervision and with the participation of our CEO and CFO, the effectiveness of our disclosure controls and procedures, as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as amended (Exchange Act) as of the end of the period covered by this report pursuant to Rule 13a-15(b) under the Exchange Act. Based on that evaluation, our CEO and CFO have concluded that, as of the end of the period covered by this report, our disclosure controls and procedures were effective in ensuring that information required to be disclosed in our Exchange Act reports is (1) recorded, processed, summarized and reported in a timely manner, and (2) accumulated and communicated to our management, including our CEO and CFO, as appropriate to allow timely decisions regarding required disclosure.

Changes in Internal Control Over Financial Reporting

There has been no change in our internal control over financial reporting during the third quarter of fiscal 2019 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Table of Contents

PART II - OTHER INFORMATION

Item 1. Legal Proceedings

We are also involved in various routine legal matters in the ordinary course of business, either asserted or unasserted, and investigations incidental to the business. In the opinion of management, ultimate resolution of these matters will not have a material effect on our consolidated financial position, results of operations or cash flows.

Item 1A. Risk Factors

The following risks and uncertainties should be read carefully with the other information included in this quarterly report. If any of the risks described below occur, our business, financial condition, operating results and cash flows could be materially and adversely affected. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us or that we currently deem immaterial also may impair our business operations and financial results. All references to years or quarters relate to fiscal years or fiscal quarters unless otherwise noted.

Risks Related to the Merger

Our proposed merger with MKS may not be completed within the expected time frame, or at all, and the failure to complete the Merger could adversely affect our business and the market price of our common stock.

On October 29, 2018, we entered into the Merger Agreement with MKS and Merger Sub, pursuant to which we would become a wholly-owned subsidiary of MKS if the Merger is completed. Though our shareholders approved the Merger on January 10, 2019, the Merger Agreement remains subject to closing conditions beyond our control including the absence of certain adverse changes in our business, and there is no guarantee that these conditions will be satisfied in a timely manner or at all. If any of the conditions to the proposed Merger are not satisfied (or waived by the other party), the Merger might not be completed. In addition, the Merger Agreement may be terminated under specified circumstances.

Table of Contents

Failure to complete the Merger could adversely affect our business and the market price of our common stock in a number of ways, including:


•	If the Merger is not completed, and no other party is willing and able to acquire us at an equivalent price or higher, on terms acceptable to us, the share price of our common stock may decline;


•	We have incurred, and continue to incur, significant expenses for professional services in connection with the proposed Merger, for which we will have received little or no benefit if the Merger is not completed. Many of these fees and costs will be payable even if the Merger is not completed and may relate to activities that we would not have undertaken other than to complete the Merger;


•	A failed Merger may result in negative publicity and/or give a negative impression of us in the investment community or business community generally; and


•	If the Merger Agreement is terminated under specified circumstances, we may be required to pay MKS a $35.65 million termination fee.

The pendency of our proposed Merger with MKS could adversely affect our business, financial condition, and results of operations.

The pendency of our proposed Merger with MKS could disrupt our business and create uncertainty about it, which could have an adverse effect on our business, financial condition, and results of operations, regardless of whether the Merger is completed. These risks to our business, all of which could be exacerbated by a delay in the completion of the Merger, include:


•	diversion of significant management time and resources towards the completion of the Merger;


•	impairment of our ability to attract and retain key personnel;


•	difficulties maintaining relationships with employees, customers, and other business partners;


•	restrictions on the conduct of our business prior to the completion of the Merger, which prevent us from taking specified actions without the prior consent of MKS, which we might otherwise take in the absence of the Merger Agreement; and


•	potential litigation relating to the Merger and the related costs.

Risks Related to Our Competition and Customers

Substantial competition in markets in which we operate may result in price reductions, reduced profit margins and loss of market share.

We face substantial competition from established competitors throughout the world, some of which have greater financial, engineering, manufacturing and marketing resources than we do. Competitors with greater resources may better withstand periodic downturns, compete more effectively on the basis of price and technology, utilize better established sales channels and customer relationships, or more quickly enhance or develop new generations of products that compete with our products, in addition to other advantages. New companies may enter the markets in which we compete, or industry consolidation may occur, further increasing competition in those markets. We have also experienced new entrants to our markets offering aggressive price and payment terms in an attempt to gain market share. Some competitors, particularly in China, also develop low-cost products employing processes or technology developed by us. In addition, because we frequently price our products in U.S. dollars, a strong U.S. dollar can make our products less price-competitive outside of the United States to products priced in other currencies. We believe that to be competitive, we must continue to expend significant financial resources in order to invest in new product development and enhancements, among other things. We may not be able to compete successfully in the future and increased competition may result in price reductions, reduced profit margins and loss of market share.

Our future success depends on our ability to expand into new markets.

Our future success and growth plans depend in large part on our successful entry into new markets adjacent to our existing markets, such as high-density interconnect drilling, interconnect packaging, advanced wafer scribing, and other industrial and consumer electronics markets, including automotive, aerospace, medical and display. These markets are new to us and our success depends on our displacing entrenched competitors who are familiar with these markets and are known to customers. In many cases, we are attempting to enter or expand our presence in these new markets with newly introduced products that are not yet proven in the industry. In addition, in some cases we need to develop or expand our sales channels and customer relationships in order to execute on this strategy. We provide no assurance that we will succeed in gaining significant, or any, market share in these new markets. If we fail to successfully expand into these markets, we will have difficulty growing our business and may lose business to our competitors.

