UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

X . ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended: December 31, 2012

. TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ____________ to _____________

Commission File Number: 000-52860

[f10k123112_10k001.jpg]

Shrink Nanotechnologies, Inc.

(Exact name of registrant as specified in its charter)

Delaware

20-2197964

(State or other jurisdiction of

incorporation or organization)

(I.R.S. Employer

Identification No.)

7020 Belcrest Drive

Plano, Texas 75024

(972) 342-0982

(Registrant’s telephone number, including area code)

(Address of principal executive offices)

Securities registered pursuant to Section 12(b) of the Act: None

Securities registered pursuant to Section 12(g) of the Exchange Act: Common Stock, par value $0.001 per share

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes . No X .

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes . No X .

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the issuer was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes X . No .

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes . No X .

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. X .

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company filer. See definition of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.


Large accelerated filer	.	Accelerated filer	.
Non-accelerated filer	. (Do not check if a smaller reporting company)	Smaller reporting company	X .

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes . No X .

On June 30, 2012, the last business day of the registrant’s most recently completed second quarter, the aggregate market value of the Common Stock held by non-affiliates of the registrant was $___, based upon the closing price on that date of the Common Stock of the registrant on the OTC Bulletin Board system of $0.__. For purposes of this response, the registrant has assumed that its directors, executive officers and beneficial owners of 5% or more of its Common Stock are deemed affiliates of the registrant.

As of as of March 26, 2013 the registrant had 224,746,249 shares of its Common Stock, $0.001 par value, outstanding.

[f10k123112_10k002.jpg]

SHRINK NANOTECHNOLOGIES, INC.

Annual Report on FORM 10-K

For the Fiscal Year Ended December 31, 2012

TABLE OF CONTENTS


		Page

PART I		3
ITEM 1.	BUSINESS	3
	Forward Looking Statements	3
	Use of Terms	4
	Business Overview	4
	Intellectual Property We Own	4
ITEM 1A.	RISK FACTORS	21
ITEM 1B.	UNRESOLVED STAFF COMMENTS	32
ITEM 2.	PROPERTIES	32
ITEM 3.	LEGAL PROCEEDINGS	32
ITEM 4.	MINE SAFETY DISCLOSURES	32
PART II		32
ITEM 5.	MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES	32
	Securities Authorized for Issuance Under Equity Compensation Plans	33
ITEM 6.	SELECTED FINANCIAL DATA	34
ITEM 7.	MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS	34
ITEM 7A.	QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK	49
ITEM 8.	FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA	F-1
ITEM 9.	CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE	50
ITEM 9A.	CONTROLS AND PROCEDURES	50
ITEM 9B.	OTHER INFORMATION	51
PART III		52
ITEM 10.	DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE	52
ITEM 11.	EXECUTIVE COMPENSATION	53
ITEM 12.	SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS	55
ITEM 13.	CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE	56
ITEM 14.	PRINCIPAL ACCOUNTING FEES AND SERVICES	57
PART IV		58
ITEM 15.	EXHIBITS, FINANCIAL STATEMENT SCHEDULES	58
EXHIBITS		58
SIGNATURES		61

PART I

ITEM 1. BUSINESS

FORWARD LOOKING STATEMENTS

Certain information contained in this Annual Report on Form 10-K (this “Report” or “Annual Report”) includes forward-looking statements within the meaning of the Securities Act, and Section 21E of the Securities Exchange Act of 1934, as amended, (thee “Exchange Act”). These statements are expressed in good faith and based upon information currently available to the Company and management and their interpretation of what are believed to be significant factors affecting the businesses, including many assumptions regarding future events. These forward looking statements can be identified by the use of terms and phrases such as “believe,” “plan,” “intend,” “anticipate,” “target,” “estimate,” “expect,” and the like, and/or future-tense or conditional constructions (“will,” “may,” “could, ” “ should, ” etc.).

Forward-looking statements include statements regarding, without limitation:

the development, commercialization and market acceptance of our “structured” cell culturing devices (StemDisc™) and related software, our microfluidic technology licensed in part from Corning Incorporated and, our shrinkable film based products such as CellAllign™, NanoShrink™ and Metal-enhanced fluorescence substrates, and the costs related to bringing these technologies and products to market,

our immediate and growing need to raise the capital needed or obtain government grants to commercialize our products and implement our business plan,

our ability to access cash to fund our ongoing operations,

our ability to transition from an R&D company to a company with commercialized products,

our ability to innovate using our existing platform technology, a shrinkable plastic film material branded as “NanoShrink™” and to find new market accepted uses for the same,

our ability to secure and continue to access economical component and manufacturing sourcing for the various businesses we seek to engage in,

our ability to continue funding research and development relationships we have and/or may enter into,

our ability to secure certain critical licenses from third parties, some of which may be potential commercial competitors for one or more of our products,

our ability to find attractive acquisition candidates in the life sciences business,

the progress of our research and development activities,

our ability to further acquire, and hold and defend our intellectual property,

the projected growth in stem cell research and public policy changes relating to government funding of the same, and

the presumed size and growth of the market for lab-on-a-chip devices in life sciences.

These forward looking statements should be considered in addition to our risk factors (contained in this Annual Report under the heading “Risk Factors”). Additional risks not described above, or unknown to us, may also adversely affect the Company or its results. Our actual results could differ materially from those anticipated in these forward-looking statements as a result of various factors, including those set forth in the Risk Factors section in this Annual Report.

Readers are urged not to place undue reliance on these forward-looking statements, which speak only as of the date of this Annual Report. We assume no obligation to update any forward-looking statements. Readers are urged to carefully review and consider the various disclosures made by us in our reports filed with the SEC (which shall also include by reference herein and incorporate the same as if fully included in their entirety, all Form 10-Ks, Form 10-Qs, Form 8-Ks and other periodic reports filed by us in the SEC’s EDGAR filing system (www.sec.gov) as may be amended from time to time, which attempt to update interested parties of the risks and factors and other disclosures that may affect our business, financial condition, results of operation and cash flows.

Use of Terms

Except as otherwise indicated by the context, references in this report to (i) the “Shrink Parent” or “Parent” or similar terms refer to the publicly traded parent holding company and registrant, Shrink Nanotechnologies, Inc., a Delaware corporation, and “Shrink” refers to our wholly owned subsidiaries, both (a) Shrink Technologies, Inc., a California corporation and (b) Shrink Technologies B, Inc., a California corporation (ii) “Shrink Chips,” “Shrink Solar” and “Blackbox” refer to our Delaware subsidiaries ShrinkChips LLC, Shrink Solar LLC and Blackbox Semiconductor, Inc., (iii) the “Company,” “we,” “us,” or “our,” refer to the combined business of Shrink Parent, together with its wholly owned subsidiaries, Shrink, ShrinkChips, Shrink Solar and Blackbox, unless the context requires otherwise, (iv) “Forward Split” refers to the 5 for 1 forward split of the Parent’s stock effective as of April 8, 2010, (v) “SEC” are to the United States Securities and Exchange Commission, (vi) “Securities Act” are to Securities Act of 1933, as amended, and (vii) “Exchange Act” are to the Securities Exchange Act of 1934, as amended.

All references to share amounts, exercise, sale or conversion prices in this Annual Report are as adjusted to reflect post-Forward Split amounts and prices.

Business Overview

General

We are, with our subsidiaries, dedicated to commercializing biotechnology and other high technology intellectual property, know-how and related products, from universities and medium to large commercial businesses, that may be deployed as commercial products or licensing opportunities in the near (immediate to 2 years) and mid-term (2-4 years). We have also recently undertaken a program to seek to acquire small companies (or business segments of larger companies) with developed and ready-to-go-to-market products, strong intellectual property portfolios, management and operational infrastructure. Historically, we have primarily focused our resources in the life sciences market; however, we also have successfully acquired technologies in, for example, the semiconductor space. With all technologies we acquire and allocate our limited resources to, our objective is to develop products and intellectual property resources in order to generate cash flow, and ultimately, value for our shareholders.

The Company has undergone, and continues to undergo, marked and sometimes volatile operational changes as we attempt to transition towards commercialization efforts and liquidate undesired assets. Our business currently consists of four units: Cell Culturing Products; Microfluidic Systems and Kits; Special Substrates; and Internal Development and Acquisitions.

Our Cell Culturing Unit is dedicated to the commercialization of our stem cell culture platform known as StemDisc® and its related software, as well as NanoShrink® based tissue engineering substrates known for our Cell Align®. Our Microfluidic Systems and Kits business is seeking to market a unique and patented modular microfluidic system we exclusively licensed from Corning Incorporated, as well as a version of NanoShrink® (metal enhanced fluorescence) that will enable the low cost development of two dimensional microfluidic system prototypes. Our Special Substrates business is developing specialized versions of NanoShrink® substrates that have unique surface plasmon resonance capabilities and which may be integrated into existing market leading devices and systems. Our Internal Development and Acquisitions Unit is actively developing technologies that are a part of a development and commercialization program, as well as engaging in due diligence on technologies and businesses we are in the process of evaluating for acquisition purposes.

The use of the word “unit” is not meant to imply that Shrink has four separate fully functioning organizations of personnel and facilities. Rather the opposite is true. The Company has extremely limited personnel resources (aside from its access to academic research facilities) and the personnel the Company does employ regularly serve the Company across all of the Company’s business “units.”

Business Focus

The Company intends to direct its focus, and expects to continue to allocate a material portion of its meager resources, towards (1) the commercialization and development of technologies in its four business units as discussed in greater depth in this Report, and (2) making acquisitions of high technology companies and other accretive technology assets that either supplement or otherwise enhance the Company’s core abilities and interests.

Assets; Intellectual Property and Research Agreements

Our assets include exclusive and non-exclusive patent rights, as more fully described in this Report and in our Annual Report, from agreements with third parties, as follows:

Our exclusive License Agreement with Corning, Inc. (the “Corning License Agreement”) wherein the Company licensed the exclusive worldwide right to use and sublicense Corning’s patent-pending Modular Microfluidic System and Method for Building Modular Microfluidic System.

Our two Sponsored Research Agreements with the University of California Regents on behalf of University of California, Irvine campus entered into in May 2010 (the “Biosensing Research Agreement”), and in September 2010 (the “EB Research Agreement”), and rights to acquire additional license rights funded by us under these agreements, (the “Sponsored Research Agreements”).

Our assets also included, through June 3, 2011, the exclusive License Agreement (the “Chicago License Agreement”) between our previously wholly-owned subsidiary BlackBox and the University of Chicago (“Chicago”), wherein BlackBox licensed the exclusive, worldwide right to use and sublicense Chicago’s patent-pending Materials and Methods for the Preparation of Nanocomposites (a/k/a “electronic glue” chemistry) for fields of use other than thermoelectric applications. We have completed the sale of our BlackBox subsidiary along with this license to BlackBox Semiconductors, Inc., a Nevada corporation (“BlackBox Parent”).

We also have entered into other agreements, such as our agreement with the MF3 Consortium, accessing matching funds from MF3’s relationship with DARPA. This agreement could provide us with research co-funding agreements as more fully provided below; however, it necessarily requires that the Company have investable cash to put into a research program in order to access “matching” funds. Because of the limited cash we have had, making such investments has been extremely limited. Finally, we intend to attempt to commercialize our assets through relationships with third party manufacturers we contract with. No assurance can be made that the Company will have funds sufficient to further develop and license new technologies or to commercialize the ones we have.

We may, from time-to-time and as a result of rights granted in one or more of our (or our subsidiary’s) licensing agreements, take a license to inventions (and the related license to domestic and international patent application rights) which result from a sponsored research arrangement or private (non-academic sector) license agreement. Doing so may give Shrink the license rights, but will also trigger the payment of certain fees and various ongoing financial commitments, all of which have been negotiated and are disclosed in the license agreement as provided elsewhere in this Report.

The Company regularly reviews its licenses and patents and, as technologies or inventions have been further commercially vetted or newer competing technologies are developed by others, management may determine using its reasonable business judgment, to not continue to support the development of a technology, and may therefore abandon its licensing rights and or intellectual property rights (if not otherwise licensed) with respect to that technology, invention and the related license. The Company may, from time to time, abandon intellectual property rights which it formerly thought would be valuable or which may still have some value but would be too expensive to maintain.

