UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

☑ ANNUAL REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended March 31, ~~2025~~ 2026

☐ TRANSITION REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ____________ to ____________

Commission file number 1-1373

MODINE MANUFACTURING COMPANY

(Exact name of registrant as specified in its charter)


Wisconsin		39-0482000
(State or other jurisdiction of incorporation or organization)		(I.R.S. Employer Identification No.)

1500 DeKoven Avenue, Racine, Wisconsin		53403
(Address of principal executive offices)		(Zip Code)

Registrant’s telephone number, including area code (262) 636-1200

Securities registered pursuant to Section 12(b) of the Act:

Title of each class		Trading Symbol(s)		Name of each exchange on which registered
Common Stock, $0.625 par value		MOD		New York Stock Exchange

Securities Registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes þ No ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.

Yes ☐ No þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes þ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).

Yes þ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.


Large Accelerated Filer þ		Accelerated Filer ☐

Non-accelerated Filer ☐		Smaller reporting company ☐

		Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☑

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).

Yes ☐ No þ

Approximately 8899 percent of the outstanding shares are held by non-affiliates. The aggregate market value of these shares was approximately $67.1239 billion based upon the market price of $~~132~~142.7916 per share on September 30, ~~2024~~2025, the last business day of our most recently completed second fiscal quarter. Shares of common stock held by each executive officer and director and by each person known to beneficially own more than 10 percent of the outstanding common stock have been excluded in that such persons may be deemed to be affiliates. The determination of affiliate status is not necessarily a conclusive determination for other purposes.

The number of shares outstanding of the registrant’s common stock, $0.625 par value, was 52,~~391~~815,~~883~~785 at May 1622, ~~2025~~2026.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the following documents are incorporated by reference into the parts of this Form 10-K designated to the right of the document listed.

Incorporated Document		Location in Form 10-K

Proxy Statement for the 2025 Annual		Part III of Form 10-K
Proxy Statement for the 2026 Annual		Part III of Form 10-K
Meeting of Shareholders		(Items 10, 11, 12, 13, 14)

Table of Contents

MODINE MANUFACTURING COMPANY

TABLE OF CONTENTS

PART I
	ITEM 1. BUSINESS.	1
	ITEM 1A. RISK FACTORS.	13
	ITEM 1B. UNRESOLVED STAFF COMMENTS.	2224
	ITEM 1C. CYBERSECURITY.	2325
	ITEM 2. PROPERTIES.	2426
	ITEM 3. LEGAL PROCEEDINGS.	2426
	ITEM 4. MINE SAFETY DISCLOSURES.	2426
	INFORMATION ABOUT OUR EXECUTIVE OFFICERS.	2527
PART II
	ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.	2628
	ITEM 6. RESERVED	2729
	ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.	2830
	ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.	4548
	ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.	4851
	ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.	9397
	ITEM 9A. CONTROLS AND PROCEDURES.	9397
	ITEM 9B. OTHER INFORMATION.	9497
	ITEM 9C. DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS.	9498
PART III
	ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE.	9598
	ITEM 11. EXECUTIVE COMPENSATION.	9699
	ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.	9699
	ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE.	96100
	ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES.	97100
PART IV
	ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES.	97100
	ITEM 16. FORM 10-K SUMMARY.	97100
	SCHEDULE II - VALUATION AND QUALIFYING ACCOUNTS	98101
	EXHIBIT INDEX	99102
	SIGNATURES	~~103~~107

Table of Contents

(This page intentionally left blank.)

Table of Contents

PART I

ITEM 1. BUSINESS.

At Modine Manufacturing Company, we are Engineering a Cleaner, Healthier World ™. For more than 100 years, we have been a trusted leader in designing, engineering, testing, and manufacturing mission-critical thermal solutions. Our technologies heat, cool, and ventilate, with systems that drive performance, efficiency, and reliability for our customers. Our technologies support our mission to improve indoor air quality, lower harmful emissions, enable cleaner running vehicles, and use environmentally friendly refrigerants. We help customers across industries solve complex thermal management challenges and meet increasingly stringent indoor and outdoor air, energy, and water standards.

We sell customer-centric thermal management solutions in a wide array of commercial, industrial, and building heating, ventilating, air conditioning, and refrigeration (“HVAC&R”) markets. In addition, we are a leading provider of engineered heat transfer systems and high-quality heat transfer components for use in on- and off-highway original equipment manufacturer (“OEM”) vehicular applications. Our primary customers across the globe include:

Developers and operators of data centers;

- Healthcare facility operators and K-12 school systems;

Heating, ventilation and cooling OEMs;

Construction architects and contractors;

Wholesalers of heating equipment;

Agricultural, industrial and construction equipment OEMs;

Commercial and industrial equipment OEMs; and

Truck, bus, automobile and specialty vehicle OEMs.

We partner with our customers to provide solutions including systems, services, and components to solve complex heat transfer challenges and are committed to helping them reach their sustainability goals. We focus on product design, from raw materials to end-of-life recyclability, to optimize the total cost of ownership and reduce negative environmental impacts across the product life cycle. We anticipate and prepare for change in order to be at the forefront of technological advances and to provide innovative solutions to help our customers meet their sustainability targets and comply with an increasingly stringent regulatory environment.

History

Modine was incorporated under the laws of the State of Wisconsin on June 23, 1916 by its founder, Arthur B. Modine. A.B. Modine’s “Turbotube” radiators became standard equipment on the famous Ford Motor Company Model T. In response to frigid Wisconsin winter temperatures and inadequate heating options in the market, A.B. Modine combined a radiator, a fan and steam pipes to construct the first unit heater, marking the start of our heating business. When he died at the age of 95, A.B. Modine had personally been granted more than 120 U.S. patents for his heat transfer innovations. The standard of innovation exemplified by A.B. Modine remains the cornerstone of Modine today.

Our heritage provides a depth and breadth of expertise in thermal management, which, when combined with our global manufacturing presence, standardized processes, and state-of-the-art technical resources, enables us to rapidly bring highly-valued, customized solutions to our customers.

Terms and Year References

When we use the terms “Modine,” “we,” “us,” the “Company,” or “our” in this report, unless the context otherwise requires, we are referring to Modine Manufacturing Company. Our fiscal year ends on March 31 and, accordingly, all references to a particular year mean the fiscal year ended March 31 of that year, unless indicated otherwise.

Table of Contents

Business Strategy and Results

Our purpose of Engineering a Cleaner, Healthier World™ guides our strategic direction. Our mission is to use our thermal management expertise to help our customers improve indoor air quality, reduce energy and water consumption, lower harmful emissions, enable cleaner running vehicles, and use more environmentally friendly refrigerants. We are committed to evolving our product portfolio in pursuit of highly engineered, mission-critical thermal solutions. We are strategically investing in end markets where we see the highest growth prospects. These markets continue to shift to low-carbon energy solutions, driving demand for cleaner, more efficient thermal management.

We first announced our vision for a “new” Modine in late fiscal 2021. Over the last ~~four~~five fiscal years, we have simplified and re-segmented our organization and have aligned resources around specific strategies and market-based verticals. Our leadership and teams have embraced 80/20 principles, which focus on the rule that 80 percent of outputs result from 20 percent of inputs. Our teams have created a high-performance culture that focuses resources on products and markets with the highest sustainable growth opportunities and best return profiles, while simplifying and improving our processes. ~~Through our application of 80/20 principles, we have achieved transformative change and significant improvements in our businesses and our financial results — and we are not done yet.~~

~~During~~Following our 80/20 discipline during fiscal ~~2025~~2026, we significantly expanded our ~~consolidated~~Data ~~net~~Centers ~~sales~~business ~~were~~and ~~$2.6~~production ~~billion,~~capacity aand ~~7 percent~~are ~~increase~~continuing ~~from~~to ~~$2.4~~grow ~~billion~~this inbusiness ~~fiscal~~to ~~2024, primarily~~meet ~~driven~~increasing bycustomer ~~higher~~demand. We ~~sales~~see great opportunity in growing our ~~Climate~~Data ~~Solutions~~Centers ~~segment,~~business ~~partially~~in ~~offset~~light byof ~~lower~~trends ~~sales~~ in ~~our~~high-performance ~~Performance~~computing, ~~Technologies~~with ~~segment. The~~significant ~~higher~~data ~~Climate~~center ~~Solutions~~growth ~~segment~~fueled ~~sales~~by ~~included~~artificial ~~significant~~intelligence ~~sales~~(“AI”), ~~growth~~resulting toin a commensurate need for data center ~~customers~~cooling solutions. In addition, ~~both~~we ~~incremental~~acquired ~~sales~~three ~~from~~businesses ~~the~~during ~~Scott~~fiscal ~~Springfield~~2026, ~~Mfg.~~AbsolutAire, Inc. (“~~Scott Springfield Manufacturing~~AbsolutAire”) ~~business~~, aLBW ~~leading~~Holding ~~manufacturer~~Corp. of(“L.B. ~~air~~White”), ~~handling~~and ~~units~~Climate ~~serving~~by ~~the~~Design ~~data~~International ~~center~~(“Climate ~~cooling~~by ~~and~~Design”), ~~indoor~~which ~~air~~contributed ~~quality~~to ~~markets~~growth in ~~the~~our ~~U.S.~~HVAC ~~and~~Technologies ~~Canada~~business. In ~~that~~January 2026, we ~~acquired~~entered ininto ~~March~~definitive ~~2024~~agreements with Gentherm Incorporated (“Gentherm”), whereby we will spin-off and ~~organic~~simultaneously ~~growth. The~~combine ~~lower~~our Performance Technologies segment ~~sales~~businesses ~~included~~with Gentherm in a ~~$54~~Reverse ~~million~~Morris ~~impact~~Trust ~~from~~transaction. Gentherm, ~~the~~a ~~disposition~~Michigan-based ofcorporation, ~~three~~is ~~automotive~~a ~~businesses~~global inleader ~~Germany~~of ~~during~~innovative ~~the~~thermal ~~third~~management ~~quarter~~and ofpneumatic ~~fiscal~~comfort ~~2024~~technologies. ~~Our~~This ~~operating~~transaction, ~~income~~which we expect will close by the end of ~~$283~~calendar ~~million~~2026, inwill ~~fiscal~~transform ~~2025~~our ~~increased~~company ~~$42~~into ~~million~~a ~~from~~pure-play climate solutions company focused on the ~~prior year,~~data ~~primarily~~center ~~due~~and tocommercial ~~higher~~HVAC&R ~~gross~~markets. Through ~~profit~~our application of 80/20 principles, we are achieving transformative change.

AsDuring wefiscal ~~head~~2026, ~~into~~our consolidated net sales were $3.2 billion, a 23 percent increase from $2.6 billion in fiscal ~~2026~~2025, primarily wedriven ~~are~~by ~~committed~~higher tosales in our ~~strategic~~Climate ~~pillars~~Solutions segment. The higher Climate Solutions segment sales included significant sales growth to ~~drive~~hyperscale ~~value~~and ~~creation~~colocation data center customers and $119 million of incremental sales from businesses we acquired during fiscal 2026. Our operating income of $342 million in fiscal 2026 increased $59 million from the prior year, asprimarily ~~follows:~~due to higher gross profit.

In fiscal 2027, we are committed to executing on our strategic priorities, including further expanding our Data Centers business and completing the transaction with Gentherm. We will continue to apply our strategic pillars to drive value creation, as follows:

●

Capitalizing on our deep expertise in thermal management, including world-class capabilities and proprietary technologies, to deliver differentiated solutions to our customers and sustain market leadership.

●

Leveraging our portfolio of highly engineered, mission-critical thermal solutions to accelerate growth.

● Focusing on opportunities fueled by multiple secular mega-trends, directly tied to our mission. For example, we are rapidly expanding our Data Center Cooling business in response to trends in high-performance computing, with significant data center growth fueled by artificial intelligence, resulting in a commensurate need for data center cooling solutions.

●

Elevating our 80/20 discipline, influencing our daily decision making and strategic resource and capital allocation. We will continue to foster an entrepreneurial spirit in our businesses and customer-centric innovation to build and sustain long-term customer relationships.

●

Evolving our portfolio to compound shareholder value, focusing on high-growth, high margin businesses for sustainable growth and returns.

Table of Contents

Customers and Product Groups

We partner with our customers across multiple industries to provide sustainable solutions for a wide range of applications. Our top five customers, in terms of sales, are in the data center, commercial vehicle, and off-highway markets and our ten largest customers accounted for 4349 percent of our net sales in fiscal ~~2025~~2026.

The following is a summary of our primary product groups, categorized as a percentage of our net sales:


	Fiscal ~~2025~~2026		Fiscal ~~2024~~2025
Data center cooling	25	%	12	%
Data Centers	35	%	25	%
Heat transfer	16	%	20	%
Heat Transfer Solutions	18	%	21	%
HVAC&R	15	%	14	%
HVAC Technologies	11	%	10	%
Air-cooled	23	%	28	%
On-Highway Applications	23	%	28	%
Liquid-cooled	16	%	21	%
Heavy-Duty Equipment	13	%	16	%
Advanced solutions	5	%	5	%

Competitive Position

We compete with many manufacturers of heat transfer and HVAC&R solutions, some of which are divisions of larger companies. The markets for our products continue to be very dynamic. For example, our data center customers are expanding globally ~~and are requiring new technologies~~, driving us to invest in geographic and capacity expansion ~~and~~ to ~~expand our product portfolio to~~ meet their needs. ~~The~~Additionally, ~~expansion of electric vehicle demand has also created opportunities to work with~~ our ~~existing~~global ~~OEM~~power generation customers, asare ~~well~~looking asfor ~~emergent~~new ~~customers~~technologies ~~focused~~and onglobal ~~zero-emission~~manufacturing ~~products. Additionally,~~capacity ~~our~~to ~~global~~meet ~~power~~their ~~generation~~growth ~~customers~~demands, driven by new data center construction and demand for backup power for ~~critical~~these ~~infrastructure~~data centers, ~~such~~as well as for hospitals, mining and airports~~, are looking for new technologies and global manufacturing capacity to meet their growth demands~~. Our HVAC&R OEM customers are faced with significant international competition and maintain global manufacturing footprints to compete in local markets. In addition, consolidation within the supply base and vertical integration may introduce new or restructured competitors to our markets. We are investing in geographic and capacity expansion to meet these customer needs, particularly as we experience competition from ~~suppliers~~companies positioned in different geographies that enjoy economic advantages such as lower labor costs and tax rates. Many of our customers also continue to ask us, as well as their other primary suppliers, to provide research and development (“R&D”), design, and validation support for new potential projects. This combined work effort often results in stronger customer relationships and more partnership opportunities for us.

Business Segments

Our chief operating decision maker (“CODM”), our President and Chief Executive Officer, reviews the separate financial results for each of our operating segments. The CODM utilizes the financial results to evaluate the performance of each business segment and in making decisions on the allocation of resources. See Note 22 of the Notes to Consolidated Financial Statements for segment financial information.

Effective April 1, 2026, we reorganized our Climate Solutions segment and split it into two separate operating segments: 1) Data Centers and 2) Commercial HVAC. We believe that managing these businesses independently will allow us to better deploy our 80/20 strategy focused on capitalizing on growth opportunities, particularly in our Data Centers business, and optimizing profit margins and cash flow. As a result of this organizational change, we will report three operating segments in fiscal 2027: 1) Data Centers; 2) Commercial HVAC and 3) Performance Technologies.

Climate Solutions Segment

The Climate Solutions segment provides energy-efficient, climate-controlled solutions and components. The Climate Solutions segment provides cooling solutions for data centers that help save water and energy through intelligent controls. The Climate Solutions segment also provides heat exchangers for HVAC&R applications and anti-corrosive coatings. In addition, the segment ~~also~~ provides HVAC&R systems and solutions for commercial, education, industrial, and residential applications.

The Climate Solutions segment has strategically aligned its teams around three primary market-based verticals: i) Data ~~Center Cooling~~Centers; ii) Heat Transfer ~~Products~~Solutions and iii) HVAC&R Technologies.

Table of Contents

Data ~~Center Cooling~~Centers

The Data ~~Center~~Centers ~~Cooling~~ business provides ~~sustainable~~innovative ~~cooling~~thermal management solutions for data center ~~markets~~customers in North America, Europe, the Middle East and Africa (“EMEA”), and Asia, ~~including~~Pacific. This ~~complete~~business ~~system~~serves ~~design~~data center management customers, ~~controls~~including Hyperscale, ~~maintenance~~Colocation, NeoCloud and ~~monitoring~~Edge customers. WeOur ~~provide~~ data center cooling solutions ~~that~~ feature low global warming potential refrigerants, free cooling technology, and lower water consumption products, enabling our customers and end-users to meet their environmental and sustainability goals. Data center products ~~consist~~include ofchillers, ITdry ~~cooling solutions~~coolers, ~~including~~ precision air ~~conditioning~~handling units, ~~for data center applications;~~ computer room air conditioning (“CRAC”), ~~and~~ computer room air handler (“CRAH”) units;, ~~hybrid~~ fan ~~coils; fan~~ walls;, ~~chillers; condensers; condensing units; and liquid cooling solutions for high~~rear-~~density~~door ~~computing~~heat exchangers, ~~including~~ coolant distribution units (“CDU”) and immersion solutions. In addition, the Data ~~Center~~Centers ~~Cooling~~ business sells modular data center solutions, replacement parts, maintenance service and control solutions for ~~existing equipment and new~~ building management controls and systems. This business serves data center management customers, including large colocation, cloud service providers and hyperscale customers, as well as customers in the commercial and industrial sectors such as telecommunications, healthcare and commercial real estate.

In fiscal 2025, the data center cooling markets that we serve experienced a year of exceptionally strong growth. We expect strong growth in these markets in fiscal 2026, supported by an increasing reliance on digital technologies, specifically colocation and cloud usage. Market demand for data usage and storage continues to rise, driven by the increased use of ~~IoT~~AI ~~(Internet~~and ofmachine ~~Things)~~learning ~~technology,~~in ~~which~~a ~~connects~~wide ~~various~~variety ~~devices~~of ~~through~~applications ~~the internet, artificial intelligence~~ and ~~machine~~end ~~learning, smart phones, and digital transformation trends~~markets. In addition, ~~artificial intelligence~~AI, machine learning, and other trends are driving increased high performance computing, which increases heat loads and the need for high-density cooling solutions, such as hybrid and liquid cooling. Digital transformation trends driving market demand include an increased focus on the digital customer experience, as more transactions and customer interactions are taking place virtually through websites and mobile applications. Furthermore, ~~and~~ the ~~increasing~~ use of 5G technology ~~and~~to ~~its~~enable ~~application~~a ~~across~~wide ~~global~~range ~~enterprise~~of ~~opportunities~~applications worldwide is increasing, particularly in the healthcare, manufacturing, and energy sectors.

~~Heat~~In ~~Transfer~~fiscal ~~Products~~2026, the data center cooling markets that we serve experienced another year of exceptionally strong growth. We expect strong growth in these markets in fiscal 2027, supported by sustained global reliance on digital technologies including hyperscale platforms, NeoCloud and AI-focused cloud providers, colocation services, edge infrastructure, and rapidly expanding AI computing workloads. In North America, we expect the data center markets will experience strong growth, benefitting from significant capital investments in data center infrastructure in the U.S. by both Hyperscale and NeoCloud data center providers. In EMEA, we anticipate moderate growth, as we expect the growth drivers discussed above may be somewhat tempered by power and land availability, along with stricter sustainability regulations in Europe. In Asia, we anticipate the data center markets will experience strong growth in fiscal 2027, driven by AI and high-performance computing demand.

~~The~~ Heat Transfer Products business provides heat exchanger coils, primarily of round tube plate fin construction, to the HVAC&R markets in North America, Europe, and Asia. In addition, our Heat Transfer Products business provides coatings products and application services to the HVAC&R markets in North America and Europe. Our coatings products are designed to extend the life of equipment and components by protecting against corrosion and foreign matter. Customers for these products and services include manufacturers of commercial, industrial and residential HVAC&R equipment and systems, and distributors, contractors, and end users in a variety of applications, including commercial and residential HVAC, mobile air conditioning, refrigeration, data center management, and precision and industrial cooling.Solutions

InThe ~~fiscal~~Heat ~~2025,~~Transfer ~~the~~Solutions ~~HVAC&R~~business ~~markets~~provides ~~to which we sell~~ heat exchanger coils ~~experienced declines. The most significant decline was in the European heat pump market~~, ~~resulting~~anti-corrosion ~~from~~coating ~~the delay in the adoption of heat pump technology. Looking ahead~~products, ~~we expect the~~ commercial and ~~residential~~industrial ~~markets~~refrigeration ~~that~~products ~~we serve will be relatively flat during fiscal 2026. Trends influencing our primary markets include refrigerant substitution~~ and ~~energy~~power ~~efficiency~~generation ~~requirements, both of which are expected to benefit the commercial HVAC&R markets. Demand for more efficient HVAC&R systems in buildings~~ and ~~processes~~transmission iscooling ~~driven by more stringent energy efficiency regulations~~solutions. In ~~addition, demand continues to be strong for corrosion resistant coatings, specifically for HVAC applications in coastal areas and other harsh environments.~~

Heat exchanger coils, primarily of round tube plate fin construction, are primarily sold to the HVAC&R and data center cooling markets in North America, Europe, and Asia. Customers include commercial and industrial equipment manufacturers, distributors, contractors, and end users in a variety of commercial and industrial applications, including data center management, commercial and residential HVAC, mobile air conditioning, refrigeration, and precision and industrial cooling. In fiscal 2026, the HVAC&R markets experienced moderate growth, recovering from market declines in fiscal 2025. The data center markets experienced exceptionally strong growth in fiscal 2026 and we expect strong growth during fiscal 2027, supported by the sustained global reliance on digital technologies. We expect the commercial and residential markets that we serve will be relatively flat during fiscal 2027. Trends influencing our primary HVAC&R markets include refrigerant substitution and energy efficiency requirements, both of which are expected to benefit the commercial HVAC&R markets. Demand for more efficient HVAC&R systems is driven by more stringent energy efficiency regulations.

~~The~~Anti-corrosion coatings products and application services are primarily sold in the HVAC&R ~~business~~markets ~~provides~~in aNorth ~~wide~~America ~~array~~and ofEurope. Our ~~solutions~~coatings products are designed to ~~heating;~~extend ~~indoor~~the ~~air~~life ~~quality;~~of ~~commercial~~equipment and ~~industrial~~components ~~refrigeration;~~by protecting against corrosion and ~~industrial~~foreign ~~power~~matter. Customers ~~generation~~for these products and services include manufacturers of commercial, ~~conversion~~industrial and residential HVAC&R equipment and systems, and ~~transmission;~~distributors, contractors, and ~~industrial~~end ~~process~~users ~~markets~~of HVAC&R equipment. Data center growth, in ~~North~~particular, ~~America~~is increasing market demand for coatings. In addition, ~~EMEA~~demand for other HVAC applications, particularly in coastal areas and ~~China~~other harsh environments, remains strong.

Table of Contents

~~Heating~~Refrigeration products, primarily sold to the ~~North~~commercial ~~American residential~~ and ~~commercial~~industrial ~~heating~~refrigeration markets, ~~include~~in ~~unit heaters (gas-fired~~EMEA, ~~hydronic~~China, ~~electric~~ and ~~oil-fired);~~North ~~roof-mounted~~America, ~~direct-~~include ~~and~~evaporator ~~indirect-fired~~unit ~~makeup~~coolers, ~~air~~remote ~~units;~~condensers, ~~duct~~fluid ~~furnaces~~coolers, ~~(indoor~~gas coolers, and ~~outdoor);~~dry ~~infrared~~and ~~units~~brine ~~(high-~~coolers. Customers ~~and~~for ~~low-intensity);~~these coolers and ~~perimeter~~refrigeration ~~heating~~ products ~~(cabinet~~primarily ~~unit~~include ~~heaters~~wholesalers, distributors and ~~convectors). The~~resellers, ~~primary~~commercial ~~customers~~and ~~for~~industrial ~~these~~OEMs, ~~heating~~as ~~products~~well ~~are~~as ~~HVAC~~contractors ~~wholesalers, installers,~~ and end users in a variety of ~~residential,~~ commercial and industrial applications, including ~~residential~~supermarkets, ~~garages~~refrigerated warehouses, ~~warehousing~~logistic centers, ~~manufacturing~~cold rooms, precision and ~~greenhouses~~industrial cooling, hospitality, hotels, and restaurants. In fiscal ~~2025~~2026, the ~~North~~commercial ~~American residential~~ and ~~commercial~~industrial ~~heating~~refrigeration markets ~~were~~experienced ~~relatively~~modest ~~flat~~growth. We ~~While~~expect ~~the~~this ~~heating~~trend ~~market~~to ~~benefited~~continue ~~from~~during anfiscal ~~extended~~2027, ~~winter~~driven ~~season~~by ~~this~~improving ~~year,~~standards ~~the~~of ~~improvement~~living ~~was~~in ~~tempered~~emerging bycountries, ~~distributors~~as ~~reducing~~well ~~their~~as ~~elevated~~more ~~inventory~~stringent ~~stock~~energy ~~levels. We~~efficiency ~~expect~~regulations ~~the~~in Europe and North ~~American~~America, ~~heating~~partially ~~markets~~offset ~~will~~by ~~experience~~anticipated ~~modest~~investment ~~growth~~delays in ~~fiscal~~connection ~~2026~~with general market and economic uncertainties. ~~Longer~~Regulations ~~term~~focused on eliminating fluorinated gases, wewhich ~~anticipate~~are man-made gases that ~~increasing~~contribute ~~demands~~to ~~for~~the ~~energy~~global ~~efficiency~~greenhouse aseffect, ~~well~~have asshifted ~~decarbonization~~investments ~~and~~from ~~lower~~synthetic ~~emission~~to ~~initiatives~~natural ~~and~~gas, ~~regulations~~including ~~will~~carbon ~~impact~~dioxide ~~the~~cooling ~~North~~solutions, ~~American~~and ~~heating~~are driving growth in mature markets in Europe and North America.

~~Indoor~~Power ~~air~~generation ~~quality~~and transmission cooling products, primarily sold to ~~the~~power ~~North~~generation ~~American~~and ~~school~~transmission and ~~commercial~~pulp ~~HVAC~~and paper markets, include ~~single~~motor ~~packaged~~and ~~unit~~power ~~ventilators~~generator cooling coils, ~~modular~~transformer ~~chillers~~oil coolers, ~~air~~radiators, ~~handler~~dryers ~~units~~and industrial heat exchangers to the industrial power generation, ~~condensing~~conversion, ~~units~~and transmission and industrial process markets in EMEA, China, and ~~ceiling~~North ~~cassettes~~America. Customers for these ~~indoor air quality~~ products primarily include ~~mechanical~~industrial ~~contractors~~OEMs, ~~HVAC~~utility ~~wholesalers,~~companies ~~installers~~and electrical distribution and transmission system operators, and end users in aindustrial ~~variety~~applications offor ~~commercial~~capital projects within the pulp and ~~industrial~~paper ~~applications~~industry. In fiscal ~~2025~~2026, the ~~North~~power ~~American~~generation ~~school~~ and ~~commercial~~transmission ~~HVAC~~ markets experienced strong growth, ~~with~~benefitting ~~the~~from ~~strongest~~energy ~~growth~~transition programs, which promote renewable energy sources, such as wind and solar, and modernization investments in ~~the~~electricity ~~school~~infrastructure, including power grids and ~~healthcare~~energy ~~markets~~storage. WeIn ~~expect~~addition, ~~modest~~global ~~market~~demand ~~growth~~for inelectricity ~~fiscal~~has ~~2026~~increased. Data tocenters beare ~~driven~~using bymore ~~continued~~power ~~demand~~to insupport ~~schools~~digital ~~and~~technologies, ~~commercial~~including ~~buildings~~AI. We expect ~~the~~strong ~~commercial~~growth ~~HVAC~~in ~~market~~these markets will continue toin ~~expand~~fiscal as2027, ~~businesses~~with ~~are~~particularly ~~increasingly~~strong ~~prioritizing~~demand ~~indoor~~for ~~air~~transformer ~~quality~~oil ~~and~~cooler ~~energy-efficient~~products ~~HVAC~~driven ~~solutions~~by tothe ~~ensure~~increasing ~~healthier~~demand ~~environments~~for electricity. In addition, we expect modest growth in demand for ~~employees~~radiators related to backup and ~~customers~~primary power generation and tomodest ~~lower~~growth ~~operating~~in ~~costs~~the pulp and paper markets.