Table of Contents

Volatility in our customers’ industries and capital spending can have a direct and material impact on our business.

Our business depends upon the capital equipment expenditures of manufacturers of microelectronics, PCBs, semiconductors, computers, wireless communications and other electronic products. The capital equipment market for the production of those products has historically been characterized by cyclical variations in capital equipment demand. These sometimes sudden and severe cycles may result from a number of factors, including overall consumer and industrial spending and demand for electronic products that drive manufacturer production, as well as the manufacturer's capacity utilization, timing of new product introductions and demand for customers’ products, inventory levels relative to demand and access to affordable capital. The timing, severity and duration of these market cycles are difficult to predict. As a result, our business can vary significantly from quarter to quarter or year to year, as evidenced, for example, by comparing sales of flex PCB in fiscal 2017 to fiscal 2018 with a significant increase in market demand and then to fiscal 2019 where we are seeing a significant softening in the flex PCB market. Downturns particularly affect our profitability given the relative fixed cost structure of our business and the need to continually invest in product technology and support and service for our products.

Increased pressure on price may result in pricing concessions, extended payment terms and decreased margins.

We have experienced and continue to experience pricing pressure from both competitors and customers in the sale of our products. Pricing pressures typically have become more intense during cyclical downturns when competitors seek to maintain or increase market share, reduce inventory or introduce more technologically advanced or lower-cost products. In addition, we may agree to pricing concessions or extended payment terms with our customers in connection with expanding into new markets or gaining volume orders, or to improve our customer cost of ownership in highly competitive applications. Our business, financial condition, margins or results of operations may be materially and adversely affected by competitive pressure and price-based competition.

A majority of our revenues are generated from exports to foreign countries, primarily in Asia, which could be adversely affected by political or economic instability, foreign competition, pricing pressures and other factors.

Political or economic instability, particularly in Asia, may adversely impact the demand for capital equipment, including equipment of the type we manufacture and market. In addition, we face intense competition from a number of Asian suppliers that have certain advantages over other suppliers, including us. These advantages include, among other things, proximity to customers, lower cost structures, favorable tariffs and affiliation with significantly larger organizations. In addition, changes in the amount or price of our products produced in Asia could impact the profitability or capital equipment spending programs of our foreign and domestic customers.

We could be negatively affected by ongoing trade disputes and tariffs.

As a result of recent U.S. tariffs on goods imported to the US from China, China added substantial retaliatory tariffs on certain products manufactured in the U.S. and imported to China. We cannot predict what actions may ultimately be taken with respect to tariffs or trade relations between the United States and other countries, what products may be subject to such actions, or what actions may be taken by the other countries in retaliation. Should our products be impacted by these or similar tariffs or trade restrictions, our ability to compete with local suppliers could be impacted and our business, financial condition, margins or results of operations may be materially and adversely affected. Our sales into China were approximately 40% and 20% of our total net sales in fiscal 2018 and in the first three quarters of fiscal 2019, respectively. However, approximately 90% of our systems shipped into China are manufactured in our Singapore facility and therefore have a country of origin of Singapore, which presently are not affected by tariffs. We cannot predict whether tariffs would become extended to our Singapore operation or a U.S.-owned business.

Because our revenues largely depend on few customers and certain end markets, we have a greater degree of risk if we lose one of those customers, if we fail to win on new product designs, or if end markets are negatively impacted.

We depend on a few significant customers for a large portion of our revenues, and certain of these customers may be suppliers to relatively few end manufacturers. In the third quarter of fiscal 2019, our top ten customers accounted for approximately 63% of total net sales with our top two customers accounting for 16% and 13% of total net sales, respectively. These concentrations can vary significantly from quarter to quarter and materially impact revenues and results from operations. For example, in fiscal 2018, we had one quarter where our concentration with a single customer was 50% of net sales. We anticipate that sales of our products to a relatively small number of customers will continue to account for a significant portion of our revenues.

Consolidation between customers, changes in technologies or solutions used by customers, changes in products manufactured by customers or in end-user demand for those products, selection of suppliers other than us, customer bankruptcies or customer departures from their respective industries all may result in even fewer customers accounting for a high percentage of our revenue and reduced demand from any single major customer. A change in demand from end manufacturers, or the customers of our direct

Table of Contents

customers, may impact the demand we receive across multiple direct customers. Additionally, if the end manufacturers have significant share in their end markets, demand from our customer base could be sensitive to, and be broadly impacted by, negative movements in those end markets. The level of sales to our top customers often depends on winning bids on new designs and features each product cycle, and there is no guarantee of future business based on past design wins.

None of our customers have any long-term obligation to continue to buy our products or services and may therefore delay, reduce or cease ordering our products or services at any time. The cancellation, reduction or deferral of purchases of our products by even a single customer could significantly reduce our revenues in any particular quarter. If we lose any of our significant customers, including as a result of any shipment delays due to heightened production levels, or suffer a material reduction in their purchase orders, revenue could decline and our business, financial condition and results of operations could be materially and adversely affected.

Because our revenues are largely based on the sale of a small quantity of product units, our operating results could fluctuate significantly from quarter to quarter.

We derive a substantial portion of our revenue from the sale of a relatively small quantity of products. Accordingly, our revenues, margins and other operating results could fluctuate significantly from quarter to quarter depending upon a variety of factors in addition to those described above, including:


•	the timing of orders and terms or acceptance of product shipments by our customers;


•	the mix of products and services that we sell in a given quarter;


•	timing and market acceptance of our new product introductions; and


•	delays or problems in the planned introduction of new products, or in the performance of any such products following delivery to customers.