Abandonment or an outright termination of a license to a particular invention may occur more often as Shrink acquires more IP rights, and the same inventions are commercially vetted. License or patent rights may also be abandoned based on no other reason other than limited capital or the Company’s need to expend its capital on other vital needs. To the extent the Company abandons such non-critical IP rights, the Company may not file a specific abandonment notice.

During late 2010, we terminated our research agreement with the UC Merced and the related license agreement with the UC Regents, as management felt that, given our limited funds, the costs of these agreements were cost prohibitive and were yielding unsuccessful results while viable alternative technologies were found elsewhere. As a result, we lost any patent license rights associated with these agreements.

The Company has dissolved its Shrink Solar, LLC entity which had no revenues or assets.

In March 2011, we entered into an agreement in principle to transfer our BlackBox Semiconductor, Inc. subsidiary (the “BlackBox Subsidiary”) to a separate public company as the BlackBox business will require different management and commercial resources and relationships, as well as significant amounts of capital and time to commercialize products.

On June 3, 2011, we finalized the agreement with BlackBox Semiconductor, Inc., f/k/a Visitrade, Inc., a Nevada corporation, a publicly traded company, (the “BlackBox Parent”), as purchaser, for the exchange of all of the shares of BlackBox Subsidiary from the Company (the “Share Exchange”).

The material terms of the Share Exchange were:

The primary asset of the BlackBox Subsidiary includes an exclusive License Agreement (the “Chicago License Agreement”) with the University of Chicago, granting to BlackBox Subsidiary the exclusive, worldwide right to use and sublicense Chicago’s patent-pending Materials and Methods for the Preparation of Nanocomposites (US PTO Application No. PCT/US10/32246, and provisional applications 61/214,434 and 61,264,790) and future patent applications filed by the University of Chicago based on certain other patentable technologies described in the Chicago License Agreement.

Discussion of Business Strategy; Short-Term Goals

Although management constantly monitors market trends, as well as available capital and has in the past, and continues to, refine and re-prioritize the Company’s goals, so as to attain commercialization as quickly as possible, the goals we will need to attain for our various businesses are currently: (1) commercialization of existing and newer commercial versions of StemDisc®, Cell Align® and NanoShrink® products; (2) entering into a joint development agreement to commercialize the Corning microfluidic system; (3) joint development of certain materials from our Special Substrates business unit; and (4) entering into technologically accretive and synergistic acquisitions.

We acquired our assets and rights by using a business model that has inexpensively allowed us to license technologies from two primary sources: (1) university laboratories, and (2) “secondary” technologies from very large industrial businesses. Traditionally and historically, university engineering labs have been used as commercial resources for venture capital organizations and other funding sources looking for high quality low cost technology.

We have also recently undertaken a program to develop commercial relationships with larger, multi-national United States-based industrial companies in order to potentially work with their technologies and products which have been abandoned or “orphaned” for one or a number of reasons – primarily due to a limited market opportunity or limited funding at the time of abandonment. We are actively seeking to develop licensing agreements in this regard to provide the right to develop and market these “orphaned” technologies and product lines.

In addition to our licensed technologies, we may develop technologies on our own as a result of our research or joint development activities.

We also have developed a Science Advisory Board (“SAB”). Through the relationships with our SAB members, we have the exclusive right to certain intellectual property rights derived from their respective work for the Company. To date, we have not filed any applications to protect intellectual property rights derived from work provided to the Company by a member of the SAB. Nonetheless, much of the Company’s scientific decision making process is guided in part by our SAB members.

We also intend to review, and as such opportunities present themselves, seek to acquire synergistic assets and businesses, although these are not within the Company’s primary initial focus as management believes that initial development, manufacturing and commercialization will be most economical through joint venture or third party OEM manufacturers we contract.

The execution of our business requires sufficient amounts of cash. The Company has found the current economic environment extremely challenging in terms of finding investors who are willing to invest cash into the Company. The inability to raise cash gives rise to the Company considering numerous alternatives to its current business, including focusing more attention on acquiring assets and other businesses that may provide value for shareholders sooner than the current life science focus of the Company. In any case, until the Company has sufficient cash to operate or is able to acquire assets that produce value for shareholders, the value of the company will be severely limited by these facts.

Sponsored Research Agreements with UCI

Sponsored Research Agreement with UC Regents (September 2010)

As of September 22, 2010, Shrink entered into the EB Research Agreement with UC Regents on behalf of the Irvine Campus. The EB Research Agreement was for a term of three months, retroactively beginning August 1, through October 31, 2010. Although the term end date has passed, this agreement has not been terminated and work is ongoing with the project based on a good faith between the two parties. The EB Research Agreement was terminable by the Company or UCI subject to satisfying the appropriate notice requirements required under the agreement.

The EB Research Agreement provided, among other things, that the Company sponsor specified research relating to the development of a complete system for culturing, imaging, and digitizing a large number of embryoid bodies (EBs) in custom-designed microfluidic devices, including developing protocols for staining and imaging EBs in 3-D. In addition, the research involved specifying and testing a suitable hardware/software platform for collecting images in a high-throughput setting. Regarding any inventions, discoveries or other commercially useful research products that may arise from research being conducted under the SRA, we will have a time-limited, first right to negotiate an exclusive license of such things with UCI.

The Company’s research sponsorship obligations require it to provide funding (which may be from the Company or other third parties) totaling up to $67,040 during the three month term of the EB Research Agreement.

To date the Company has paid $5,000, and at September 30, 2012 owes $12,598 under this agreement. No assurance can be made that the Company will attain the funding necessary to fulfill its funding obligations under the SRA or, that the research performed will necessarily produce commercially viable new inventions. In addition, in the event that discoveries are made, no assurance can be made that the Company will be able to fund commercialization of these technologies or that it will exercise its right to an exclusive license of these products.

Sponsored Research Agreement with UC Regents (May 2010)

As of May 3, 2010, Shrink Parent entered into the Sponsored Research Agreement or, the “Biosensing Research Agreement”, with UC Regents on behalf of UCI. The Biosensing Research Agreement is for a term of three years or such time as the research is completed, whichever is longer. The Biosensing Research Agreement may be terminated by the Company subject to satisfying appropriate notice requirements required under the agreement.

The Biosensing Research Agreement provides, among other things, that the Company will sponsor specified research relating to development of (i) integrated, manufacturable, nanostructured substrates for biosensing and testing of new bioassays as well as assessing viability of other shrinkable materials, and (ii) stem cell tools that use shrinkable plastic microfluidic technologies, each as more fully provided in the Biosensing Research Agreement. The Biosensing Research Agreement provides that the Historically, we have spent far less than the amounts we are otherwise committed to under the UCI Biosensing SRA. We have exclusive access to license intellectual property from the Biosensing Research Agreement beginning from July 1, 2009 forward according to the terms of the Biosensing Research Agreement.

Obligations under Biosensing Research Agreement

The Company’s research sponsorship obligations require it to provide funding (which may be from the Company or other third parties) totaling $632,051 during the three year term of the Biosensing Research Agreement. To date the Company has paid $20,000 to the UC Regents and owes $59,302 under this agreement. The Company does not have any capital commitments to satisfy the required cash payments under this contract. Any funding amounts under the Biosensing Research Agreement are subject to adjustment down based on actual expenditures on the research.

Additional IP that is subject to our license rights under the UCI Biosensing SRA includes both research performed under the specified work order of the UCI Biosensing SRA, as well as discoveries developed between July 2009 and May 3, 2010 by Dr. Michelle Khine that name Dr. Khine as primary inventor, and which are not under pre-existing obligations to third parties.

We are also required to indemnify UC Regents and certain affiliates from losses and claims stemming from the agreement.

The Biosensing Research Agreement provides that in the event that we desire to license Additional IP, if any is discovered, such license must be pursuant to license terms annexed to the Biosensing Research Agreement (the “UCI Biosensing License”). We are not required to pay an initial license issue fee, and the terms of the annual license fee is $5,000 for rights to each Additional IP license we acquire, with an overall license maintenance fee of $10,000 per annum commencing the fourth year after entry into the license (the “License Date”). In addition, we will be required to pay a fee of 30% of certain income generated from third party sublicenses of the Additional IP that are covered under the UCI Biosensing License, as well as royalty payments of: 2.5% of net sales where the first sale occurs within three years after the License Date; 4% of net sales where the first sale occurs between three and six years after the License Date; and 5% of net sales where the first sale occurs beyond six years after the License Date. In each case, the minimum earned royalty payment paid shall be $15,000 commencing the year of the first commercial sale of the Additional IP licensed, subject to increase, if and as we expand the UCI Biosensing License to include additional patents from time to time. With respect to any patent comprising the Additional IP, UC Regents reserves the right to utilize such intellectual property in connection for educational and research purposes, including research conducted for other sponsors. A copy of the UCI Biosensing SRA License is included as an annex to the Biosensing Research Agreement, filed as an exhibit to our public filings, and is incorporated by reference herein.

Results of UCI Biosensing Research To Date

To date, the Biosensing Research Agreement has led to two patent applications being filed with the USPTO.

We do not have any commitments for financings or grants for this agreement and no assurance can be made that the Company will attain the funding necessary to fulfill our funding obligations under the Biosensing Research Agreement or, that the research performed will necessarily produce commercially viable new inventions. In addition, in the event that discoveries are made, no assurance can be made that the Company will be able to fund commercialization of these technologies or that it will exercise its right to an exclusive license of these products.

License Agreement with University of Chicago - Sold

Effective June 3, 2011, following the Share Exchange with BlackBox Subsidiary the License Agreement with the University of Chicago is no longer a part of our operations and business focus.

Proceeds of Debt Financing

Private Placement of 12% Convertible Notes and Series B Warrants

During November 2010, the Company issued, $117,000 in 12% convertible notes convertible at $.10 per share (post forward split), and 585,000 Series B Common Stock Purchase Warrants, exercisable at $0.20 per share (or, “Series B Warrants”) for a cash purchase price of $117,000. The Notes and Series B Warrants were sold at face value for each dollar amount of Notes sold. No placement agent compensation has been paid in this financing.

The foregoing are the material terms of the 12% note and Series B Warrant financing.

2009 Private Placement of 12% Convertible Notes and Series A Warrants;

Between November 2009 through May, 2010, the Company issued, on a private basis, $635,000 (inclusive of $100,000 reported in our Annual Report on Form 10-K, as previously filed) of 12% convertible notes initially convertible (post forward split) at $.10 per share, and 2,675,000 Series A Common Stock Purchase Warrants, exercisable at $0.20 per share (or, “Series A Warrants”) as part of a private financing at face value for a purchase price of $535,000. The notes are repayable one year from issuance (with some of the earliest issued notes becoming due in November 2010) and the warrants are exercisable commencing 6 months from issuance and expire 36 months from issuance. At any time following its maturity date, the Company may induce conversion of the notes at a discounted rate at 80% of the effective conversion price. In November 2010 to January 2011, the Company note holders with total principal balances of $575,000 and accrued interest of $65,694 converted their principal and interest into 6,406,940 shares of common stock, and such notes, to the extent converted are deemed satisfied and discharged in full, with $60,000 of principal and their accrued interest remaining outstanding.

When combined with notes and warrants sold during late fiscal 2009 (and not including any 14% convertible notes issued to Noctua Fund, LP) the following (and not including any 14% convertible notes issued to Noctua Fund, LP) is a brief summary of the notes and warrants outstanding:

$177,000 principal amount 12% convertible notes, currently convertible at $.10 per share into an aggregate of 1,777,000 shares of common stock (plus shares issuable as interest), payable one year from their respective issuance dates. The note was converted on October 28 2011.

3,175,000 Series A Warrants, exercisable at $.20 per share, and expiring three years from their respective issuance dates.

585,000 Series B Warrants, exercisable at $.20 per share, and expiring three years from their respective issuance dates in 2010.

The foregoing are the material terms of the 12% note and Series A and B Warrant financing. Other details of the same may be found below in this Annual Report.

All Noctua, BCGU, Noctua Fund LP instruments, both debt and equity, in regards to the 50% interest owned by Mark L. Baum, Esq., were acquired for value by an entity indirectly controlled by James Panther, in April 2012.

Sponsored Research Agreement with UC Regents (September 2010)

No assurance can be made that the Company will attain the funding necessary to fulfill its funding obligations under the SRA or, that the research performed will necessarily produce commercially viable new inventions. In addition, in the event that discoveries are made, no assurance can be made that the Company will be able to fund commercialization of these technologies or that it will exercise its right to an exclusive license of these products.