HVAC Technologies

The HVAC Technologies business provides an array of heating and indoor air quality solutions.

Heating products, primarily sold to the North American residential, commercial, industrial, portable, and agricultural heating markets, include unit heaters (indirect & direct gas-fired, hydronic, electric and oil-fired); roof-mounted direct- and indirect-fired makeup air units; duct furnaces (indoor and outdoor); infrared units (high- and low-intensity); and perimeter heating products (cabinet unit heaters and convectors). The primary customers for these heating products are HVAC wholesalers, installers, and end users in a variety of residential, commercial, industrial, and agricultural applications, including residential garages, warehouses, manufacturing sites, greenhouses, construction sites, poultry buildings, and swine facilities. In fiscal 2026, the primary heating markets we serve experienced moderate growth. We expect the North American heating markets will continue on this trend and experience modest growth during fiscal 2027. Longer term, we expect regulatory activity, including higher efficiency mandates and regulations aimed at reducing environmental impacts, will increase demand for decarbonized heating solutions in the North American heating markets.

Indoor air quality products, primarily sold to the North American school and commercial HVAC markets, include single packaged unit ventilators, ceiling cassettes, modular chillers, air handling units, condensing units and desiccant dehumidifiers. Customers for these indoor air quality products include mechanical contractors, HVAC wholesalers, installers, and end users in a variety of commercial and industrial applications. In fiscal 2026, the North American school and commercial HVAC markets experienced growth, with the strongest growth in the school, healthcare and multifamily markets. In fiscal 2027, we expect moderate market growth in the commercial HVAC markets, as businesses are increasingly prioritizing indoor air quality, heat pump technology and energy-efficient HVAC solutions to ensure healthier environments for employees and customers and to lower operating costs. We expect the school market will be relatively flat in fiscal 2027.

Refrigeration products, primarily sold to the commercial and industrial refrigeration markets in EMEA, China, and North America, include evaporator unit coolers, remote condensers, fluid coolers, gas coolers, and dry and brine coolers. Customers for these coolers and refrigeration products primarily include wholesalers, distributors and resellers, commercial and industrial OEMs, as well as contractors and end users in a variety of commercial and industrial applications, including supermarkets, refrigerated warehouses, logistic centers, cold rooms, precision and industrial cooling, hospitality, hotels, and restaurants. In fiscal 2025, the commercial and industrial refrigeration markets experienced modest growth. We expect moderate growth in the global refrigeration markets in fiscal 2026, driven by improving standards of living in emerging countries, as well as more stringent energy efficiency regulations in Europe and North America, partially offset by anticipated investment delays in connection with general market and economic uncertainties. Regulations focused on eliminating fluorinated gases, which are man-made gases that contribute to the global greenhouse effect, have shifted investments from synthetic to natural gas, including carbon dioxide cooling solutions, and are driving growth in mature markets in Europe and North America.

In addition, the HVAC&R business sells motor and generator cooling coils, transformer oil coolers, radiators, dryers and industrial heat exchangers to the industrial power generation, conversion, and transmission and industrial process markets in EMEA, China, and North America. Customers for these products primarily include industrial OEMs as well as contractors and end users in industrial applications and for capital projects within the pulp and paper industry. In fiscal 2025, the pulp and paper sector experienced modest growth and demand for industrial power and process products also improved. We expect these markets will be stable in fiscal 2026, with an increase in demand for transformer oil cooler products, driven by higher electricity demands, and modest demand growth in the pulp and paper sector.

Performance Technologies Segment

The Performance Technologies segment provides products and solutions that enhance the performance of customer applications and develops solutions that provide mission critical energy for a variety of end market applications. The segment also provides solutions that increase fuel economy, reduce harmful emissions and maximize range in zero emission applications. The Performance Technologies segment designs and manufactures products and solutions using air-cooled and liquid-cooled technology for vehicular, stationary power, and industrial applications. In addition, the Performance Technologies segment provides advanced thermal solutions to zero-emission and hybrid commercial vehicle and off-highway customers.

The Performance Technologies segment has strategically aligned its teams around three primary market-based verticals: i) Air-Cooled Applications; ii) Liquid-Cooled Applications, and iii) Advanced Solutions.

Table of Contents

~~Air-Cooled~~Performance ~~Applications~~Technologies Segment

The ~~Air-Cooled~~Performance ~~Applications~~Technologies ~~business~~segment provides ~~air-cooled~~products ~~heat exchangers~~ and ~~modules~~solutions ~~for~~that ~~vehicular,~~enhance ~~mission~~the ~~critical~~performance ~~stationary~~of ~~power,~~customer ~~and industrial~~ applications~~. This~~ ~~business~~and ~~primarily~~develops ~~serves~~solutions ~~the~~that ~~commercial~~provide ~~vehicle, off~~mission-~~highway~~critical ~~and~~energy ~~power~~for ~~generation~~a ~~markets~~variety inof ~~North~~end ~~America,~~market ~~Brazil, China, India, Europe and South Korea~~applications. ItThe ~~primarily~~segment ~~sells~~also ~~powertrain~~provides ~~cooling~~solutions ~~products,~~that ~~such~~increase asfuel ~~radiators~~economy, ~~condensers,~~reduce ~~engine~~harmful ~~cooling~~emissions ~~modules, charge air coolers, fan shrouds,~~ and ~~surge~~maximize ~~tanks;~~range ~~and~~in ~~cooling~~zero ~~module~~emission ~~generator sets (“Gensets”)~~applications. ~~Its~~The ~~customers~~Performance ~~include~~Technologies ~~commercial,~~segment ~~medium-~~designs and ~~heavy-duty~~manufactures ~~truck~~products and ~~engine~~solutions ~~manufacturers;~~for ~~construction~~vehicular, ~~agricultural~~stationary power, and ~~mining~~industrial ~~equipment~~applications. In addition, ~~and~~the ~~mission~~Performance ~~critical~~Technologies ~~power~~segment ~~generation~~provides ~~manufacturers;~~advanced ~~and~~thermal ~~industrial~~solutions ~~manufacturers~~to ofzero-emission ~~material~~and ~~handling~~hybrid ~~equipment~~commercial vehicle, ~~Gensets~~bus, and ~~compressors~~specialty vehicle customers.

~~During fiscal 2025, the commercial vehicle markets in India and Brazil experienced moderate growth, yet the commercial vehicle market in North America experienced weakness.~~ The ~~agriculture~~Performance ~~markets~~Technologies insegment ~~North~~has ~~America~~strategically ~~and~~aligned ~~Europe~~its ~~experienced~~teams ~~significant~~around ~~declines~~two ~~and~~primary ~~were~~product ~~negatively~~groups: ~~impacted~~i) byHeavy-Duty ~~lower~~Equipment; ~~crop prices, higher interest rates~~ and ~~the~~ii) ~~continued~~On-Highway ~~military conflict in Ukraine~~Applications. As these market conditions challenged the profitability of farming, farmers purchased less new equipment and agriculture OEMs reduced production and inventory levels throughout the year. The global construction and mining markets also experienced weakness, with the exception of the construction market in the U.S., which benefited from government programs incentivizing construction investments, such as the Inflation Reduction Act. The power generation markets in North America, Europe, and India saw strong growth during fiscal 2025, driven by new data center construction and demand for backup power Gensets for critical infrastructure, such as hospitals, mining and airports.

Looking ahead, we expect the commercial vehicle markets will largely continue trending similarly in fiscal 2026, with moderate growth in India and Brazil and market softness in North America. We expect the global agriculture markets to experience further declines in fiscal 2026, particularly in North America and Europe. While we are optimistic that crop prices may begin to rebound and interest rates may continue to trend favorably, which would aid the recovery of the agriculture markets, we do not anticipate significant recovery until fiscal 2027. In fiscal 2026, we expect modest growth in the global construction markets. We believe largeHeavy-~~scale~~Duty infrastructure development projects, including those for data centers and artificial intelligence, will benefit the construction markets. We expect these large-scale development projects will increase the need for construction equipment including loaders, excavators, cranes and bulldozers. Equipment

~~Liquid~~The Heavy-~~Cooled~~Duty ~~Applications~~Equipment business provides heat exchangers and cooling modules for off-highway markets, including agricultural and construction. In addition, the Heavy-Duty Equipment business sells cooling module generator sets that provide mission-critical stationary power. This business primarily serves the off-highway and power generation markets in North America, Brazil, China, India, Europe and South Korea. It primarily sells powertrain cooling products, such as radiators, condensers, charge air coolers, oil coolers, and engine cooling modules; and cooling module generator sets (“Gensets”). Its customers include construction, agricultural, and mission-critical power generation manufacturers; and industrial manufacturers of material handling equipment, Gensets and compressors.

~~The~~During ~~Liquid-Cooled~~fiscal ~~Applications~~2026, ~~business~~the ~~provides~~agriculture ~~heat~~markets ~~exchangers~~in ~~for~~North ~~engine~~America, ~~stationary power~~Brazil, and ~~industrial~~Europe ~~applications~~were weak. ~~This~~These ~~business~~markets ~~primarily~~experienced ~~serves~~significant ~~the~~declines ~~commercial~~during ~~vehicle,~~fiscal ~~automotive~~2025, ~~and~~negatively ~~off-highway~~impacted ~~markets~~by inlower ~~North~~crop ~~America~~prices, ~~Europe,~~higher ~~China~~interest rates, ~~and~~geopolitical ~~India. Its~~trade ~~products~~restrictions, and ~~solutions~~impacts ~~include~~of ~~aluminum~~the ~~and~~military ~~stainless~~conflict ~~steel~~in ~~engine~~Ukraine. As ~~oil~~these ~~coolers,~~market ~~exhaust~~conditions ~~gas~~continued ~~recirculation~~to ~~(“EGR”)~~challenge ~~coolers,~~the ~~liquid~~profitability ~~charge~~of ~~air~~farming ~~coolers,~~during ~~transmission~~fiscal ~~and~~2026, ~~retarder~~farmers ~~oil~~purchased ~~coolers,~~less ~~chillers,~~new equipment and ~~condensers. Its~~agriculture ~~customers~~OEMs ~~include~~kept ~~commercial,~~production ~~medium-~~ and ~~heavy-duty~~inventory ~~truck~~levels ~~engine~~relatively ~~manufacturers~~low. We ~~and~~anticipate ~~automobile~~that ~~and~~the ~~light~~challenging ~~truck~~conditions ~~OEMs;~~for ~~and~~the ~~Tier-1~~agriculture ~~construction,~~markets ~~agricultural~~will ~~equipment,~~persist ~~and~~in ~~automotive~~fiscal ~~module manufacturers~~2027.

~~During~~The ~~fiscal 2025, the~~ global ~~commercial~~construction ~~vehicle~~ markets ~~served by our Liquid-Cooled Applications business~~ experienced declines, ~~with the largest declines~~ in ~~Europe~~fiscal ~~and North America. While we expect market softness will continue~~2026, welargely ~~are~~associated ~~optimistic~~with ~~that~~relatively ~~the~~high ~~medium-~~construction costs and ~~heavy-duty~~market ~~truck~~saturation ~~markets~~of ~~will~~“young” ~~begin~~construction toequipment ~~stabilize~~resulting infrom ~~fiscal 2026 based upon~~ recent ~~OEM~~strong ~~order~~purchasing ~~trends. In North America~~years, wereducing ~~are monitoring~~ the ~~U.S.~~need ~~Environmental~~for ~~Protection~~replacement ~~Agency’s~~or ~~upcoming~~new ~~Greenhouse~~purchases. We ~~Gas~~expect ~~Phase~~that 3these ~~regulations~~construction ~~for~~markets ~~commercial~~will ~~vehicles,~~begin ~~which~~to ~~includes~~recover ~~stricter~~and ~~emission~~experience ~~regulations~~modest ~~for~~growth ~~heavy-duty~~during ~~trucks~~fiscal ~~starting with the~~ 2027 ~~model year~~. IfWhile ~~these~~dealer ~~regulations~~inventory ~~are~~remains ~~significantly~~relatively ~~rolled back or eased~~high, itwe ~~would~~anticipate ~~likely~~that ~~dampen the anticipated surge of heavy~~large-~~duty~~scale ~~truck~~infrastructure ~~orders~~development ~~prior~~projects, toincluding ~~the~~those ~~new~~for ~~regulations~~data ~~going~~centers ~~into~~and ~~effect. Regarding the automotive markets~~AI, ~~the European~~ and ~~North~~projects ~~American~~incentivized ~~automotive~~by ~~markets~~government ~~experienced moderate declines during fiscal 2025~~programs, ~~while~~such as the ~~automotive~~Inflation ~~market~~Reduction Act in ~~China~~the ~~saw~~U.S., ~~moderate~~will ~~growth~~benefit ~~compared with~~ the ~~prior~~construction ~~year~~equipment markets. We expect ~~the~~these ~~global~~large-scale ~~automotive~~development ~~markets~~projects will ~~remain~~increase ~~relatively weak during fiscal 2026 and are monitoring~~ the ~~current~~need ~~uncertainty~~for inconstruction ~~the~~equipment ~~marketplace~~including ~~related~~loaders, toexcavators, ~~the~~cranes ~~potential~~and ~~impacts~~bulldozers. The onpower ~~vehicle~~generation ~~sales~~markets ~~from~~in ~~trade~~North ~~conflicts~~America, Europe, and ~~future~~India ~~emission~~saw ~~requirements~~strong ~~for~~growth ~~internal~~during ~~combustion~~fiscal ~~engines. The~~2026, ~~off-highway~~driven ~~markets~~by ~~that~~new wedata ~~serve~~center ~~experienced~~construction ~~declines~~and instrong ~~fiscal~~demand ~~2025~~for AI and webackup ~~expect~~power ~~further~~Gensets ~~weakness~~for incritical ~~these~~infrastructure, ~~markets~~such ~~during~~as ~~fiscal~~data ~~2026~~centers, ~~particularly~~hospitals, ~~within~~mining ~~the~~and ~~agriculture markets~~airports.

On-Highway Applications

The On-Highway Applications business provides heat exchangers and cooling systems for commercial vehicle, automotive, bus and specialty vehicle markets in North America, Europe, Brazil, China, and India. Its products and solutions include products for traditional powertrains, including aluminum and stainless steel engine oil coolers, exhaust gas recirculation (“EGR”) coolers, charge air coolers, transmission and retarder oil coolers, chillers, condensers, fan shrouds, and surge tanks. Customers for its traditional powertrain products and solutions include commercial, medium- and heavy-duty truck and engine manufacturers and automobile and light truck OEMs; and automotive Tier 1 suppliers. In addition, this business provides products and solutions for zero-emission and hybrid passenger car, commercial vehicle, bus and specialty vehicles, including complete battery thermal management systems, electronics cooling packages, battery chillers, battery cooling plates, coolers and casings for electronics cooling, and coolers for electric axles (“e-axles”). Customers for its zero-emission and hybrid vehicles products and solutions include commercial vehicle, bus and specialty vehicle, off-highway, and automotive OEMs, e-axle producers, and power electronics providers.

Table of Contents

~~Advanced~~During ~~Solutions~~fiscal 2026, the commercial vehicle market in India experienced strong growth, while the commercial vehicle markets in Brazil and China were relatively flat. In North America and Europe, the commercial vehicle markets experienced continued weakness during 2026. Uncertainties, including those related to the impacts of tariffs, geopolitical tensions and emissions regulations, have been negatively impacting the commercial vehicle markets. While we expect market softness will continue in fiscal 2027, we are optimistic that the medium- and heavy-duty truck markets may begin to recover based upon recent OEM order trends and reported outlooks. In North America, we are monitoring the U.S. Environmental Protection Agency’s upcoming Greenhouse Gas Phase 3 regulations for commercial vehicles, which include stricter emission regulations for heavy-duty trucks starting with the 2027 model year. If these regulations are significantly rolled back or eased, it would likely dampen the anticipated surge of heavy-duty truck orders prior to the new regulations going into effect.

~~Our~~The ~~Advanced~~European ~~Solutions business provides products~~ and ~~solutions~~North ~~for~~American ~~zero-emission~~automotive ~~and~~markets ~~hybrid~~experienced ~~vehicles. These~~moderate ~~products~~declines ~~and~~during ~~solutions~~fiscal 2026, ~~which~~while ~~are primarily sold to~~ the ~~commercial vehicle, bus and specialty vehicle, off-highway and~~ automotive ~~markets~~market in ~~North~~China ~~America~~saw ~~and~~moderate ~~Europe,~~growth ~~include~~compared ~~complete~~with ~~battery~~the ~~thermal~~prior ~~management~~year. We ~~systems,~~expect ~~electronics~~the ~~cooling~~global ~~packages,~~automotive ~~battery~~markets ~~chillers,~~will ~~battery~~remain ~~cooling~~relatively ~~plates,~~flat ~~coolers~~during ~~and~~fiscal ~~casings~~2027 ~~for electronics cooling,~~ and ~~coolers~~are ~~for~~monitoring ~~electric~~the ~~axles~~current ~~(“e-axles”). Customers~~uncertainty ~~for~~in ~~these~~the ~~products~~marketplace ~~include~~related ~~commercial~~to ~~vehicle,~~the ~~bus~~potential ~~and~~impacts ~~specialty~~on vehicle, ~~off-highway,~~sales ~~and~~from ~~automotive~~trade ~~OEMs,~~conflicts ~~e-axle~~and ~~producers,~~future ~~and~~incentives ~~power~~for ~~electronics~~electric ~~providers~~vehicles.

The primary markets served by the Advanced Solutions business experienced strong growth during the first half of fiscal 2025, but subsequently slowed during the second half of the year. Uncertainty in the marketplace regarding federal government funding related to electric vehicles has resulted in market softness, which we expect will continue into fiscal 2026. Longer-term, we expect increased demand for electric vehicles and other lower-emission vehicle platforms, including fuel cell and hybrid platforms, will benefit the markets served by our Advanced Solutions business.

Geographic Areas

We maintain administrative organizations in all key geographic regions to facilitate customer support, development and testing, and other administrative functions. We operate in four continents and within the following countries:

North America South America Europe Asia Canada Brazil Germany China Mexico Hungary India United States Italy South Korea Netherlands United Arab Emirates Serbia Spain Sweden United Kingdom

Our non-U.S. subsidiaries and affiliates manufacture and sell a number of data center cooling, heat transfer, HVAC&R and vehicular products, similar to those we produce in the U.S.

Exports

Export sales from the U.S. to foreign countries, as a percentage of consolidated net sales, were 76 percent in fiscal ~~2025,~~2026 ~~2024,~~and 7 percent in both fiscal 2025 and ~~2023~~2024.

We believe our international presence positions us to benefit from the anticipated long-term growth of the global data center cooling, HVAC&R and vehicular markets. We are committed to increasing our involvement and investment in these international markets in the years ahead.

Customer Dependence

Our ten largest customers, some of which are conglomerates or otherwise affiliated with one another, accounted for 49 percent of our consolidated net sales in fiscal 2026. In fiscal 2026, one global technology customer in our Climate Solutions segment accounted for approximately 11 percent of our sales. In fiscal 2025 and 2024, our largest customer accounted for less than 10 percent of our net sales.

Table of Contents

~~Customer~~Our ~~Dependence~~top customers operate primarily in the data center cooling, commercial air conditioning and refrigeration, commercial vehicle, off-highway, and automotive and light vehicle markets. Our top customers across both of our segments, listed alphabetically, include: Carrier; Caterpillar; Deere; Stellantis (including Chrysler, Fiat, PSA-Peugeot-Citroen, and VM Motori); Trane; Volkswagen (including Audi, MAN, Porsche, Scania, and International); and Volvo (including Mack Trucks and Renault Trucks). In addition, our Climate Solutions segment includes significant sales to three customers of our Data Centers business, with which we are party to confidentiality agreements. Generally, we supply products to our customers on the basis of individual purchase orders received from them. When it is in the mutual interest of Modine and our customers, we utilize long-term sales agreements to minimize investment risks and provide the customer with a proven source of competitively-priced products. These contracts are typically three to five years in duration.

Our ten largest customers, some of which are conglomerates or otherwise affiliated with one another, accounted for 43 percent of our consolidated net sales in fiscal 2025. In fiscal 2025, 2024 and 2023, our largest customer accounted for less than 10 percent of our net sales.

Our top customers operate primarily in the data center cooling, commercial air conditioning and refrigeration, commercial vehicle, off-highway, and automotive and light vehicle markets. Our top customers across both of our segments, listed alphabetically, include: Ascent; Carrier; Caterpillar; Deere; Stellantis (including Chrysler, Fiat, PSA-Peugeot-Citroen, and VM Motori); Trane; Volkswagen (including Audi, MAN, Porsche, Scania, and International); and Volvo (including Mack Trucks and Renault Trucks). In addition, our Climate Solutions segment includes significant sales to two global technology customers with which we are party to confidentiality agreements. Generally, we supply products to our customers on the basis of individual purchase orders received from them. When it is in the mutual interest of Modine and our customers, we utilize long-term sales agreements to minimize investment risks and provide the customer with a proven source of competitively-priced products. These contracts are typically three to five years in duration.

Backlog of Orders

Our operating segments maintain their own inventories and production schedules. We believe that our segment teams can manage their operations and production capacity effectively and efficiently based upon expected sales volume in fiscal ~~2026~~2027 and beyond.

Raw Materials and Purchased Components

We purchase aluminum, copper, steel and stainless steel (nickel) from several domestic and foreign suppliers. In general, we do not rely on any one supplier for these materials, which are, for the most part, available from numerous sources in quantities required by us. While our suppliers may become constrained due to global demand, we typically do not experience raw material shortages and believe that our suppliers’ production of these metals will be adequate throughout the next fiscal year. We typically adjust metals pricing with our raw material suppliers on a monthly basis and our major fabricated component suppliers on a quarterly basis. When possible, we have included provisions within our long-term customer contracts which provide for adjustments to customer prices, on a prospective basis, based upon increases and decreases in the cost of key raw materials. When applicable, however, these contract provisions are limited to the underlying cost of the material based upon a relevant pricing source, such as the London Metal Exchange, American Metal Market, or Platts index, and typically do not include related metals premiums or fabrication costs. In addition, there can often be a three-month to one-year lag until the time that the price adjustments take effect.

In addition, we purchase certain parts and components from suppliers. Due to the increasing market demand for data center cooling products, demand for certain key components is currently outpacing supplier capacity. We began experiencing supply shortages in the fourth quarter of fiscal 2026. These component shortages are negatively impacting our production schedules and are tempering our planned production ramp-up for certain data center products. We are actively working with our supply chain, including qualifying new vendors, to mitigate the supply constraints.

Patents and Other Intellectual Property

We protect our intellectual property through patents, trademarks, trade secrets and copyrights. As a part of our ongoing R&D activities, we routinely seek patents on new products and processes. Our Patent Review Committee manages our intellectual property strategy and portfolio. We own or license numerous patents worldwide related to our products and operations. Also, because we have many product lines, we believe that our business as a whole is not materially dependent upon any particular patent or license, or any particular group of patents or licenses. We consider each of our patents, trademarks, and licenses to be of value and aggressively defend our rights throughout the world against infringement.

Table of Contents

Research and Development and Investments in Technology

We are committed to building better products that will, in turn, help create a better world. We are investing in products and technology to meet the challenging thermal management and indoor air quality needs of our customers within the markets we serve. Our ~~products~~thermal management solutions are often aimed at solving ~~difficult~~mission-critical ~~and complex~~ heat transfer challenges ~~requiring advanced thermal management solutions~~, while meeting the demand for increased energy efficiency and compliance with increasingly stringent regulations. Our heritage includes a depth and breadth of expertise in thermal management that, combined with our global manufacturing presence, standardized processes, and state-of-the-art technical resources, enables us to rapidly bring customized solutions to our customers.

We ~~strive~~aim to be at the forefront of technological advances through both strategic ~~inorganic~~acquisitions and investments in new technologies and meaningful internal R&D projects. R&D expenditures, including certain application engineering costs for specific customer solutions, totaled $3529 million, $4235 million, and $4442 million in fiscal ~~2025~~2026, ~~2024,~~2025 and ~~2023~~2024, respectively. Our R&D teams work closely with our customers on projects and system designs to ensure efficient and cost-effective development of technologies. We are strategically expanding our technology and product portfolio in the Data ~~Center~~Centers ~~Cooling~~ business within our Climate Solutions segment. We recognize the need for investment in this area as ~~artificial intelligence~~AI, machine learning, and other trends ~~are~~continue ~~driving~~to drive increased high performance computing, which increases heat loads and is driving the need for high-density cooling solutions. In fiscal ~~2025~~2026, we ~~launched~~expanded our ~~CDU~~chiller toline ~~provide~~and ~~critical~~introduced ~~cooling~~a ~~capacity~~3-megawatt ~~for~~chiller, ~~heat~~the ~~removal~~TurboChill™ in3+MW, ~~high-density~~to ~~data~~handle ~~center~~higher ~~environments~~heat loads. As a result of our data center ~~cooling~~ technology investments, we offer our customers multiple efficient, customizable products and solutions to elevate their performance while meeting their sustainability targets around power and water usage. Regarding HVAC&R markets, we are focused on developing sustainable solutions that optimize thermal efficiency and manufacturing to support decarbonization efforts and the use of next generation refrigerants, which help minimize climate change potential. Regarding the vehicular markets, our development projects include solutions to optimize the efficiency and reliability of commercial and off-highway vehicles. ~~In addition, we are developing solutions, including precision battery cooling, to optimize the performance of zero emission and hybrid vehicles.~~ We also collaborate with industry, university, and government-sponsored research organizations that conduct research and provide data on practical applications in the markets we serve. In addition, we engage in external research projects that complement our strategic internal research initiatives to further leverage our significant thermal technology expertise and capabilities.

Quality Improvement

Globally, we drive quality improvement by ~~maintaining~~adhering to the ~~Global~~ Modine ~~Management~~Quality ~~System~~Policy and ~~executing~~maintaining the Global Modine ~~Quality~~Management ~~Strategy~~System.

Our actions and decisions are driven by our purpose: Engineering a Cleaner, Healthier World™. We are committed to evolving our product portfolio in pursuit of highly engineered, mission-critical thermal solutions. We strive to deliver customer-centric solutions with superior quality and dedicated service throughout the product lifecycle.

Through our integrated and process-oriented Global Modine Management System, the majority of our manufacturing facilities and administrative offices are registered to ISO 9001:2015 or IATF 16949:2016 standards, helping to ensure that our customers receive high quality products and services. We regularly monitor our process performance to meet or exceed rising customer expectations for products, services and quality.