As a result of these risks, we believe that quarter-to-quarter comparisons of our revenue and operating results may not be meaningful, and that these comparisons may not be an accurate indicator of our future performance.

Risks Related to Our Supply Chain and Production

Limitations on our ability to rapidly change our production capacity in a cost-effective manner could result in lower gross margins during sudden downturns and an inability to meet demand in sudden upturns.

To meet rapid changes in demand, such as we have experienced recently, we must effectively manage our resources and production capacity. When upturns occur, it may be difficult to rapidly and effectively increase our manufacturing capacity, or we may be unable to do so, or we may have difficulty procuring sufficient materials to meet sudden increases in customer demand. This could result in shipping delays or the loss of business to our competitors and harm to our relationships with our customers, which may result in penalties or other costs to us. Conversely, during periods of decreasing demand for our products, we must be able to appropriately align our cost structure with prevailing market conditions and effectively manage our supply chain. Our ability to timely and effectively reduce our costs in response to rapid downturns is limited by the fixed nature of many of our expenses in the near term, by our need to continue investing in product technology and support and service our products, and by our need to have sufficient production capacity and supply available to respond to sudden increases in demand. This could result in unavoidable short-term costs or excessive inventory levels, including increased risk of inventory obsolescence. If we are not able to timely and cost effectively adapt to changes in our business environment, our business, financial condition or results of operations may be materially and adversely affected.

Our reliance on critical suppliers for key components could lead to production and service interruptions and shortages.

We use a wide range of components from numerous suppliers in the manufacturing of our products, including custom electronic, laser, optical and mechanical components. We generally do not have guaranteed supply arrangements with our suppliers. We seek to reduce the risk of production and service interruptions and shortages of key parts by selecting and qualifying alternative suppliers for key parts, monitoring the financial stability of key suppliers and maintaining appropriate inventories of key parts. However, some key parts are available only from a single supplier or a limited group of suppliers in the short term. In addition, some of the lasers we use in our products are difficult to manufacture, and as a result we may not receive an adequate supply of lasers in a timely fashion to fill orders. Operations at our suppliers’ facilities are subject to disruption or discontinuation for a variety of reasons, including changes in business relationships, competition, financial difficulties, work stoppages, fire, natural disasters, customer prioritization, component end of life decisions or other causes. Any such disruption or discontinuation to our suppliers’ operations could interrupt or reduce our manufacturing activities and delay delivery of our products, any or all of which could materially and adversely affect our results of operations. This risk is particularly acute when we rely on a single or a limited group of suppliers. In addition, during periods of increased demand for our products, there is a heightened risk that one or more of our suppliers may not meet our increased demand requirements, adversely affecting our ability to fulfill orders and win business with our customers.

Table of Contents

Our product delivery schedules may cause us to incur significant expenses without offsetting revenues.

During our sales cycle, our customers generally evaluate, test and qualify our products before making a decision to purchase them. Before a potential customer purchases our products, we may incur significant expenses related to sales and marketing, product development and research and development prior to receiving a customer order that may be delayed or never get placed. We may incur these expenses without receiving revenues to offset such expenses soon thereafter or at all, which could materially and adversely affect our business, financial condition, or results of operations.

We may incur charges for excess or obsolete inventory as a result of having to forecast product demand without firm orders.

To effectively compete, we must deliver products on schedules required by our customers. Management forecasts demand, both in type and number of products, for us to timely meet customer delivery schedules. We use these forecasts to purchase inventory, some of which have exceptionally long lead times, in advance of our receiving firm customer orders. We also order materials based on our technology roadmap, which represents management’s assessment of technology we will utilize in new product development. Certain types of inventory, such as lasers and optical equipment, are particularly expensive and may only be used in the production of a single type of product. If actual demand is lower than forecast, we may have excessive working capital and slow-turning inventory. In addition, we may incur material charges for excess and obsolete inventory if we cannot sell the inventory. Also, if we alter our technology or product development strategy, we may have unusable inventory, which may also result in material accounting charges. For example, during fiscal 2018, we recorded approximately $13.6 million of charges in cost of sales, primarily due to inventory write-offs associated with discontinued products.

We may be unable to timely deliver certain products made by contract manufacturers.

We have arrangements with contract manufacturers to complete the manufacturing of certain of our product subcomponents. Any significant interruption in our contract manufacturers’ ability to provide quality manufacturing services to us as a result of contractual disputes with us or another party, labor disruptions, financial difficulties, natural disasters, delay or interruption in the receipt of inventory, or other causes could result in reduced manufacturing quality or delayed deliveries for certain of our products, any or all of which could materially and adversely affect our business. Additionally, should a contract manufacturer no longer be able to perform for any reason or we need to add a contract manufacturer, it may require substantial time and resources, including the potential of incurring substantial cost, to replace or add the associated manufacturing capabilities, which could materially and adversely affect our business.

Increasing regulations or environmental requirements on our product components could negatively affect our ability to sell our products or source materials.

Many countries, including the United States, China and those in the European Union, have implemented directives that restrict the sale of new electrical and electronic equipment containing certain hazardous substances and require disclosures if certain metals used in products are not from a conflict-free source. The directives could restrict our ability to sell our products in certain countries and affect sourcing at competitive prices and availability in sufficient quantities of certain minerals used in the manufacture of our products. In addition, our reputation could suffer if we are required to disclose that metals in our products are not from conflict-free sources.