The Biosensing Research Agreement provides, among other things, that the Company will sponsor specified research relating to development of (i) integrated, manufacturable, nanostructured substrates for biosensing and testing of new bioassays as well as assessing viability of other shrinkable materials, and (ii) stem cell tools that use shrinkable plastic microfluidic technologies, each as more fully provided in the Biosensing Research Agreement. Historically, we have spent far less than the amounts we are otherwise committed to under the UCI Biosensing SRA. The Biosensing Research Agreement provides that the Company shall sponsor the research costs up to a budget of $632,051, of which $20,000 has been paid to the UC Regents. We have exclusive access to license intellectual property from the Biosensing Research Agreement beginning from July 1, 2009 forward according to the terms of the Biosensing Research Agreement.

The Company’s research sponsorship obligations require it to provide funding (which may be from the Company or other third parties) totaling $632,051 during the three year term of the Biosensing Research Agreement. Of this amount $202,796 is to be paid during the 12 month period ended April 30, 2011; $211,311 shall be paid during the 12 month period ended April 30, 2012; and the remaining $217,944 shall be paid during the 12 month period ended April 30, 2013. The foregoing payments are to be paid in quarterly installments of ¼ of the total cash fees payable during such 12 month period.

We are also required to indemnify UC Regents and certain affiliates from losses and claims stemming from the agreement.

The UCI Biosensing SRA provides that in the event that we desire to license Additional IP, if any is discovered, such license must be pursuant to license terms annexed to the UCI Biosensing SRA (the “UCI Biosensing SRA License”). We are not required to pay an initial license issue fee, and the terms of the annual license fee is $5,000 for rights to each Additional IP license we acquire, with an overall license maintenance fee of $10,000 per annum commencing the fourth year after entry into the license (the “License Date”). In addition, we are required to pay a fee of 30% of certain income generated from third party sublicenses of the Additional IP that are covered under the UCI Biosensing SRA License, as well as royalty payments of: 2.5% of net sales where the first sale occurs within three years after the License Date; 4% of net sales where the first sale occurs between three and six years after the License Date; and 5% of net sales where the first sale occurs beyond six years after the License Date. In each case, the minimum earned royalty payment paid shall be $15,000 commencing the year of the first commercial sale of the Additional IP licensed, subject to increase, if and as we expand the UCI Biosensing SRA License to include additional patents from time to time. With respect to any patent comprising the Additional IP, UC Regents reserves the right to utilize such intellectual property in connection for educational and research purposes, including research conducted for other sponsors. A copy of the UCI Biosensing SRA License is included as an annex to the UCI Biosensing SRA, filed as an exhibit to our public filings, and is incorporated by reference herein.

Our research sponsorship obligations require us to provide funding (which may be from us or other third parties) totaling $632,051 during the three year term of the UCI Biosensing SRA. Any funding amounts under the UCI Biosensing SRA are subject to adjustment down based on actual expenditures on the research.

The foregoing is a summary only of the UCI Biosensing SRA (which includes the form of UCI Biosensing SRA License annexed thereto), which is filed as an exhibit to our public filings.

To date, the UCI Biosensing SRA has led to two patent applications being filed with the USPTO.

No assurance can be made that the Company will attain the funding necessary to fulfill its funding obligations under the SRA Agreement or, that the research performed will necessarily produce commercially viable new inventions. In addition, in the event that discoveries are made, no assurance can be made that the Company will be able to fund commercialization of these technologies or that it will exercise its right to an exclusive license of these products.

License Agreement with University of Chicago

This agreement was in effect until June 2011 when it was sold to a related third party.

General

We are, with our subsidiaries, dedicated to commercializing biotechnology and other high technology intellectual property, know-how and related products, from universities and medium to large commercial businesses, that may be deployed as commercial products or licensing opportunities We have also recently undertaken a program to seek to acquire small companies with developed and ready-to-go-to-market products, strong intellectual property portfolios, management and operational infrastructure. Historically, we have primarily focused our resources in the life sciences market; however, we also have successfully acquired technologies in, for example, the semiconductor space. With all technologies we acquire and allocate resources to, our objective is to develop products and intellectual property resources in order to generate cash flow, and ultimately, value for our shareholders.

The Company has undergone, and continues to undergo, marked and sometimes volatile operational changes as we attempt to transition towards commercialization efforts and liquidate undesired assets.

Our business currently consists of four operating units: Cell Culturing Products ; Microfluidic Systems and Kits ; Special Substrates ; and Internal Development and Acquisitions .

Our corporate mission is to become a leading high technology development company. While we presently possess unique product and technology capabilities for the cell culture, immunoassay development, cell imaging, device prototyping and drug discovery markets, we intend to continue to create shareholder value through organic and inorganic growth.

The Company reports its business under the following SIC Code:

SIC Code

Description

3674

Semiconductors and Related Services

Business Focus

Business Strategy

Our business strategy, based on the FIGA ™ model, is to use experts from critical economic segments in order to meet commercial ends. Our strategy is to fund research in outside (typically academic) research labs, all of which we have established technology development and in some cases, licensing arrangements with. Around our “hub” of mainly academic research relationships, we connect teams consisting of people with financial, related industry (physical or life sciences) and government (typically regulatory) backgrounds. We use these teams to assess internal and external opportunities, to first determine the commercial viability of the technology, and then to create specific commercialization plans for the same technology.

Assets; Intellectual Property and Research Agreements

Our assets include certain intellectual know how, patent rights and trademarks as more fully described in this Report from agreements with third parties, as follows:

The Company has dissolved its Shrink Solar, LLC entity which had no revenues or assets.

The material terms of the Share Exchange were:

Shrink Nanotechnologies, Inc. issued 14,000,000 shares of restricted common stock to BlackBox Parent and 100% equity interest in BlackBox Subsidiary. In exchange, Shrink Nanotechnologies, Inc. will receive $75,000 cash payable prior to December 31, 2011, and 27,030,000 shares of BlackBox Parent, representing approximately 19.9% of BlackBox Parent’s equity at the time of the transaction. The cash received from the transaction shall be used to recover costs Shrink Nanotechnologies, Inc. invested into BlackBox Subsidiary. Shares of BlackBox Parent will either be sold or spun off to shareholders in whole or in part pursuant to an effective registration statement, as may be determined by the board at a later date, if and when such shares become liquid. In October 2011, the Company agreed to settle the payable of $75,000 due in December 2011 from BlackBox Parent as related to the Share Exchange for immediate payment of $12,500. This amount was paid on October 25, 2011, and there are no other amounts are due as related to this agreement and the Company.

Discussion of Business Strategy; Short Term Goals

Although management constantly monitors market trends, as well as available capital and has in the past, and continues to, refine and re-prioritize the Company’s goals, so as to attain commercialization as quickly as possible, the goals we will need to attain for our various businesses are currently: (1) commercialization of existing and newer commercial versions of StemDisc ® , Cell Align ® and NanoShrink ® products; (2) entering into a joint development agreement to commercialize the Corning microfluidic system; (3) joint development of certain materials from our Special Substrates business unit; and (4) entering into technologically accretive and synergistic acquisitions.

In addition to our licensed technologies, we may develop technologies on our own as a result of our research or joint development activities.

Short-Term Business Goals

Although management constantly monitors market trends, as well as available capital and has in the past, and continues to, refine and re-prioritize the Company’s goals, so as to attain commercialization as quickly as possible, the goals we will need to attain for our various businesses are currently: (1) commercialization of existing and newer versions of StemDisc™, Cell Align™ and NanoShrink™ products; (2) entering into a joint development agreement to commercialize the Corning microfluidic system; (3) joint development of certain materials from our Special Substrates business unit; and (4) entering into technologically accretive and synergistic acquisitions.

Product and Technology Overview (By Business Unit)

Cell Culturing Products

StemDisc™ and Stemage Software

StemDisc™ is a cell culture platform designed to uniquely produce uniform embryiod bodies (EBs) and other spheroid tissues. The device is made with 24-well bottomless wellplate and an embossed micro-well substrate. This product is expected to be our first commercial product offering and we anticipate to begin commercial sales this year. We also expect to begin the development of additional mold and wells, based on customer feedback and the success of our initial StemDisc™ product launch. Stemdisc™ will be primarily marketed for use in the life sciences industry.

Stemage™ is tradename for our proprietary software that will integrate into nearly all major manufacturer microscopy platforms and enhances the usefulness of our StemDisc™ hardware, enabling biology researchers to geo-locate, count and 2D image thousands of individual samples on a single SBS footprint well plate. We have completed several prototypes of Stemage™ and expect to deploy a trial (beta) version this year. We hope to eventually sell premium versions of Stemage™ once we establish a customer base, but also integrate the ability to perform high quality 3D imaging as well, along with additional planned features.

Cell Align™

Cell Align™ is a patent-pending cell culture platform used to orient cell cultures. The device is a surface treated substrate with non-periodic uni-axial features that have been documented to uniquely and successfully orient tissues in culture. The productization of Cell Align (in various formats, including discs at the bottom of well plates and larger sizes of Cell Align in dishes) fits well with our abilities. The product has the potential to offer higher margins than some of our other offerings and we believe will have a high value use for numerous applications involving cell and tissue biology.

Microfluidic Systems and Kits

Corning Incorporated

Earlier in 2011, we secured an exclusive license to a then patented pending complete microfluidic system that was developed at Corning Incorporated. The system, which has ancillary pumping, heating and electronics systems, has numerous applications in the small but growing microfluidics market. The most interesting aspect of the technology are the “inter-connects” between parts of the system (which is similar to the way “Lego™” blocks work). We believed then and still believe the intellectual property for the interconnects of the Corning system will drive the potential for the Corning system to perhaps establish a “standard” for the microfluidics space.

On April 5, 2011, the USPTO issued patent 7.919,062 to Corning, entitled “Modular Microfluidic System and Method for Building Modular Microfluidic Systems.

NanoShrink™ Film Kits

NanoShrink™ and other shrinkable plastic substrates that we are developing are used in countless industrial applications because of their flexible material properties and relative material stability. By taking advantage of these inherent characteristics, NanoShrink™ is being developed for the ultra-rapid direct patterning of complex, even three-dimensional, stacked polystyrene micro- and nanostructures as well as low cost optoelectronic devices. Management believes that NanoShrink™ and similar materials readily available at economic rates both in the US and abroad as the demand for low cost diagnostics in low resource settings increases.

What follows are some examples of technological and/or cost benefits of our shrinkable plastic-based technologies over other competing technologies.

Quicker Manufacturing. Developing intricate micro patterns into substrates of silicon, glass, or quartz requires large investments in capital equipment, manufacturing “clean rooms”, and costly consumables. The soft lithography processes which we use, we believe, can accelerate microfluidic chip fabrication from weeks or months (using standard silicon technology) to typically less than 2 days.

Better Material Characteristics. We believe that our shrinkable technology using NanoShrink is advantageous over other substrates such as silicon because of its desirable flow characteristics in microfluidic applications. Microfluidic devices typically require dimensions in the 100 μ m range, whereas we are able to achieve resolutions near 70 μ m in width and operate well within the requirements and capabilities of current lithography techniques. PDMS is a standard material used to create 2 dimensional microfluidic systems. However, many hydrophobic molecules absorb easily into the porous PDMS matrix of competing technologies, potentially affecting results which have intolerable in many applications. So far, testing indicates that NanoShrink™ is not as easily impacted by solvents or environmental factors such as extreme heat, cold or physical impact. For this reason as well as the other reasons relating to ease and economics in manufacture, we believe that shrinkable plastic materials (such as NanoShrink™ ) may be an ideal material for products such as cell-culture dishes and plates used in drug discovery. We believe that this is one property that links industry adoption of PDMS for applications in drug discovery and other sensitive assays.

Design and Manufacturing Efficiencies; Three Dimensional Structures. Traditional photolithography creates planar or 2-dimensional structures. Rounded and/or multi-height features are therefore difficult to create and require additional processing steps. To achieve multi-heights, several masks and high precision alignment are required. Our processes, we believe, creates inherently rounded features, and multi-heights are easily achievable. Additionally, because of the unique characteristics of our shrinkable plastic technologies, design and fabrication can occur sequentially, with immediate results allowing for quick turn-around prototype testing.