Our Global Modine Management System supports our mission and values by applying well-defined improvement principles and leadership behaviors, ~~all~~ based on our 80/20 mindset to facilitate rapid improvements. We drive sustainable and systematic continual improvement throughout our company by utilizing the principles, processes and behaviors of the Global Modine Management System.

To ensure future quality, we ~~continue~~remain tofocused ~~execute the Modine Quality Strategy, which focuses~~ on people, process, performance, quality engineering, and the Global Modine Management System. Complementary technical regulatory compliance requirements are integrated appropriately to support the intent of our company’s purpose.

Table of Contents

Environmental Matters

We are committed to Engineering a Cleaner, Healthier World™ and work every day to ~~use our thermal management expertise to~~ help our customers ~~improve~~meet ~~air~~their ~~quality,~~objectives ~~reduce~~by ~~energy~~engineering ~~and~~efficient, ~~water consumption~~durable, ~~lower~~and ~~harmful~~innovative ~~emissions,~~solutions ~~enable~~that ~~cleaner~~reduce ~~running~~environmental ~~vehicles~~impact and ~~use~~enhance ~~more environmentally friendly refrigerants~~performance. In addition, we are committed to conducting business at our global locations in an environmentally conscious manner, and are embracing our responsibility to reduce the carbon footprint of our operations, products, and value chain and promoting renewal energy programs. During fiscal 2025, we became a signatory to the United Nations (“UN”) Global Compact, the world’s largest voluntary corporate sustainability initiative, as part of our commitment to align our operations and sustainability targets. The environmental principles within the UN Global Compact promote a greater sense of environmental responsibility and the development of environmentally friendly technologies.

InWe are prioritizing decarbonization strategies across our global business operations, wefocusing ~~are~~on ~~working to improve~~ energy-efficient ~~efficiency,~~manufacturing ~~minimize water waste,~~ and ~~increase~~operational ~~the~~improvements ~~amount~~across ofour ~~waste recycled or diverted from landfills~~footprint. We have empowered each of our global facilities to invest in facility upgrades and enhancements that support our sustainability goals. WeAs an example, our team in Brazil recently upgraded to zero-emission, lithium battery-powered forklifts. This change reduced its emissions and also eliminated the risks associated with storing and handling flammable liquefied petroleum gas, which powered the facility’s previous forklifts. Our teams are also focused on reducing water usage and reducing and recycling waste, such as scrap metal, paint, used oils, chemicals, and solvents. In addition, we are partnering with local utilities and government entities toon ~~implement~~renewable ~~renewal~~ energy and conservation projects. We are utilizing resource tracking technologies and waste management programs, installing solar panel systems and more efficient LED lighting systems, replacing inefficient boilers and air compressors and installing improved building HVAC management systems. The majority of our facilities maintain Environmental Management System (“EMS”) certification to the international ISO14001 standard through independent third-party audits.

In regard to providing innovative, climate-resilient solutions that enable our customers to meet their sustainability goals, we are continuously driving energy efficiency across our product portfolio. Our Climate Solutions segment continues to develop high-efficiency solutions and products, particularly in the areas of data center cooling, heating, and indoor air quality. For example, ~~our~~data ~~Data~~centers ~~Center~~are ~~Cooling~~significant ~~business~~power isconsumers. ~~focused~~We onare developing and providing solutions ~~that~~to help our data center customers optimize performance and reduce energy and water consumption. ToOur ~~do this, the~~ Data ~~Center~~Centers ~~Cooling~~ business ~~has invested in cooling technologies and has leveraged our deep thermal management expertise to expand its product portfolio. The business~~ offers customers ~~tailored~~a ~~air,~~broad ~~liquid,~~suite ~~and~~of ~~hybrid~~tailored ~~(air and liquid)~~ cooling solutions to meet their needs and sustainability goals. We are also shifting our product portfolios toward lower-emission propellants and refrigerants, which greatly reduce the environmental impact of and enhance energy efficiency for our customers’ heating and cooling systems. Our Performance Technologies segment is focused on product and technology innovations to improve efficiency and lower carbon emissions. Our oil, charge-air, and EGR coolers, radiators, air conditioning condensers, and battery thermal management systems for ~~trucks,~~on-highway ~~buses, cars, specialty~~ vehicles, and off-highway equipment allow both electric vehicle and internal combustion systems to run at optimal temperatures, which promotes better fuel efficiency, lower emissions, and improved vehicle lifespans, while still providing the vehicle performance that our customers expect.

Obligations for environmental-related remedial activities may arise at our facilities due to past practices, or as a result of a property purchase or sale. These obligations most often relate to sites where past operations followed practices that were considered acceptable under then-existing regulations, but now require investigative and/or remedial work to ensure appropriate environmental protection or where we are a successor to the obligations of prior owners and current laws and regulations require investigative and/or remedial work to ensure sufficient environmental compliance. We have recorded liabilities for environmental monitoring and remediation work at sites in the U.S. and abroad totaling $1613 million at March 31, ~~2025~~2026.

Seasonal Nature of Business

Our overall operating performance is generally not subject to a significant degree of seasonality. The Climate Solutions segment experiences some seasonality, as demand for certain HVAC&R products is affected by heating and cooling seasons, weather patterns, project construction, and other factors. Sales volume for our Climate Solutions heating products is generally stronger in our second and third fiscal quarters, corresponding with demand for these products. We generally expect sales volume for our Climate Solutions refrigeration, power generation and conversion, and heat transfer products to be higher during our first and second fiscal quarters due to the construction seasons in the northern hemisphere. Sales to Performance Technologies vehicular OEM customers are dependent upon market demand for new on-highway vehicles and off-highway equipment. However, our second fiscal quarter production schedules are typically impacted by customer summer shutdowns and our third fiscal quarter is affected by customer holiday shutdowns.

Table of Contents

Seasonal Nature of Business

Our overall operating performance is generally not subject to a significant degree of seasonality. The Climate Solutions segment experiences some seasonality, as demand for HVAC&R products is affected by heating and cooling seasons, weather patterns, project construction, and other factors. Sales volume for our Climate Solutions heating products is generally stronger in our second and third fiscal quarters, corresponding with demand for these products. We generally expect sales volume for our Climate Solutions refrigeration, power generation and conversion, and heat transfer products to be higher during our first and second fiscal quarters due to the construction seasons in the northern hemisphere. Sales to Performance Technologies vehicular OEM customers are dependent upon market demand for new vehicles. However, our second fiscal quarter production schedules are typically impacted by customer summer shutdowns and our third fiscal quarter is affected by customer holiday shutdowns.

Working Capital

We manufacture products for the majority of customers on an as-ordered basis, which makes large inventories of finished products unnecessary, with the exception of certain products in our Climate Solutions segment. Within our Climate Solutions segment, we maintain varying levels of finished goods inventory, primarily related to our heating and data center cooling businesses, due to seasonal demand and project construction schedules, respectively. During fiscal 2026, we increased inventory levels in our Climate Solutions segment to support the rapid expansion of our Data Centers business. In Brazil, within our Performance Technologies segment, we maintain aftermarket product inventory in order to timely meet customer needs in the Brazilian commercial vehicle and automotive aftermarkets. We have not experienced a significant number of returned products within any of our businesses.

Human Capital Resource Management

As of March 31, ~~2025~~2026, we employed approximately 1113,~~300~~200 persons worldwide.

We recognize that our continued success is a direct result of the quality of our people. As such, we strive to be an employer of choice in every community in which we operate. We do this by fostering a fair, respectful, and safe work environment for our people in alignment with our core values.

We have identified priorities that we believe are essential to attract, develop and retain highly-qualified talent. These include, among others, i) providing career development programs; ii) promoting health and safety; iii) fostering people-centric values; and iv) providing competitive compensation and benefits.

Workforce development

Our operations require expertise across a wide range of disciplines, from engineering and manufacturing to accounting and finance to information technology. Our human resources team, in connection with our ~~Company~~company leaders across the globe, work to hire talented individuals who align with our values.

All of our new employees go through a comprehensive onboarding program with their managers to ensure proper training is provided to succeed in their respective roles. We also encourage our employees to further develop their skills through both internal and external training programs.

We are committed to growing our employees’ capabilities. Through our Performance and Development Process (“PDP”), we provide all salaried employees with a consistent, structured development and performance review experience. The PDP provides employees with a development pathway that focuses on both annual performance goals and longer-term career development. In addition, we perform strategic talent reviews and succession planning on a regular cadence.

Table of Contents

Health and safety

The health and safety of our employees is paramount to us. We are committed to conducting our business operations in a safe and healthy manner. We employ a behavior-based safety program which proactively seeks to correct at-risk behaviors while positively reinforcing safe behaviors. We educate and train employees on safe practices and promote personal accountability and responsibility for safety at all levels of our organization.

We have consistently out-performed the private-industry Recordable Incident Rate (“RIR” as defined by the Occupational Safety and Health Administration) average for the manufacturing sector, which was 2.87 in ~~2023~~2024, the most recent year for which data is available. During fiscal ~~2025~~2026, we recorded an RIR of 1.04, well below the manufacturing sector average.

Table of Contents

People centric

As a global employer, we are committed to providing working environments where our employees feel supported and valued. We treat all people equally and with dignity and respect. We appreciate our employees and their contributions, from the fresh perspectives of our interns to the seasoned experience of our longstanding professionals. We create relationships where our employees feel valued and appreciated for who they are and what they can contribute. We reward merit and accountability. One way we formally recognize accomplishments of our employees is through our Modine Values People Awards. In addition, we focus on qualitative indicators across our global operations, such as the movement and promotion of employees between our global business units.

Competitive compensation and benefits

We offer our employees competitive compensation and comprehensive benefit packages. We regularly benchmark our compensation practices and benefits programs against those of comparable industries and in the geographic areas where our facilities are located. We believe that our compensation and employee benefits are competitive and allow us to attract and retain talent throughout our organization.

Available Information

Through our website, www.modine.com (Investors link), we make available, free of charge, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, proxy statements, other Securities Exchange Act reports and all amendments to those reports as soon as reasonably practicable after such material is electronically filed with, or furnished to, the Securities and Exchange Commission (“SEC”). Our reports are also available free of charge on the SEC’s website, www.sec.gov. Also available free of charge on our website are the following corporate governance documents, among others:

Code of Conduct, which is applicable to all Modine directors and employees, including our executive officers;

Guidelines on Corporate Governance;

Audit Committee Charter;

Human Capital and Compensation Committee Charter;

Corporate Governance and Nominating Committee Charter; and

Technology Committee Charter.

All of the reports and corporate governance documents referenced above and other materials relating to corporate governance may also be obtained without charge by contacting Corporate Secretary, Modine Manufacturing Company, 1500 DeKoven Avenue, Racine, Wisconsin 53403-2552. WeOur ~~do not intend to incorporate our~~ internet website and the information contained therein or incorporated therein are not incorporated into this Annual Report on Form 10-K.

Table of Contents

ITEM 1A. RISK FACTORS.

In the ordinary course of our business, we face various market, operational, strategic, financial and general risks. These risks could have a material impact on our business, financial condition, results of operations and cash flows. Please consider each of the risks described below, along with other information contained in this Annual Report on Form 10-K, when making any investment decisions with respect to our securities.

Our Enterprise Risk Management process seeks to identify and address material risks. We believe that risk-taking is an inherent aspect of operating a global business and, in particular, one focused on growth and cost-competitiveness. Our goal is to proactively manage risks in a structured approach in conjunction with strategic planning, while preserving and enhancing shareholder value. However, the risks set forth below and elsewhere in this report, as well as other risks currently unknown or deemed immaterial at the date of this report, could materially adversely affect us and cause our financial results to vary materially from recent or anticipated future results. These disclosures reflect our beliefs and opinions as to factors that could materially and adversely affect the Company and its securities in the future. References to past events are provided by way of example only and are not intended to be a complete listing or a representation as to whether or not such factors have occurred in the past or their likelihood of occurring in the future.

A.	MARKET RISKS

Economic uncertainties

Economic, political, and general market conditions could adversely affect our business, financial position, results of operations and cash flows.

We operate in 16numerous countries on four continents and serve customers in a wide array of commercial, industrial, HVAC&R, and vehicular markets. As such, our business is impacted by general economic, political, and industry conditions globally as well as in the regions and countries in which we conduct business. We are subject to the risk of disruptions or significant deterioration in market conditions, which could have a material impact on our business, financial position, results of operations and cash flows. ~~Military~~Geopolitical tensions and military conflicts, including the ~~ongoing~~conflict ~~conflicts~~between inthe ~~Ukraine~~U.S. and inIran, ~~the~~as ~~Middle~~well ~~East~~as ~~and~~related ~~heightened~~regional ~~tension~~instability inor ~~the~~proxy ~~Red Sea~~conflicts, could negatively impact or cause significant business disruptions in the global markets we operate in. InOngoing ~~addition,~~conflicts ~~customer demand for our products~~ and ~~system~~any ~~solutions~~potential isfurther ~~impacted~~escalation, bycould ~~the~~lead ~~overall~~to ~~strength~~significant ofdisruption ~~the~~near ~~economy,~~major ~~employment~~oil ~~levels,~~producing ~~consumer~~regions ~~confidence~~or ~~levels,~~in ~~the~~shipping ~~availability~~corridors and ~~cost~~could ofresult ~~credit,~~in ~~and~~higher ~~the~~energy ~~cost~~and of fuel~~. For~~ ~~example~~prices, ~~rising~~shipping ~~interest~~delays, ~~rates~~increased ~~associated~~freight ~~with~~and ~~inflationary~~manufacturing ~~market~~costs, ~~conditions~~and ~~may~~increased ~~drive~~cyberattacks afrom ~~higher~~state-sponsored ~~cost~~or ofother ~~capital~~actors. Such ~~for~~developments ~~our~~could ~~customers,~~also ~~which~~contribute ~~may~~to ~~have~~broader ainflationary ~~deteriorating~~pressures ~~impact~~across onthe ~~overall~~global ~~economic~~economy ~~activity~~ and ~~the~~supply ~~financial condition of our customers~~chains, ~~which~~including ~~could~~increased ~~negatively~~costs ~~impact the demand~~ for ~~our~~materials, ~~products. Prolonged~~transportation ~~recessionary~~and ~~or adverse economic conditions~~labor, ~~such~~which asmay ~~disruptions~~not inbe ~~the~~fully ~~global~~recoverable ~~financial~~through ~~system,~~pricing and could ~~result~~impact inthe ~~our~~availability, ~~customers~~reliability, orand ~~suppliers~~overall ~~experiencing~~viability ~~significant~~of ~~economic~~certain ~~constraints,~~supply ~~including potential bankruptcies~~sources.

~~Changes~~In inaddition, Ucustomer demand for our products and system solutions is impacted by the overall strength of the economy, employment levels, consumer confidence levels, the availability and cost of credit, and the cost of fuel.S. For orexample, ~~international~~rising ~~trade~~interest ~~policies~~rates associated with inflationary market conditions may drive a higher cost of capital for our customers, ~~including~~which may have a deteriorating impact on overall economic activity and the ~~imposition~~financial orcondition ~~increases~~of inour ~~tariffs~~customers, which could ~~adversely~~negatively ~~affect~~impact the demand for our ~~business~~products. Prolonged recessionary or adverse economic conditions, such as disruptions in the global financial ~~position~~system, ~~results~~could ofresult ~~operations~~in ~~and~~our ~~cash~~customers ~~flows~~or suppliers experiencing significant economic constraints, including potential bankruptcies.

There is uncertainty regarding future relationships between the U.S. and numerous other countries, particularly China, Canada, Mexico, and in Europe, with respect to trade policies, tariffs, treaties, and government regulations. Changes in U.S. policies could lead to changes to existing trade agreements, significant increases in tariffs, more restrictions on free trade, and restrictions on the importation of certain goods and components into the U.S. or other countries. A trade war or escalation of trade tensions, including increased tariffs and retaliatory measures by foreign governments, should they be sustained for an extended period of time, or changes in U.S. or international trade agreements, could negatively impact our supply chain, increase costs, and reduce demand for our products. Changes to or uncertainty in the marketplace related to U.S. social, political, regulatory and economic conditions or in laws and policies related to foreign trade in countries where we currently manufacture and sell our products, and any resulting negative sentiments towards the U.S., could adversely affect our business, financial position, results of operations and cash flows. Additional risks related to international trade policies and related matters are discussed throughout this section.

Table of Contents

Changes in U.S. or international trade policies, including the imposition of or increases in tariffs, could adversely affect our business, financial position, results of operations and cash flows.

In February 2026, the U.S. Supreme Court ruled that tariffs imposed in 2025 under the International Emergency Economic Powers Act were invalid (the “IEEPA Ruling”). However, other tariffs remain in effect and trade policies are unpredictable. There is also uncertainty with regard to the IEEPA Ruling, including the availability and timing of refunds, the potential for new tariffs to be invoked under alternative laws, the impacts on trade agreements between the U.S. and other countries, and the expectations of customers, suppliers, and others impacted by the tariffs. In addition, the rapid evolution, reversal, or replacement of trade measures following the IEEPA Ruling may contribute to increased policy volatility and uncertainty, which could complicate planning, pricing, sourcing, and contractual arrangements.

Additional risks and uncertainties related to international trade policies and related matters are discussed throughout this section.

A future widespread outbreak of an illness or other public health threat could adversely affect our business, financial position, results of operations and cash flows.

An outbreak of a disease or public health threat could create economic and financial disruptions and adversely affect our businesses around the world. Potential impacts of epidemics, pandemics, or other health crises include, but are not limited to, (i) staffing shortages if portions of our workforce are unable to work effectively due to illness, quarantines, government actions, facility closures, or other restrictions; (ii) short- or long-term disruptions in our supply chain and our ability to deliver products to our customers; (iii) deterioration in the markets that we or our customers operate in, which may result in lower sales or a deterioration in the ability of our customers to pay us; and (iv) significant volatility or negative pressure in the financial markets, which could adversely affect our access to capital and/or financing and could have a material impact on our business, financial position, results of operations and cash flows.

Customer and supplier matters

Increases in costs of materials, including aluminum, copper, steel and stainless steel (nickel), other raw materials and purchased components, could place significant pressure on our results of operations.

Increases in the costs of raw materials and other purchased components, which may be impacted by a variety of factors, including changes in trade laws, tariffs, sanctions, inflation, geopolitical and military conflicts, the behavior of our suppliers and significant fluctuations in demand, could have a significant negative impact on our results of operations. In the shorter-term, our ability to adjust for cost increases is limited when prices are fixed for current orders. In these cases, if we are not able to recover such cost increases through price increases to our customers, such cost increases will have an adverse effect on our results of operations. With regard to our longer-term sales programs, we have sought to reduce the risk of cost increases by including provisions within our customer contracts, where possible, which provide for prospective price adjustments based upon increases and decreases in the cost of key raw materials. However, where these contract provisions are applicable, there can often be a three-month to one-year lag until the time of the price adjustment. To further mitigate our exposure, from time to time we enter into forward contracts to hedge a portion of our forecasted aluminum and copper purchases. However, these hedges may only partially offset increases in material costs, and significant increases could have a material adverse effect on our results of operations and cash flows. In addition, cost increases passed through to our customers may have a negative effect on demand for our products, which could lead to decreases in purchase orders or non-renewal of customer contracts.

We could be adversely affected if we experience shortages of components or materials from our suppliers.

We regularly engage with our suppliers to ensure availability of purchased commodities and components used in manufacturing our products. We use a limited number of suppliers for certain components, including aluminum, copper, steel and stainless steel (nickel). We select our suppliers based upon total value (including price, delivery and quality), taking into consideration their production capacities, financial condition and willingness and ability to meet our demand. In some cases, it can take several months or longer to identify and accept a new supplier due to qualification requirements.

Strong demand, the potential effects of trade laws and tariffs, sanctions, capacity constraints, financial instability, geopolitical and military conflicts, public health crises, such as pandemics and epidemics, or other circumstances experienced by our suppliers could result in shortages or delays in their supply of product to us, or a significant price increase resulting in our need to resource to a different supplier. If we experience significant or prolonged shortages of critical components or materials from our suppliers and could not procure the components or materials from other sources, we may be unable to meet our production schedules and could miss product delivery dates, which would adversely affect our sales, results of operations, cash flows and customer relationships.

Table of Contents

Customer and supplier matters

Increases in the costs of raw materials and other purchased components, which may be impacted by a variety of factors, including changes in trade laws, tariffs, sanctions, geopolitical and military conflicts, inflation, the behavior of our suppliers and significant fluctuations in demand, could have a significant negative impact on our results of operations. In the shorter-term, our ability to adjust for cost increases is limited when prices are fixed for current orders. In these cases, if we are not able to recover such cost increases through price increases to our customers, such cost increases will have an adverse effect on our results of operations. With regard to our longer-term sales programs, we have sought to reduce the risk of cost increases by including provisions within our customer contracts, where possible, which provide for prospective price adjustments based upon increases and decreases in the cost of key raw materials. However, where these contract provisions are applicable, there can often be a three-month to one-year lag until the time of the price adjustment. To further mitigate our exposure, from time to time we enter into forward contracts to hedge a portion of our forecasted aluminum and copper purchases. However, these hedges may only partially offset increases in material costs, and significant increases could have a material adverse effect on our results of operations and cash flows. In addition, cost increases passed through to our customers may have a negative effect on demand for our products, which could lead to decreases in purchase orders or non-renewal of customer contracts.

We could be adversely affected if we experience shortages of components or materials from our suppliers.

We regularly engage with our suppliers to ensure availability of purchased commodities and components used in manufacturing our products. We use a limited number of suppliers for certain raw materials, including aluminum, copper, steel and stainless steel (nickel), and third-party parts and components required to make our products. We select our suppliers based upon total value (including price, delivery and quality), taking into consideration their production capacities, financial condition and willingness and ability to meet our demand. In some cases, it can take several months, or longer, to identify and accept a new supplier due to qualification and/or customer approval requirements.

Strong or rapidly increasing demand, including significant or unanticipated increases in demand for certain components driven by elevated levels of capital investment in end markets such as data centers, as well as the potential effects of trade laws and tariffs, sanctions, geopolitical and military conflicts, capacity constraints, financial instability, public health crises, such as pandemics and epidemics, or other circumstances experienced by our suppliers could result in shortages or delays in their supply of product to us, or significant price increases. In certain cases, such demand may exceed available market supply for key components, limiting our ability to obtain sufficient quantities from existing or alternative suppliers. We began experiencing supply shortages of certain data center product components in the fourth quarter of fiscal 2026, which are negatively impacting our production schedules for the first quarter of fiscal 2027. If we experience significant or prolonged shortages of critical components or materials from our suppliers and could not procure the components or materials from other sources, we may be unable to meet our production schedules and could miss product delivery dates, which would adversely affect our sales, results of operations, cash flows and customer relationships.

Our net sales and profitability could be adversely affected from business losses or declines with major customers.

Deterioration of a business relationship with a major customer could cause our sales and profitability to suffer. In certain areas of our businesses, including data centers, Gensets, and some portions of our vehicular businesses, a large portion of sales are attributable to a relatively small number of customers. The failure to obtain new business, or to retain historical order volumes or monetary values from a concentrated customer base could adversely affect our business and financial results. In addition, as a result of relatively long lead times required for many of our complex products and systems, it may be difficult in the short term for us to obtain new sales to replace a significant decline in sales to existing customers. The loss of a major customer in any of our businesses, or a significant decline in order volumes or quantities, or in the overall market demand for our products or services, could have an adverse effect on our business, results of operations and cash flows.

Table of Contents

Our results of operations could be adversely affected by pricing pressures from our customers.

Most of our products are sold in competitive markets. Our sales levels and margins could be adversely affected by pricing pressures from our customers and pricing actions of our competitors. Such pricing pressures may require us to adjust the prices of products to stay competitive. If we are unable to offset any price concessions through improved operating efficiencies and manufacturing processes, sourcing alternatives, technology enhancements and other cost reduction initiatives, our results of operations and cash flows could be adversely affected.

Our pricing strategies could negatively impact our overall win rate for new business.

As part of our application of 80/20 principles, we have improved our commercial acumen, including our pricing methodology, and have clear, strategic profit margin targets for new sales. We also negotiate for contract terms that allow for adjustments to our pricing in the event of increases in raw material and commodity costs, including costs associated with shipping, import/export and logistics. While we believe that our 80/20 pricing strategy will strengthen our business and allow us to focus our resources on higher margin sales programs, it is possible that it may result in a lower overall win rate for new business. If our pricing strategy results in winning less new business, our results of operations and cash flows could be adversely affected.

Climate ~~change~~ and ~~environmental,~~sustainability ~~social, and governance (“ESG”)~~ risks

Global climate change and related emphasis on ~~ESG~~sustainability ~~matters~~goals by various stakeholders could negatively affect our business.

Increased public awareness and concern regarding links between greenhouse gas emissions and global climate changes may result in more regional and/or federal requirements to reduce or mitigate the effects of greenhouse gas emissions. There continues to be ambiguity regarding the promulgation and enforcement of climate-related ~~change~~ regulations, which creates uncertainty in the markets in which we operate. This uncertainty extends to the use or adoption rate of many products within our product portfolio and our overall costs of regulatory compliance, which may impact the demand for our products and/or may require us to make increased capital expenditures to meet new standards and regulations. Further, our customers, other market participants, or government entities may impose emissions or other environmental standards upon us through regulation, market-based emissions policies or consumer preference that we may not be able to ~~timely~~ meet, oron ~~which~~a ~~may~~timely ~~not~~or becost-effective ~~economically feasible for us~~basis, due to the required level of capital investment or ~~required~~pace ~~speed~~ of technological advancement.

~~Additionally,~~Climate ~~climate~~ changes, such as extreme weather conditions, also create financial risk and uncertainty for our business. ~~For~~Demand ~~example, the demand~~ for our products and services may be affected by unpredictable or unseasonable weather conditions. Climate changes could also disrupt our operations by impacting the availability and cost of materials and resources needed for manufacturing and could increase our insurance and other operating costs. In addition, natural disasters or extreme weather events, including those as a result of climate ~~change~~changes, could disrupt our manufacturing operations and our ability to manufacture and deliver products to our customers and adversely impact our results of operations and cash flows. We could also face indirect financial risks passed through the supply chain, and process disruptions due to climate changes could result in price modifications for our products and the resources needed to produce them.

15Increased stakeholder focus on sustainability matters requires the continuous monitoring of evolving expectations, standards, and disclosure requirements across jurisdictions. Certain customers are requiring information on our environmental sustainability goals and commitments, which we have not released publicly. Stakeholders may hold divergent or changing views on sustainability initiatives, particularly in light of evolving political and market dynamics. There can be no assurance that our future plans, targets, goals or other commitments will be achieved or that related investments will meet applicable regulatory or stakeholder expectations.

~~Table~~A failure to adequately meet stakeholder expectations may result in the loss of ~~Contents~~business, diluted market valuation, an inability to attract and retain customers or an inability to attract and retain top talent. Likewise, a failure to comply with any current or future sustainability reporting requirements, as established by regulators in the U.S., Europe and beyond, may result in the loss of business, regulatory penalties, litigation, and/or reputational damage.

Furthermore, customer, investor, and employee expectations for ESG matters have been rapidly evolving. Specifically, certain customers are requiring information on our environmental sustainability goals and commitments, which we have not yet released publicly. There can be no assurance of the extent to which any of our future goals will be achieved, or that any investments we make in furtherance of achieving any such plans, targets, goals or other commitments will meet regulatory or legal standards regarding sustainability performance or any customer, investor, employee or other stakeholder expectations and desires regarding such goals or commitments.