Risks Related to Our Organization

Our significant international trade subjects us to greater risks.

For the first three quarters of fiscal 2019 and fiscal year 2018, international shipments accounted for 94% and 95% of total net shipments while shipments to Asia accounted for 87% and 90% of total net shipments. We expect that international shipments will continue to represent a significant percentage of net sales in the future. In addition, we obtain supplies through an international supply chain. Our non-U.S. sales and purchases are subject to risks inherent in international trade, many of which are outside our control and include the following:


•	periodic local or geographic economic downturns;


•	price and currency exchange controls;


•	fluctuation in the relative values of currencies;


•	difficulty in repatriating money, whether as a result of tax laws or otherwise;


•	difficulties protecting intellectual property;


•	shipping delays and disruptions, including as a result of border controls;


•	retaliatory trade practices, trade tensions, and changes in or inconsistency in application of trading policies, regulatory requirements, export control regulations, tariffs and other barriers, the termination or renegotiation of existing trade agreements; and

Table of Contents


•	difficulties in managing a global enterprise, including staffing, collecting accounts receivable, and managing suppliers, distributors and representatives.

Our success depends, in part, on hiring and retaining key personnel.

Our continued success depends in part upon the services of our key managerial, financial and technical personnel. The loss of key personnel, or our inability to attract, assimilate and retain qualified personnel, could result in the loss of customers, inhibit our ability to operate and grow our business and otherwise have a material adverse effect on our business and results of operations. We have previously had to, and may in the future have to, impose salary reductions on employees during economic downturns in an effort to maintain our financial position. On several occasions in recent years, executives and other employees have received limited or no annual bonuses due to our financial performance relative to the performance parameters in our annual bonus plans. These events may have an adverse effect on employee loyalty and may make it more difficult for us to attract and retain key personnel. Competition for qualified personnel in the industries and locations in which we compete for talent is intense, and we may not be successful in attracting and retaining qualified personnel. We may incur significant costs in our efforts to recruit and retain key personnel, which could affect our financial position and results of operations.

In the past we have had reorganizations and restructurings, which resulted in site closures and significant turnover of personnel, including key personnel. If similar events were to occur in the future, they may disrupt operating activities, may negatively affect employee morale and loyalty, and may make it more difficult to retain or rehire key personnel.

Our business and reputation could be negatively impacted by cyber-attacks and other security breaches.

We electronically store sensitive data, including intellectual property, our customers’, suppliers’ and business partners’ proprietary business information, and our employees’ personally identifiable information. The secure maintenance and transmission of this information is critical to our operations and business strategy. Despite our security measures, our information technology and infrastructure may be vulnerable to attacks by hackers or breached due to employee error, malfeasance or other actions. Further, the increasingly international, mobile-device, internet, and email-based environment in which we do business may subject us to new risks, such as email phishing attempts, or other activities designed to defraud us of funds or sensitive information, and may also provide multiple points of entry for cyber-attacks. Additionally, we rely on a number of third-party “cloud-based” providers of corporate infrastructure services relating to, among other things, human resources, electronic communication services and some financial functions, and we are therefore dependent on the security systems of these providers. Any breach or other unauthorized access to either our systems or our service-providers’ systems through viruses, loggers, malfeasant code in data or software, or other means could expose us to information loss or disclosure of confidential information and could compromise our networks such that the information stored there could be accessed, publicly disclosed, lost or stolen. Any such access, disclosure or loss of information could result in legal claims or proceedings, liability under laws that protect the privacy of personal information, disrupt our operations, damage our reputation, or hurt our competitive position, which could adversely affect our business, financial position and results of operations.

Our implementation of an updated enterprise resource planning software may result in unintended consequences that could negatively impact our business.

We are upgrading our enterprise resource planning software and related systems that support our operating and financial functions. We may experience difficulties in connection with such upgrades, including loss or corruption of data, compatibility issues, decreases in productivity as our personnel implement and become familiar with the upgrades, higher than expected upgrade costs and other integration challenges or delays. If encountered, a significant problem with the system upgrades could negatively impact our business by disrupting our operations. In addition, a significant problem with the system upgrades, integration with other systems or ongoing management of our enterprise resource planning software and related systems could have an adverse effect on our ability to generate and interpret accurate management and financial reports and other information on a timely basis, which could adversely affect our business, financial position and results from operations.

Our success could be negatively impacted if we fail to effectively control, oversee and direct foreign subsidiaries, and our global footprint may result in a substantial amount of management effort, cost and uncertainty.

We are a global company operating in multiple jurisdictions. We have significant foreign operations and subsidiaries, including manufacturing facilities in Singapore and China, research and application development facilities in France, China and Korea, and sales and service offices in various countries to enhance responsiveness and access to customers local to these regions. In fiscal 2018, certain additional customer-facing operational resources were moved to countries in Asia, and changes were implemented to our supply chain in regions outside the United States. Our global presence and any changes thereto may subject us to a variety of complexities and risks, many of which may divert a substantial amount of management’s time. These risks include:

Table of Contents


•	exposure to local labor disputes, potential corruption, and noncompliance with labor laws and other laws governing employees;


•	unpredictable costs, redundancy costs and cost overruns for developing facilities and acquiring equipment;


•	challenges in building local management teams, technical personnel and other staff for functions that we have not previously conducted outside of the United States;


•	technical obstacles such as poor production or process yield and loss of quality control during the ramp of a new facility;


•	re-qualifications and other procedures that our customers may require;


•	our ability to bring up local suppliers to meet our quality and cycle-time needs;


•	rapidly changing business conditions that may require us to change or abandon plans before we fully implement them;


•	complexity of managing our financial reporting and internal controls and procedures; and


•	the ability to understand and comply with many different laws, infrastructures, ways of doing business, and surmount other challenges posed by distance and differences in language and culture.