We believe that we now have developed significant proprietary know-how with respect NanoShrink™ and the kits we intend to offer for sale. We have however built numerous systems of various materials along with special tools (e.g. an oven, as well as trays and presses) which we intend to launch in the next year, depending on the results of ongoing performance reviews. The systems we have built also appear to work with inks and metals, which will potentially open the uses for the material and tools well beyond the life science business.

Special Substrates

Assays and Special Substrates

We have created a number of dynamic Low Precision NanoShrink™ shrink film product categories. There are two main types of products we are working on: Uni-Axial (left below, as in the case of Cell Align) and Bi-Axial Films (right below). Some are metalized and others are not. We also have additional treatments and surface enhancements for films that broaden the applications of the materials we research and make. Our non-metalized surface enhancements are, we believe, those most likely to result in a commercial application, although we continue to conduct research on these materials.

“Petal Based” NanoShrink ™ and Special Substrates

We believe that through continued research and development, these substrates may act as an “enhancement material” to enable immunoassays to produce higher quality results. This is a large market potential application.

We have conducted initial studies with one large immunoassay business using our materials. We did a head-to-head study, testing one of their leading immunoassays against the same test which used one of our metalized shrink film substrates. Our testing showed that our methodologies enables us to reduce the “noise” of the subject immunoassay, even when a very aggressive dye candidate was utilized.

Although this work did not ultimately yield a commercial relationship or license, we did yield good enough results to continue our work in this area. Additionally, today, we have materials that work much better than those we used in the study. Also, the subject project, while successful, was done under non-optimal conditions and was being performed by students primarily in Dr. Khine’s lab. We believe it makes sense to put together a more controlled and reliable study of the material under more optimal real world conditions.

We plan to continue to pursue this project with additional resources (both third party and our own) when the time is right.

Internal Development; Acquisitions (and Divestitures)

Ultra Hydrophobic Surface Treatments

We are working with a large multi-national corporation under a material transfer agreement to provide them with low haze ultra hydrophobic materials. There are numerous large market applications for these materials. We have supplied our initial quantities of these materials and are presently awaiting feedback.

Lydall’s Solupore®

In May 2010, we signed a development agreement with Lydall to use their Solupore material in one of a number of strategic ways.

Reproductive Sciences Project

We have an exclusive option to license patent pending IP which is owned by Dr. Elliot Botvinick, a professor at UCI, Dr. Michelle Khine and Mark L. Baum, our former founder and CEO. The project relates to the idea of commercializing the racing of, in microfluidic devices, various motile biological agents. There is an advertising and gaming business model associated with the IP.

Recently we hired a part time consultant to provide us with a proof of concept video demonstration of what would be the world’s first controlled race between a single species or multiple species in a sub-millimeter channel “track” (i.e. a microfluidic track).

Acquisitions

We executed a binding letter of intent with Nanopoint, Inc., a Hawaii-based life sciences instrumentation business. This event was reported in a Form 8-K filed with the SEC on April 12, 2011. The pending transaction was terminated prior to completion.

Technology and Intellectual Property

We develop intellectual property (“IP”) internally, and our objective is to acquire IP through sponsored research agreements and related licensing agreements and through stand-alone licensing agreements. A description of all of our material agreements and related technologies, applications and cost estimates is provided below along with a list of patents and other intellectual property owned by or licensed to us. Additionally, we have filed applications with the USPTO, and as a result of our research and experience, we possess significant proprietary know-how outside of the technologies that we licensed, as it relates to using shrinkable films in the manner in which we seek to design and build products for the life sciences.

Product Commercialization and Marketing

We intend to increase our focus on commercialization by, in part, inorganically acquiring distribution for our products (i.e. acquiring synergistic businesses with established distribution channels). In each business unit, presuming adequate funding and that no unusual impediments are incurred, we do not foresee any limitation on our ability to continue to design and eventually market the related products for our businesses.

Sponsored Research Agreements with UCI

Sponsored Research Agreement with UC Regents (September 2010)

To date the Company has paid $5,000, and at December 31, 2012 owes $12,598 under this agreement. No assurance can be made that the Company will attain the funding necessary to fulfill its funding obligations under the SRA or, that the research performed will necessarily produce commercially viable new inventions. In addition, in the event that discoveries are made, no assurance can be made that the Company will be able to fund commercialization of these technologies or that it will exercise its right to an exclusive license of these products. The Company has discontinued research in regards to this agreement.

Sponsored Research Agreement with UC Regents (May 2010)

The Biosensing Research Agreement provides, among other things, that the Company will sponsor specified research relating to development of (i) integrated, manufacturable, nanostructured substrates for biosensing and testing of new bioassays as well as assessing viability of other shrinkable materials, and (ii) stem cell tools that use shrinkable plastic microfluidic technologies, each as more fully provided in the Biosensing Research Agreement. Historically, we have spent far less than the amounts we are otherwise committed to under the UCI Biosensing SRA. We have exclusive access to license intellectual property from the Biosensing Research Agreement beginning from July 1, 2009 forward according to the terms of the Biosensing Research Agreement. The Company has discontinued research in regards to this agreement.

Obligations under Biosensing Research Agreement

We are also required to indemnify UC Regents and certain affiliates from losses and claims stemming from the agreement.

License Agreement with University of Chicago - Sold

Effective June 3, 2011, following the Share Exchange involving our BlackBox Subsidiary the License Agreement with the University of Chicago is no longer a part of our operations and business focus.

Agreements Terminated in 2010

During 2010 the Company terminated certain agreements for economic reasons and because alternative resources were available. These terminated agreements include:

Our original microfluidics research agreement with the University of California, Merced, originally entered into in May 2009, and the underlying Exclusive License Agreement with the UC Regents, Merced, for Processes for Microfluidic Fabrication and Other Inventions. We no longer rely on these patents or intellectual property rights. Nonetheless, the Company still owns and maintains its rights to the ShrinkChip® related trademarks, which were not part of the terminated agreement. The Company will not be refunded its initial research and license fees paid (amounting to $90,985 and 495,500 shares issued to date), and the Company has certain additional further material liabilities under this agreement relating to patent filing legal prosecution costs or development fees of up to $234,000, which are subject to dispute. In addition, the Company is required to cover certain legal patent costs during the 90- day period after termination.

Because the Company no longer is focusing on its solar segment, the Company also terminated its Strategic Marketing and Development Agreement (the “Marketing Agreement”) with Inabata America Corporation. This agreement provided for the appointment of Inabata as the Company’s non-exclusive representative for the purposes of marketing and promoting the Company’s solar concentrator technology and ShrinkChip™ RPS solar products to third parties (the “ Solar Products ” ).

Trademarks

We hold a number of trademarks and service marks and have been using most since late 2008 to early 2009. These marks have also been filed with the USPTO and include the following:


Trademark	Shrink Trademarks	Date Filing or Issue
77/822182	StemDisc™	9/8/2009
77/822211	Cell Align™	9/8/2009
77/822232	Metalfluor™	9/8/2009
77/822176	Shrinkchip™	9/8/2009
77/853822	Nanoshrink™	10/21/2009
77/822153	Shrink™	9/8/2009
Reg. No. 3866464	Shrink®	10/26/2010

Our Patent Filing Policy

We are required by the Corning License Agreement and the Chicago License Agreement to pay the costs of obtaining patents, and the Company’s board of directors along with the Shrink Scientific Advisory Board, intend to regularly reassess the technologies and applications we have, develop, or acquire an interest in, to determine, in good faith, whether the benefits of obtaining a patent outweigh the costs of obtaining it and the resulting public disclosure of our processes, technologies or proprietary technologies.

In June 2011, in the disposition of Blackbox, the patents related to the Chicago License Agreement were maintained by Blackbox post-disposition.

No assurance can be made that the Company will be able to assess the patent-worthiness of all its products, or, if a patent is desirable, that the Company will have sufficient funds or wherewithal to secure or prosecute its intellectual property rights.

Research and Development Priorities and Expenditures

We estimated that Shrink has invested approximately $____ and $109,739 into its technologies in 2012 and 2011, respectively, primarily from government and university grants and direct investments by Shrink using cash on hand, and $122,416 into its technologies in 2009, most of which has stemmed from payments from Shrink through UC Merced and UC Irvine or, to a limited extent, California Institute for Regenerative Medicine (CIRM). (See “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations” below).

In determining our allocation of resources, we assess which fields we believe are closer to commercial development and which we believe hold greater financial and strategic potential for us. Our goal is to penetrate those areas that we are most prepared to commercialize and that have the fewest relative barriers to market acceptance. In order to best describe the fields and the relative priority of each to us at this time, what follows is a summary of applications currently being pursued in order of currently intended priority.

In June 2010, we became a part of the MF3 Consortium. Formed in 2006, the MF3 Center brings together 20 leading micro-and nano-fluidics professors from 12 universities nationwide to advance the basic science and applications of a field seen as key to creating a vast array of new technologies. With scientists representing the disciplines of biomedical engineering, mechanical engineering, electrical engineering, and chemistry, MF3 research is expected to apply to many areas including health care, electronics, and environmental and food monitoring. MF3 is funded by the Defense Advanced Research Projects Agency (DARPA) and the Centers industrial members. MF3 is a spin-off of activities ongoing at the Integrated Nanosystems Research Facility, an interdisciplinary research laboratory at the Henry Samueli School of Engineering at UC Irvine.

As a result of our membership in MF3, we qualify to have every dollar we invest in research through a MF3 member professor, matched by 50%. This means that when we spend $20,000 through our SRA with Dr. Michelle Khine, we receive an additional $10,000 in our account for the subject project.

Agreements Terminated in 2010

University of California at Merced

In December 2010, due to high costs and poor results, we terminated our research agreement (signed in May 2009) with the University of California, Merced (“UC Merced”) and our Exclusive License Agreement with the UC Regents relating to microfluidics (the “UC Regents Microfluidics Agreement”). As a result we abandoned IP rights owned by the UC Regents associated with these agreements.

Our Exclusive License Agreement with the UC Regents; Exclusive Patent Licenses (Terminated)

On April 29, 2009 and pursuant to the terms of the Research Agreement, Shrink and the UC Regents entered into an Exclusive License Agreement for Processes for Microfluidic Fabrication and Other Inventions. The UC Regents Microfluidics Agreement was terminated in December 2010.

Shrink no longer relies on any patents or other intellectual property rights licensed under the UC Regents Microfluidics Agreement. Nonetheless, the Company still owns and maintains its rights to the ShrinkChip™ related trademarks, which were not part of the terminated UC Regents Microfluidics Agreement. The Company will not be refunded its initial research and license fees paid (amounting to $90,985 and 495,500 shares issued to date), and the Company has certain additional further material liabilities under this agreement relating to patent filing legal prosecution costs or development fees of up to $234,000, which are subject to dispute. In addition, the Company is required to cover certain legal patent costs during the 90- day period after termination.

Inabata America Corporation

In September 2009, we entered into a Strategic Marketing and Development Agreement (the “Marketing Agreement”) with Inabata America Corporation (“Inabata”), a subsidiary of Inabata & Co. Ltd., which provides for the appointment of Inabata as the Company’s non-exclusive representative for the purposes of marketing and promoting the Company’s solar concentrator technology and ShrinkChip™ RPS solar products to third parties (the “Solar Products” ). Because we ceased our work in the solar energy space, the agreement with Inabata is no longer relevant to our operational focus.

Employees

We currently have no employees and resort to management and subcontractors for all services. During 2012, there were no full time employees.

We hire independent contractor labor for executive management, legal, accounting and other administrative functions, on an as needed basis and have entered into consulting arrangements with certain directors and advisory board members in exchange for stock or derivative securities. We have not entered into a collective bargaining agreement with any union.

Competition

There are numerous competitors in every space/market we seek to exploit, with the strongest competitors in the life sciences industry boasting large market capitalizations and liquidity, as well as scientific and marketing resources and recognition.

While competing technologies and companies exist for all of our products, we believe that we have certain opportunities that we can exploit which may increase our opportunity to be successful in the markets we seek to exploit. However, even if our technologies are successful, no assurance can be made that we will be able to compete effectively and yield significant or sustained value for our shareholders. We continue to require access to capital, tested IP and bright and motivated people, the lack of which remain impediments to our success.