Additionally, the enhanced stakeholder focus on ESG matters requires the continuous monitoring of evolving expectations, tolerances, and standards, as well as reporting requirements and disclosures associated with ESG-related goals and initiatives. Some stakeholders may disagree with our ESG initiatives and goals, as the political climate and investor sentiment changes over time. Stakeholders and regulators may also hold divergent opinions on ESG issues and conflicting expectations regarding our culture, values, goals and business, which may affect how we are regulated or perceived. Moreover, we may determine that it is in the best interest of the Company and our shareholders to prioritize other business investments over the achievement of our current ESG goals based on economic or technological developments, regulatory and social factors, business strategy or pressure from investors, activists, or other stakeholders. A failure to adequately meet stakeholder expectations may result in the loss of business, diluted market valuation, an inability to attract and retain customers or an inability to attract and retain top talent. Likewise, a failure to comply with any current or future ESG reporting requirements, as established by regulators in the U.S., Europe and beyond, may result in the loss of business, regulatory penalties, litigation, and/or reputational damage.

Table of Contents

Competitive environment

Continued and increased competition could adversely affect our business and our results of operations.

We experience competition from ~~suppliers~~companies in other parts of the world that enjoy economic advantages, such as lower labor costs, lower health care costs, lower tariff or tax rates, lower costs associated with legal compliance, and, in some cases, export or raw materials subsidies. In addition, consolidation and vertical integration within the supply base have introduced new or restructured competitors to our markets. Increased competition could adversely affect our business and results of operations.

B.	OPERATIONAL RISKS

Complexities of global presence

We are subject to risks related to our international operations and global customer and supplier base.

We have manufacturing and technical facilities located in North America, South America, Europe, and Asia. Our global operations are subject to complex international laws and regulations and numerous risks and uncertainties, including changes in monetary and fiscal policies, including those related to tax and trade, cross-border trade restrictions or prohibitions, import or export duties or other charges or taxes, fluctuations in foreign currency exchange and interest rates, inflation, changing economic and employment conditions, changes in foreign visitor and immigration policies, public health crises, unreliable intellectual property protection and legal systems, insufficient infrastructures, social unrest, political instability and disputes (including, for example, impacts of the military conflicts ~~in Ukraine~~ and tensions in the Middle East and ~~heightened tension in the Red Sea~~Ukraine), incompatible business practices, and international terrorism.

Changes in policies or laws governing the terms of foreign trade, and in particular increased trade restrictions, tariffs or taxes on imports from countries where we either manufacture products or buy raw materials, such as Mexico, China, and Canada, could have a material adverse impact on our results of operations. Certain of our current manufacturing facilities in Mexico operate under the Mexican Maquiladora (IMMEX) program, which provides for reduced tariffs and eased import regulations. We could be adversely affected by changes in the IMMEX program or our failure to comply with its requirements. Regarding imported goods and raw materials, increased tariffs or taxes on purchases from countries, such as China, could materially impact our results of operations if we cannot effectively source such goods and raw materials from other suppliers in the U.S. or alternative countries. In addition, compliance with multiple and often conflicting laws and regulations of various countries can be challenging and expensive.

Table of Contents

We employ a global workforce, attracting talent from across the globe and employing leaders to manage our sales and production operations across multiple countries. Changes in foreign visitor or immigration policies across the globe could materially impact our results of operations if we cannot effectively hire, recruit and retain talent in our organization, or if such policies impede our leaders from operating a global business.

Embargoes or sanctions imposed by the U.S. government or those abroad that restrict or prohibit sales to or purchases from specific persons or countries or based upon product classification may expose us to potential criminal and civil sanctions to the extent that we are alleged or found to be in violation, whether intentional or unintentional. In connection with the military conflict with Iran, the U.S. government has expanded sanctions against Iran, including entities involved in ~~Ukraine~~Iran’s oil transportation infrastructure and countries that trade with Iran. In addition, governments in the U.S. and abroad have extended and expanded sanctions against Russia and entities known to be supporting Russian interests, including on certain companies located in countries in which we operate, including China, Germany, and Serbia. We do not have manufacturing operations in the Middle East, Ukraine, or Russia, nor any significant business relationships in or associated with Iran, Ukraine or Russia, however we are continuing to monitor the sanctions requirements and reacting as necessary to ensure compliance. We cannot predict future regulatory requirements to which our business operations may be subject or the manner in which existing laws might be administered or interpreted. Significant developments or changes in these regulatory requirements could have a material adverse impact on our results of operations and cash flows.

In addition, the U.S. Foreign Corrupt Practices Act, the U.K. Bribery Act and other similar anti-corruption laws generally prohibit companies and their intermediaries from making payments to improperly influence foreign government officials or other persons for the purpose of obtaining or retaining business. In recent years, there has been a substantial increase in the global enforcement of anti-corruption laws. In the event that we believe our employees or agents may have violated applicable anti-corruption laws, or if we are subject to allegations of any such violations, we may have to expend significant time and financial resources toward the investigation and remediation of the matter, which could disrupt our business and result in a material adverse impact on our financial condition, results of operations and reputation.17

Table of Contents

Challenges of maintaining a competitive cost structure

We may be unable to maintain competitive cost structures.

As we progress towards our vision of a “new” Modine by applying 80/20 principles across our businesses to focus resources on products and markets with the highest sustainable growth opportunities and return profiles, it is imperative that we effectively and efficiently manage our operations in response to sales volume changes. This includes ramping up and maintaining adequate production capacity to meet demand in our growing businesses, ~~while~~particularly ~~also~~in Data Centers, and completing restructuring activities, including ~~targeted~~transferring ~~headcount~~production ~~reductions~~for ~~and~~certain product ~~line~~lines ~~transfers,~~among ~~in order to optimize~~ our ~~manufacturing footprint and cost structure~~facilities, ~~particularly~~to inboth ~~light~~support ~~of changes in~~ our ~~mix~~growth ofinitiatives ~~business~~ and inoptimize ~~areas~~our ~~where~~manufacturing ~~we are strategically refraining from further investments~~footprint.

Our successful execution of these initiatives, and our ability to optimize and maintain competitive cost structures, is critical in sustaining our long-term competitiveness. Any failure to do so could, in turn, adversely affect our results of operations, cash flows and financial condition.

Challenges of technology advantage, product development and product launches

If we cannot differentiate ourselves from our competitors with our technology, our existing and potential customers may seek lower prices and our sales and earnings may be adversely affected.

Our leading-edge technologies, product quality, and the history of our product performance in each of our markets has created our competitive value with our customers. If we fail to be at the forefront of technological advances and cannot differentiate ourselves from our competitors with our technology or fail to provide high quality, innovative and advanced performance products and services that both meet or exceed customer expectations and address their ever-evolving needs, we may experience price erosion, lower sales, and lower profit margins. Significant technological developments by our competitors or others also could adversely affect our business and results of operations.

Table of Contents

Changes in the adoption rate for newer technologies could adversely affect our business.

Changes in or shifts in the adoption rate of technologies or products that we expect to drive future sales growth, including technology related to electric vehicles, could adversely affect our results of operations and financial condition. For example, under the current U.S. administration, there is uncertainty in the marketplace regarding future federal funding related to electrification, and in particular, the adoption of electric vehicles. Government policies and funding legislation in the U.S. and Europe significantly influence the rate of investments in electric vehicles, and the infrastructure necessary for wide-scale adoption of alternative powertrains. If technology adoption rates slow or are significantly delayed, our sales growth in these areas of our business could be limited.

Developments or assertions by or against us relating to intellectual property rights could adversely affect our business.

We own and license significant intellectual property, including a large number of patents, trademarks, copyrights and trade secrets. Our intellectual property plays an important role in maintaining our competitive position in a number of the markets we serve. As we maintain or expand our operations in jurisdictions where the enforcement of intellectual property rights is less robust, the risk of others duplicating our proprietary technologies increases, despite our efforts to protect them. Developments or assertions by or against us relating to intellectual property rights could adversely affect our business and results of operations. Additionally, any inability to acquire or secure intellectual property relating to newer technologies in areas of our business that we expect to drive sales growth could negatively impact our competitive positions in these growth areas of our business.

We regularly launch new products and system designs at our facilities across the world. The success of these launches is critical to our business.

We design technologically advanced products and systems, and the processes and time required to develop, design and produce these products and systems can be lengthy, difficult and complex. We spend significant time and financial resources to ensure the successful launch of new products and programs. Due to our high level of launch activity, we must appropriately manage these activities and deploy our capital and operational and administrative resources to take advantage of the resulting increase in our business. If we do not successfully or timely launch new products, systems and programs, we may lose market share or damage relationships with our customers, which could negatively affect our business. In addition, any failure in our manufacturing strategy for these new products or programs could result in operating inefficiencies or asset impairment charges, which could adversely affect our results of operations.

In addition, vehicular OEM customers often request that we pay for design, engineering and tooling costs that are incurred prior to the start of production and recover these costs through amortization in the piece price of the product. Some of these costs cannot be capitalized, which adversely affects our profitability until the programs for which they have been incurred are launched. If a given program is not launched, or is launched with significantly lower volumes than planned, we may not be able to recover the design, engineering and tooling costs from our customers, further adversely affecting our results of operations.

Table of Contents

We regularly launch new products and system designs at our facilities across the world. The success of these launches is critical to our business and results of operations.

We design technologically advanced products and systems, and the processes and time required to develop, design and produce these products and systems can be lengthy, difficult and complex. We spend significant time and financial resources to ensure the successful launch of new products and programs. Due to our high level of launch activity, we must appropriately manage these activities and deploy our capital and operational and administrative resources to take advantage of the resulting increase in our business. If we do not successfully or timely launch new products, systems and programs, we may lose market share or damage relationships with our customers, which could negatively affect our business and results of operations. In addition, any failure in our manufacturing strategy for these new products or programs could result in operating inefficiencies or asset impairment charges, which could adversely affect our results of operations and cash flows.

Information technology (“IT”) systems

We may be adversely affected by a substantial disruption in, or material breach of, our IT systems or IT systems of our service providers.

We are dependent upon IT infrastructure, including network, hardware, and software systems owned by us and our service providers, to conduct our business. Despite network and other cybersecurity measures we and our service providers have in place, IT systems could be damaged, compromised, or interrupted by intentional or unintentional events or natural disasters. We could also be negatively impacted by a cybersecurity breach from ~~computer viruses~~malware, ransomware, phishing, ~~break-ins~~unauthorized access or similar disruptions. Cybersecurity risk may be heightened by the increased prevalence of hybrid and/or remote work arrangements, mergers, acquisitions and dispositions, rapid business growth activities, and reliance on third-party service providers. Further, the military conflicts in ~~Ukraine and~~ the Middle East and Ukraine, as well as current geopolitical uncertainties involving Russia, Iran and China, among other nations, may increase the threat of cyberattacks on the global financial markets, supply chain, and IT infrastructure, which could directly or indirectly have an adverse impact on our results of operations and cash flows.

A material breach or a substantial disruption in our IT systems for a prolonged time period, or the failure of one or more legacy IT systems no longer supported by service providers, could result in delays in receiving inventory and supplies or filling customer orders. Further, we continue to expand our IT systems to enable our businesses to run more efficiently, including the incorporation of artificial intelligence in certain areas. The increased use of and evolution in advanced technology solutions creates potential risks. A material breach in our IT systems or the improper use of artificial intelligence could result in the release of otherwise confidential information, including personal information that is protected by the General Data Protection Regulation. Any such events and the related delays, problems or costs, including potentially significant remediation expenses and litigation risks, could have material adverse impacts on our business, financial condition, results of operations, business relationships and reputation.

Table of Contents

Environmental, health and safety regulations

We could be adversely impacted by the costs of environmental, health and safety regulations.

Our operations are subject to various federal, state, local and foreign laws and regulations governing, among other things, emissions to air, discharge to waters and the generation, handling, storage, transportation, treatment and disposal of waste and other materials. The operation of our manufacturing facilities entails risks in these areas and there can be no assurance we will avoid material costs or liabilities relating to such matters. Our financial responsibility to clean up contaminated property may extend to previously-owned or used property, properties owned by unrelated companies, as well as properties we currently own and use, regardless of whether the contamination is attributable to prior owners. In addition, potentially material expenditures could be required in order for our products and operations to comply with evolving environmental, health and safety laws, regulations (including those developed as a concern to climate control), or other requirements that may be adopted or imposed in the future. Future costs to remediate contamination or to comply with environmental, health and safety laws and regulations could adversely affect our business, financial condition, results of operations and ~~financial~~cash ~~condition~~flows.

Claims and litigation

We may incur material losses and costs as a result of warranty and product liability claims and litigation or other legal proceedings.

In the event our products or systems fail to perform as expected, weor ~~are~~our ~~exposed~~testing ~~to warranty~~ and ~~product~~quality ~~liability~~control ~~claims~~processes ~~and~~do ~~may~~not bedetect ~~required~~quality toissues ~~participate in a recall~~ or ~~other~~defects, ~~field~~including ~~campaign~~those ofrelated ~~such~~to ~~products. Many~~components ofmanufactured ~~our~~by ~~vehicular~~third ~~customers~~parties, ~~offer~~we ~~extended~~could ~~warranty~~be ~~protection~~exposed ~~for their vehicles and pressure their supply base~~ to ~~extend~~ warranty ~~coverage~~and asproduct ~~well~~liability claims. IfWe ~~our~~could ~~customers~~incur ~~demand~~significant ~~higher~~expenses ~~warranty-related~~associated ~~cost~~with ~~recoveries~~the recall, repair, and/or ifreplacement of our products. In ~~fail to perform as expected~~addition, itwe could ~~have~~incur asignificant ~~material~~expenses ~~adverse~~resulting ~~effect~~from onproduct ~~our~~liability ~~results~~claims, ofincluding ~~operations~~for ~~and~~personal ~~financial~~injury ~~condition~~or property damage. WeAny ~~are~~such ~~also~~incidents ~~involved~~could inrequire ~~various~~significant ~~legal proceedings from~~ time toand ~~time~~resources ~~incidental~~ to ~~our business~~resolve. IfProduct ~~any~~warranty ~~such~~and ~~proceeding~~liability ~~has~~claims acould ~~negative~~have ~~result,~~a itmaterial ~~could~~adverse ~~adversely~~effect ~~affect~~on our ~~business~~financial condition, results of operations, ~~financial~~cash ~~condition~~flows and reputation.

19We are also involved in various legal proceedings from time to time incidental to our business. If any such proceeding has a negative result, it could adversely affect our business, financial condition, results of operations, cash flows and reputation.

Table of Contents

C.	STRATEGIC RISKS

~~Business~~Pending ~~optimization~~Reverse ~~and~~Morris ~~growth~~Trust ~~strategies~~transaction

The pending Reverse Morris Trust transaction with Gentherm is subject to various risks and uncertainties. There can be no assurance that it will be completed on the terms and timeline planned, if at all, and it will result in significant costs to the Company.

The pending spin-off of our Performance Technologies segment businesses and simultaneous combination with Gentherm may not be completed as currently planned. Completion of the Reverse Morris Trust transaction is subject to the satisfaction or waiver of a number of conditions, including the approval of Gentherm’s shareholders and regulatory approvals. There can be no assurance that we will receive the required approvals in a timely manner or at all. The completion of the pending Reverse Morris Trust transaction is also subject to obtaining opinions and a private letter ruling from the IRS regarding its qualification as a tax-free transaction for U.S. federal income tax purposes. In addition, we may experience greater than expected difficulties in separating the Performance Technologies segment businesses from our other businesses. Any significant delays in completing the transaction may increase the amount of fees and resources spent on the transaction and the risk that it may not be completed. We have and will continue to incur costs related to the transaction, including legal, accounting, tax, and other professional fees, whether or not the transaction is completed. If the transaction is not completed or not completed in the timeframe expected, our business, financial results and market price of our shares could be adversely affected.

Table of Contents

We are subject to risks and uncertainties while the Reverse Morris Trust transaction with Gentherm is pending.

Uncertainties regarding the impacts of the pending Reverse Morris Trust transaction with Gentherm on our employees, customers, and suppliers could adversely affect our business and results of operations. Our employees may be distracted due to uncertainty regarding their future roles and we may face challenges in attracting, retaining and motivating key employees. Our suppliers or customers may delay or defer decisions or may terminate their relationships with us or our Performance Technologies segment businesses, which could adversely affect our sales, results of operations, and cash flows. Further, the pending transaction will require significant time and attention from management, which could detract from other business concerns.

In addition, potential shareholder litigation in connection with the pending transaction or other litigation, settlements or investigations may affect the timing or occurrence of the pending transaction or result in significant costs of defense, indemnification and liability.

We may be unable to achieve some or all of the anticipated benefits from the pending Reverse Morris Trust transaction with Gentherm.

We may not achieve the financial and operational benefits expected from the pending Reverse Morris Trust transaction. The transaction might not provide us and our shareholders benefits or value in excess of what might have been realized had we retained the Performance Technologies segment businesses or undertaken a different strategic alternative.

Following the spin-off and merger with Gentherm, our remaining company will be less diversified, with a more concentrated focus on the data center and commercial HVAC&R markets. As a result, we will be more vulnerable to changing market conditions in these markets, including risks related to the concentration of demand among a limited number of large customers or projects, which could adversely affect our business, results of operations, cash flows and financial condition.

There can be no assurance as to the value of the shares of the combined company to be received by our shareholders in the pending Reverse Morris Trust transaction with Gentherm.

At the time of the spin-off of the Performance Technologies segment businesses, our shareholders are expected to receive newly-issued Gentherm stock, representing ownership of approximately 40 percent of the combined company. The actual value of the stock to be received by our shareholders will depend on the value of such shares at the time of transaction closing. Following the merger, the combined company could face difficulties in integrating the businesses, or the combined company could experience difficulties or delays in achieving anticipated revenue and cost synergies or other expected operational and financial benefits. As a result, our shareholders may not receive the benefits anticipated from the transaction.

Business growth and optimization strategies

We are strategically focused on growing our Data Centers business. We may not realize the sales growth anticipated to data center customers.

We are making significant investments to support the growth of our Data Centers business. We have been rapidly expanding manufacturing capacity for data center products, including leasing new manufacturing facilities in the U.S. and in Canada and purchasing equipment necessary for new and expanded production lines. The success of our Data Centers business relies on the growth of our current and prospective customers’ data centers. If the anticipated growth in data center infrastructure does not materialize due to changes in the economy, obstacles related to the availability of power and land resources, changes in the reliance on digital technologies, or other factors, we may not realize the sales growth and the return on our investments that we anticipate.

Table of Contents

In addition, we recently entered into a long-term capacity agreement with one of our strategic data center customers, with whom we are party to a confidentiality agreement. In connection with this capacity agreement, we received a $165 million up-front deposit from the customer to support investments necessary to meet the planned sales volume. We expect to sell more than $4 billion of data center cooling products to this customer during calendar years 2027 through 2029. However, there can be no assurance that this customer will purchase the amounts projected. If this customer or other data center customers terminate, reduce, or defer orders, we may not realize the sales growth anticipated to data center customers and our results of operations and cash flows could be adversely impacted.

Our business strategy includes acquisitions and dispositions. We may be unable to identify, execute, and successfully integrate acquisitions or successfully execute strategic business dispositions.

Under our strategy based on 80/20 principles, we are focused on acquiring businesses and investing in technologies that we expect to accelerate our strategic growth in select markets. If we are unable to successfully execute on further organic growth opportunities or complete acquisitions in the future, our growth may be limited. There can be no assurance we will be able to identify and complete the purchase of ~~additional~~ attractive acquisition targets, including obtaining financing, if necessary, to facilitate such transactions. Future acquisitions will require integration of operations, sales and marketing, information technology, finance, and administrative functions. If we are unable to successfully integrate future acquisitions into our existing operations, capitalize on expected market share or revenue gains, realize anticipated cost or revenue synergies, or operate any acquired businesses profitably, we may not achieve the financial or operational success expected. In addition, future acquisitions could include the issuance of shares of our common stock as all or a portion of the consideration paid to the sellers. Any such issuance of shares would be dilutive to the interests of our existing shareholders and may adversely affect the market price of our shares.

We may also seek to sell or otherwise exit portions of our business that do not align with our strategic plan. Business dispositions involve risks and uncertainties, and we may be unable to sell or exit such businesses on terms satisfactory to us and within a desired time frame. Risks include potential significant costs and expenses, the loss of customer relationships, and the diversion of management’s attention from other business concerns. Further, any continued financial involvement in the disposed business, such as through guarantees, indemnities, or other financial obligations, could adversely impact our business, financial condition, results of operations and cash flows.

D.	FINANCIAL RISKS

Liquidity and access to cash

Our indebtedness may limit our use of cash flow to support operating, development and investment activities, and failure to comply with our debt covenants could adversely affect our liquidity and financial results.

As of March 31, ~~2025~~2026, we had total outstanding indebtedness of $~~351~~436 million. Our indebtedness and related debt service obligations (i) require that a certain portion of cash flow from operations be used for principal and interest payments, which reduces the funds we have available for other business purposes; (ii) limit our flexibility in planning for or reacting to changes in our business and market conditions; and (iii) expose us to interest rate risk, since the majority of our debt obligations carry variable interest rates.

Our credit agreements contain financial covenants that, among other things, require us to maintain a minimum interest coverage ratio and impose a maximum leverage ratio. Failure to comply with debt covenants could result in an event of default, which, if not cured or waived, could result in us being required to repay these borrowings before their due date. If we are forced to refinance these borrowings on less favorable terms, our results of operations and financial condition could be adversely affected by increased costs and interest rates.

Table of Contents

Goodwill and intangible assets

Our balance sheet includes significant amounts of goodwill and intangible assets. An impairment of a significant portion of these assets would adversely affect our financial results.

Our balance sheet includes goodwill and intangible assets totaling $~~381~~489 million at March 31, ~~2025~~2026. We perform goodwill impairment tests annually, as of the end of February, or more frequently if business events or other conditions exist that require a more frequent evaluation. In addition, we review intangible assets for impairment whenever business conditions or other events indicate that the assets may be impaired. If we determine the carrying value of an asset is impaired, we write down the asset to fair value and/or record an impairment charge to current operations.

We use judgment in determining if an indication of impairment exists. For our annual goodwill impairment tests, we use estimates and assumptions, including revenue growth rates and operating profit margins to calculate estimated future cash flows and risk-adjusted discount rates. We cannot predict the occurrence of future events or circumstances, including lower than forecasted revenues, market trends that fall below our current expectations, actions of key customers, increases in discount rates, and ~~the continued~~ general economic uncertainties, which could adversely affect the carrying value of goodwill and intangible assets. An impairment of a significant portion of goodwill or intangible assets could adversely impact our results of operations.

Income taxes

We may be subject to additional income tax expense or become subject to additional tax exposures.

Our effective tax rates in the future may be impacted by changes in the mix of earnings in countries with differing statutory rates and changes in tax laws, or their interpretation. The subjectivity of or changes in tax laws and regulations in jurisdictions where we operate could materially affect our results of operations and financial condition. For example, the Organization for Economic Cooperation and Development (“OECD”) has issued significant global tax policy changes. In October 2021, the OECD and G20 Finance Ministers reached an agreement, known as Base Erosion and Profit Shifting Pillar Two (“Pillar Two”), that, among other things, provides that income earned in each jurisdiction that a multinational company operates in is subject to a minimum corporate income tax rate of at least 15 percent. Discussions related to the formal implementation of Pillar Two, including with respect to the tax law of each member jurisdiction, including the United States, are ongoing. Enactment of this regulation could result in an increase in our income tax expense and adversely impact our results of operations, cash flows and financial condition. We are also subject to tax audits in each jurisdiction in which we operate. Unfavorable or unexpected outcomes from one or more tax audits could adversely affect our results of operations, cash flows and financial condition.

In addition, as of March 31, ~~2025~~2026, our net deferred tax assets totaled $4360 million. Each quarter, we evaluate the probability that our deferred tax assets will be realized and determine whether valuation allowances or adjustments thereto are needed. This determination involves judgment and the use of significant estimates and assumptions, including expectations of future taxable income and tax planning strategies. Future events or circumstances, such as lower taxable income or unfavorable changes in the financial outlook of our operations in certain jurisdictions, could require us to establish further valuation allowances, which could negatively impact our results of operations and financial condition.

2123

Table of Contents

E.	GENERAL RISKS

Customers and markets

We are dependent upon the health of the customers and markets we serve.

We are highly susceptible to unfavorable trends or disruptions in the markets we serve, as our customers’ financial condition and performance are affected by demand for their goods or services, regulatory initiatives and incentives and general economic conditions, including supply chain challenges, access to credit, the price of fuel and electricity, employment levels and trends, interest rates, labor relations issues, regulatory requirements and incentives, technology demands and advancements, government-imposed restrictions relating to health crises or other ~~unusual~~ events, trade agreements and other market factors, as well as by customer-specific issues. Any significant decline in demand for our products and solutions, including those driven by end-market demands or demand for our customer’s products or services, by current and future customers could result in asset impairment charges and a reduction in our sales, thereby adversely impacting our results of operations, cash flows and financial condition.

Exposure to foreign currencies

As a global company, we are subject to foreign currency rate fluctuations, which affect our financial results.

Although our financial results are reported in U.S. dollars, a significant portion of our sales and operating costs are realized in foreign currencies. Our sales and profitability are affected by movements of the U.S. dollar against foreign currencies in which we generate sales and incur expenses. To the extent that we are unable to match sales in foreign currencies with costs paid in the same currency, exchange rate fluctuations in any such currency could have an adverse effect on our financial results. During times of a strengthening U.S. dollar, our reported sales and earnings from our international operations will be lower because the applicable local currency will be translated into fewer U.S. dollars. In certain instances, currency rate fluctuations may create pricing pressure relative to competitors quoting in different currencies, which could result in our products becoming less competitive. Significant long-term fluctuations in relative currency values could have an adverse effect on our results of operations and financial condition.

Attracting and retaining talent

Our future success is dependent on our ability to attract, develop and retain qualified personnel.

Our ability to sustain and grow our business requires us to hire, develop, and retain skilled and diverse personnel throughout our organization. We depend significantly on the engagement of our employees and their skills, experience and industry knowledge to support our objectives and initiatives, and have attracted a leadership team executing on strategic initiatives informed by our 80/20 mindset. Our ability to achieve our operating and strategic goals depends on our ability to identify, hire, train and retain talented personnel, including our leadership team. We compete with other companies for talented personnel in the locations and labor markets in which we operate, all of which are very competitive, and we may lose key personnel or fail to attract other talented personnel, including at our manufacturing locations. Any prolonged labor shortages or significant employee turnover could negatively impact productivity and result in increased labor costs, such as increased overtime to meet demand or increased wage rates necessary to attract and retain employees. Overall, difficulty in attracting, developing, and retaining qualified personnel could adversely affect our business and results of operations.

ITEM 1B. UNRESOLVED STAFF COMMENTS.

None.

2224

Table of Contents

ITEM 1C. CYBERSECURITY.

Cybersecurity Risk Management and Strategy

We have an established framework for assessing, identifying, and mitigating cybersecurity and information security risks. The processes we employ under this framework are part of our overall risk management strategy, as overseen by our Board of Directors, and are aimed at enhancing the security of our information systems, software, networks, and the protection or privacy of our data. We have based our management of cybersecurity risk upon recognized cybersecurity industry frameworks, including those of the National Institute of Standards and Technology and internal risk assessments. We periodically engage third parties, including consulting firms with expertise in IT risk management, to evaluate our cybersecurity risk management processes and potential cybersecurity threats to our company. We also conduct security assessments for new vendors and third-party service providers and have monitoring procedures to mitigate risks related to data breaches or other security incidents originating from third parties.