If we are unable to manage these risks effectively, it could negatively affect our operating performance and our reputation. These and other factors could delay the continuing development, expansion and implementation of our strategy, as well as decrease our gross margins, delay shipments and deliveries, cause us to lose sales, require us to write off investments already made, damage our reputation and harm our business, financial condition and results of operations.

Our global operations expose us to a greater variety of natural disasters and political and social strife, each of which could directly impact our properties, operations and personnel.

Our business and operating results could be impacted, directly or indirectly, by natural disasters, outbreaks of infectious disease, military action, international conflicts, terrorist activities, civil unrest and associated political instability and policy changes. Many of our facilities, including our Portland, Oregon headquarters, are in areas with known earthquake risk. Some of these events or circumstances may also result in heightened security concerns with respect to domestic and international travel and commerce, including more frequent instances of shipping delays, which may further affect our business and operating results. In particular, recent and potential future tightening of immigration and travel controls may adversely affect the residence status of non-U.S. engineers and other key technical employees in our U.S. facilities, our ability to attract, hire and retain new non-U.S. employees in such facilities or our ability to bring our non-U.S. employees into the United States for business related activities.

Our acquisition activities could result in operational disruptions, integration difficulties and other complications.

We may acquire or make significant investments in other businesses with complementary products, services or technologies, which acquisitions and investments may fail to meet our expectations. Our January 2015 acquisition of Wuhan Topwin Optoelectronics Technology Co., Ltd. (Topwin) resulted in an impairment of goodwill and intangibles in fiscal 2017 associated with that reporting unit. After our August 2016 acquisition of Visicon Technologies, Inc. (Visicon), we closed Visicon's Napa, California facility in fiscal 2017. Acquisitions involve numerous risks, many of which are unpredictable and beyond our control, including:


•	increased costs in connection with integration of personnel, operations, technologies and products of the acquired businesses;


•	difficulties in implementation of our enterprise resource planning system into the acquired company’s operations;


•	diversion of management’s attention from other operational matters;


•	the potential loss of key employees of the acquired company;


•	lack of synergy or inability to realize expected synergies resulting from the acquisition;


•	the inability to successfully enter new markets expected to result from the acquisition;


•	acquired assets becoming impaired as a result of technological advancements or worse-than-expected performance by the acquired company;


•	establishing satisfactory internal controls and accounting practices at the acquired company;


•	difficulties implementing internal manufacturing processes at the acquired company;


•	achieving our anticipated financial and operational performance for the acquired company or the performance of the combined company following the transaction;


•	acquiring unanticipated liabilities; and


•	potential litigations arising out of breach of contract terms.

Table of Contents

The means by which we finance an acquisition may also significantly affect our business or the value of our common stock. If we issue common stock to pay for an acquisition, the ownership percentage of our existing shareholders will be diluted and the value of the shares held by our existing shareholders could decrease. If we use cash on hand to pay for an acquisition, the payment could significantly reduce the cash that would be available to fund our operations or to use for other purposes. If we borrow funds in connection with an acquisition, we would be required to use cash to service the debt and to comply with financial and other covenants, which may reduce our flexibility.

Risks Related to Technology

We may be unable to realize growth opportunities if we cannot strengthen our marketing and channel capabilities.

The laser microfabrication industry is comprised of broad sets of markets and applications and presents significant opportunities for growth. In order to access these growth opportunities, we are strengthening our approach from customer-centric to market-based. We have reorganized into a functional structure and expanded our marketing team to drive improved process and disciplines across the organization. We believe our ability to successfully access and compete in these broader markets partially depends on our successful development of new marketing capabilities, sales and distribution channel access and customer relationships. Our inability to do so would limit our growth opportunities and profitability. In addition, any new strategy may cause disruption and ultimately prove unsuccessful.

We may be unable to keep up with rapid technological changes in our markets, which could result in customers purchasing fewer of our products.

The markets for our products are characterized by rapid technological change and innovation, frequent new product introductions, changes in customer requirements and evolving industry standards. Our future performance will depend on the successful development, introduction and market acceptance of new and enhanced products that address technological changes and the requirements of current and potential customers. The development of new, technologically advanced products is a complex and uncertain process, requiring high levels of innovation and highly skilled engineering and development personnel, as well as the accurate anticipation of technological and market trends. We may not be able to identify, develop, manufacture, market or support new or enhanced products on a timely basis, if at all. If our competitors introduce new or enhanced products, or alternative technologies, our customers may defer, change or cancel orders for our existing products or cease purchasing our products altogether. Further, our new products may not gain timely market acceptance, and we may not be able to respond effectively to product announcements by competitors, technology changes or emerging industry standards. If we are unable to develop new or enhanced products to address customer requirements, technology changes or new industry standards on a timely basis, if our new or enhanced products are not accepted by the market, or if our customers adopt alternative technologies, our business, financial condition and results of operations may be adversely affected due to loss of market share or due to concentrations in impacted areas.

Our industry requires continued investment in research and development, and we may fail to optimally allocate our resources in this area.