Government Regulation

Shrink is a research and development business and to date, has not commercialized or sold any products using its technologies. Therefore, the Company cannot be certain exactly which governmental regulations will ultimately be applicable to the final products. However, certain of our products and manufacturing processes will be subject to regulation under various portions of the U.S. Federal Food, Drug and Cosmetic Act, if we consider expanding our applications for use in or as part of certain medical devices or in vitro diagnostic devices. The effects of this are that, among other things, our manufacturing facilities, when and if created, may be subject to delays on approval, and periodic inspection by the U.S. Food and Drug Administration, or FDA, other product-oriented federal agencies and various state and local authorities in the U.S. for compliance with the requirements of the FDA’s Quality System Regulation (formerly known as Good Manufacturing Practices), other federal, state and local regulations and other quality standards such as ISO 9001 or ISO 13485.

To the extent our products are used in medical devices or other regulated applications, our products may be subject to extensive medical, FDA or other government regulation, testing and pre-market approval or clearance processes. Prior to application for approval or clearance, we may need to conduct clinical trials to test the safety and efficacy of our products or we may be required to identify predicate devices to which we can establish substantial equivalence. In addition, we may be required to satisfy testing criterion or submit product applications in other countries where we intend to market our goods. These processes may take an extensive period of time and would necessarily require significant capital outlays, which we have no commitments for at this time.

We do not use and we anticipate that we will not utilize, manufacture or operate with substances deemed controlled under the Controlled Substances Act, administered by the Drug Enforcement Agency, or DEA, and therefore, no special procedures need be in place.

Because we do not actually do any material amount of testing, but rather, the manufacturing of devices that will be used as “tools”, we do not employ Centers for Disease Control/National Institutes of Health, Guidelines for Research Involving Recombinant DNA Molecules, Biosafety in Microbiological and Biomedical Laboratories, but, if and as our operations expand, may be required to do so in the future.

We are subject to federal, state, and local laws and regulations regulating the discharge of materials into the environment, or otherwise relating to the protection of the environment, in those jurisdictions where we operate or maintain facilities. Our operations to date have only been R&D and within universities in the State of California. Therefore, we do not believe that any liability arising under, or compliance with, these laws and regulations will have a material effect on our business, and no material capital expenditures are expected for environmental control.

Environmental Laws

To date, we have not encountered any costs related to compliance with environmental laws.

Corporate History and Structure

General

We were incorporated in the state of Delaware on January 15, 2002 as Jupiter Processing, Inc. On January 13, 2005, the Company changed its name to Audiostocks, Inc. On May 14, 2009, the Parent company changed its name to Shrink Nanotechnologies, Inc. in anticipation of its acquisition of Shrink Technologies, Inc. On May 29, 2009, the Company entered into and completed a share exchange agreement with the former principals of Shrink Technologies, Inc., for the acquisition of Shrink.

The exchange of shares with Shrink’s owner was accounted for as a reverse acquisition under the purchase method of accounting with the business of Shrink Technologies, Inc. as the surviving company for accounting and financial reporting purposes.

As of December 31, 2012, Shrink determined that all future economic benefit will be derived from operations that existed as of that date, and all prior operating assets were fully impaired.

Below is a chart of our organizational structure:

The Company has negotiated a spin off transaction to sell our BlackBox business and retain approximately 20% of the equity in the post-spin-out business (pre dilution).

Our common stock is quoted on the OTC Market under the symbol “INKN.”

Our principal operational offices are located at 7020 Belcrest Drive, Plano, Texas 75024. Our principal corporate contact is Norman Meier and may be reached at 760-5762-7119.

ITEM 1A. RISK FACTORS

We have not yet commercialized products from our technologies and therefore have not attained revenues from them. The nature of our business activities subjects us to certain hazards and risks and uncertainties. We are a research and development stage company that will need substantial additional capital and development to be able to commercialize and gain market acceptance for our innovative products. You should carefully consider the risk factors and all of the other information included in, or incorporated by reference into, this Report or any supplement, including those included in our most recent Reports or documents provided as exhibits to this Report or other Reports as may be incorporated from time to time.

An investment in our Common Stock involves a high degree of risk and should be made by those who are willing to and who can afford to lose their entire investment.

Our independent accounting firm and our board of directors, given the present resources and condition of the company agree that our internal controls are ineffective and that we may not be able to continue as a going concern. We are taking steps to correct our internal controls and are also moving to improve the financial condition of the company.

General Risks:

We may not be able to continue operations as a going concern and we need substantial additional capital to continue our research and development activities and begin commercialization plans. Research and Development costs of Shrink have been completely paid for to date by the UC Regents, and to a lesser extent, CIRM and our two of our founders, Baum and Panther, and we do not have any capital commitments at this time.

Our independent auditors have expressed doubt about ability to continue as a going concern. Shrink is, for all material purposes, currently a research and development company only. We do not have grant or capital commitments at this time and previous Shrink research has been funded by the UC Regents and CIRM. We have no further commitments for grants and grant funds cannot, generally, be used towards commercialization and manufacturing efforts. Accordingly, we will be dependent on obtaining additional external sources of capital in order to fund its operations or even continue as a going concern.

A future capital raise could involve a private or public sales of equity securities or the incurrence of additional indebtedness. Additional funding may not be available on favorable terms, or at all. If we borrow additional funds, we likely will be obligated to make periodic interest or other debt service payments and may be subject to additional restrictive covenants. If we fail to obtain sufficient additional capital in the future, we could be forced to curtail our growth strategy by reducing or delaying capital expenditures, selling assets or downsizing or restructuring our operations. If we raise additional funds through public or private sales of equity securities, the sales may be at prices below the market price of our stock, and our shareholders may suffer significant dilution as a result of such sale.

You will suffer immediate and subsequent dilution; and the costs of the securities you purchase may significantly exceed the price paid by current principal shareholders.

The Company has several convertible notes which are primarily controlled by affiliated entities of James B. Panther. The cost basis is less than the open market.

Some of our debt is in default and could result in us losing some or all of our assets.

The “default” status with respect to the notes owned by Noctua Fund LP, an affiliate of certain management, provides them with the right to take potentially aggressive actions, including levying on some or all of our assets, in order to recover monies owed. This default could result in an action against us, including, one for enforcement of their rights by levying our assets. The existence of a default also hinders our ability to raise additional capital or enter into long term contractual commitments.

Our Shrink subsidiary is a research and development startup company and has not generated any operating revenues and may never achieve profitability, and we have yet to commercialize its inventions.

Shrink is a risky and unproven development stage company and, to date, has not generated any revenues from sales. We cannot assure you that we will generate revenues or that we can achieve or sustain profitability in the future. Our operations are subject to the risks and competition inherent in the establishment of a business enterprise. There can be no assurance that future operations will be profitable. Revenues and profits, if any, will depend upon various factors, including whether our product development can be completed, and if we can achieve market acceptance. We may not achieve our business objectives and the failure to achieve such goals would have an adverse impact on us.

Preferred Stockholders maintain controlling interest of our stock; the existence of these derivative securities, may adversely affect your stock price and our ability to raise capital or into business ventures and transactions.

Currently, twenty million shares (20,000,000) of Series A Preferred Stock are issued and outstanding and held by a principal shareholder or their affiliates, namely Mr. Panther. These shares are all convertible and contain other restrictive covenants. As a result, over 90% of our voting control is vested in one beneficial owner. Moreover, as shares of preferred stock are converted and sold, such sales are likely to have a highly dilutive effect on our stock price.

Additionally, the existence of our outstanding preferred stock may hinder our ability to raise capital at favorable prices if and as needed, or to make acquisitions.

Our principal stockholders have the ability to exert significant control in matters requiring stockholder vote and could delay, deter or prevent a change in control of our company.

Since our stock ownership is concentrated among a limited number of holders, those holders have significant influence over all actions requiring stockholder approval, including the election of our board of directors. Through their concentration of voting power, they could delay, deter or prevent a change in control of our company or other business combinations that might otherwise be beneficial to our other stockholders. In deciding how to vote on such matters, they may be influenced by interests that conflict with other stockholders. Accordingly, investors should not invest in the Company’s securities without being willing to entrust the Company’s business decisions to such persons.

As a result, the forgoing and of our Series A Preferred Stock, members of management will be able to:

control the composition of our board of directors; control our management and policies;

determine the outcome of significant corporate transactions, including changes in control that may be beneficial to stockholders; and

act in each of their own interests, which may conflict with, or be different from, the interests of each other or the interests of the other stockholders.

Conflicts of interest between the stockholders and our company or our directors could arise because we do not comply with the listing standards of any exchange with regard to director independence.

There are a variety of conflicts of interests and related party transactions with members of management, which control the vast majority of our shares and our board. We are not listed on a stock exchange and our Board of Directors does not comply with the independence and committee requirements which would be imposed upon us if we were listed on an exchange. In the absence of a majority of independent directors, our directors could establish policies and enter into transactions without independent review and approval. This could present the potential for a conflict of interest between the stockholders and our company or our directors.

We have a significant amount of preferred stock, convertible debt and warrants outstanding. If we issue additional shares or derivative securities as we raise capital, the notes are converted or the warrants are exercised, you will suffer immediate and substantial dilution to your common stock.

The bylaws allow the board to issue common shares without stockholder approval. Currently, the board is authorized to issue a total of 475,000,000 common shares, of which 47% have been issued or reserved for issuance as of April 2012. In addition, the board is authorized to issue up to 25,000,000 preferred shares of which 20,000,000 are already designated and issue and an addition 5,000,000 “blank check” preferred may be issued. Currently, 224,746,249 shares of common stock are issued and outstanding and, the following shares are issuable underlying outstanding securities:

20,000,000 shares issuable upon conversion of Series A Preferred Stock, owned primarily by Panther and convertible on a one-for-one basis. On April 5, 2012, this debt instrument was acquired by an entity indirectly controlled by Panther.

1,770,000 shares of common stock issuable upon conversion of $177,000 principal amount of unsecured one year 12% convertible notes, convertible at $.10 per share, in addition to shares that may be issued in respect of interest payments which notes became due commencing February 2011. The note was converted on October 28, 2011.

3,175,000 shares issuable upon exercise of Series A Common Stock Purchase Warrants issued between November 2009 and May 2010, at $.20 per share.

585,000 shares issuable upon exercise of Series B Common Stock Purchase Warrants issued in November 2010, at $.20 per share.

20,890,196 shares issuable upon conversion of convertible notes with principal amounts totaling $973,121, issued to Noctua Fund, LP and BCGU, LLC, affiliates of Panther. These notes are in default and accrue interest 18%. Accrued interest on these notes at April 30, 2012 was $122,212. On April 5, 2012, all of the convertible debts owned by Noctua and BCGU, LLC were acquired by a single entity indirectly controlled by Panther.

Sales of a substantial number of shares of our common stock in the public market could depress the market price of our common stock and impair our ability to raise capital through the sale of additional equity securities.

In addition, it is not likely that we will be able to raise convertible debt or equity financing without issuing shares at or below market rates, which would cause further dilution to shareholders. Our board of directors has the authority, without the consent of any of the stockholders, to cause us to issue more shares or our common stock and shares of our preferred stock at such prices and on such terms and conditions as are determined by the Board in our sole discretion.

Moreover, cashless exercise provisions in warrants may have an additional adverse effect on the Company in that we would be required to reflect the value of such warrants as a potential liability to the Company. No assurance can be made, therefore, that we will be able to raise capital, or, if we do, that the same will not have a material adverse effect on our capitalization or to our balance sheet.

If additional funds are raised through the issuance of equity securities, the percentage of equity ownership of the existing stockholders will be reduced. The issuance of additional shares of capital stock by us would materially dilute the stockholders’ ownership in us.

Presently, we have under-qualified management operating the company.

The present management team is not experienced enough and sufficient in number to realize the potential of Shrink, especially with respect to developing commercial diagnostic device products and other technologies we are developing and may seek to market. It is very likely that more qualified managers, with significantly more experience in the businesses we seek to engage in, will need to be hired. The sooner we can hire these people the better. These persons will likely require substantial salaries and compensation packages that the Company cannot presently afford. Additionally, there may be substantial fees associated with recruiting new additional or replacement managers. To the extent that we are unable to ultimately bring managers into the Company who are more qualified than our present team, the Company and its shareholders will be negatively impacted.

Risks Relating to an Investment in Our Securities:

Anti-takeover provisions in our organizational documents and Delaware law may limit the ability of our stockholders to control our policies and effect a change of control of our company and may prevent attempts by our stockholders to replace or remove our current management, which may not be in your best interests.