Governance

Board of Directors

Our Board of Directors has oversight responsibility for cybersecurity risk management. As part of its oversight activities, the Board regularly receives written updates regarding cybersecurity and information technology risks and management’s response to them from our Vice President, Chief Information Officer (“CIO”) and our Chief Information Security Officer (“CISO”). Additionally, the Board of Directors meets with the CIO and CISO to discuss matters of IT and information technology governance strategy, as well as cybersecurity, data and IT system risk management. The Board of Directors has designated two of its members to serve as primary board liaisons with management regarding matters of cybersecurity. In the event of a potentially material cybersecurity incident, these designated cybersecurity liaisons will meet with the management incident response team to review the cybersecurity event, a materiality analysis, and, if appropriate, any information to be disclosed in a Current Report on Form 8-K. The full Board of Directors will also receive information regarding any material cybersecurity incident, with the Board liaisons helping to facilitate efficient communications between management and the full Board in advance of any necessary Form 8-K filing.

Management

~~Our~~The CISO ~~leads~~is ~~our~~responsible for the management of cybersecurity risks and our incident response plan. ~~Our~~The CISO coordinates with legal counsel and third parties, as applicable, in assessing and managing cybersecurity risks. ~~Our CISO has more than nine years of experience in leading global security functions and strategies for Modine and similar global companies.~~ The ~~CISO reports to our~~ CIO ~~who, in turn, reports to our Executive Vice President~~ and ~~Chief Financial Officer. Our CIO and~~ CISO regularly provide updates to our Board of Directors regarding cybersecurity and information technology matters, including cybersecurity threats and our risk management strategy.

Our former CISO, who had more than ten years of experience in leading global security functions and strategies, departed in May 2026. Our CIO, who has more than twenty years of information technology and security leadership experience, has assumed the CISO responsibilities, on an interim basis, until a new CISO is appointed and onboarded. The new CISO will report to our CIO who, in turn, reports to our Executive Vice President and Chief Financial Officer.

We maintain a cybersecurity incident response process to analyze, contain, eradicate, and recover from cybersecurity incidents. The incident response process includes an escalation protocol, wherein our CISO raises any cybersecurity incidents that could potentially be material to our business, operations, or financial condition to a cross-functional management incident response team. This management incident response team is comprised of members of our senior leadership team, including, but not limited to, our Chief Executive Officer, Chief Financial Officer, General Counsel and Chief Compliance Officer, and CIO. In addition, depending on the circumstances of any cybersecurity incident, third-party advisors may be engaged to assist in the investigation and response.

Additionally, we have implemented an Information Security Risk Management Framework, ~~(“RMF”)~~ which is a strategy for protecting the Company, the Board of Directors, employees, and other stakeholders from unnecessary information security injuries, losses or damage. The framework further establishes the context for assessing information security risks, managing those risks and making risk-based decisions through the information security lifecycle. Among other tools that we use to proactively manage information security risk to the organization, the RMF includes a vendor risk assessment process that is used to assess any new vendor being considered for use within Modine.

2325

Table of Contents

As part of our proactive information security risk management, we evaluate cybersecurity risks related to third party service providers through due diligence, risk based assessments, and ongoing monitoring.

We also provide cybersecurity training to our workforce to properly equip our employees to identify and report cybersecurity incidents. The training programs highlight areas such as the protection of confidential information, phishing attacks, and emerging cybersecurity threats and best practices.

At this time, we are not aware of any cybersecurity incidents that have materially affected or are reasonably likely to materially affect our company, including our business strategy, results of operations, or financial condition. For further discussion of the risks associated with potential future cybersecurity incidents, see the risk factor regarding cybersecurity in the section entitled “Item 1A. Risk Factors.”

ITEM 2. PROPERTIES.

We operate manufacturing facilities in the U.S. and in ~~multiple~~numerous foreign countries. Our world headquarters, including general offices and laboratory, experimental and prototype facilities, is located in Racine, Wisconsin. We have additional technical support functions located in Grenada, Mississippi; Allen, Texas; Leeds, United Kingdom; Pocenia, Italy; Guadalajara, Spain; Söderköping, Sweden; Mezökövesd, Hungary; Sao Paulo, Brazil; Changzhou, China; and Chennai, India.

The table below summarizes the number of manufacturing facilities within each of our operating segments as of March 31, ~~2025~~2026. Twenty-~~one~~five of these facilities include leased manufacturing space.


	Americas	Europe	Asia	Total
Climate Solutions	1017	109	2	2228
Performance Technologies	87	5	6	1918
Total manufacturing facilities	1824	1514	8	4146

In addition to the manufacturing facilities summarized in the table above, we also operate four coatings facilities in North America and Europe, which primarily enhance customer-owned products with coatings solutions and operate at a smaller scale than our other manufacturing facilities.

We consider all of our facilities and equipment to be well maintained and suitable for their purposes. We review our manufacturing capacity regularly and make the determination as to our need to expand or, conversely, rationalize our facilities as necessary to meet changing market conditions and our operating needs.

ITEM 3. LEGAL PROCEEDINGS.

The information required hereunder is incorporated by reference from Note 20 of the Notes to Consolidated Financial Statements.

ITEM 4. MINE SAFETY DISCLOSURES.

Not applicable.

2426

Table of Contents

INFORMATION ABOUT OUR EXECUTIVE OFFICERS.

The following sets forth the name, age (as of March 31, ~~2025~~2026), business experience during at least the last five years, and certain other information relative to each executive officer of the Company.

Name	Age	Position
Brian J. Agen	5657	Vice President, Chief Human Resources Officer (with a title change from Vice President, Human Resources) (October 2012 – Present).

Neil D. Brinker	4950	President and Chief Executive Officer (December 2020 – Present). Prior to joining Modine, Mr. Brinker served as President and Chief Operating Officer of Advanced Energy Industries, Inc. (June 2020 – December 2020) after serving as its Executive Vice President and Chief Operating Officer (June 2018 – June 2020).

Michael B. Lucareli	5657	Executive Vice President, Chief Financial Officer (May 2021 – Present); previously Vice President, Finance and Chief Financial Officer for the Company (July 2010 – May 2021).

Eric S. McGinnis	5455	President, Climate Solutions (April 2022 – Present); previously Vice President, Building HVAC upon joining Modine in August 2021. Prior to joining Modine, Mr. McGinnis served as President, Industrial Systems at Regal Beloit (March 2017 – August 2021).

Erin J. Roth	49	Vice President, General Counsel and Chief Compliance Officer (November 2023 – Present). Prior to joining Modine, Ms. Roth served in a General Counsel and Corporate Secretary capacity for U.S. publicly traded companies, including with Infrastructure & Energy Alternatives, Inc. (now a subsidiary of MasTec, Inc.) (June 2021 – May 2023) and Wabash National Corporation (January 2007 – December 2017), as well as with the U.S. not-for-profit, Strada Education Network (now Strada Education Foundation) (December 2017 – May 2021).
Jeremy M. Patten	46	President, Performance Technologies (September 2025 – Present). Prior to joining Modine, Mr. Patten served as President, Packaging and Food Technology Group at ATS Corporation (January 2020 – September 2025) after serving as its Vice President, ATS Business Model (August 2017 – January 2020).

Erin J. Roth	50	Vice President, General Counsel and Chief Compliance Officer (November 2023 – Present). Prior to joining Modine, Ms. Roth served in a General Counsel and Corporate Secretary capacity for U.S. publicly traded companies, including with Infrastructure & Energy Alternatives, Inc. (now a subsidiary of MasTec, Inc.) (June 2021 – May 2023) and Wabash National Corporation (January 2007 – December 2017), as well as with the U.S. not-for-profit, Strada Education Network (now Strada Education Foundation) (December 2017 – May 2021).

Executive officer positions are designated in our Bylaws and the persons holding these positions are elected annually by the Board. In addition, the Human Capital and Compensation Committee of the Board may recommend and the Board of Directors may approve promotions and other actions with regard to executive officers at any time during the fiscal year.

There are no family relationships among the executive officers and directors. There are no arrangements or understandings between any of the executive officers and any other person pursuant to which he or she was elected an officer of Modine.

Table of Contents

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

Our common stock is listed on the New York Stock Exchange. Our trading symbol is MOD. As of March 31, ~~2025~~2026, shareholders of record numbered 1,~~797~~711.

We did not pay dividends during fiscal ~~2025~~2026 or ~~2024~~2025. Under our credit agreements, we are permitted to pay dividends on our common stock, subject to certain restrictions based upon the calculation of debt covenants, as defined in our credit agreements. We currently do not intend to pay dividends in fiscal ~~2026~~2027.

The following describes the Company’s purchases of common stock during the fourth quarter of fiscal ~~2025~~2026:


					Maximum
					Number (or
				Total Number of	Approximate Dollar
				Shares Purchased	Value) of Shares
		Average		as Part of Publicly	that May Yet Be
	Total Number of	Price Paid		Announced Plans	Purchased Under the
Period	Shares Purchased	Per Share		or Programs	Plans or Programs (a)
January 1 - January 31, 2025	1,364 (b)	$	121.55	—		—
January 1 - January 31, 2026	222 (b)	$	134.34	—	$	81,600,955

February 1 - February 28, 2025	—		—	—		—
February 1 - February 28, 2026	—		—	—	$	81,600,955

March 1 - March 31, 2025	230,470 (b) (c)	$	80.01	230,000		$ 81,600,955
March 1 - March 31, 2026	876 (b)	$	216.71	—	$	81,600,955

Total	~~231~~1,~~834~~098	$	80200.2606	~~230,000~~—
____

(a)	Effective March 7, 2025, the Company’s Board of Directors authorized the Company to repurchase up to $100 million of Modine common stock at such times and prices that it deems to be appropriate. This share repurchase authorization does not expire.

(b)

Includes shares delivered back to the Company by employees and/or directors to satisfy tax withholding obligations that arise upon the vesting of stock awards. The Company, pursuant to its equity compensation plans, gives participants the opportunity to turn back to the Company the number of shares from the award sufficient to satisfy tax withholding obligations that arise upon the termination of restrictions. These shares are held as treasury shares.

2628

Table of Contents

PERFORMANCE GRAPH

The following graph compares the cumulative five-year total return on our common stock with similar returns on the Standard & Poor’s (S&P) 500 Index, the Russell 2000 Index, and the ~~Standard~~ S&P ~~Poor~~MidCap 400 Industrials Index. Based upon the Company’s (higher market capitalization compared with the prior year, the Company determined that the S&P) ~~MidCap~~500 ~~400~~Index ~~Industrials~~was more representative of its business and plans to replace the Russell 2000 Index for purposes of this graph beginning in fiscal 2027. The graph assumes a $100 investment and reinvestment of dividends. The return shown on the graph is not necessarily indicative of future performance.


					Indexed Returns
		Initial Investment			Years ended March 31,
Company / Index		March 31, 2021			2022			2023			2024			2025			2026
Modine Manufacturing Company		$	100		$	61.00		$	156.06		$	644.48		$	519.63		$	1,467.23
S&P 500 Index			100			115.65			106.71			138.59			150.03			176.74
Russell 2000 Index			100			94.21			83.28			99.69			95.70			120.32
S&P MidCap 400 Industrials Index			100			104.34			108.59			146.99			135.97			178.19


			Indexed Returns
	Initial Investment		Years ended March 31,
Company / Index	March 31, 2020		2021		2022		2023		2024		2025
Modine Manufacturing Company	$	100	$	454.46	$	277.23	$	709.23	$	2,928.92	$	2,361.54
Russell 2000 Index		100		194.85		183.57		162.27		194.25		186.46
S&P MidCap 400 Industrials Index		100		187.57		195.72		203.69		275.71		255.04

ITEM 6. RESERVED.

Table of Contents

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

Overview

At Modine, we are Engineering a Cleaner, Healthier World ™. Our mission is to use our thermal management expertise to help our customers improve indoor air quality, reduce energy and water consumption, lower harmful emissions, enable cleaner running vehicles, and use more environmentally friendly refrigerants. We operate in four continents, in 16numerous countries, and employ approximately 1113,~~300~~200 persons worldwide.

We sell customer-centric thermal management solutions in a wide array of commercial, industrial, and building HVAC&R markets. In addition, we are a leading provider of engineered heat transfer systems and high-quality heat transfer components for use in on- and off-highway OEM vehicular applications. Our primary product groups include i) ~~data~~Data ~~center cooling~~Centers; ii) ~~heat~~Heat ~~transfer~~Transfer Solutions; iii) HVAC&R Technologies; iv) ~~air~~Heavy-~~cooled;~~Duty ~~v) liquid-cooled~~Equipment; and viv) ~~advanced~~On-Highway ~~solutions~~Applications.

Company Strategy

~~In fiscal 2025, we continued our strategic transformation.~~ We first announced our vision for a “new” Modine in late fiscal 2021. Over the last ~~four~~five fiscal years, we have simplified and re-segmented our organization and have aligned resources around specific strategies and market-based verticals. Our leadership and teams have embraced 80/20 principles and have created a high-performance culture that focuses resources on products and markets with the highest sustainable growth opportunities and best return profiles, while simplifying and improving our processes. ~~We have strategically expanded our Data Center Cooling and Indoor Air Quality businesses.~~ Through initiatives based upon 80/20 principles, we have achieved significant improvements in our profit margins since we started our transformational journey.

~~Entering~~In fiscal 2026, we ~~are~~continued ~~committed to~~ our strategic ~~pillars to drive value creation~~transformation. WeFollowing ~~aim~~our to80/20 ~~capitalize~~discipline, onwe ~~our~~significantly ~~expertise~~expanded inour ~~thermal~~Data ~~management~~Centers tobusiness ~~provide~~and ~~differentiated~~production ~~solutions~~capacity ~~and~~to ~~sustain~~meet ~~market~~increasing ~~leadership~~customer demand. We ~~are~~see ~~focused~~great onopportunity ~~leveraging~~in growing our ~~product~~Data ~~portfolio~~Centers tobusiness ~~accelerate~~in ~~growth,~~light ~~with~~of ~~particular~~trends ~~focus~~in ~~on long~~high-~~term~~performance ~~growth~~computing, ~~drivers~~with ~~tied~~significant todata ~~secular~~center ~~mega-trends. We~~growth ~~will~~fueled ~~continue~~by toincreased ~~elevate~~AI ~~our~~usage. In ~~80/20~~addition, ~~discipline~~we ~~throughout~~acquired ~~our~~three businesses ~~and~~during ~~use~~fiscal ~~80/20~~2026, toAbsolutAire, ~~guide~~L.B. ~~our~~White, ~~daily~~and ~~decision~~Climate ~~making. Finally~~by Design, wewhich ~~will~~contributed ~~continue~~ to ~~evolve~~growth in our ~~portfolio~~HVAC toTechnologies ~~compound shareholder value~~business. AsIn weJanuary ~~continue on our strategic transformation~~2026, we ~~expect~~entered tointo ~~change~~definitive ~~our~~agreements ~~mix~~with ofGentherm, ~~business. We~~whereby ~~are~~we ~~growing~~will ~~our~~spin-off ~~data~~and ~~center~~simultaneously ~~cooling,~~combine ~~heating~~our ~~and~~Performance ~~indoor~~Technologies ~~air~~segment ~~quality~~ businesses, ~~for~~with ~~example,~~Gentherm ~~while~~in ~~strategically~~a ~~deemphasizing~~Reverse ~~others~~Morris Trust transaction. ~~Most notably~~Gentherm, wea ~~are~~Michigan-based ~~working~~corporation, ~~towards~~is ~~exiting~~a ~~our~~global ~~automotive~~leader ~~business~~of ~~since~~innovative itthermal ~~does~~management ~~not~~and ~~align~~pneumatic ~~with~~comfort ~~our transformation goals~~technologies. WeThis ~~expect~~transaction, ~~these~~which ~~changes~~we expect will ~~fuel~~close ~~improvements~~by inthe ~~both~~end ~~profit~~of ~~margins~~calendar ~~and cash flows~~2026, ~~all~~will ~~while~~transform ~~supporting~~ our ~~customers~~company ~~with~~into ~~innovative~~a ~~and~~pure-play ~~environmentally~~climate ~~responsible~~solutions ~~thermal~~company ~~management~~focused ~~solutions~~on tothe ~~succeed~~data incenter ~~the~~and ~~ever-changing~~commercial ~~global~~HVAC&R ~~marketplace~~markets.

Entering fiscal 2027, we are committed to executing our strategic priorities, including further expanding our Data Centers business and completing the transaction with Gentherm. We will continue to apply our strategic pillars across our businesses to drive value creation. We aim to capitalize on our expertise in thermal management to provide differentiated solutions and sustain market leadership. We are focused on leveraging our product portfolio to accelerate growth, with particular focus on long-term growth drivers tied to secular mega-trends. We will continue to elevate our 80/20 discipline throughout our businesses and use 80/20 to guide our daily decision making. Finally, we will continue to evolve our portfolio to increase shareholder value.

Table of Contents

Development of New Products and Technology

Every day, we leverage our technical expertise, building on more than 100 years of excellence in thermal management, to advance our purpose. We are dedicated to utilizing technology and solutions with sustainable impacts. Our ability to provide customizable solutions to meet the ever-evolving needs of our customers is one of our greatest competitive strengths.

Table of Contents

We partner with our customers and use a systems-based approach to ensure our solutions work seamlessly with their other components. Our thermal solutions enable our customers to stay ahead of new and emerging regulations, particularly those involving increasingly stringent energy efficiency, emissions, and fuel economy standards.

We maintain numerous state-of-the-art technology centers, dedicated to the development and testing of products and technologies. The technology centers are located in Racine, Wisconsin; Grenada, Mississippi; Allen, Texas; Leeds, United Kingdom; Pocenia, Italy; Söderköping, Sweden; Mezökövesd, Hungary; and Sao Paulo, Brazil. Customers know our reputation for innovation and rely on Modine to provide high quality products and technologies.

Strategic Planning and Corporate Development

We employ both short-term (one-to-three year) and longer-term (five-to-seven year) strategic planning processes, which enable us to continually assess our opportunities, competitive threats, and economic market challenges.

We devote significant resources to global strategic planning and development activities to strengthen our competitive position. During fiscal ~~2025~~2026, we ~~integrated~~significantly ~~Scott~~expanded ~~Springfield~~production ~~Manufacturing,~~capacity ain ~~leading~~our ~~manufacturer~~Data ofCenters ~~air~~business ~~handling~~and ~~units~~integrated ~~serving~~three ~~customers~~acquired inbusinesses, ~~the~~AbsolutAire, UL.SB. White, and ~~Canada~~Climate by Design, into our ~~Modine~~Climate ~~businesses~~Solutions segment. We will continue to pursue growth opportunities, particularly to grow our global, market leading positions in the data center ~~cooling~~ and commercial HVAC&R markets. We have provided our ~~general~~businesses ~~managers~~ with the tools that they need to be successful, including dedicated resources to create an entrepreneurial environment and to challenge the status quo.

Operational and Financial Discipline

We are using 80/20 principles to guide our path forward toward commercial excellence. Through closely analyzing our customer and product data, we are focusing our commercial and operational actions in areas that drive increased profitability and also in areas requiring improvement. Our Climate Solutions and Performance Technologies segments have embraced the tenets of 80/20 and are driving transformative change.

Our fiscal ~~2025~~2026 annual cash incentive plan for our management team was based upon two performance metrics: growth in net earnings before interest, taxes, depreciation, amortization, and certain other adjustments (“Adjusted EBITDA”) and Adjusted EBITDA ~~margin~~ as a percentage of net sales. The incentive plan’s performance goals were established for each operating segment as well for the consolidated Company. In addition, we provide a long-term incentive compensation plan for officers and certain key leaders throughout our organization to attract, retain, and motivate these employees who are responsible for driving the long-term success of our ~~Company~~company. The fiscal ~~2025~~2026 plan is comprised of performance-based share awards and restricted stock awards. The performance-based awards for the fiscal ~~2025~~2026 through ~~2027~~2028 performance period are based upon a target three-year average growth in Adjusted EBITDA and a target three-year average cash flow return on invested capital.

Segment Information – Strategy, Market Conditions and Trends

Each of our operating segments has separate strategic and financial plans. Segment financial results are reviewed by our CODM. These plans and results are used by our CODM to evaluate the performance of each segment and to make decisions on the allocation of resources.

Table of Contents

Effective April 1, 2026, we reorganized our Climate Solutions ~~(55~~segment ~~percent~~and ofsplit ~~fiscal~~it ~~2025~~into ~~net~~two ~~sales~~separate operating segments: 1) Data Centers and 2) Commercial HVAC. We believe that managing these businesses independently will allow us to better deploy our 80/20 strategy focused on capitalizing on growth opportunities, particularly in our Data Centers business, and optimizing profit margins and cash flow.

~~Our~~ Climate Solutions ~~segment~~(65 ~~provides~~percent ~~energy-efficient, safe, climate-controlled solutions and components for a wide range~~ of ~~critical~~fiscal ~~applications. The~~2026 ~~Climate~~net Solutions segment sells data center cooling solutions, heat transfer products, and HVAC&R products to customers in North America, EMEA, and Asia. Data center cooling solutions, which are integrated with system controls, include air- and liquid-cooled chillers, CRAC and CRAH units, fan walls, and CDUs. Heat transfer products include heat exchanger coils used in commercial, industrial, and residential HVAC&R applications and coating products and application services that extend the life of equipment and components by protecting against corrosion. HVAC&R products include commercial and residential unit heaters, vertical and horizontal unit ventilators, air conditioning chillers, low global warming potential unit coolers, air-cooled condensers, and dry coolers. We sell our products and solutions both directly to commercial and industrial OEM and end user customers and through wholesalers, distributors, consulting engineers, contractors and data center operators for applications such as data centers, schools, greenhouses, healthcare systems, warehouses, residential garages, manufacturing facilities, and other commercial and industrial applications.sales)

~~During~~Our ~~fiscal 2025,~~ Climate Solutions segment ~~sales~~provides ~~increased~~energy-efficient, ~~$333~~climate-controlled ~~million~~solutions and components for a wide range of applications, orincluding 30data ~~percent~~centers, ~~compared~~schools, ~~with~~greenhouses, ~~the~~healthcare ~~prior year~~systems, ~~primarily~~warehouses, ~~driven~~residential bygarages, ~~higher~~manufacturing ~~sales~~and ofconstruction sites, poultry and swine facilities, and other commercial and industrial applications. The Climate Solutions segment sells data center, ~~cooling~~heat transfer solutions, and HVAC&R technologies products, ~~partially~~to ~~offset~~customers byin ~~lower~~North ~~sales~~America, ofEMEA, ~~heat~~and ~~transfer~~Asia ~~products~~Pacific. WeData ~~are~~center ~~seeing~~products ~~the~~include ~~benefits~~chillers, ofdry ~~our~~coolers, ~~strategic~~precision ~~growth~~air ~~initiatives~~handling units, ~~particularly~~CRAC ~~within~~and ~~our~~CRAH ~~Data~~units, ~~Center~~fan ~~Cooling~~walls, ~~business~~rear-door heat exchangers, CDUs, and immersion solutions. ~~The~~In ~~increase~~addition, inthe ~~sales~~Data ofCenters business sells modular data center solutions, replacement parts, maintenance service and control solutions for existing equipment and new building management controls and systems. Heat transfer solutions include heat exchanger coils, anti-corrosion coating products, commercial and industrial refrigeration products, and power generation and transmission cooling solutions. HVAC technologies products ~~included~~include ~~incremental~~heating ~~sales~~products, ~~from~~including ~~our~~unit ~~Scott~~heaters, ~~Springfield~~roof-mounted ~~Manufacturing~~direct- ~~business~~and indirect-fired makeup air units, ~~which~~duct wefurnaces, ~~acquired~~infrared ~~during~~units, ~~the~~and ~~fourth~~perimeter ~~quarter~~heating ofproducts. HVAC ~~fiscal~~technologies ~~2024~~products also include indoor air quality products, including single packaged unit ventilators, ceiling cassettes, modular chillers, air handling units, condensing units, and ~~significant~~desiccant ~~organic~~dehumidifiers. We ~~sales~~sell ~~growth~~our products and solutions both directly to ~~hyperscale~~commercial and ~~colocation~~industrial OEM and end user customers and through wholesalers, distributors, consulting engineers, contractors and data center management customers.

InDuring fiscal 2026, ~~we will elevate our 80/20 discipline across our~~ Climate Solutions ~~businesses. We~~segment ~~will~~sales ~~leverage~~increased ~~our~~$621 ~~deep~~million, ~~expertise~~or in43 ~~thermal~~percent, ~~management~~compared towith ~~bring~~the ~~highly-engineered~~prior year, ~~mission~~primarily ~~critical~~driven ~~thermal~~by ~~solutions~~higher tosales ~~our~~of ~~customers~~data center and toHVAC ~~capitalize~~technologies ~~on growth opportunities supported by mega-trends in the areas of high-performance computing~~products, ~~low~~which ~~global~~increased ~~warming~~$468 ~~refrigerant~~million ~~regulations,~~ and ~~indoor~~$102 ~~air~~million, ~~quality~~respectively. We ~~are~~have ~~particularly~~rapidly ~~excited~~expanded ~~about~~our ~~growth~~Data ~~opportunities~~Centers inbusiness, ~~the~~investing ~~global~~to ~~data~~expand ~~center~~our ~~markets. We~~manufacturing ~~expect~~capacity, ~~continued~~particularly ~~strong growth~~ in the ~~data~~U.S. ~~center~~and ~~markets during fiscal 2026~~Canada, asto support the ~~need~~significant ~~for~~sales ~~digital~~growth ~~infrastructure continues~~ to ~~expand. Through~~both ~~our~~hyperscale ~~acquisition~~and ofcolocation ~~Scott~~customers ~~Springfield~~during ~~Manufacturing~~fiscal ~~and~~2026. The ~~investment~~higher inHVAC ~~liquid cooling~~ technologies, ~~we have expanded our~~ product ~~portfolio~~sales ~~and~~include ~~will~~$119 ~~continue~~million toof ~~invest~~incremental insales ~~product~~from ~~innovations~~three ~~and~~businesses ~~next-generation~~— ~~technology~~AbsolutAire, toL.B. ~~meet~~White, ~~the~~and ~~data~~Climate ~~center~~by ~~cooling~~Design ~~needs~~— ofthat ~~new~~we ~~and~~acquired ~~existing~~during ~~customers~~fiscal ~~in the future~~2026. WeThese ~~are~~acquisitions ~~continuing~~expanded ~~to increase~~ our ~~production~~heating ~~capacity~~ and ~~global~~indoor ~~footprint,~~air ~~including~~quality aproduct ~~new~~portfolios ~~production~~and ~~facility~~broadened inour ~~India,~~customer tobase. We ~~support~~are ~~our~~seeing ~~customers~~the ~~with~~benefits ~~data~~of ~~center~~our ~~cooling~~strategic ~~solutions~~growth ~~and best-in-class support~~initiatives.