The intense competition in our industry requires us to continue to invest in research and development. If we fail to invest sufficiently in research and development, our products could become obsolete or less attractive to our current and potential customers. Because of our need to maintain our research and development spending levels, our operating margins could be materially decreased if our net sales decline. In addition, our emphasis on research and development and technological innovation could cause our operating costs to increase in the future, and research and development expenses to increase as a percentage of total operating expenses and as a percentage of net sales. Conversely, if we have competing needs for our financial resources, we could spend less on research and development than we believe would be optimal for long-term competitiveness.

Because our products are highly complex, we may experience quality control issues that could result in decreased sales and harm our reputation.

Our products are highly complex, and our extensive product development, manufacturing and testing processes may not be adequate to detect all defects, errors, failures and quality issues that could impact customer satisfaction or result in claims against us. Our strategy to leverage proprietary laser technology to create competitive advantage may increase the probability and impact of these risks. As a result, we may have to replace certain components or provide remediation in response to the discovery of defects in products after they are shipped. The occurrence of any defects, errors, failures or quality issues could result in cancellation of orders, product returns, diversion of our resources, legal actions by our customers and other losses to us or to our customers. These occurrences could also result in the loss of, or delay in, market acceptance of our products, loss of sales and increased expenses and warranty costs.

Table of Contents

Risks Related to Legal Matters

Our business depends on proprietary rights that may be difficult to protect, and the loss of any proprietary rights could affect our ability to compete effectively.

Our success depends significantly upon the protection of our proprietary rights. We attempt to protect our proprietary rights through patents, copyrights, trademarks, maintenance of trade secrets and other measures, including entering into confidentiality agreements. Although we incur substantial costs to obtain and maintain patents and to defend our intellectual property rights, we may be unsuccessful in protecting these rights. Additionally, our proprietary rights may not provide the competitive advantages we expect, or other parties may challenge, invalidate or circumvent these rights.

We rely upon the laws of the United States and foreign countries where we develop, manufacture or sell our products to protect our proprietary rights. However, our efforts to protect our intellectual property may be less effective in some foreign countries where intellectual property rights are not as well protected as in the United States. For example, the patent prosecution and enforcement system within China is less mature than the systems in other jurisdictions and therefore we may be limited in our ability to enforce our rights. This disadvantage would likely be compounded by the challenge of any enforcement attempts by us as a foreign entity seeking protection against a Chinese company infringing on our proprietary rights in China. If we fail to adequately protect our intellectual property abroad, it could be easier for our competitors to sell competing products in foreign countries, which could result in reduced sales and gross margins.

Our products may subject us to intellectual property infringement claims that could increase our costs and restrict our ability to do business.

Several of our competitors hold patents covering a variety of technologies, applications and methods of use similar to some of those used in our products. Competitors or others have asserted in the past, and may assert in the future, infringement claims against our customers or us with respect to current or future products or uses. These assertions may result in costly litigation, and if claims of infringement are asserted against our customers, those customers may seek indemnification from us for damages or expenses they incur.

If we become subject to infringement claims, we will evaluate our position and consider the available alternatives, which may include seeking licenses to use the technology in question. These licenses, however, may not be available on satisfactory terms or at all. If we are not able to negotiate the necessary licenses on commercially reasonable terms, or successfully defend our position, our financial condition and results of operations could be materially and adversely affected.

As a global company, we are subject to adverse fluctuations in our effective taxes due to tax audits, changes in tax law, certain preferential tax concessions, and other regulatory requirements.

Our tax liabilities may fluctuate from one period to the next because we operate in numerous tax jurisdictions with a broad range of income tax rates and regulations. Further, we are also periodically under audit by U.S. and foreign tax authorities and may have exposure to additional tax liabilities as a result. Although we believe our tax estimates are reasonable, the final outcome of tax audits and the impact of changes in tax laws or the interpretation of tax laws could result in a material effect on our financial results, tax positions or cash flows in the period or periods in which the determination is made.

We benefit from a tax incentive program in Singapore pursuant to which we paid no Singapore income tax with respect to our Singapore manufacturing operations. The incentive period ends June 30, 2021 and is conditioned on achieving certain business and investment levels. If we do not achieve these criteria, we may lose the incentive benefits.

The Tax Cuts and Jobs Act (Tax Act) was enacted into law in the United States on December 22, 2017. We have elected the Staff Accounting Bulletin No. 118 (SAB 118) measurement period and will continue to evaluate the impact the new legislation will have on our consolidated financial condition, results of operations, and cash flows. While not limited to the following, we believe the following risks exist:


•	Rule-making and additional technical guidance from the Department of Treasury, the FASB, and other relevant rule-making bodies continues to evolve and is likely to impact the treatment of the impact of the Tax Act.


•	Our assessment remains ongoing; therefore, the final impact of the Tax Act may differ due to changes in interpretations, assumptions and we are not able to fully quantify the impact on our condensed consolidated financial statements at this time.


•	Reaction to the new regulations by states and international trading partners is not yet clear, and could have a material impact on our business and results from operations.

The change in statutory tax rates in the United States also impacts the gross values of the deferred tax assets and valuation allowance. The release of the valuation allowance and the future utilization of deferred tax assets are recognized at the new, lower rate.

Table of Contents

The Company has evaluated the new legislation and the additional technical guidance from the Department of Treasury, the FASB, and other relevant rule-making bodies issued to date and updated our financial position, results of operations, and cash flows based upon the available information. As a result of evaluating the new rules and regulations relating Internal Revenue Code (IRC) §965 regarding the deemed repatriation of foreign earnings and how it impacts the Company, the Company made the basis election under Prop. Reg. Section 1.965-2(f)(2), allowing the Company to make certain basis adjustments with respect to the stock of each deferred foreign income corporation and each earnings and profits deficit foreign corporation. The change resulted in the recognition of capital gain for which there was sufficient excess capital loss carried forward to fully offset the gain. Furthermore, the valuation allowance recorded against the excess capital loss carry carry-forward was reversed. As a result the financial arising from the change was minimal.