There are provisions in our certificate of incorporation and bylaws that may discourage a third party from making a proposal to acquire us, even if some of our stockholders might consider the proposal to be in their best interests, and may prevent attempts by our stockholders to replace or remove our current management.

Currently, we have 20 million shares of Series A Preferred Stock outstanding (post Forward Split), all of which contain significant anti-takeover and change of control deterrents. Additionally, our certificate of incorporation authorizes our board of directors to designate any special priority or preference or other rights of, and issue up to 5,000,000 additional shares of “blank check” preferred stock without stockholder approval and to establish the preferences and rights of any preferred stock issued, which would allow the board to issue one or more classes or series of preferred stock that could discourage or delay a tender offer or change in control.

Our bylaws require advance written notice of stockholder proposals and director nominations. Additionally, we are subject to Section 203 of the Delaware General Corporation Law, which, in general, imposes restrictions upon acquirers of 15% or more of our stock. Finally, the board of directors may in the future adopt other protective measures, such as a stockholder rights plan, which could delay, deter or prevent a change of control.

Compliance with Sarbanes-Oxley could be time consuming and costly, which could cause our independent registered public accounting firm to conclude that our internal control over financial reporting is not effective.

As a public company, we are required to document and test our internal control procedures in order to satisfy the requirements of Section 404 of the Sarbanes-Oxley Act, which will require annual management assessments of the effectiveness of our internal control over financial reporting.

During the course of our testing, we may identify deficiencies which we may not be able to remediate in time to meet our deadline for compliance with Section 404. Testing and maintaining internal controls can divert our management’s attention from other matters that are important to our business. We also expect the new regulations to increase our legal and financial compliance cost, make it more difficult to attract and retain qualified officers and members of our Board of Directors (particularly to serve on an audit committee) and make some activities more difficult, time consuming and costly. We may not be able to conclude on an ongoing basis that we have effective internal control over financial reporting in accordance with Section 404.

If we conclude that our internal control over financial reporting is not effective, we cannot be certain as to the timing of completion of our evaluation, testing and remediation actions or their effect on our operations since there is presently no precedent available by which to measure compliance adequacy.

If we are unable to conclude that we have effective internal control over financial reporting then we may not be able to raise capital from certain sources, or list on exchanges or the NASDAQ and investors could lose confidence in our reported financial information, which could have a negative effect on the trading price of our stock. In addition, we may not be able to complete our audits or financial statements in a timely fashion resulting in trading stoppages or delistings from the OTC bulletin Board system, if we are able to re-list.

If we fail to establish and maintain an effective system of internal control, we may not be able to report our financial results accurately or to prevent fraud. Any inability to report and file our financial results accurately and timely could harm our reputation and adversely impact the trading price of our common stock.

It may be time consuming, difficult and costly for us to develop and implement the internal controls and reporting procedures required by the Sarbanes-Oxley Act. We may need to hire additional financial reporting, internal controls and other finance personnel in order to develop and implement appropriate internal controls and reporting procedures. Effective internal control is necessary for us to provide reliable financial reports and prevent fraud. If we cannot provide reliable financial reports or prevent fraud, we may not be able to manage our business as effectively as we would if an effective control environment existed, and our business and reputation with investors may be harmed. In addition, if we are unable to comply with the internal controls requirements of the Sarbanes-Oxley Act, then we may not be able to obtain the independent accountant certifications required by such act, which may preclude us from keeping our filings with the SEC current and may adversely affect any market for, and the liquidity of, our common stock.

Lack of economic review may interfere with investors’ ability to fully assess merits and risks associated with purchase of our stock.

The procurement by prospective investors of an independent review of the investments merits of a proposed subscription for our stock would be costly and can normally be conducted only by those prospective investors whose subscriptions will be of sufficient magnitude that they, either alone or by a pooling of their resources with those of other prospective investors, could afford the expense of such independent analysis, including the retaining of independent consultants. Such a review might or might not prove favorable. Accordingly, subscription to the stock is suitable only for such proposed investors willing and able to accept the risks created by a failure to conduct an independent analysis of this investment.

We do not anticipate paying cash dividends, which could reduce the value of your stock.

We have never paid cash dividends on our common stock and do not anticipate paying cash dividends in the foreseeable future. Even if we do attain revenues and become profitable, we intend on reinvesting profits, if any. The payment of dividends on our common stock will depend on earnings, financial condition and other business and economic factors affecting it at such time as our board of directors may consider relevant. Our common stock may be less valuable because a return on your investment will only occur if our stock price appreciates.

There is limited historical information available for investors to evaluate our performance or a potential investment in our shares.

We are a development stage company with little historical information available to help prospective investors evaluate our performance or an investment in our shares, and our historical financial statements are not necessarily a meaningful guide for evaluating our future performance because we have not begun to manufacture and market our products.

Our common stock does not trade in a mature market and therefore has limited liquidity.

Our common stock trades on the over-the-counter market. The average daily trading volume and prices of our common stock on the over-the-counter market has not been consistent. Our daily volume remains limited with fewer market makers and there is no assurance that increased volume, if any occurs, will continue. Holders of the our common stock may not be able to liquidate their investments in a short time period or at the market prices that currently exist at the time a holder decides to sell. Because of this limited liquidity, it is unlikely that shares of our common stock will be accepted by lenders as collateral for loans.

Public company compliance may make it more difficult for us to attract and retain officers and directors.

The Sarbanes-Oxley Act and new rules subsequently implemented by the SEC have required changes in corporate governance practices of public companies. As a public company, we expect these new rules and regulations to increase our compliance costs and to make certain activities more time consuming and costly. As a public company, we also expect that these new rules and regulations may make it more difficult and expensive for us to obtain director and officer liability insurance in the future and we may be required to accept reduced policy limits and coverage or incur substantially higher costs to obtain the same or similar coverage. As a result, it may be more difficult for us to attract and retain qualified persons to serve on our board of directors or as executive officers.

The Company’s shareholders may face significant regulatory restrictions relating to the sale of their stock, as a result of penny stock and similar rules.

The Company’s stock differs from many stocks in that it is a “penny stock.” The Commission has adopted a number of rules to regulate “penny stocks” including, but not limited to, those rules from the Securities Act as follows:

3a51-1 which defines penny stock as, generally speaking, those securities which are not listed on either NASDAQ or a national securities exchange and are priced under $5, excluding securities of issuers that have net tangible assets greater than $2 million if they have been in operation at least three years, greater than $5 million if in operation less than three years, or average revenue of at least $6 million for the last three years;

15g-1 which outlines transactions by broker/dealers which are exempt from 15g-2 through 15g-6 as those whose commissions from traders are lower than 5% total commissions;

15g-2 which details that brokers must disclose risks of penny stock on Schedule 15G;

15g-3 which details that broker/dealers must disclose quotes and other information relating to the penny stock market;

15g-4 which explains that compensation of broker/dealers must be disclosed;

15g-5 which explains that compensation of persons associated in connection with penny stock sales must be disclosed;

15g-6 which outlines that broker/dealers must send out monthly account statements; and

15g-9 which defines sales practice requirements.

Since the Company’s securities constitute a “penny stock” within the meaning of the rules, the rules would apply to us and our securities. Because these rules provide regulatory burdens upon broker-dealers, they may affect the ability of shareholders to sell their securities in any market that may develop; the rules themselves may limit the market for penny stocks. Additionally, the market among dealers may not be active. Investors in penny stock often are unable to sell stock back to the dealer that sold them the stock. The mark-ups or commissions charged by the broker-dealers may be greater than any profit a seller may make. Because of large dealer spreads, investors may be unable to sell the stock immediately back to the dealer at the same price the dealer sold the stock to the investor. In some cases, the stock may fall quickly in value. Investors may be unable to reap any profit from any sale of the stock, if they can sell it at all. Shareholders should be aware that, according to Commission Release No. 34-29093 dated April 17, 1991, the market for penny stocks has suffered from patterns of fraud and abuse. These patterns include:

control of the market for the security by one or a few broker-dealers that are often related to the promoter or issuer;

manipulation of prices through prearranged matching of purchases and sales and false and misleading press releases;

“boiler room” practices involving high pressure sales tactics and unrealistic price projections by inexperienced sales persons;

excessive and undisclosed bid-ask differentials and markups by selling broker-dealers; and

the wholesale dumping of the same securities by promoters and broker-dealers after prices have been manipulated to a desired level, along with the inevitable collapse of those prices with consequent investor losses.

Risks Related To Our Operations:

Our technologies are unproven and new. No assurance can be made that our technologies will work as anticipated, or, even if they do work, will be commercially accepted.

We are a primarily R&D company with a newly developing and novel manufacturing technology. We do not have agreements with purchasers yet and no assurance can be made that we will be able to make our technology viable. Even if we are able to continue to fund our research and development and make our technologies viable, no assurance can be made that our chips will attain market acceptance in light of the larger, more established competitors in the life sciences industry. If we are unable to raise sufficient capital or commercialize our unproven products, our stock price will decline and you will be adversely affected.

We may suffer the loss of key personnel or may be unable to attract and retain qualified personnel to maintain and expand our business.

Our success is highly dependent on the services of a limited number of skilled scientists. We also depend on the insight and backgrounds of members of our Scientific Advisory Board. As of December 31, 2012, we have no scientists on staff. In addition, our success will depend upon, among other factors, our ability to attract, retain and motivate qualified research and development, engineering and operating personnel, generally and during periods of rapid growth, especially in those areas of our businesses focused on new products and advanced manufacturing processes. There can be no assurance that we will be able to retain existing employees or to attract and retain additional personnel on acceptable terms. The competition for qualified personnel in industrial, academic and nonprofit research sectors is significant.

The loss of the services of any of our key research and development, engineering or operational personnel or senior management without adequate replacement, or the inability to attract new qualified personnel, would have a material adverse effect on our operations.

Some of the processes we require in order to commercialize our products are in short supply which may delay commercialization and hinder our development of products.

As an example, we use a manufacturing process called hot embossing. The machines that do commercial scale hot embossing are in short supply and are very expensive. Therefore, we rely on third party contractors in order to assist us with prototype commercial scale production and will also perhaps rely on these same parties for larger scale production, assuming there is market acceptance. The costs of using these parties may significantly reduce our profit margins, and to the extent we decide to purchase our own equipment to build a manufacturing line, such an effort will not only take time, but will also amount to a significant risk of capital to the Company given our limited resources.

Significant existing or additional governmental regulation could subject us to unanticipated delays and costs, which would adversely affect our revenues.

Our products are still in the development stage. However certain products which we may produce may be subject to government regulation depending upon their ultimate use. The successful implementation of our business strategy depends in part on our ability to get our products into the market as quickly as possible. Additional laws and regulations, or changes to existing laws and regulations, applicable to our business may be enacted or promulgated and the interpretation, application or enforcement of existing laws and regulations may change. We cannot predict the nature of any future laws, regulations, interpretations, applications or enforcements, or the specific effects any of these might have on our business. Any future laws, regulations, interpretations, applications, or enforcements could delay or prevent regulatory approval or clearance of our products and our ability to market our products. Moreover, if we do not comply with existing or future laws or regulations, we could be subject to the following types of enforcement actions by the FDA and other agencies:

Fines;

Injunctions;

Civil penalties;

Recalls or seizures of our products;

Total or partial suspension of the production of our products;

Withdrawal of existing approvals or premarket clearances of our products;

Refusal to approve or clear new applications or notices relating to our products;

Recommendations by the FDA that we not be allowed to enter into government contracts; and

Criminal prosecution.

We rely, in part, on the UC Regents to file and secure our patents.

In addition to the option agreement with the UC Regents, Shrink has entered into a research and development agreement with UC Irvine in order to fund certain research. The agreement provides Shrink with an exclusive first opportunity to negotiate to license any technology that flows (derivative IP). Should any intellectual property flow from this research and development agreement and Shrink elects to exercise such rights, it will be required to make annual payments to the UC Regents as well as royalty payments as commercialization occurs. Disputes with campuses related to the UC Regents (such as UC Merced) could impact our ability to do business with other UC Regents controlled campuses (such as UCI).

Under our research and development agreements we rely on third party laboratories that can experience manufacturing problems or delays, which could result in decreased revenue or increased costs.

All of our research and development agreements require processes that are complex and require specialized and expensive equipment. Replacement parts for this specialized equipment can be expensive and, in some cases, can require lead times of up to a year to acquire. There can be no assurance that our funding commitment under the development agreements will be adequate to fund the equipment requirements. We also rely on numerous third parties to supply production materials and in some cases there may not be alternative sources immediately available, or they may not be available at a reasonable cost.