WeEffective ~~also~~April ~~expect~~1, ~~the~~2026, ~~North~~we ~~American~~reorganized ~~commercial~~our ~~HVAC~~Climate Solutions segment and ~~school~~split ~~markets,~~it tointo ~~which~~two weseparate ~~sell~~segments: ~~our~~1) ~~indoor~~Data ~~air~~Centers ~~quality~~and ~~products,~~2) ~~will~~Commercial ~~experience~~HVAC. We ~~modest~~believe ~~growth~~that ~~during~~managing ~~fiscal~~these ~~2026,~~businesses ~~driven~~independently bywill ~~private~~allow ~~and~~our ~~local~~teams ~~institutional~~to ~~funding~~better ~~for~~deploy ~~ventilation~~our ~~improvements~~80/20 ~~for~~strategy ~~commercial~~to ~~applications~~capitalize on growth opportunities and ~~schools~~optimize profit margins and cash flow. We are ~~strategically~~especially ~~expanding~~excited about opportunities to grow our ~~HVAC~~Data ~~technology~~Centers ~~portfolio~~segment toand ~~better~~are ~~serve~~prioritizing the expansion of this business and our ~~customers~~manufacturing ~~with~~footprint ~~tailored~~to ~~solutions~~meet increasing customer demand. InWe ~~April~~expect ~~2025~~strong growth in the data center cooling markets in fiscal 2027, wesupported ~~acquired~~by ~~AbsolutAire~~sustained ~~Inc.~~global reliance on digital technologies and anticipated significant investments in data center infrastructure, aparticularly ~~Michigan-based~~in ~~manufacturer~~the U.S. In light of ~~direct-fired~~this ~~heating~~strong growth, ~~ventilation~~however, ~~and~~market ~~make-up~~demand ~~air~~is ~~systems~~currently ~~that~~outpacing ~~complements~~supplier ~~our~~capacity ~~existing~~for ~~Heating~~certain ~~and~~components ~~Indoor~~that ~~Air~~we ~~Quality~~purchase ~~businesses~~to manufacture our data center products. InWe ~~addition,~~began experiencing supply shortages in ~~response~~the tofourth ~~F-gas~~quarter ~~regulations,~~of wefiscal 2026. These component shortages are ~~working~~negatively ~~closely~~impacting ~~with~~our ~~customers~~production toschedules ~~design~~for ~~heat~~the ~~exchangers~~first ~~and~~quarter ~~systems~~of ~~that~~fiscal ~~leverage~~2027. We ~~now-required~~are ~~low~~actively ~~global~~working ~~warming~~with ~~potential~~our ~~refrigerants~~supply ~~effectively~~chain, including qualifying new vendors, to mitigate the supply constraints. ~~Further~~As we work to grow our businesses, we ~~are~~will ~~focused~~continue onto ~~growing~~apply our ~~refrigeration~~strategic ~~sales~~pillars ~~and~~to ~~believe~~drive wevalue ~~can~~creation. We ~~become~~will aleverage ~~market~~our ~~leader~~deep expertise in ~~more~~thermal ~~environmentally~~management ~~friendly~~to ~~carbon~~bring ~~dioxide~~highly-engineered, ~~gas~~mission-critical ~~coolers~~thermal solutions to our customers and ~~adiabatic~~to ~~solutions~~capitalize on growth opportunities supported by mega-trends in ~~North~~the ~~America~~areas of digitalization, climate change, and ~~Europe. Finally~~urbanization, wewhich are increasing the needs for energy-efficient cooling solutions and HVAC technologies products. We are also focused on applying 80/20 principles within our manufacturing facilities and expect to achieve ~~further~~ production efficiency improvements as a result.

3032

Table of Contents

Performance Technologies (4535 percent of fiscal ~~2025~~2026 net sales)

The Performance Technologies segment provides products and solutions that enhance the performance of customer applications and develops solutions that provide mission -critical energy for a variety of end market applications. The segment also provides solutions that increase fuel economy, reduce harmful emissions and maximize range in zero emission applications. The ~~Performance~~segment’s ~~Technologies~~Heavy-Duty ~~segment~~Equipment ~~designs~~business ~~and~~provides ~~manufactures~~heat ~~products~~exchangers and ~~solutions~~cooling ~~using~~modules ~~air~~for off-~~cooled~~highway markets, including agricultural and ~~liquid~~construction. In addition, the Heavy-~~cooled~~Duty ~~technology~~Equipment ~~for~~business ~~vehicular,~~sells ~~stationary~~cooling ~~power,~~module ~~and~~generator ~~industrial~~sets ~~applications~~that provide mission-critical stationary power. ~~Air~~Heavy-~~cooled~~Duty Equipment products ~~consist~~ primarily ofinclude powertrain cooling products, such as radiators, condensers, ~~engine cooling modules,~~ charge air coolers, ~~fan~~oil ~~shrouds~~coolers, and ~~surge~~engine ~~tanks~~cooling modules; and Gensets. ~~Liquid~~The segment’s On-~~cooled~~Highway Applications business provides heat exchangers and cooling systems for commercial vehicle, automotive, bus and specialty vehicle customers. Its products and solutions include products for traditional powertrains, including aluminum and stainless steel engine oil coolers, EGR coolers, ~~liquid~~ charge air coolers, transmission and retarder oil coolers, chillers, condensers, fan shrouds, and ~~condensers~~surge tanks. In addition, the ~~Performance~~On-Highway ~~Technologies~~Applications ~~segment~~business provides ~~advanced~~products ~~thermal~~and solutions ~~designed~~for ~~to improve battery range and vehicle life to~~ zero-emission and hybrid passenger car, commercial vehicle, bus and ~~off-highway~~specialty ~~customers. These~~vehicles, ~~solutions~~including ~~include~~complete battery thermal management systems, electronics cooling packages, ~~and~~ battery chillers, battery cooling plates, coolers and casings for electronics cooling, and coolers for e-axles.

During fiscal ~~2025~~2026, Performance Technologies segment sales decreased $~~158~~31 million, or 123 percent, compared with the prior year, primarily due to lower sales volume, ~~including~~in ~~$54~~North ~~million~~America, oflargely ~~lower~~due ~~sales~~to ~~from~~general ~~three~~market ~~automotive~~weakness ~~businesses~~and ~~in Germany that we sold during~~ the ~~third~~strategic ~~quarter~~exit of ~~fiscal~~lower-margin ~~2024~~business. In ~~fiscal~~light ~~2025,~~of ~~we focused on applying 80/20 principles and were able to achieve gross margin improvement despite~~ the lower sales volume~~. We~~, ~~closed~~we afocused ~~technical~~on ~~service~~cost ~~center~~containment inmeasures ~~Germany~~during tofiscal ~~optimize~~2026 ~~the~~and ~~utilization~~significantly oflowered our ~~global technical service center capacity and have taken restructuring actions, including targeted headcount reductions and product line transfers, to reduce~~ selling, general, and administrative (“SG&A”) ~~and operational~~ expenses ~~and to optimize the efficiency of our supply chain and manufacturing processes. In fiscal 2025~~, wewhich ~~signed~~benefitted afrom ~~definitive~~recent ~~agreement~~restructuring ~~to sell the technical service center in Germany and expect the sale transaction will close during the first half of fiscal 2026~~actions.

~~Looking~~In ~~ahead~~January 2026, we ~~are~~entered ~~closely~~into ~~monitoring~~definitive ~~uncertainties~~agreements into ~~the~~spin-off ~~markets~~and wesimultaneously ~~serve,~~combine ~~including~~our ~~the~~Performance ~~potential~~Technologies ~~impacts~~segment ofbusiness ~~tariffs~~with onGentherm ~~our~~in ~~businesses,~~a ~~our~~Reverse ~~customers,~~Morris ~~and~~Trust ~~the~~Transaction. We ~~economy~~expect asthe atransaction ~~whole. In~~will ~~anticipation~~close ofby ~~continued~~the ~~weakness~~end inof ~~vehicular~~calendar ~~markets,~~2026 weand are ~~actively~~focused ~~reducing~~on ~~our~~executing ~~cost~~the ~~structure~~steps innecessary ~~the~~to ~~Performance~~facilitate ~~Technologies~~a ~~segment~~smooth and ~~have~~timely ~~approved~~transaction. Gentherm, ~~additional~~a ~~headcount~~Michigan-based ~~reductions~~corporation, ~~during~~is ~~the~~a ~~first~~global ~~quarter~~leader of ~~fiscal~~innovative ~~2026~~thermal management and pneumatic comfort technologies. We believe this transaction will ~~continue~~provide toa ~~apply~~renewed ~~80/20~~focus ~~principles~~on investment and ~~are~~growth ~~focused~~opportunities onfor ~~exiting~~ the ~~portions~~Performance ofTechnologies ~~our~~ business, ~~that~~while dopositioning ~~not~~us ~~align~~to ~~with~~further ~~our~~focus ~~strategic~~on ~~plan~~the data center and commercial HVAC&R markets. WeUntil ~~will~~the ~~also~~transaction ~~continue~~closes, we are continuing to ~~evaluate~~manage this business as our ~~manufacturing~~Performance ~~footprint~~Technologies tosegment, ~~optimize~~using our ~~production~~strategic pillars rooted in 80/20 principles as our guide.

Consolidated Results of Operations

~~Acquisitions~~Pending ~~and~~Reverse ~~dispositions~~Morris Trust Transaction

OnAs ~~March 1,~~discussed ~~2024,~~earlier wein ~~acquired~~this ~~Scott Springfield Manufacturing~~report, awe ~~Canadian-based~~have ~~manufacturer~~entered ofinto ~~air~~definitive ~~handling~~agreements ~~units~~with Gentherm, ~~for~~whereby ~~consideration~~we ~~totaling~~will ~~$184 million.~~spin-off Onand ~~July 1,~~simultaneously ~~2023,~~combine weour ~~acquired~~Performance ~~Napps~~Technologies ~~Technology~~segment ~~Corporation~~businesses ~~(“Napps”),~~with aGentherm ~~Texas-based~~in ~~manufacturer~~a ofReverse ~~air-~~Morris ~~and~~Trust ~~water-cooled~~transaction. We ~~chillers,~~anticipate ~~condensing~~this ~~units~~transaction ~~and~~will ~~heat~~close ~~pumps,~~by ~~for~~the ~~consideration~~end ~~totaling~~of $6calendar ~~million. These~~2026, ~~acquisitions~~subject ~~expanded~~to ~~our~~approval ~~data~~by ~~center~~Gentherm’s shareholders and ~~indoor~~other ~~air~~closing ~~quality~~conditions, ~~product~~including ~~portfolios~~regulatory ~~and~~approvals. The ~~support~~transaction ~~our~~is ~~growth~~intended ~~strategy~~to ~~and~~establish ~~mission~~Gentherm ofas ~~improving~~a ~~indoor~~scaled ~~air~~leader ~~quality~~in thermal management. We ~~have~~will ~~reported~~retain ~~the~~our ~~financial~~Climate ~~results~~Solutions ofsegment ~~these~~ businesses, ~~within~~creating ~~the~~a ~~Climate~~pure-play ~~Solutions~~climate ~~segment~~solutions ~~since~~company focused on the ~~acquisition~~data ~~dates~~center and commercial HVAC&R markets.

InUnder ~~October~~the ~~2023~~terms of the agreement, weat ~~sold~~the ~~three~~time ~~automotive~~of the spin-off of our Performance Technologies segment businesses, ~~based~~our inshareholders ~~Germany~~will receive newly-issued Gentherm stock, representing ownership of approximately 40 percent of the combined company. ~~The~~In ~~sale~~addition, immediately prior to transaction closing, we will receive cash proceeds of ~~these~~$210 ~~Performance~~million, ~~Technologies~~subject ~~businesses~~to adjustment, which ~~produce~~will ~~air-~~be ~~and~~used ~~liquid~~to pay down our long-~~cooled~~term ~~products~~debt ~~for~~obligations. Based ~~internal~~upon ~~combustion~~the ~~diesel~~Gentherm ~~and~~stock ~~gasoline~~price, ~~engines~~the ~~for~~transaction was valued at approximately $1 billion when we entered into the ~~European~~agreement. Under ~~automotive~~the ~~market~~Reverse Morris Trust structure, ~~supports~~the ~~our~~transaction ~~strategic~~is ~~prioritization~~intended ofto ~~resources~~be ~~towards~~generally ~~higher~~tax-~~margin~~free ~~technologies~~for U.S. federal income tax purposes for the Company and our shareholders. To facilitate this transaction, we expect to incur significant fees for transaction advisory, legal, accounting, tax and other professional services. We currently estimate that these fees and other costs directly related to the transaction will total approximately $45 million to $55 million.

In September 2023, we sold two coatings facilities, located in California and Florida. Sales from these two businesses, which provided aftermarket application services, totaled $6 million in fiscal 2023.

In December 2024, we signed a definitive agreement to sell our technical service center and administrative support facility in Germany to a real estate investment firm for €12 million ($12 million). Earlier this fiscal year, we closed the technical service center and reduced headcount in light of the sale of the three automotive businesses in Germany. We expect the sale transaction will close during the first half of fiscal 2026, subject to remaining closing conditions. We expect to record a gain on sale, net of costs to sell, of approximately $3 million when the transaction is completed. 33

Table of Contents

InFiscal April 2025, we acquired AbsolutAire, Inc., a Michigan-based manufacturer of direct-fired heating, ventilation, and make-up air systems. We paid $11 million upon transaction closing. This acquisition supports our growth strategy by expanding our heating and indoor air quality product portfolios and also broadens our customer base in the commercial, industrial, food service, and warehousing sectors. We will report the financial results of this business within the Climate Solutions segment beginning in the first quarter of fiscal 2026. acquisitions

During fiscal 2026, we acquired three businesses within our Climate Solutions segment, each supporting our growth strategy by expanding our product portfolio and broadening our customer base.

On April 1, 2025, we acquired substantially all of the net operating assets of AbsolutAire for $11 million. AbsolutAire is a Michigan-based manufacturer of direct-fired heating, ventilation, and make-up air systems.

On May 31, 2025, we acquired L.B. White for $111 million. Headquartered in Wisconsin, with additional manufacturing and distribution operations in Georgia, L.B. White is a leading provider of specialty heating solutions, including direct-fired forced air, radiant, indirect-fired, and electric heating solutions, for the agriculture, construction, and special event industries.

On July 1, 2025, we acquired Climate by Design for $64 million. Based in Minnesota, Climate by Design specializes in desiccant dehumidification technology and critical process air handlers.

Fiscal 2024 acquisitions and dispositions

During fiscal 2024, we acquired two businesses within our Climate Solutions segment. On March 1, 2024, we acquired Scott Springfield Manufacturing, a Canadian-based manufacturer of air handling units, for consideration totaling $184 million. On July 1, 2023, we acquired Napps Technology Corporation (“Napps”), a Texas-based manufacturer of air- and water-cooled chillers, condensing units and heat pumps, for consideration totaling $6 million.

In October 2023, we sold three automotive businesses based in Germany. Sales from these three businesses totaled $54 million in fiscal 2024.

See Note 2 of the Notes to Consolidated Financial Statements for further information regarding acquisitions and dispositions.

Fiscal 2026 highlights

Fiscal 2026 net sales increased $598 million, or 23 percent, from the prior year, primarily due to higher sales in our Climate Solutions segment, driven by higher sales of data center products and $119 million of incremental sales from the three businesses that we acquired during fiscal 2026. Cost of sales increased $510 million, or 26 percent, primarily due to the higher sales volume. Gross profit increased $87 million. Gross margin declined 190 basis points to 23.0 percent and was negatively impacted by temporary operating inefficiencies associated with the rapid expansion of our Data Centers business and higher material costs in both of our operating segments. SG&A expenses increased $28 million and included higher costs associated with our strategic acquisition and disposition activities. Operating income of $342 million during fiscal 2026 increased $59 million from the prior year, primarily due to higher gross profit and lower restructuring expenses, partially offset by higher SG&A expenses. During fiscal 2026, we recorded a $116 million non-cash pension termination charge in connection with the termination of our primary U.S. pension plan.

Fiscal 2025 highlights

Fiscal 2025 net sales increased $175 million, or 7 percent, from the prior year, primarily due to higher sales in our Climate Solutions segment, partially offset with lower sales in our Performance Technologies segment. Cost of sales increased $58 million, or 3 percent. Gross profit increased $118 million and gross margin improved 310 basis points to 24.9 percent. SG&A expenses increased $58 ~~million~~ and included higher compensation-related expenses and higher expenses from Scott Springfield Manufacturing, including amortization expense for acquired intangible assets. Operating income of $283 million during fiscal 2025 increased $42 million from the prior year, primarily due to higher gross profit, partially offset by higher SG&A and restructuring expenses and the absence of a $4 million gain on the sale of three automotive businesses in Germany in fiscal 2024.

~~Fiscal 2024 highlights~~34

~~Fiscal~~Table ~~2024 net sales increased $110 million, or 5 percent, from the prior year, primarily due to higher sales in our Performance Technologies and Climate Solutions segments. Cost~~ of sales decreased $27 million, or 1 percent, primarily due to lower material costs and improved operating efficiencies. Gross profit increased $137 million and gross margin improved 490 basis points to 21.8 percent. SG&A expenses increased $40 million, primarily due to higher compensation-related expenses. Operating income of $241 million during fiscal 2024 increased $91 million from the prior year, primarily due to higher gross profit, partially offset by higher SG&A and restructuring expenses.Contents

The following table presents our consolidated financial results on a comparative basis for fiscal years ~~2025~~2026, ~~2024~~2025 and ~~2023~~2024.


	~~Years~~ ~~ended~~ ~~March 31,~~	Years ended March 31,
	~~2025~~	2026				~~2024~~	2025				~~2023~~	2024
(in millions)	~~$’s~~	$’s		% of ~~sales~~	% of sales	~~$’s~~	$’s		% of ~~sales~~	% of sales	~~$’s~~	$’s		% of ~~sales~~	% of sales
Net sales	$	~~2,583~~$	3,181	~~100.0~~	%100.0	$%	~~2,408~~$	2,583	~~100.0~~	%100.0	$%	~~2,298~~$	2,408	~~100.0~~	%100.0	%
Cost of sales		~~1,940~~	2,450	~~75.1~~	%77.0	%	~~1,882~~	1,940	~~78.2~~	%75.1	%	~~1,909~~	1,882	~~83.1~~	%78.2	%
Gross profit		~~644~~	731	~~24.9~~	%23.0	%	~~526~~	644	~~21.8~~	%24.9	%	~~389~~	526	~~16.9~~	%21.8	%
Selling, general and administrative expenses		~~332~~	360	~~12.9~~	%11.3	%	~~274~~	332	~~11.4~~	%12.9	%	~~234~~	274	~~10.2~~	%11.4	%
Restructuring expenses		28	21	~~1.1~~	%0.6	%	15	28	~~0.6~~	%1.1	%	5	15	~~0.2~~	%0.6	%
Gain on sale of assets		—		—			(4)		(0.2)	%		—		—
Impairment charge			4		0.1	%		—		—			—		—
Operating income		283		11.0	%		241		10.0	%		150		6.5	%
Loss (gain) on sale of assets			4		0.1	%		—		—			(4)		(0.2)	%
Interest expense		(26)		(1.0)	%		(24)		(1.0)	%		(21)		(0.9)	%
Operating income			342		10.8	%		283		11.0	%		241		10.0	%
Other expense – net		(3)		(0.1)	%		(2)		(0.1)	%		(4)		(0.2)	%
Interest expense			(32)		(1.0)	%		(26)		(1.0)	%		(24)		(1.0)	%
Earnings before income taxes		254		9.8	%		215		8.9	%		125		5.5	%
Pension termination charge			(116)		(3.6)	%		—		—			—		—
(Provision) benefit for income taxes		(69)		(2.7)	%		(51)		(2.1)	%		28		1.2	%
Other expense – net			(8)		(0.3)	%		(3)		(0.1)	%		(2)		(0.1)	%
Net earnings	$	186		7.2	%	$	163		6.8	%	$	154		6.7	%
Earnings before income taxes			186		5.9	%		254		9.8	%		215		8.9	%
Provision for income taxes			(63)		(2.0)	%		(69)		(2.7)	%		(51)		(2.1)	%
Net earnings		$	123		3.9	%	$	186		7.2	%	$	163		6.8	%

Year ended March 31, 2026 compared with year ended March 31, 2025

Fiscal 2026 net sales of $3,181 million were $598 million, or 23 percent, higher than the prior year, primarily due to $621 million of higher sales in our Climate Solutions segment, including organic sales growth to hyperscale and colocation data center customers in North America and Europe and $119 million of incremental sales from the acquired L.B. White, Climate by Design, and AbsolutAire businesses. The higher sales in the Climate Solutions segment were partially offset by $31 million of lower sales in our Performance Technologies segment, largely due to market weakness. Foreign currency exchange rates favorably impacted sales by $63 million.

Fiscal 2026 cost of sales of $2,450 million increased $510 million, or 26 percent, primarily due to higher sales volume in the Climate Solution segment and a $50 million unfavorable impact of foreign currency exchange rates. In addition, cost of sales was unfavorably impacted by temporary operating inefficiencies in the Climate Solutions segment, largely due to the rapid expansion of manufacturing capacity for data center products, and higher raw material costs, which increased $28 million and included the impact of tariffs. These drivers, which increased cost of sales, were partially offset by lower sales volume in the Performance Technologies segment. As a percentage of sales, cost of sales increased 190 basis points to 77.0 percent, primarily due to temporary operating inefficiencies, higher material costs, and the absence of commercial pricing settlements and sales tax credits, which favorably impacted the prior year.

As a result of higher sales and higher cost of sales as a percentage of sales, gross profit increased $87 million and gross margin declined 190 basis points to 23.0 percent.

32Fiscal 2026 SG&A expenses increased $28 million, or 8 percent. As a percentage of sales, SG&A expenses decreased 160 basis points. The increase in SG&A expenses includes higher compensation-related expenses in the Climate Solutions segment, supporting the segment’s growth and including incremental expenses from the acquired businesses. Other costs directly associated with acquisition and disposition activities increased $18 million. These drivers, which increased SG&A expenses, were partially offset by lower compensation-related expenses in the Performance Technologies segment, which included the benefits of previous restructuring actions, and lower incentive compensation expense.

Restructuring expenses during 2026 decreased $7 million compared with the prior year, primarily due to lower severance expenses in the Performance Technologies segment and at Corporate, partially offset by higher severance expenses in the Climate Solutions segment and higher costs related to transferring production for certain product lines.

During fiscal 2026, we recorded a $4 million non-cash impairment charge in the Performance Technologies segment related to a technical service center and administrative support facility in Germany, the sale of which is pending.

Table of Contents

During fiscal 2026, we recorded a $4 million loss at Corporate resulting from the settlement of a loan facility that we had provided to the buyer of our Austrian automotive business in fiscal 2022.

Operating income of $342 million in fiscal 2026 increased $59 million compared with the prior year, primarily due to higher gross profit and lower restructuring expenses, partially offset by higher SG&A expenses and the impairment charge and loss on sale of assets in fiscal 2026.

Interest expense in fiscal 2026 increased $6 million compared with the prior year, primarily due to higher average outstanding borrowings, partially offset by favorable changes in interest rates.

During fiscal 2026 and in connection with the termination of our primary U.S. pension plan, we recorded a $116 million non-cash pension termination charge to recognize actuarial losses that were included within accumulated other comprehensive loss on our consolidated balance sheet.

Other net expense during fiscal 2026 increased $5 million compared with the same period last year, primarily due to net foreign currency transaction losses, which increased $6 million compared with fiscal 2025.

The provision for income taxes of $63 million decreased $6 million from fiscal 2025. Higher operating earnings and the impact of provisions of the One Big Beautiful Bill Act (“OBBBA”) increased the income tax provision in fiscal 2026. These increases were more than offset by a $13 million net income tax benefit related to the U.S. pension plan termination and the impact of changes in the mix and amount of foreign and U.S. earnings. The $13 million net income tax benefit related to the pension termination charge included a $17 million income tax detriment resulting from disproportionate income tax effects in accumulated other comprehensive loss. The impacts associated with provisions of the OBBBA on state deferred taxes and the utilization of foreign tax credits increased the income tax provision during fiscal 2026 by $6 million. The Company is continuing to assess provisions of the OBBBA that are expected to impact future periods.

Year ended March 31, 2025 compared with year ended March 31, 2024

Fiscal 2025 net sales of $2,583 million were $175 million, or 7 percent, higher than the prior year, primarily due to $333 million of higher sales in our Climate Solution segment, partially offset by $158 million of lower sales in our Performance Technologies segment. The Climate Solutions sales increase ~~includes~~included $240 million of higher sales from the Scott Springfield Manufacturing and Napps businesses, which we acquired in fiscal 2024, and organic sales growth to hyperscale and colocation data center customers. The lower sales in our Performance Technologies segment ~~includes~~included a $54 million impact from the disposition of three automotive businesses in Germany during the third quarter of fiscal 2024. Fiscal 2025 sales were negatively impacted by $18 million from foreign currency exchange rates.

Fiscal 2025 cost of sales of $1,940 million increased $58 million, or 3 percent, primarily due to higher sales volume and, to a lesser extent, higher labor and inflationary costs. These increases were partially offset by improved operating efficiencies and a $13 million favorable impact of foreign currency exchange rates. As a percentage of sales, cost of sales decreased 310 basis points to 75.1 percent, primarily due to the favorable sales mix, higher average selling prices, and improved operating efficiencies.

As a result of higher sales and ~~lower~~higher cost of sales as a percentage of sales, gross profit increased $118 million and gross margin improved 310 basis points to 24.9 percent.

Fiscal 2025 SG&A expenses increased $58 million, or 21 percent. As a percentage of sales, SG&A expenses increased by 150 basis points. The increase in SG&A expenses ~~includes~~included higher compensation-related expenses, which increased $45 million and included higher expenses from the acquired businesses and increased incentive compensation resulting from improved financial results. In addition, SG&A expenses included $17 million of higher amortization expense for acquired intangible assets. These increases were partially offset by lower environmental charges related to a previously-closed manufacturing facility in the U.S. and lower costs directly associated with the acquisition and integration of Scott Springfield Manufacturing. The environmental charges and acquisition-related costs were recorded at Corporate and both decreased $2 million compared with the prior year.

Table of Contents

Restructuring expenses during 2025 increased $13 million compared with the prior year, primarily due to higher severance expenses and product line transfer costs in the Performance Technologies and Climate Solutions segments.

We recorded a $4 million gain on sale at Corporate during fiscal 2024 as a result of the sale of three automotive businesses based in Germany.

Operating income of $283 million in fiscal 2025 increased $42 million compared with the prior year, primarily due to higher gross profit, partially offset by higher SG&A and restructuring expenses and the absence of the $4 million gain on the sale of the automotive businesses in Germany.

Interest expense in fiscal 2025 increased $2 million compared with the prior year, primarily due to higher borrowings on our revolving credit facility, which we used to fund a portion of the purchase price for the acquisition of Scott Springfield Manufacturing.

The provision for income taxes was $69 million and $51 million in fiscal 2025 and 2024, respectively. The $18 million increase was primarily due to higher earnings and the absence of a $3 million income tax benefit recorded in fiscal 2024 related to the sale of three automotive businesses in Germany. These drivers, which increased the provision for income taxes, were partially offset by changes in the mix and amount of foreign and U.S. earnings in the current year compared to the prior year.

Year ended March 31, 2024 compared with year ended March 31, 2023

Fiscal 2024 net sales of $2,408 million were $110 million, or 5 percent, higher than the prior year, primarily due to higher average selling prices and a $28 million favorable impact of foreign currency exchange rates. Sales in the Performance Technologies and Climate Solutions segments increased $53 million and $51 million, respectively.

Table of Contents

Fiscal 2024 cost of sales of $1,882 million decreased $27 million, or 1 percent, primarily due to lower raw material prices, which decreased $50 million, and, to a lesser extent, improved operating efficiencies. These decreases were partially offset by a $22 million unfavorable impact of foreign currency exchange rates and higher labor and inflationary costs. In addition, cost of sales in fiscal 2024 was negatively impacted by an inventory purchase accounting adjustment of $2 million recorded at Corporate related to the acquisition of Scott Springfield Manufacturing. As a percentage of sales, cost of sales decreased 490 basis points to 78.2 percent, primarily due to the favorable impact of higher sales, lower material costs, and improved operating efficiencies, partially offset by higher labor and inflationary costs.