Risks Related to Financial Matters

If we cannot meet our liquidity needs, we may not have sufficient working capital to continue our business operations.

We may require greater working capital to operate than similar size businesses in many other industries. At December 29, 2018, we had working capital of $259.6 million, including $175.2 million in cash, cash equivalents and short-term investments. Our operating cash flows were negative for the third quarter of fiscal 2019 and for most quarters between September 2013 and March 2017. If cash levels were to decline below our working capital requirements due to investment in inventories as a result of production, less favorable collections, or less favorable payment terms, or a combination of these circumstances, among others, we may need additional cash to sustain operations. In addition, many of our contracts to acquire inventory represent purchase commitments. As a result, if we experience lower than anticipated demand for our products we may not avoid the cost of purchasing the associated inventory.

While we have a credit facility in place, if we fail to meet the covenants in our credit facility or our lenders fail to fund, access to the facility may be limited or the facility may become unavailable altogether. Losses, such as those experienced in the second and third quarters of fiscal 2017, negatively impact our ability to maintain compliance with these covenants.

If we have a material decrease in available cash, or require additional cash for operations, and we do not have available credit or other funds and are unable to obtain financing on acceptable terms, or at all, our business and our ability to fully fund operations could be materially and adversely affected.

Termination of our Loan Agreement and Credit Facility may limit our ability to meet the immediate needs of the business until the Merger is completed.

As of the end of the third quarter of fiscal 2019, we had $12.9 million of long-term indebtedness in the form of secured mortgage. This indebtedness was secured by our headquarters in Portland, Oregon. We also had access to a credit facility under which we could borrow up to a maximum of $30 million, subject to meeting certain availability requirements. Nothing was outstanding under this facility and the full amount was available under the facility as of December 29, 2018. Subsequent to the end of the third quarter of fiscal 2019 and in preparation for the Merger, the Company paid off the Loan Agreement and terminated the Credit Facility; see Note 20: Subsequent Events. If the Merger were to be delayed for an extended period of time or was not completed, the lack of available credit and use of cash to pay down the loan could limit our ability to adequately respond to market or business downturns or opportunities.

Unfavorable currency exchange rate fluctuations could reduce our net sales abroad or cause us to incur losses on our forward exchange contracts.

Unfavorable currency fluctuations could require us to increase prices to foreign customers, which could result in lower net sales by us to those customers. Alternatively, if we do not adjust the prices for our products in response to unfavorable currency fluctuations, we could be forced to sell our products at a lower margin or at a net loss. A weak dollar may lead to impairment of inventories if costs begin to exceed selling prices as translated to the functional currency. In addition, some of our foreign sales are denominated in the currency of the country in which these products are sold and that currency could be less valuable at the time of receipt as a result of exchange rate fluctuations. From time to time, we enter into forward exchange contracts to hedge the value of accounts receivable primarily denominated in euros and other currencies. However, our efforts may not be adequate to protect us against significant currency fluctuations and such efforts may expose us to additional exchange rate risks, which could adversely affect our results of operations.

Table of Contents

An impairment of our investments could reduce our available liquidity.

Our investment portfolio is primarily comprised of commercial paper, corporate bonds, debt securities issued by U.S. governmental agencies and money market securities. These investments are intended to be highly liquid and low risk. If the markets for these securities deteriorated for any reason, including as a result of a downgrade in the credit rating of U.S. government securities, the liquidity and value of these investments could be negatively affected, which could result in impairment charges and a material impact to our financial condition and results of operations. In addition, if our investments become illiquid or materially decrease in value, we may not have access to sufficient cash to meet or working capital and liquidity needs.

An impairment of goodwill, intangible and long-lived assets could negatively impact our consolidated earnings.

We held a total of $4.1 million in acquired intangible assets, net of accumulated amortization, and $2.6 million in goodwill at December 29, 2018. As with the impairment recognized in the fourth quarter of fiscal 2017, events may occur or circumstances change such that the carrying value is not recoverable or it becomes more likely than not that the fair value of long-lived assets is reduced below the carrying value of the reporting unit, which could result in a further write-down of the fair-value of our assets. For example, the performance of our Topwin reporting unit did not meet expectations and, as a result, an impairment of goodwill and intangibles associated with that reporting unit was triggered in fiscal 2017, impacting consolidated earnings.

In addition, certain of our long-lived assets such as leasehold improvements, machinery, equipment, and loan and demo assets may experience impairment as a result of events such as the closure of sites, introduction of new products, decisions to exit certain products or markets, and changes in technology. We depreciate long-lived assets and amortize intangible assets at levels we believe are adequate; however, an impairment of these assets could have a material adverse impact on our business, financial condition and results of operations. For example, due to the fiscal 2017 restructuring plan, $3.0 million of non-current assets were impaired since the beginning of the plan through fiscal 2018 and included in operating expenses.

If we fail to maintain an effective system of internal controls, we may not be able to accurately report our financial results or prevent fraud and our stock price and our business may be adversely affected.

Effective internal controls are necessary for us to provide reliable financial reports and effectively prevent fraud. If we cannot provide reliable financial reports or prevent fraud, our operating results could be harmed.