Shrink has substantial risk in being sued with respect to its intellectual property rights or in having to assert claims against others to protect its rights.

The world of intellectual property rights is very murky and it is often very difficult to determine the specific abilities of a business to use and exploit intellectual property rights. Moreover even to the extent a business has solid rights, there could be substantial costs involved in defending ones rights. Shrink has not completed nor sought any “freedom to operate” opinions from competent intellectual property counsel with respect to its related intellectual property rights and it is reasonable to assume that as the market for Shrink’s products evolves and we produce products for these markets, Shrink will be a target for such lawsuits. Given our limited resources to defend ourselves, this may be, from a corporate perspective, a “life threatening” scenario.

If we are not able to protect our intellectual property and proprietary trade secrets we will not be able to compete effectively and will be adversely affected.

The risks and uncertainties that we face with respect to our patents and other proprietary rights include the following:

the pending patent applications we have filed or to which we have exclusive rights may not result in issued patents or may take longer than we expect to result in issued patents;

the claims of any patents which are issued may not provide meaningful protection;

we may not be able to develop additional proprietary technologies that are patentable; the patents licensed or issued to us or our customers may not provide a competitive advantage;

other parties may challenge patents or patent applications licensed or issued to us or our customers;

patents issued to other companies may harm our ability to do business; and

other companies may design around technologies we have patented, licensed or developed.

We also may not be able to effectively protect our intellectual property rights in some foreign countries.

In order to protect or enforce our patent rights, we may initiate patent litigation against third parties, such as infringement suits or interference proceedings. Litigation may be necessary to:

assert claims of infringement;

enforce our patents;

protect our trade secrets or know-how; or

determine the enforceability, scope and validity of the proprietary rights of others.

Any lawsuits that we initiate could be expensive, take significant time and divert management’s attention from other business concerns. Litigation also puts our patents, if any, at risk of being invalidated or interpreted narrowly and our patent applications at risk of not issuing. Additionally, we may provoke third parties to assert claims against us.

We will be subject to applicable regulatory approval requirements of the foreign countries in which we could sell products, which are costly and may prevent or delay us from marketing our products in those countries.

In addition to regulatory requirements in the United States, we will be subject to the regulatory approval requirements for each foreign country to which could export our products. In the European Union, regulatory compliance requires affixing the “CE” mark to product labeling. Although our new products could be made eligible for CE marking through self-certification, this process can be lengthy and expensive. In Canada, as another example, our new products could require approval by Health Canada prior to commercialization along with International Standards Organization, or ISO, 13485/CMDCAS certification. It generally takes from three to six months from submission to obtain a Canadian Device License. Any changes in foreign approval requirements and processes may cause us to incur additional costs or lengthen review times of our new products, if any. We may not be able to obtain foreign regulatory approvals on a timely basis, if at all, and any failure to do so may cause us to incur additional costs or prevent us from marketing our products in foreign countries, which may have a material adverse effect on our business, financial condition and results of operations.

We may experience difficulties that may delay or prevent our development, introduction or marketing of new or enhanced products.

We intend to continue to invest in product and technology development. The development of new or enhanced products is a complex and uncertain process. We may experience research and development, manufacturing, marketing and other difficulties that could delay or prevent our development, introduction or marketing of new products or enhancements. We cannot be certain that:

any of the products under development will prove to be effective in generating sales demand;

we will be able to obtain, in a timely manner or at all, regulatory approval, if required, to market any of our products that are in development or contemplated;

we are able to find adequate supplies of the necessary component parts for the devices we intend to sell, which is a very challenging risk because we presently do not manufacture anything, relying exclusively on third party company partners and business relationships;

the products we develop can be manufactured at acceptable cost and with appropriate quality; or these products, if and when approved, can be successfully marketed.

The factors listed above, as well as manufacturing or distribution problems, or other factors beyond our control, could delay new product launches. In addition, we cannot assure you that the market will accept these products. Accordingly, there is no assurance that our overall revenue will increase if and when new products are launched.

Intense competition could limit our ability to secure market share which could impair our ability to sell our products and harm our financial performance.

The microfluidics and biochip industries, along with nearly every market we seek to penetrate, are new and underdeveloped markets and industries are rapidly evolving, and developments are expected to continue at a rapid pace. Competition in this industry, which includes competition from professional diagnostic, consumer diagnostic and renewable energy businesses, among others, is intense and expected to increase as new products and technologies become available and new competitors enter the market. Our competitors in the United States and abroad are numerous and include, among others, diagnostic testing, medical products and renewable energy companies, universities and other research institutions.

Our future success depends upon maintaining a competitive position in the development of products and technologies in our areas of focus. Our competitors may:

develop technologies and products that are more effective, less expensive, safer or more readily available than our products or that render our technologies or products obsolete or noncompetitive;

obtain patent protection or other intellectual property rights that would prevent us from developing potential products; or

obtain regulatory approval for the commercialization of our products more rapidly or effectively than we do.

As a result, our products or processes may not compete successfully, and research and development by others may render our products or processes obsolete or uneconomical.

Also, the possibility of patent disputes with competitors holding domestic and/or foreign patent rights may limit or delay expansion possibilities. In addition, many of our existing or potential competitors have or may have substantially greater research and development capabilities, clinical, manufacturing, regulatory and marketing experience and financial and managerial resources, giving them a competitive advantage in the markets in which we hope to operate.

The market for the sale of our products is also highly competitive. This competition is based principally upon price, quality of products, customer service and marketing support. We believe that a number of our competitors are substantially larger than we are and have greater financial resources, and have a more established sales and marketing force already operating in the market, which would give them a competitive advantage over us.

Presuming we are able to commercialize our products, we must then quickly develop ways to efficiently manufacture new and improved products to meet customer demand on a timely and cost-effective basis.

We do not have any manufacturing facilities and have limited relationships with third party manufacturers. We are negotiating with third parties for the development and manufacture of our products initially. However, even if we are able to develop our products, and penetrate the drug and life science industries, we may have to construct or acquire a manufacturing facility or utilize third parties, both of which would require us to train appropriate personnel. To build a manufacturing facility, we will need substantial additional capital and we do not have any capital commitments to fund such construction. In addition, the recent financial crisis has made it extremely difficult to obtain commercial property or industrial financing. In addition, we must be able to resolve in a timely manner manufacturing issues that may arise from time to time as we commence production of our complex products. With a start-up manufacturing facility, unexpected problems may be more frequent as new equipment is put on line and operators are inexperienced in its operation. These and other unanticipated difficulties or delays in manufacturing our products during commercialization, in sufficient quantities to meet customer demand could diminish future demand for our products, cause us to incur greater debt and materially harm our business.

A significant portion of our sales will be dependent upon our customers’ capital spending policies and research and development budgets, and government funding of research and development programs at universities and other organizations, which are subject to significant and unexpected fluctuations.

Our target markets include pharmaceutical and biotechnology companies, academic institutions, government laboratories, and private foundations. Fluctuations in the research and development budgets at these organizations could have a significant effect on the demand for our products and services. Research and development budgets fluctuate due to changes in available resources, mergers of pharmaceutical and biotechnology companies, spending priorities, general economic conditions, and institutional and governmental budgetary policies. Our business could be seriously damaged by any significant decrease in capital equipment purchases or life sciences research and development expenditures by pharmaceutical and biotechnology companies, academic institutions, government laboratories, or private foundations.

The timing and amount of revenues from customers that rely on government funding of research may vary significantly due to factors that can be difficult to forecast. Research funding for life science research has increased more slowly during the past several years compared to the previous years and has declined in some countries, and some grants have been frozen for extended periods of time or otherwise become unavailable to various institutions, sometimes without advance notice. Although the level of research funding increased significantly during the years 1999 through 2003, increases for fiscal 2004 through 2008 were significantly lower. Government funding of research and development is subject to the political process, which is inherently fluid and unpredictable. Other programs, such as homeland security or defense, or general efforts to reduce the federal budget deficit could be viewed by the U.S. government as a higher priority. These budgetary pressures may result in reduced allocations to government agencies that fund research and development activities. Past proposals to reduce budget deficits have included reduced NIH and other research and development allocations. Any shift away from the funding of life sciences research and development or delays surrounding the approval of government budget proposals may seriously damage our business.

Many of our current and potential competitors have longer operating histories, larger customer or user bases, greater brand recognition, greater access to brand name suppliers, and significantly greater financial, marketing and other resources than we do.

Many of these current and potential competitors can devote substantially more resources to the development of their business operations than we can at present. Currently, we do not have a marketing or manufacturing infrastructure in place. In addition, larger, well-established and well-financed entities may acquire, invest in or form joint ventures with other established competitors or with specific product manufacturers, which will allow them pricing advantages due to economies of scale or pursuant to distribution agreements with suppliers. Some large product distributors may also have exclusive distribution agreements or protected territories in which they can sell specific brand name products at a significant discount, or territories in which they may seek to exclude us from selling a specific brand of product. These types of arrangements between our competitors and manufacturers and suppliers may limit our ability to distribute certain products and could adversely affect our revenues.

There can be no assurance that new products we introduce will achieve significant market acceptance or will generate significant revenue.

The market for products in micro-fluidics, bio-sensing and renewable energy industries is characterized by rapid technological advances, evolving standards in technology and frequent new product and service introductions and enhancements. Possible short life cycles for products we sell may necessitate high levels of expenditures for continually selecting new products and discontinuing the sale of obsolete product lines. To obtain a competitive position, we must continue to introduce new products and new versions of existing products that will satisfy increasingly sophisticated customer requirements and achieve market acceptance. Our inability or failure to position and/or price our new or existing products competitively, in response to changes in evolving standards in technology, could have a material adverse effect on our business, results of operations or financial position.

If we deliver products with defects, our credibility may be harmed, market acceptance of our products may decrease and we may be exposed to liability.

The manufacturing and marketing of our products will involve an inherent risk of product liability claims. In addition, our product development is and production will be extremely complex and could expose our products to defects. Any defects could harm our credibility and decrease market acceptance of our products. In the event that we are held liable for a claim for which we are not indemnified or insured that claim could materially damage our business and financial condition. Even if we are indemnified, we may not be able to obtain reimbursement of our damages from the indemnifying party, because for example they do not have sufficient funds or insurance coverage to pay us. If a claim is made for which we have insurance coverage, we cannot be certain that the amount of such coverage will be sufficient, or that we will be able to collect on a claim when we make it.

Because we have not yet begun to sell our products, we have not obtained insurance covering product liability claims or product recall claims against us. When we begin to market our products, such insurance may not be available to us, or not available on terms which we find acceptable. We may determine that the cost of such insurance is too high when compared to the risks of not having coverage and we may determine not to obtain policies insuring such risks, or we may obtain policies with a high deductible.

We could suffer monetary damages, incur substantial costs or be prevented from using technologies important to our products as a result of a legal proceedings being commenced against us.

Because of the nature of our business, we may be subject at any particular time to commercial disputes, consumer product claims, negligence or various other lawsuits arising in the ordinary course of our business, including employment matters, and we expect that this will continue to be the case in the future. Such lawsuits generally seek damages, sometimes in substantial amounts, for commercial or personal injuries allegedly suffered and can include claims for punitive or other special damages. An adverse ruling or rulings in one or more such lawsuits could, individually or in the aggregate, have a material adverse effect on our sales, operations or financial performance. We cannot assure you that any future lawsuits relating to our businesses will not have a material adverse effect on us.

We are currently in a growth stage and may experience setbacks in both business and product development.

We are subject to all of the risks inherent in both the creation of a new business and the development of new and existing products. Our cash flows may be insufficient to meet expenses relating to our operations and the growth of our business, and may be insufficient to allow us to develop new and existing products. We currently so not manufacture or market any product and we cannot be certain that we will ever be able to develop, manufacture, market or sell any product.

We currently do not have adequate insurance coverage for claims against us.

We face the risk of loss resulting from product liability, securities, fiduciary liability, intellectual property, antitrust, contractual, warranty, environmental, fraud and other lawsuits, whether or not such claims are valid. In addition, we do not have adequate or in some cases, any product liability, fiduciary, directors and officers, property, natural catastrophe and comprehensive general liability insurance. To the extent we secure adequate insurance it may not be adequate to cover such claims or may not be available to the extent we expect. If we are able to secure adequate insurance our costs could be volatile and, at any time, can increase given changes in market supply and demand. We may not be able to obtain adequate insurance coverage in the future at acceptable costs. A successful claim that exceeds or is not covered by our policies could require us to pay substantial sums. Even to the extent we are able to acquire adequate insurance, we may not be able to afford to continue coverage through a policy period or in multiple and successive policy periods.