As a result of higher sales and lower cost of sales as a percentage of sales, gross profit increased $137 million and gross margin improved 490 basis points to 21.8 percent.

Fiscal 2024 SG&A expenses increased $40 million, or 17 percent. As a percentage of sales, SG&A expenses increased by 120 basis points. The increase in SG&A expenses was primarily driven by higher compensation-related expenses, which increased approximately $22 million, and increases across other general and administrative expenses, such as higher product development costs, professional service fees, and employee travel expenses. The compensation-related expenses included higher incentive compensation expenses driven by improved financial results, as compared with the prior year. In addition, we recorded $2 million of costs related to the acquisition and integration of Scott Springfield Manufacturing in fiscal 2024.

Restructuring expenses during 2024 increased $10 million compared with the prior year, primarily due to higher severance expenses in the Performance Technologies segment.

We sold three automotive businesses based in Germany on October 31, 2023. As a result of the sale, we recorded a $4 million gain on sale at Corporate during fiscal 2024.

Operating income of $241 million in fiscal 2024 increased $91 million compared with the prior year, primarily due to a $137 million increase in gross profit, partially offset by higher SG&A and restructuring expenses.

Interest expense in fiscal 2024 increased $3 million compared with the prior year, primarily due to unfavorable changes in interest rates and borrowings on our revolving credit facility that we used to fund a portion of the purchase price for the acquisition of Scott Springfield Manufacturing, partially offset by the absence of $1 million of costs recorded in the prior year related to a credit agreement amendment.

The provision for income taxes was $51 million in fiscal 2024, compared with a benefit for income taxes of $28 million in fiscal 2023. The $79 million change was primarily due to the absence of a $57 million income tax benefit recorded in the prior year related to the reversal of the valuation allowance on certain deferred tax assets in the U.S. and higher earnings in the current year, as compared with the prior year. These drivers, which increased the provision for income taxes, were partially offset by a $3 million income tax benefit recorded in fiscal 2024 related to the sale of three automotive businesses in Germany.

Segment Results of Operations

Effective April 1, ~~2024~~2026, we ~~moved~~reorganized our ~~Coatings business, which was previously managed by and reported within the Performance Technologies segment, under the leadership of the~~ Climate Solutions segment~~. Under~~ ~~this~~and ~~refined~~split ~~organizational~~it ~~structure,~~into ~~the~~two ~~Coatings~~separate ~~business~~operating issegments: ~~better~~1) ~~aligned~~Data ~~with~~Centers ~~the Climate Solution’s Heat Transfer Products business, which serves similar heating, ventilating, air conditioning,~~ and ~~refrigeration~~2) ~~markets~~Commercial ~~and customers~~HVAC. We believe that ~~unifying~~managing these ~~complementary~~ businesses ~~allows~~independently will allow us to better ~~focus~~deploy ~~resources~~our 80/20 strategy focused on ~~targeted~~capitalizing on growth opportunities, ~~and~~particularly ~~more~~in ~~efficiently~~our ~~apply~~Data ~~80/20~~Centers ~~principles~~business, toand ~~optimize~~optimizing profit margins and cash flow. ~~The~~Beginning ~~segment~~for ~~realignment~~fiscal ~~had no impact on our consolidated financial position~~2027, ~~results~~we ofwill ~~operations,~~report ~~and~~three ~~cash~~operating ~~flows. We~~segments: ~~have~~1) ~~recast~~Data ~~the~~Centers; ~~segment~~2) ~~financial~~Commercial ~~information~~HVAC ~~for fiscal 2024~~ and ~~2023~~3) toPerformance ~~conform to the fiscal 2025 presentation~~Technologies.

Table of Contents

Climate Solutions


	Years ended March 31,
	~~2025~~2026				~~2024~~2025				~~2023~~2024
(in millions)	$’s		% of sales		$’s		% of sales		$’s		% of sales
Net sales	$	12,~~441~~062	100.0	%	$	1,~~108~~441	100.0	%	$	1,~~057~~108	100.0	%
Cost of sales		1,~~025~~538	7174.16	%		~~811~~1,025	7371.21	%		~~816~~811	7773.2	%
Gross profit		~~416~~524	2825.94	%		~~297~~416	2628.89	%		~~241~~297	2226.8	%
Selling, general and administrative expenses		~~162~~194	119.24	%		~~115~~162	1011.42	%		~~106~~115	10.14	%
Restructuring expenses		68	0.4	%		36	0.34	%		23	0.23	%
Operating income	$	~~248~~321	1715.26	%	$	~~179~~248	1617.12	%	$	~~132~~179	1216.51	%

Year ended March 31, 2026 compared with year ended March 31, 2025

Climate Solutions net sales increased $621 million, or 43 percent, in fiscal 2026 compared with the prior year, primarily due to higher sales volume. In addition, foreign currency exchange rates favorably impacted sales by $38 million. Compared with the prior year, sales of data center, HVAC technologies, and heat transfer solutions products increased $468 million, $102 million, and $45 million, respectively. The higher data center product sales include sales growth to hyperscale and colocation customers in North America and Europe. The higher HVAC technologies product sales are primarily driven by $119 million of incremental sales from the acquired L.B. White, Climate by Design, and AbsolutAire businesses, partially offset by lower sales of other indoor air quality products. The increase in sales of heat transfer products, driven by higher sales of heat transfer coils for commercial and residential applications, was partially offset by the absence of commercial pricing settlements with heat pump customers in Europe, which had a favorable impact during the prior year.

Table of Contents

Climate Solutions cost of sales increased $513 million, or 50 percent, in fiscal 2026, primarily due to higher sales volume and, to a lesser extent, temporary operating inefficiencies, largely due to the rapid expansion of manufacturing capacity in the U.S. for data center products, and higher raw material costs, which increased $18 million and included the impact of tariffs. In addition, cost of sales was negatively impacted by $29 million from foreign currency exchange rates. As a percentage of sales, cost of sales increased 350 basis points to 74.6 percent, primarily due to the temporary operating inefficiencies, higher material costs, and the absence of the commercial pricing settlements in the prior year. Due to the increasing market demand for data center cooling products, demand for certain key components is currently outpacing supplier capacity. We began experiencing supply shortages in the fourth quarter of fiscal 2026. These component shortages are negatively impacting our production schedules for the first quarter of fiscal 2027.

As a result of the higher sales and higher cost of sales as a percentage of sales, gross profit increased $108 million and gross margin declined 350 basis points to 25.4 percent.

Climate Solutions SG&A expenses increased $32 million, or 20 percent, compared with the prior year. As a percentage of sales, SG&A expenses decreased 180 basis points. The increase in SG&A expenses was primarily driven by higher compensation-related expenses and increases across other general and administrative expenses. The higher compensation-related expenses, which increased $29 million, included expenses from the acquired businesses. This increase was partially offset by lower amortization expense, which decreased $7 million.

Restructuring expenses increased $2 million in fiscal 2026, primarily due to higher severance expenses.

Operating income of $321 million during fiscal 2026 increased $73 million from the prior year, primarily due to higher gross profit, partially offset by higher SG&A expenses.

Year ended March 31, 2025 compared with year ended March 31, 2024

Climate Solutions net sales increased $333 million, or 30 percent, in fiscal 2025 compared with the prior year, primarily due to higher sales volume, including $240 million of higher sales from the Scott Springfield Manufacturing and Napps businesses, which we acquired in fiscal 2024. Compared with the prior year, sales of data center ~~cooling~~ and HVAC&R technologies products increased $350 million and $5350 million, respectively. The increase in sales of data center ~~cooling~~ products includes sales from the acquired Scott Springfield Manufacturing business and organic sales growth to hyperscale and colocation customers. Sales of heat transfer solutions products decreased $7167 million, largely due to lower sales of heat transfer coils for heat pumps and other commercial and residential applications, partially offset by commercial pricing settlements with heat pump customers in Europe.

Climate Solutions cost of sales increased $214 million, or 26 percent, in fiscal 2025, primarily due to higher sales volume, higher raw material costs, which increased $9 million, and, to a lesser extent, higher labor and inflationary costs. These increases were partially offset by lower warranty expense, which decreased $4 million, and improved operating efficiencies. As a percentage of sales, cost of sales decreased 210 basis points to 71.1 percent, primarily due to favorable sales mix and the favorable impact of commercial pricing settlements.

As a result of the higher sales and lower cost of sales as a percentage of sales, gross profit increased $119 million and gross margin improved 210 basis points to 28.9 percent.

Climate Solutions SG&A expenses increased $47 million compared with the prior year. As a percentage of sales, SG&A expenses increased by 80 basis points. The increase in SG&A expenses includes higher compensation-related expenses, which increased $24 million, and $17 million of higher amortization expense related to acquired intangible assets.

Restructuring expenses increased $3 million in fiscal 2025, primarily due to higher severance expenses and costs related to transferring production and warehousing for certain product lines.

Operating income of $248 million during fiscal 2025 increased $69 million from the prior year, primarily due to higher gross profit, partially offset by higher SG&A expenses.

~~Year ended March 31, 2024 compared with year ended March 31, 2023~~38

Climate Solutions net sales increased $51 million, or 5 percent, in fiscal 2024 compared with the prior year, primarily due to higher sales volume and a $14 million favorable impact of foreign currency exchange rates. The higher sales volume includes $8 million of incremental sales from Scott Springfield Manufacturing, which we acquired on March 1, 2024. Compared with the prior year, sales of data center cooling products increased $120 million, primarily due to higher sales to both hyperscale and colocation customers. Sales of heat transfer and HVAC&R products decreased $68 million and $1 million, respectively. The decrease in sales of heat transfer products was largely due to market weakness and lower customer demand compared with the prior year and the strategic exit from lower-margin business in connection with 80/20 product rationalization initiatives.

Table of Contents

Climate Solutions cost of sales decreased $5 million, or 1 percent, in fiscal 2024, primarily due to lower raw material prices, which decreased $19 million, and improved operating efficiencies. These decreases were partially offset by increases resulting from higher sales volume, a $10 million unfavorable impact of foreign currency exchanges rates, and higher labor and inflationary costs and warranty expenses. As a percentage of sales, cost of sales decreased 400 basis points to 73.2 percent, primarily due to the favorable impact of higher sales and improved operating efficiencies.

As a result of the higher sales and lower cost of sales as a percentage of sales, gross profit increased $56 million and gross margin improved 400 basis points to 26.8 percent.

Climate Solutions SG&A expenses increased $9 million compared with the prior year. As a percentage of sales, SG&A expenses increased by 30 basis points. The increase in SG&A expenses includes higher compensation-related expenses and increases across other general and administrative expenses. In addition, SG&A expenses included $1 million of incremental amortization expense related to intangible assets recorded for the acquisition of Scott Springfield Manufacturing.

Restructuring expenses increased $1 million in fiscal 2024, primarily due to higher equipment transfer costs for product line transfers to improve production efficiencies in connection with our 80/20 initiatives.

Operating income of $179 million during fiscal 2024 increased $47 million from the prior year, primarily due to higher gross profit, partially offset by higher SG&A expenses.

Performance Technologies


	Years ended March 31,
	~~2025~~2026				~~2024~~2025				~~2023~~2024
(in millions)	$’s		% of sales		$’s		% of sales		$’s		% of sales
Net sales	$	1,~~163~~132	100.0	%	$	1,~~321~~163	100.0	%	$	1,~~268~~321	100.0	%
Cost of sales		~~933~~927	8081.29	%		~~1,092~~933	8280.62	%		1,~~118~~092	8882.26	%
Gross profit		~~230~~205	1918.81	%		230	1719.48	%		~~149~~230	1117.84	%
Selling, general and administrative expenses		~~102~~79	87.80	%		~~106~~102	8.08	%		89106	78.0	%
Restructuring expenses		2012	1.80	%		1220	01.98	%		312	0.29	%
Operating income	$	108	9.3	%	$	112	8.5	%	$	58	4.5	%
Impairment charge		4	0.4	%		—	—			—	—
Operating income	$	110	9.7	%	$	108	9.3	%	$	112	8.5	%

Year ended March 31, 2026 compared with year ended March 31, 2025

Performance Technologies net sales decreased $31 million, or 3 percent, in fiscal 2026 compared with the prior year, primarily due to lower sales volume in North America, largely due to market weakness and our strategic exit from lower-margin business, and, to a lesser extent, the absence of sales tax credits recognized in Brazil during the prior year. These decreases were partially offset by a $25 million favorable impact of foreign currency exchanges rates and higher average selling prices. Compared with the same period in the prior year, sales of heavy-duty equipment and on-highway applications products decreased $13 million and $4 million, respectively.

Performance Technologies cost of sales decreased $6 million, or 1 percent, in fiscal 2026, primarily due to lower sales volume and, to a lesser extent, improved operating efficiencies. These drivers, which decreased cost of sales, were partially offset by higher raw material costs, which increased $10 million and included the impact of tariffs, and a $21 million unfavorable impact of foreign currency exchange rates. As a percentage of sales, cost of sales increased 170 basis points to 81.9 percent, primarily due to the higher raw material and tariff costs, partially offset by improved operating efficiencies and higher average selling prices.

As a result of the lower sales and higher cost of sales as a percentage of sales, gross profit decreased $25 million and margin declined 170 basis points to 18.1 percent.

Performance Technologies SG&A expenses decreased $23 million, or 23 percent, compared with the prior year. As a percentage of sales, SG&A expenses decreased 180 basis points. The decrease in SG&A expenses was primarily due to lower compensation-related expenses, which decreased approximately $26 million and included the benefits of previous restructuring actions.

Restructuring expenses during fiscal 2026 totaled $12 million, a decrease of $8 million compared with the prior year, primarily due to lower severance expenses, partially offset by higher costs related to transferring production for certain product lines.

During fiscal 2026, we recorded a $4 million non-cash impairment charge to reduce the carrying value of a technical service center and administrative support facility in Germany to estimated fair value, less costs to sell.

Operating income in fiscal 2026 increased $2 million to $110 million, primarily due to lower SG&A and restructuring expenses, partially offset by lower gross profit and the impairment charge recorded in the current year.

Year ended March 31, 2025 compared with year ended March 31, 2024

Performance Technologies net sales decreased $158 million, or 12 percent, in fiscal 2025 compared with the prior year, primarily due to lower sales volume, including a $54 million impact from the disposition of three automotive businesses in Germany during the third quarter of fiscal 2024, and a $17 million unfavorable impact of foreign currency exchange rates. These decreases were partially offset by higher average selling prices and, to a lesser extent, the recognition of sales tax credits in Brazil. Compared with ~~last~~the prior year, sales of ~~liquid~~on-~~cooled~~highway applications and ~~air~~heavy-~~cooled~~duty equipment products decreased $87116 million and $7241 million, respectively. ~~Sales~~ ~~of advanced solutions products increased $3 million.~~

Table of Contents

Performance Technologies cost of sales decreased $159 million, or 15 percent, in fiscal 2025, primarily due to lower sales volume and a $13 million favorable impact of foreign currency exchange rate changes. In addition, cost of sales was favorably impacted, to a lesser extent, by improved operating efficiencies and lower raw material costs, which decreased $9 million. These drivers, which decreased cost of sales, were partially offset by higher labor and inflationary costs. As a percentage of sales, cost of sales decreased 240 basis points to 80.2 percent, primarily due to higher average selling prices, improved operating efficiencies, lower material costs, and the favorable impact of sales tax credits recognized in Brazil, partially offset by higher labor and inflationary costs.

As a result of the lower sales and lower cost of sales as a percentage of sales, gross margin improved 240 basis points to 19.8 percent. Gross profit of $230 million was consistent compared with the prior year.

Performance Technologies SG&A expenses decreased $4 million, or 4 percent, compared with the prior year. As a percentage of sales, SG&A expenses increased 80 basis points. The decrease in SG&A expenses was primarily due to lower compensation-related expenses, which decreased $1 million, a $1 million favorable impact of foreign currency exchange rates, and decreases across other general and administrative expenses.

Table of Contents

Performance Technologies SG&A expenses decreased $4 million, or 4 percent, compared with the prior year. As a percentage of sales, SG&A expenses increased by 80 basis points. The decrease in SG&A expenses was primarily due to lower compensation-related expenses, which decreased $1 million, a $1 million favorable impact of foreign currency exchange rates, and decreases across other general and administrative expenses.

Restructuring expenses during fiscal 2025 totaled $20 million, an increase of $8 million compared with the prior year, primarily due to higher severance expenses in North America and product line transfer costs.

Operating income in fiscal 2025 decreased $4 million to $108 million, primarily due to higher restructuring expenses, partially offset by lower SG&A expenses.

Year ended March 31, 2024 compared with year ended March 31, 2023

Performance Technologies net sales increased $53 million, or 4 percent, in fiscal 2024 compared with the prior year, primarily due to higher average selling prices and a $14 million favorable impact of foreign currency exchange rates. These increases were partially offset by lower sales volume, including $25 million of lower sales from the three Germany automotive businesses that we sold on October 31, 2023. Sales of advanced solutions, air-cooled and liquid-cooled products increased $28 million, $23 million, and $8 million, respectively.

Performance Technologies cost of sales decreased $26 million, or 2 percent, in fiscal 2024, primarily due to lower raw material prices, which decreased $31 million, and lower sales volume. These decreases were partially offset by higher labor and inflationary costs and a $12 million unfavorable impact of foreign currency exchange rates. As a percentage of sales, cost of sales decreased 560 basis points to 82.6 percent, primarily due to the favorable impact of higher sales and lower material costs, partially offset by higher labor and inflationary costs.

As a result of the higher sales and lower cost of sales as a percentage of sales, gross profit increased $81 million and gross margin improved 560 basis points to 17.4 percent.

Performance Technologies SG&A expenses increased $17 million, or 19 percent, compared with the prior year. As a percentage of sales, SG&A expenses increased by 100 basis points. The increase in SG&A expenses was primarily due to higher compensation-related expenses, which increased $10 million, and increases across other general and administrative expenses.

Restructuring expenses during fiscal 2024 totaled $12 million, an increase of $9 million compared with the prior year, primarily due to higher severance-related expenses associated with the closure of a technical service center in Europe.

Operating income in fiscal 2024 increased $54 million to $112 million, primarily due to higher gross profit, partially offset by higher SG&A and restructuring expenses.

Liquidity and Capital Resources

Our primary sources of liquidity are cash flow from operating activities, our cash and cash equivalents as of March 31, ~~2025~~2026 of $7274 million, and an available borrowing capacity of $~~239~~391 million under our revolving credit facility. Given our extensive international operations, approximately $59 million of our cash and cash equivalents are held by our non-U.S. subsidiaries. Amounts held by non-U.S. subsidiaries are available for general corporate use; however, these funds may be subject to foreign withholding taxes if repatriated. We believe our sources of liquidity will provide sufficient cash flow to adequately cover our funding needs on both a short-term and long-term basis.

Our primary contractual obligations include debt and related interest payments, lease obligations, ~~pension~~ obligations, ~~and obligations~~ for capital expenditures~~. Our~~, ~~global~~and pension ~~liabilities totaled $30 million as of March 31, 2025~~obligations. InDuring ~~June~~fiscal ~~2024~~2026, we ~~approved~~contributed ~~the~~$15 ~~termination~~million ofto fully fund our primary U.S. pension plan~~. In~~ ~~connection~~and ~~with~~settled all future obligations under the ~~pending~~pension ~~termination,~~plan wethrough ~~expect~~a tocombination ~~make~~of ~~cash~~lump-sum ~~contributions~~payments into participants and the ~~range~~purchase of ~~$15~~irrevocable ~~million~~annuity tocontracts. As ~~$20~~a ~~million~~result, ~~during~~we ~~fiscal~~recorded ~~2026~~a tonon-cash ~~fully~~pension ~~fund~~termination ~~the~~charge ~~plan~~of on$116 amillion ~~plan~~during ~~termination~~fiscal ~~basis~~2026. ~~See~~As ~~Note 18~~ of ~~the~~March ~~Notes to~~31, ~~Consolidated~~2026, ~~Financial~~our ~~Statements~~global ~~for~~pension ~~further~~liabilities ~~information~~totaled $12 million.

Table of Contents

Operating activities

Net cash provided by operating activities in fiscal 2026 was $249 million, an increase of $36 million from $213 million in the prior year. This increase in operating cash flow was primarily due to higher operating earnings and the favorable impact of customer deposits received during fiscal 2026, partially offset by an increase in working capital, which decreased operating cash flow, as compared with the prior year. The Climate Solutions segment’s Data Centers business is growing rapidly. We recently entered into a long-term capacity agreement with one of our data center customers, who made a $165 million up-front deposit intended to support our investments necessary to meet the planned sales volume. In addition, we have increased inventory levels to support the growing customer demand and higher sales have resulted in increased accounts receivable. The increases in inventory and accounts receivable were partially offset by increases in accounts payable, largely resulting from the higher inventory levels.

Table of Contents

Net cash provided by operating activities in fiscal 2025 was $213 million, a decrease of $2 million from $215 million in the prior year. This decrease in operating cash flow was primarily due to unfavorable net changes in working capital, as compared with the same period in the prior year, partially offset by the favorable impact of higher operating earnings. The unfavorable changes in working capital include a decrease in customer deposits associated with sales contracts with long inventory lead times and higher payments for incentive compensation, as compared with the same period in the prior year. These unfavorable changes in working capital were partially offset by the favorable impact of lower inventory levels.

Net cash provided by operating activities in fiscal 2024 was $215 million, an increase of $107 million from $108 million in the prior year. This increase in operating cash flow was primarily due to the favorable impact of higher earnings and, to a lesser extent, favorable net changes in working capital as compared with the prior year. The favorable changes in working capital include an increase in customer deposits received in connection with sales contracts with long inventory lead times.

Investing activities

Capital expenditures

Capital expenditures of $84143 million during fiscal ~~2025~~2026 ~~decreased~~increased $459 million compared with fiscal ~~2024~~2025, primarily due to higher capital spending in the Climate Solutions segment. Our capital spending in fiscal ~~2025~~2026 in the Climate Solutions and Performance Technologies segments totaled $53113 million and $3028 million, respectively. Capital spending in the Climate Solutions segment primarily includes investments ~~supporting~~to ~~our~~support ~~strategic growth initiatives, including~~ expanding production capacity for data center ~~cooling~~ products. Capital expenditures in the Performance Technologies segment include tooling and equipment purchases in conjunction with new and renewal programs with customers.

~~Business and asset acquisitions~~Acquisitions

During fiscal ~~2024~~2026, we made cash payments totaling $~~186~~182 million to acquire ~~Scott~~L.B. ~~Springfield~~White, ~~Manufacturing~~Climate by Design, and ~~Napps~~AbsolutAire. WeDuring ~~made~~fiscal ~~additional~~2024, we made cash payments totaling $3186 million ~~during fiscal 2025 for these acquisitions, primarily related~~ to aacquire ~~purchase~~Scott ~~price~~Springfield ~~working~~Manufacturing ~~capital~~and ~~adjustment~~Napps. In addition, we paid $12 million during fiscal 2024 to purchase intellectual property and ~~other~~related ~~specific~~ assets from TMGcore, Inc. These investments support our growth strategy toby ~~grow~~expanding our ~~data~~product ~~center~~portfolio ~~cooling~~ and ~~indoor~~broadening ~~air~~our ~~quality~~customer ~~product~~base ~~offerings~~ in our Climate Solutions segment. See Note 2 of the Notes to Consolidated Financial Statements for additional information regarding acquisitions.

Financing activities

Debt

~~Our~~During ~~total~~fiscal ~~debt~~2026, ~~outstanding~~borrowings ~~decreased~~on our credit facilities, net of repayments, totaled $8179 million. We borrowed on our credit facilities to ~~$351~~support ~~million~~our atstrategic ~~March 31~~growth initiatives, ~~2025~~including ~~compared~~our ~~with~~acquisitions ~~the~~of ~~prior year,~~L.B. ~~primarily~~White ~~due~~and toClimate ~~repayments~~by ~~during~~Design ~~fiscal~~and ~~2025~~the rapid expansion of our Data Centers business.

~~Our~~In ~~credit~~July ~~agreements~~2025, ~~require~~we usexecuted toan ~~maintain~~amended ~~compliance~~and ~~with~~restated ~~various~~credit ~~covenants,~~agreement ~~including~~with a ~~leverage~~syndicate ~~ratio~~of ~~covenant~~banks ~~and~~that anprovides ~~interest~~for ~~expense~~a ~~coverage~~multi-currency ~~ratio~~$400 ~~covenant,~~million ~~which~~revolving ~~are~~credit ~~discussed~~facility ~~further~~and ~~below. Indebtedness~~a ~~under~~$200 ~~our~~million ~~credit~~term ~~agreements~~loan isfacility ~~secured~~maturing byin ~~liens~~July on2030. This ~~substantially~~credit ~~all~~agreement ~~domestic~~modified ~~assets. These~~our ~~agreements~~then-existing ~~further~~revolving ~~require~~credit ~~compliance~~and ~~with~~term ~~various~~loan ~~covenants~~facilities, ~~that~~which ~~may~~would ~~limit~~have ~~our~~matured ~~ability~~in toOctober ~~incur~~2027. We ~~additional~~also ~~indebtedness;~~amended ~~grant~~the ~~liens;~~agreement ~~make~~governing ~~investments,~~our ~~loans~~Senior Notes, orto ~~guarantees;~~conform ~~engage~~the inapplicable ~~certain~~terms ~~transactions~~to ~~with~~those ~~affiliates;~~of orthe ~~make~~aforementioned ~~restricted~~amended ~~payments,~~and ~~including~~restated ~~dividends~~credit agreement. ~~Also~~In December 2025, we further amended the credit ~~agreements~~agreement ~~may~~primarily ~~require~~to ~~prepayments~~increase inthe borrowing capacity under the ~~event~~revolving ofcredit ~~certain~~facility ~~asset~~by ~~sales~~$150 million to $550 million.

~~The~~Our credit agreements require us to maintain compliance with various covenants, including a leverage ratio covenant ~~within~~and ~~our~~an ~~primary~~interest ~~credit~~expense ~~agreements~~coverage ~~requires~~ratio uscovenant, towhich ~~limit~~are discussed further below. Indebtedness under our ~~consolidated~~credit ~~indebtedness,~~agreements ~~less~~is asecured ~~portion~~by ofliens ~~our~~on ~~cash~~substantially ~~balance~~all domestic assets, ~~both~~excluding asreal ~~defined~~estate. These byagreements ~~the~~further ~~credit~~require ~~agreements,~~compliance towith novarious ~~more~~covenants ~~than~~that ~~three~~may ~~and~~limit ~~one-quarter~~our ~~times~~ability ~~consolidated~~to ~~net~~incur ~~earnings~~additional ~~before~~indebtedness; ~~interest,~~grant ~~taxes,~~liens; ~~depreciation~~make investments, ~~amortization~~loans, ~~and~~or ~~certain~~guarantees; ~~other~~engage ~~adjustments~~in ~~(“Adjusted~~certain ~~EBITDA”). We~~transactions ~~are~~with ~~also~~affiliates; ~~subject~~or tomake anrestricted ~~interest~~payments, ~~expense~~including ~~coverage~~dividends. Also, ~~ratio~~the ~~covenant,~~credit ~~which~~agreements ~~requires~~may usrequire toprepayments ~~maintain~~in ~~Adjusted~~the ~~EBITDA~~event of atcertain ~~least~~asset ~~three~~sales. In ~~times~~connection ~~consolidated~~with ~~interest~~the ~~expense. As~~pending oftransaction ~~March 31,~~with ~~2025~~Gentherm, we ~~were~~expect into ~~compliance~~receive ~~with~~$210 ~~our~~million ~~debt~~immediately ~~covenants~~prior to transaction closing. WeProceeds ~~expect~~from tothis ~~remain~~transaction inare ~~compliance~~required ~~with~~to ~~our~~be ~~debt~~applied ~~covenants~~towards ~~during~~the ~~fiscal~~principal ~~2026~~outstanding ~~and~~under ~~beyond~~our credit agreements.