Although we are committed to continue to improve our internal control processes and to diligently and vigorously review our internal control over financial reporting in order to ensure compliance with the requirements of Section 404 of the Sarbanes-Oxley Act of 2002, any control system, regardless of how well designed, operated and evaluated, can provide only reasonable, not absolute, assurance that its objectives will be met. Therefore, we cannot be certain that in the future any material weaknesses or significant deficiencies will be avoided. If such weaknesses or deficiencies occur, they could result in misstatements of our results of operations, restatements of our Consolidated Financial Statements, a decline in our stock price and investor confidence, or other material negative effects on our business, reputation, financial condition or liquidity.

Our implementation of the new revenue recognition requirements may not be fully complete and accurate, which could adversely affect our reported financial results.

Although we have spent considerable time preparing to implement and implementing the new Accounting Standards Update (ASU) 2014-09, Revenue from Contracts with Customers: Topic 606 (ASU 2014-09), we do not have extensive experience with the new requirements in practice. The SEC requires us to publish our financial results in short time frames, which could result in our having difficulty implementing the new requirements completely and accurately as intended within the prescribed financial reporting periods. Untimely or inaccurate implementation of ASU 2014-09 could adversely affect our reported financial results. See Note 1: Basis of Presentation and Note 2: Recent Accounting Pronouncements for further information regarding implementation and the changes to our policies and financials due to implementation of ASU 2014-09.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

Not Applicable.

Item 4. Mine Safety Disclosures

Not Applicable.

Table of Contents

Item 5. Other Information

Beginning with the first quarter of fiscal 2019, the Company now breaks out Net sales of Service, interrelated with all four major end markets as a separate line item to provide better insights into revenue streams. As such, the below tables provide comparative presentation for the prior year reported numbers.

The Company and its consolidated subsidiaries operate in a single segment, and this single segment sells products into a variety of end markets that are grouped into four major categories for the purpose of providing an understanding of the principal end markets for the products manufactured by the Company, specifically: (1) Printed Circuit Board (PCB), (2) Component Test, (3) Semiconductor, and (4) Industrial Machining. Service sales are interrelated with all major end markets of the Company and are separately presented.



	Fiscal quarter ended
	Jul 1, 2017							Sep 30, 2017
(In thousands)	As reported		Adjustment			As Reclassified		As reported		Adjustment			As Reclassified
Printed Circuit Board	$	52,318	$	(6,133	)	$	46,185	$	43,541	$	(5,354	)	$	38,187
Component Test	8,181		(733		)	7,448		7,677		(670		)	7,007
Semiconductor	6,737		(1,556		)	5,181		12,028		(2,387		)	9,641
Industrial Machining	5,448		(2,169		)	3,279		7,721		(2,240		)	5,481
Service	—		10,591			10,591		—		10,651			10,651
Net sales	$	72,684	$	—		$	72,684	$	70,967	$	—		$	70,967



	Fiscal quarter ended
	Dec 30, 2017							Mar 31, 2018
(In thousands)	As reported		Adjustment			As Reclassified		As reported		Adjustment			As Reclassified
Printed Circuit Board	$	83,799	$	(6,866	)	$	76,933	$	76,772	$	(5,876	)	$	70,896
Component Test	7,473		(969		)	6,504		9,459		(1,058		)	8,401
Semiconductor	12,351		(1,687		)	10,664		24,055		(1,693		)	22,362
Industrial Machining	7,217		(1,900		)	5,317		3,107		(1,244		)	1,863
Service	—		11,422			11,422		—		9,871			9,871
Net Sales	$	110,840	$	—		$	110,840	$	113,393	$	—		$	113,393

Table of Contents

Item 6. Exhibits

This list is intended to constitute the exhibit index.



3.1		Third Restated Articles of Incorporation, as amended. Incorporated by reference to Exhibit 3.1 of the Company's Annual Report on Form 10-K, filed on June 15, 2010.
3.2		2009 Amended and Restated Bylaws, as amended. Incorporated by reference to Exhibit 3.1 of the Company’s Current Report on Form 8-K filed on March 26, 2015.
3.3		Amendment to 2009 Amended and Restated Bylaws. Incorporated by reference to Exhibit 3.1 of the Company’s Current Report on Form 8-K filed on October 30, 2018.
99.1		Form of Shareholder Agreement, dated October 29, 2018. Incorporated by reference to Exhibit 99.1 of the Company’s Current Report on Form 8-K filed on October 30, 2018.
31.1		Certification of the Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2		Certification of the Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1		Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
32.2		Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
101.INS		XBRL Instance Document *
101.SCH		XBRL Taxonomy Extension Schema Document *
101.CAL		XBRL Taxonomy Extension Calculation Linkbase Document *
101.DEF		XBRL Taxonomy Extension Definition Linkbase Document *
101.LAB		XBRL Taxonomy Extension Label Linkbase Document *
101.PRE		XBRL Taxonomy Extension Presentation Linkbase Document *

* Pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933 or Section 18 of the Securities and Exchange Act of 1934, and otherwise are not subject to liability under those sections.

Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.



Date:	January 30, 2019	ELECTRO SCIENTIFIC INDUSTRIES, INC.
		By:	/s/ Michael D. Burger
			Michael D. Burger
			President and Chief Executive Officer
			(Principal Executive Officer)

		By:	/s/ Allen Muhich
			Allen Muhich
			Vice President, Chief Financial Officer and Corporate Secretary
			(Principal Financial Officer)

ELECTRO SCIENTIFIC INDUSTRIES INC 10-Q