ITEM 1B. UNRESOLVED STAFF COMMENTS

Not Applicable.

ITEM 2. PROPERTIES

The Company’s corporate office is located at 7020 Belcrest Drive Plano Texas 75024. It is the office of our CEO and is used by the Company at no cost.

ITEM 3. LEGAL PROCEEDINGS

We are not aware of any legal proceedings or investigations involving the Company.

From time to time, we may become involved in lawsuits and legal proceedings which arise in the ordinary course of business, in particular, that may relate to defense of our intellectual property rights. However, litigation is subject to inherent uncertainties, and an adverse result in these or other matters may arise from time to time that may harm our business. We are currently not aware of any such legal proceedings or claims that we believe will have a material adverse effect on our business, financial condition or operating results.

ITEM 4. MINE SAFETY DISCLOSURES

None.

PART II

Market Information

Our common stock is quoted under the symbol “INKN” on the OTC Markets system. Our shares trade on a limited and sporadic basis and the trading price of our shares is not necessarily of the existence of a trading market for our securities or indicative of our value. The following table sets forth, for the periods indicated, the high and low closing prices of our common stock. These prices reflect inter-dealer prices, without retail mark-up, mark-down or commission as adjusted to reflect the Forward Split, and may not represent actual transactions


		Closing Prices ⁽¹ ⁾
		High		Low
*Year Ended December 31, 2012*
4^th Quarter	$	0.0044	$	0.0011
3^rd Quarter	$	0.0054	$	0.0011
2^nd Quarter	$	0.0055	$	0.0025
1^st Quarter	$	0.0017	$	0.0055

*Year Ended December 31, 2011*
4^th Quarter	$	0.0399	$	0.0006
3^rd Quarter	$	0.079	$	0.03
2^nd Quarter	$	0.10	$	0.05
1^st Quarter	$	0.131	$	0.07

⁽¹⁾

The above table sets forth the range of high and low closing prices per share of our common stock as reported by www.nasdaq.com for the periods indicated, as adjusted for the Forward Split in April 2010.

Recently our stock has not been quoted on the OTC Bulletin Board, and is now being quoted by the OTC Market Group and on the Pink Sheets. Our stock is no longer trading on the OTC Bulletin Board because the market maker that had filed originally to quote our stock on the OTC Bulletin Board is no longer providing quotes on the OTC Bulletin Board. A large number of initiating market makers have ceased to provide quotes on the OTC Bulletin Board causing many companies to cease having quotations on the OTC Bulletin Board during 2011 and 2012.

The Company’s transfer agent is Action Stock Transfer, located at 2469 E. Fort Union Blvd., Suite 214, Salt Lake City, UT 84121, (801) 274-1088 (www.actionstocktransfer.com).

Approximate Number of Holders of Our Common Stock

As of January 15, 2013, there were ___ holders of record of our common stock. This number excludes the shares of our common stock owned by stockholders holding stock under nominee security position listings. In aggregate, we had 224,746,249 shares of common stock outstanding as of January 15, 2013.

Dividends

We have never declared or paid a cash dividend and do not foresee paying one in the near future, except to the extent our shareholders subsequently approve of and the Board of Directors then authorizes, Any future decisions regarding dividends will be made by our board of directors. We currently intend to retain and use any future earnings for the development and expansion of our business and do not anticipate paying any cash dividends in the foreseeable future. Our board of directors has complete discretion on whether to pay dividends, subject to the approval of our stockholders. Even if our board of directors decides to pay dividends, the form, frequency and amount will depend upon our future operations and earnings, capital requirements and surplus, general financial condition, contractual restrictions and other factors that the board of directors may deem relevant.

Securities Authorized for Issuance Under Equity Compensation Plans

We have 750,000 shares and no options outstanding under our 2010 Stock Incentive Plan (the “2010 Plan”), which was adopted by the Board in December 2010 and was approved by stockholders. The 2010 Plan is the Company’s only equity compensation plan currently in effect. Under the 2010 Plan, 25,000,000 shares were authorized for issuance pursuant to awards made under the plan with 24,250,000 shares remaining available for issuance. Options granted under the 2010 Plan are exercisable at prices at least equal to the fair market value of such stock on the dates the options were granted. Options expire ten years after the date of grant.

The following is a summary of the securities issued and authorized for issuance under the 2010 Plan at December 31, 2012:


Plan Category	(a) Number of securities to be issued upon exercise of outstanding options, warrants and rights	(b) Weighted-average exercise price of outstanding options, warrants and rights	(c) Number of securities remaining available for future issuance under equity compensation plans (excluding securities reflected in column (a)
Equity compensation plans approved by security holders	—	—	—
Equity compensation plans not approved by security holders (1)	750,000		24,250,000
Total

(1) Includes the 2010 Plan, which has not yet been approved by stockholders. In addition, the Company has issued and may continue to issue share- and/or option -based compensation on occasion outside of any plan. To date only 750,000 options have been issued under this plan.

Recent Sales of Unregistered Securities

In January 2011, pursuant our 2010 Plan, the Company issued 750,000 shares valued at $95,625 to Heiner Dreismann, a member of our Board of Directors, for services rendered and as an incentive to remain on the board with the Company. As a result of the Mr. Dreismann’s issuance there are 24,250,000 remaining shares authorized for issuance pursuant to the 2010 Plan. These shares were registered for resale pursuant to a registration statement on Form S-8.

In January 2011, the Company received conversion demand notices for convertible notes with total principal balances of $475,000 and accrued interest of $52,771. The notes and their accrued interest were converted at $0.10 per share (5,277,714 shares of common stock), and pursuant to the stock issuance considered paid in full.

In January 2011, the Company issued a 14% convertible note with a principal balance of $60,000 in exchange for $60,000. The note is convertible at $0.17 per share. The note matures on October 1, 2012.

In February 2011, the Company issued 140,000 shares valued at $16,330 for payment of professional services provided during the year ended December 31, 2010 and thru February 2011.

At the time of the BlackBox acquisition, the Company issued 14,000,000 shares of common stock accordingly.

In March 2011, the Company received $70,000 in cash from a private investor. In exchange, the Company agreed to issue 411,765 shares of common stock.

In January 2012, pursuant our 2010 Plan, the Company issued 7,352,941 shares valued at $29,412 for payment of professional services provided by our attorney during January and February 2012.

The Company reasonably believes that all of the issuances of securities described above were deemed to be exempt from registration in reliance on Section 4(2) of the Securities Act as transactions by an issuer not involving a public offering. Each investor had a pre-existing relationship with the Company, represented that it had the financial wherewithal, knowledge and sophistication to invest in the securities of the Company and only legend restricted securities were issued. In addition, each recipient represented that they are acquiring the securities as an investment only and not with a view towards distribution of the same to the public. We made available to each investor with disclosure of all aspects of our business, including providing the investor with press releases, access to our auditors, and other financial, business, and corporate information. Finally, all securities issued were either restricted with an appropriate restrictive legend on certificates for shares, notes and warrants issued stating that the securities (and underlying shares) have not been registered under the Securities Act and cannot be sold or otherwise transferred without an effective registration or an exemption therefrom, or were issued pursuant to an exemption provided under Rule 144.

Purchases of Equity Securities

No repurchases of our common stock were made during the fourth quarter 2012 and as of the date of this report.

ITEM 6. SELECTED FINANCIAL DATA.

Not Applicable.

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

This report on Form 10-K contains forward-looking statements within the meaning of Rule 175 of the Securities Act of 1933, as amended, and Rule 3b-6 of the Securities Act of 1934, as amended, that involve substantial risks and uncertainties. These forward-looking statements are not historical facts, but rather are based on current expectations, estimates and projections about our industry, our beliefs and our assumptions. Words such as “anticipate”, “expects”, “intends”, “plans”, “believes”, “seeks” and “estimates” and variations of these words and similar expressions are intended to identify forward-looking statements. These statements are not guarantees of future performance and are subject to risks, uncertainties and other factors, some of which are beyond our control and difficult to predict and could cause actual results to differ materially from those expressed or forecasted in the forward-looking statements. You should not place undue reliance on these forward-looking statements, which apply only as of the date of this Form 10-K. Investors should carefully consider all of such risks before making an investment decision with respect to the Company’s stock. The following discussion and analysis should be read in conjunction with our consolidated financial statements and summary of selected financial data for Shrink NanoTechnologies, Inc. Such discussion represents only the best present assessment from our Management.

The following discussion and analysis should be read in conjunction with our unaudited financial statements and related notes included in this Report and the “Forward Looking Statements” section in the forepart of this Report (see page 1 above) and the “Risk Factors” set forth in Item 1A of this Report, as may be amended or updated from time to time. The statements contained in this Report that are not historic in nature, particularly those that utilize terminology such as “may,” “will,” “should,” “expects,” “anticipates,” “estimates,” “believes,” or “plans” or comparable terminology are forward-looking statements based on current expectations and assumptions. No assurance can be made that any of our forward looking statements will materialize as planned.

Various risks and uncertainties could cause actual results to differ materially from those expressed in forward-looking statements. For ease of reference we use certain defined terms as defined in “Use of Terms” on page 3 above, in the forepart of this Report.

Background

General

The Company has undergone, and continues to undergo, marked and sometimes volatile operational changes as we attempt to transition towards commercialization efforts and liquidate undesired assets.

Our business currently consists of four units: Cell Culturing Products ; Microfluidic Systems and Kits ; Special Substrates ; and Internal Development and Acquisitions .

Business Focus

Assets; Intellectual Property and Research Agreements

Our assets include exclusive and non-exclusive patent rights, as more fully described in this Report and in our Annual Report, from agreements with third parties, as follows:

The Company has dissolved its Shrink Solar, LLC entity which had no revenues or assets.

The material terms of the Share Exchange were:

Discussion of Business Strategy; Short Term Goals

Although management constantly monitors market trends, as well as available capital and has in the past, and continues to, refine and re-prioritize the Company’s goals, so as to attain commercialization as quickly as possible, the goals we will need to attain for our various businesses are currently: (1) commercialization of existing and newer commercial versions of StemDisc® , Cell Align® and NanoShrink® products; (2) entering into a joint development agreement to commercialize the Corning microfluidic system; (3) joint development of certain materials from our Special Substrates business unit; and (4) entering into technologically accretive and synergistic acquisitions.

In addition to our licensed technologies, we may develop technologies on our own as a result of our research or joint development activities.

Sponsored Research Agreements with UCI

Sponsored Research Agreement with UC Regents (September 2010)

To date the Company has paid $5,000, and at September 30, 2011 owes $12,598 under this agreement. No assurance can be made that the Company will attain the funding necessary to fulfill its funding obligations under the SRA or, that the research performed will necessarily produce commercially viable new inventions. In addition, in the event that discoveries are made, no assurance can be made that the Company will be able to fund commercialization of these technologies or that it will exercise its right to an exclusive license of these products.

Sponsored Research Agreement with UC Regents (May 2010)

Obligations under Biosensing Research Agreement

We are also required to indemnify UC Regents and certain affiliates from losses and claims stemming from the agreement.

Results of UCI Biosensing Research To Date

To date, the Biosensing Research Agreement has led to two patent applications being filed with the USPTO.

License Agreement with University of Chicago - Sold

Effective June 3, 2011, following the Share Exchange involving our BlackBox Subsidiary the License Agreement with the University of Chicago is no longer a part of our operations and business focus.

Agreements Terminated in 2010

During 2010 the Company terminated certain agreements for economic reasons and because alternative resources were available. These terminated agreements include:

Proceeds of Debt Financing

Private Placement of 12% Convertible Notes and Series B Warrants

The foregoing are the material terms of the 12% note and Series B Warrant financing.

2009 Private Placement of 12% Convertible Notes and Series A Warrants;

When combined with notes and warrants sold during late fiscal 2009 (and not including any 14% convertible notes issued to Noctua Fund, LP) the following (and not including any 14% convertible notes issued to Noctua Fund, LP) is a brief summary of the notes and warrants outstanding:

Shrink Nanotechnologies, Inc. 10-K