38The leverage ratio covenant within our primary credit agreements requires us to limit our consolidated indebtedness, less a portion of our cash balance, both as defined by the credit agreements, to no more than three and one-half times consolidated net earnings before interest, taxes, depreciation, amortization, and certain other adjustments (“Adjusted EBITDA”). We are also subject to an interest expense coverage ratio covenant, which requires us to maintain Adjusted EBITDA of at least three times consolidated interest expense.

Table of Contents

~~See~~As ~~Note~~of March 1731, of2026, ~~the~~we ~~Notes to~~were ~~Consolidated~~in ~~Financial~~compliance ~~Statements~~with ~~for~~our ~~additional~~debt ~~information~~covenants. We ~~regarding~~expect to remain in compliance with our ~~credit~~debt ~~agreements~~covenants during fiscal 2027 and beyond.

Share repurchase ~~programs~~program

~~Effective~~During ~~March~~fiscal 72026, ~~2025,~~we ~~our~~did ~~Board~~not ofpurchase ~~Directors~~any ~~authorized~~shares usunder toour share repurchase upprogram. During tofiscal 2025, we repurchased $~~100~~18 million of ~~Modine~~our common stock atunder ~~such times and prices that we deem to be appropriate. This authorization does not expire and replaced~~ the ~~previous repurchase~~ program~~, which expired in November 2024~~. ~~During~~As ~~fiscal~~of ~~2025~~March ~~and~~31, ~~2024~~2026, we ~~repurchased~~had $1882 million ~~and $13 million, respectively,~~ of ~~our~~share ~~common~~repurchase ~~stock~~authorization remaining under the repurchase ~~programs~~program, which does not expire. Our decision whether and to what extent to repurchase additional shares depends on a number of factors, including business conditions, other cash priorities, and stock price.

Critical Accounting Policies

The following critical accounting policies reflect the more significant judgments and estimates used in preparing our consolidated financial statements. Application of these policies results in accounting estimates that have the greatest potential for a significant impact on our financial statements. The following discussion of these judgments and estimates is intended to supplement the significant accounting policies presented in Note 1 of the Notes to Consolidated Financial Statements. In addition, recently issued accounting pronouncements that either have or could materially impact our financial statements are disclosed in Note 1 of the Notes to Consolidated Financial Statements.

Revenue recognition

We recognize revenue based upon consideration specified in a contract and as we satisfy performance obligations by transferring control over our products to our customers, which may be at a point in time or over time. The majority of our revenue is recognized at a point in time, based upon shipment terms. A limited number of our customer contracts for highly-specified products provide an enforceable right to payment for performance completed to date. For these contracts, we recognize revenue over time based upon our estimated progress toward the satisfaction of the contract’s performance obligations. We record an allowance for credit losses and we accrue for estimated warranty costs at the time of sale. We base these estimates upon historical experience, current business trends and economic conditions, and risks specific to the underlying accounts receivable or warranty claims.

Impairment of long-lived assets

We perform impairment evaluations of long-lived assets, including property, plant and equipment and intangible assets, whenever business conditions or events indicate that those assets may be impaired. We consider factors such as operating losses, declining financial outlooks and market conditions when evaluating the necessity for an impairment analysis. In the event the net asset values exceed undiscounted cash flows expected to be generated by the assets, we write down the assets to fair value and record an impairment charge. We estimate fair value in various ways depending on the nature of the underlying assets. Fair value is generally based upon appraised value, estimated salvage value, or selling prices under negotiation, as applicable.

The most significant long-lived assets we evaluated for impairment indicators were property, plant and equipment and intangible assets, which totaled $~~391~~521 million and $~~147~~197 million, respectively, at March 31, ~~2025~~2026. Within property, plant and equipment, the most significant assets evaluated are buildings and improvements and machinery and equipment. Our most significant intangible assets evaluated are customer relationships, trade names, and acquired technology, all of which are related to our Climate Solutions segment. We evaluate impairment at the lowest level of separately identifiable cash flows, which is generally at the manufacturing plant level. We monitor manufacturing plant financial performance to determine whether indicators exist that would require an impairment evaluation for the facility. This includes significant adverse changes in plant profitability metrics; substantial changes in the mix of customer products manufactured in the plant; changes in manufacturing strategy; and the shifting of programs to other facilities under a manufacturing realignment strategy. When such indicators are present, we perform an impairment evaluation.

39During fiscal 2026, we recorded a non-cash impairment charge of $4 million related to technical service center and administrative support facility in Germany, which we expect to sell during fiscal 2027. See Note 2 of the Notes to Consolidated Financial Statements for additional information.

Table of Contents

Impairment of goodwill

We perform goodwill impairment tests annually, as of the end of February, unless business events or other conditions exist that require a more frequent evaluation. We consider factors such as operating losses, declining financial and market outlooks, and market capitalization when evaluating the necessity for an interim impairment analysis. We test goodwill for impairment at a reporting unit level. Goodwill resulting from recent acquisitions generally represents the highest risk of impairment, which typically decreases as the businesses are integrated into the Company and positioned for future operating and financial performance. We test goodwill for impairment by comparing the fair value of each reporting unit with its carrying value. We determine the fair value of a reporting unit based upon the present value of estimated future cash flows. If the fair value of a reporting unit exceeds the carrying value of the reporting unit’s net assets, goodwill is not impaired. However, if the carrying value of the reporting unit’s net assets exceeds its fair value, we would conclude goodwill is impaired and would record an impairment charge equal to the amount that the reporting unit’s carrying value exceeds its fair value.

Determining the fair value of a reporting unit involves judgment and the use of estimates and assumptions, which include assumptions regarding the revenue growth rates and operating profit margins used to calculate estimated future cash flows and risk-adjusted discount rates. We determine the expected future revenue growth rates and operating profit margins after consideration of our historical revenue growth rates and earnings levels, our assessment of future market potential and our expectations of future business performance. The discount rates used in determining discounted cash flows are rates corresponding to our cost of capital, adjusted for country- and business-specific risks where appropriate. While we believe the assumptions used in our goodwill impairment tests are appropriate and result in a reasonable estimate of the fair value of each reporting unit, future events or circumstances could have a potential negative effect on the estimated fair value of our reporting units. These events or circumstances include lower than forecasted revenues, market trends that fall below our current expectations, actions of key customers, increases in discount rates, and continued inflationary market conditions. We cannot predict the occurrence of certain events or changes in circumstances that might adversely affect the carrying value of goodwill.

At March 31, ~~2025~~2026, our goodwill totaled $~~234~~292 million, all of which is related to our Climate Solutions segment. We conducted goodwill impairment tests as of February 28, ~~2025~~2026, by applying a fair value-based test and determined the fair value for each of our reporting units exceeded the respective book value. A 10 percent decrease in the estimated fair value of each reporting unit would not have resulted in a different conclusion.

Acquisitions

From time to time, we make strategic acquisitions that have a material impact on our consolidated results of operations or financial position. We allocate the purchase price of acquired businesses to the identifiable tangible and intangible assets acquired and liabilities assumed in the transaction based upon their estimated fair values as of the acquisition date. We determine the estimated fair values using information available to us and engage third-party valuation specialists when necessary. The estimates we use to determine the fair value of long-lived assets, such as intangible assets, can be complex and require significant judgments. While we use our best estimates and assumptions, our estimates are inherently uncertain and subject to refinement. As a result, during the measurement period, which may be up to one year from the acquisition date, we record adjustments to the assets acquired and liabilities assumed, with the corresponding offset to goodwill. Upon conclusion of the measurement period or final determination of the values of assets acquired or liabilities assumed, whichever comes first, any subsequent adjustments are recorded to our consolidated statement of operations. We also estimate the useful lives of intangible assets to determine the amount of amortization expense to record in future periods. We periodically review the estimated useful lives assigned to our intangible assets to determine whether such estimated useful lives continue to be appropriate. During fiscal 2026, we acquired L.B. White, Climate by Design, and AbsolutAire. See Note 2 of the Notes to Consolidated Financial Statements for additional information regarding these acquisitions.

Table of Contents

Pension obligations

~~Our~~During ~~calculation~~fiscal of2026, ~~the~~we ~~expense~~completed ~~and~~the ~~liabilities~~termination of our ~~pension~~primary ~~plans is dependent upon various assumptions~~U. AtS. ~~March 31, 2025, our global~~ pension ~~liabilities totaled $30 million. The most significant assumptions include the discount rate, expected return on~~ plan ~~assets, and mortality rates~~. We ~~base~~contributed ~~our~~$15 ~~selection~~million ofto ~~these~~fully ~~assumptions~~fund ~~on historical trends and economic and market conditions at~~ the ~~time~~plan ~~of valuation. In accordance with U.S. GAAP, actual results that differ from these assumptions are accumulated~~ and ~~amortized~~settled ~~over~~all future ~~periods. These~~obligations ~~differences~~under ~~impact~~the ~~future~~ pension ~~expense. Our~~plan ~~domestic~~through ~~pension~~a ~~plans~~combination ~~are~~of ~~closed~~lump-sum payments to ~~new~~ participants; ~~therefore,~~and ~~participants in these plans are not accruing benefits based upon their current service as~~ the ~~plans~~purchase ~~do not include increases in annual earnings or for future service in calculating the average annual earnings and years~~ of ~~credited~~irrevocable ~~service~~annuity ~~under~~contracts. As ~~the~~a ~~pension~~result, ~~plan~~we ~~formula. The~~recorded ~~primary~~a non-~~U.S.~~cash ~~plans~~pension ~~are~~termination ~~maintained~~charge inof ~~Germany~~$116 ~~and~~million ~~Italy~~during ~~and~~fiscal ~~are also closed to new participants and are substantially unfunded~~2026.

InAt ~~June~~March 31, ~~2024~~2026, weour ~~approved~~global ~~the~~pension ~~termination~~liabilities totaled $12 million. The majority of ~~our~~the ~~primary~~pension liabilities relate to non-U.S. ~~pension~~plans ~~plan,~~maintained ~~which~~in weGermany ~~expect~~and toItaly. These ~~complete~~plans ~~during~~are ~~fiscal~~closed ~~2026. In~~to ~~connection~~new ~~with~~participants ~~the~~and ~~plan~~are ~~termination,~~substantially weunfunded. Our ~~have~~calculation ~~measured~~of the ~~benefit~~expense ~~obligation~~and liabilities for our ~~primary~~remaining ~~U.S.~~ pension ~~plan~~plans onis adependent ~~settlement~~upon ~~liability~~various ~~basis~~assumptions. The ~~and~~most ~~have~~significant ~~incorporated~~ assumptions ~~regarding~~include the discount rate, expected return on plan ~~termination~~assets, ~~including~~and ~~the~~mortality ~~estimated~~rates. We ~~percentage~~base ofour ~~participants~~selection ~~who~~of ~~will~~these ~~elect~~assumptions aon ~~lump~~historical ~~sum~~trends ~~payment~~and economic and ~~estimates~~market ofconditions ~~annuity~~at ~~pricing~~the time of valuation. ~~See~~In ~~Note~~accordance 18with ofU.S. ~~the~~GAAP, ~~Notes to~~actual ~~Consolidated~~results ~~Financial~~that ~~Statements~~differ ~~for~~from ~~additional~~these ~~information~~assumptions are accumulated and amortized over future periods. These differences impact future pension expense.

~~For~~See ~~the~~Note ~~following~~18 ~~discussion regarding sensitivity~~ of ~~assumptions,~~the ~~all amounts presented are in reference~~ Notes to ~~our~~Consolidated ~~domestic~~Financial ~~pension~~Statements ~~plans,~~for ~~since~~additional ~~our domestic plans comprise all of our pension plan assets and the majority of our pension plan expense~~information.

To determine the expected rate of return on pension plan assets, we consider such factors as (i) the actual return earned on plan assets, (ii) historical rates of return on the asset classes in the plan portfolio, (iii) projections of returns on those asset classes, (iv) capital market conditions and economic forecasts, and (v) administrative expenses paid with the plan assets. The rate of return on plan assets utilized in fiscal 2025 and 2024 was 5.5 percent and 6.5 percent, respectively. For fiscal 2026, we have assumed a rate of return of 5.5 percent. A change of 25 basis points in the expected rate of return on plan assets would impact our fiscal 2026 pension expense by less than $1 million.

The discount rate reflects rates available on high-quality fixed-income corporate bonds on the measurement date of March 31. For fiscal 2025 and 2024, for purposes of determining pension expense, we used a discount rate of 5.4 percent and 5.2 percent, respectively. We determined these rates based upon a yield curve that was created following an analysis of the projected cash flows for our plans. See Note 18 of the Notes to Consolidated Financial Statements for additional information. A change in the assumed discount rate of 25 basis points would impact our fiscal 2026 pension expense and projected benefit obligation by less than $1 million and approximately $4 million, respectively.

Income taxes

We operate in numerous taxing jurisdictions; therefore, we are subject to regular examinations by federal, state and non-U.S. taxing authorities. Due to the application of complex and sometimes ambiguous tax laws and rulings in the jurisdictions in which we do business, there is an inherent level of uncertainty within our worldwide tax provisions. Despite our belief that our tax return positions are consistent with applicable tax laws, it is possible that taxing authorities could challenge certain positions.

Our deferred tax assets and liabilities reflect temporary differences between the amount of assets and liabilities for financial and tax reporting purposes. We adjust these amounts to reflect changes in tax rates expected to be in effect when the temporary differences reverse. We record a valuation allowance if we determine it is more likely than not that the net deferred tax assets in a particular jurisdiction will not be realized. This determination, which is made on a legal entity-by-legal entity basis, involves judgment and the use of estimates and assumptions, including expectations of future taxable income and tax planning strategies. We believe the assumptions that we used are appropriate and result in a reasonable determination regarding the future realizability of deferred tax assets. However, future events or circumstances, such as lower-than-expected taxable income or unfavorable changes in the financial outlook of our operations in certain jurisdictions, could cause us to record additional valuation allowances.

Table of Contents

See Note 8 of the Notes to Consolidated Financial Statements for additional information regarding income taxes.

Loss reserves

We maintain liabilities and reserves for a number of loss exposures, including environmental remediation costs, product warranties, self-insurance costs, estimated credit losses associated with trade receivables, regulatory compliance matters, and litigation. Establishing loss reserves for these exposures requires the use of estimates and judgment to determine the risk exposure and ultimate potential liability. We estimate these reserve requirements by using consistent and suitable methodologies for the particular type of loss reserve being calculated. See Notes 15 and 20 of the Notes to Consolidated Financial Statements for additional information regarding product warranties and contingencies and litigation, respectively.

Table of Contents

Forward-Looking Statements

This report, including, but not limited to, the discussion under Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations, contains statements, including information about future financial performance, accompanied by phrases such as “believes,” “estimates,” “expects,” “plans,” “anticipates,” “intends,” and other similar “forward-looking” statements, as defined in the Private Securities Litigation Reform Act of 1995. Modine’s actual results, performance or achievements may differ materially from those expressed or implied in these statements, because of certain risks and uncertainties, including, but not limited to, those described under “Risk Factors” in Item 1A. in Part I. of this report and identified in our other public filings with the U.S. Securities and Exchange Commission. Other risks and uncertainties include, but are not limited to, the following:

Market ~~Risks~~risks

● The impact of potential adverse developments or disruptions in the global economy and financial markets, including impacts related to geopolitical tensions and military conflicts, including the conflict between the U.S. and Iran, inflation, energy costs, government incentive or funding programs, supply chain challenges, logistical disruptions, including those related to sea, land or air freight, tariffs, sanctions and other trade issues or cross-border trade restrictions~~, and military conflicts, including the conflicts in Ukraine and in the Middle East and tension in the Red Sea~~;

●

The impact of other economic, social and political conditions, changes, challenges and unrest, particularly in the geographic, product and financial markets where we and our customers operate and compete, including foreign currency exchange rate fluctuations; changes in interest rates; recession and recovery therefrom; and the general uncertainties about the impact of statutory, regulatory and/or policy changes, including those related to tax and trade that have been or may be implemented in the U.S. or abroad;

●

The impact of potential price increases associated with raw materials, including aluminum, copper, steel and stainless steel (nickel), and other purchased component inventory including, but not limited to, increases in the underlying material cost based upon the London Metal Exchange and related premiums or fabrication costs. These prices may be impacted by a variety of factors, including changes in trade laws and tariffs, the behavior of our suppliers and significant fluctuations in demand. This risk includes our ability to successfully manage our exposure and our ability to adjust product pricing in response to price increases, including through our quotation process or through contract provisions for prospective price adjustments, as well as the inherent lag in timing of such contract provisions;

● Our ability to be at the forefront of technological advances to differentiate ourselves from our competitors and provide innovative products and services to our customers, the impacts of any changes in or the adoption rate of technologies that we expect to drive sales growth, including those related to data center cooling ~~and electric vehicles~~, and the impacts of threats or changes to the market growth prospects for our customers;

●

Our ability to mitigate increases in labor costs and labor shortages;

Table of Contents

●

The impact of public health threats on the national and global economy, our business, suppliers (and the supply chain), customers, and employees; and

●

The impact of legislation, regulations, and government incentive programs, including those addressing climate change, on demand for our products and the markets we serve, including our ability to take advantage of opportunities to supply alternative new technologies to meet environmental and/or energy standards and objectives.

~~Operational Risks~~45

Table of Contents

Operational risks

●

The impact of problems, including logistic and transportation challenges, associated with suppliers meeting our quantity, quality, price and timing demands, and the overall health of our suppliers, including their ability and willingness to supply our volume demands if their production capacity becomes constrained;

●

The overall health of and pricing pressure from our customers in light of economic and market-specific factors and the potential impact on us from any deterioration in the stability or performance of any of our major customers;

●

Our ability to maintain current customer relationships and compete effectively for new business, including our ability to achieve profit margins acceptable to us by offsetting or otherwise addressing any cost increases associated with supply chain challenges and inflationary market conditions;

● The impact of product or manufacturing difficulties or operating inefficiencies, including any product or program launches, product transfer challenges and product warranty and liability claims;

●

The impact of delays or modifications initiated by major customers with respect to product or program launches, product applications or requirements, or timing of construction or development projects that incorporate our products and services;

●

Our ability to consistently structure our operations in order to develop and maintain a competitive cost base with appropriately skilled and stable labor, while also positioning ourselves geographically, so that we can continue to support our customers with the technical expertise and market-leading products they demand and expect from Modine;

● Our ability to effectively and efficiently manage our operations in response to sales volume changes, including maintaining adequate production capacity to meet demand in our growing businesses, particularly in our Data Centers business, while also completing restructuring activities and realizing the anticipated benefits thereof;

●

Costs and other effects of the investigation and remediation of environmental contamination; including when related to the actions or inactions of others and/or facilities over which we have no control;

●

Our ability to recruit and maintain talent, including personnel in managerial, leadership, operational and administrative functions;

●

Our ability to protect our proprietary information and intellectual property from theft or attack by internal or external sources;

● The impact of a substantial disruption, including any prolonged service outage, or material breach of our ITinformation technology systems, and any related delays, problems or costs;

●

Increasingly complex and restrictive laws and regulations and the costs associated with compliance therewith, including state and federal labor regulations, laws and regulations associated with being a U.S. public company, and other laws and regulations present in various jurisdictions in which we operate;

Table of Contents

●

Increasing emphasis by global regulatory bodies, customers, investors, and employees on environmental, social and corporate governance matters may impose additional costs on us, adversely affect our reputation, or expose us to new risks;

●

Work stoppages or interference at our facilities or those of our major customers and/or suppliers; and

●

The constant and increasing pressures associated with healthcare and associated insurance costs.

~~Strategic Risks~~46

●Table ~~Our ability to successfully realize anticipated benefits, including improved profit margins and cash flow, from strategic initiatives and our continued application~~ of ~~80/20 principles across our businesses;~~Contents

●Strategic ~~Our~~risks ~~ability~~related to ~~accelerate~~the ~~growth~~pending byReverse ~~identifying~~Morris ~~and~~Trust ~~executing~~transaction onwith ~~organic growth opportunities and acquisitions, and to efficiently and successfully integrate acquired businesses; and~~Gentherm

● Our ability to ~~successfully~~complete ~~exit~~the ~~portions~~pending ~~of our business that do not align with our strategic plans. Business dispositions involve risks, including~~ transaction~~-related~~ ~~and~~on ~~other~~the ~~costs,~~terms ~~damage to~~ or in the ~~loss~~time offrame ~~customer~~expected ~~relationships,~~by the ~~diversion of management’s attention from other business concerns~~parties, ~~and other effects of litigation, claims,~~ or ~~other~~at ~~obligations, including those that may be asserted against us in connection with disposed businesses.~~all;

~~Financial~~● ~~Risks~~The occurrence of any event that could give rise to the termination of the pending transaction;

●

Potential shareholder litigation in connection with the pending transaction or other litigation, settlements or investigations may affect the timing or occurrence of the pending transaction or result in significant costs of defense, indemnification and liability;

●

Our ability to obtain the anticipated tax treatment of the pending transaction;

●

Greater than expected difficulty in separating the businesses subject to the pending disposition from our other businesses; and

●

Disruption of management time from ongoing business operations due to the pending transaction, or other effects of the pending transaction on our relationship with our employees, customers, suppliers, or other counterparties.

Strategic risks related to business growth and optimization

●

Our ability to realize the sales growth and return on investments anticipated in our Data Centers business;

●

Our ability to identify and execute on other organic growth opportunities and acquisitions, and to efficiently and successfully integrate acquired businesses;

●

Our ability to successfully realize anticipated benefits, including improved profit margins and cash flow, from strategic initiatives and our continued application of 80/20 principles across our businesses; and

●

Our ability to successfully exit portions of our business that do not align with our strategic plans. Business dispositions involve risks, including transaction-related and other costs, damage to or the loss of customer relationships, the diversion of management’s attention from our other business concerns, and other effects of litigation, claims, or other obligations, including those that may be asserted against us in connection with disposed businesses.

Financial risks

●

Our ability to fund our global liquidity requirements efficiently for our current operations and meet our long-term commitments in the event of disruption in or tightening of the credit markets or extended recessionary conditions in the global economy;

●

The impact of increases in interest rates in relation to our variable-rate debt obligations;

●

The impact of changes in federal, state or local tax regulations that could have the effect of increasing our income tax expense;

●

Our ability to comply with the financial covenants in our credit agreements, including our leverage ratio (net debt divided by Adjusted EBITDA, as defined in our credit agreements) and our interest coverage ratio (Adjusted EBITDA divided by interest expense, as defined in our credit agreements);

●

The potential unfavorable impact of foreign currency exchange rate fluctuations on our financial results; and

Table of Contents

●

Our ability to effectively realize the benefits of deferred tax assets in various jurisdictions in which we operate.

Forward-looking statements are as of the date of this report; we do not assume any obligation to update any forward-looking statements.

Table of Contents

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

In the normal course of business, we are subject to market exposure from changes in foreign currency exchange rates, interest rates, commodity prices, credit risk and other market changes.

Foreign Currency Risk

We are subject to the risk of changes in foreign currency exchange rates due to our operations in foreign countries. We have manufacturing facilities in Brazil, Canada, China, India, Mexico, and throughout Europe. We also have joint ventures in China and South Korea. We sell and distribute products throughout the world and also purchase raw materials from suppliers in foreign countries. As a result, our financial results are affected by changes in foreign currency exchange rates and economic conditions in the foreign markets in which we do business. Whenever possible, we attempt to mitigate foreign currency risks on transactions with customers and suppliers in foreign countries by entering into contracts that are denominated in the functional currency of the entity engaging in the transaction. In addition, for certain transactions that are denominated in a currency other than the engaging entity’s functional currency, we may enter into foreign currency derivative contracts to further manage our foreign currency risk. In fiscal ~~2025~~2026, we recorded a net gain of ~~less than~~ $1 million within our statement of operations related to foreign currency derivative contracts. In addition, our consolidated financial results are impacted by the translation of revenue and expenses in foreign currencies into U.S. dollars. These translation impacts are primarily affected by changes in exchange rates between the U.S. dollar and ~~European currencies, primarily~~ the euro, ~~and~~ the British pound sterling, the Brazilian real, the Canadian dollar, and the Chinese yuan. In fiscal ~~2025~~2026, approximately 5047 percent of our sales were generated in countries outside the U.S. A change in foreign currency exchange rates will positively or negatively affect our sales; however, this impact will be offset, usually to a large degree, with a corresponding effect on our cost of sales and other expenses. In fiscal ~~2025~~2026, changes in foreign currency exchange rates ~~unfavorably~~favorably impacted our sales by $1863 million; however, the impact on our operating income was only $47 million. Foreign currency exchange rate risk can be estimated by measuring the impact of a near-term adverse movement of 10 percent in foreign currency exchange rates. If these rates were 10 percent higher or lower during fiscal ~~2025~~2026, there would not have been a material impact on our fiscal ~~2025~~2026 earnings.

We maintain ~~foreign currency-denominated debt obligations and~~ intercompany loans that are subject to foreign currency exchange risk. WeFrom ~~seek to mitigate this risk through maintaining offsetting positions between external and intercompany loans; however, from~~ time to time, we ~~also~~ enter into foreign currency derivative contracts to manage the associated currency exchange rate exposure. These derivative instruments are typically not accounted for as hedges, and accordingly, gains or losses on the derivatives are recorded in other income and expense in the consolidated statements of operations and typically offset the impact of foreign currency changes on the outstanding loans.

Interest Rate Risk

We seek to reduce the potential volatility of earnings that could arise from changes in interest rates. We generally utilize a mixture of debt maturities and both fixed-rate and variable-rate debt to manage exposure to changes in interest rates. Interest rates for ~~both~~ our term ~~loans~~loan and borrowings under our multi-currency revolving credit facility, including swingline borrowings, are variable and are currently based on either SOFR or EURIBOR, plus ~~137.5~~125 to 175 basis points, depending on our leverage ratio. As a result, we are subject to risk of fluctuations in SOFR and EURIBOR and changes in our leverage ratio, which would affect the variable interest rate on our term ~~loans~~loan and revolving credit facility and could create variability in interest expense.

As of March 31, ~~2025~~2026, our outstanding borrowings on the variable-rate term ~~loans~~loan and the revolving credit facility totaled $~~194~~195 million and $30150 million, respectively. Based upon our outstanding debt with variable interest rates at March 31, ~~2025~~2026, a 100-basis point increase in interest rates would increase our annual interest expense in fiscal ~~2026~~2027 by approximately $23 million.

4548

Table of Contents

Commodity Price and Supply Risk

To produce the products we sell, we purchase raw materials and supplies including aluminum, copper, steel and stainless steel (nickel), brass, refrigerants, and gases such as natural gas, helium, and nitrogen. In addition, we also purchase components and parts that are integrated into our end products.

We seek to mitigate commodity price risk primarily by adjusting product pricing in response to price increases. Our contracts with certain customers contain provisions that provide for prospective price adjustments based upon changes in raw material prices. These prospective price adjustments generally lag behind the actual raw material price fluctuations by three months or longer, and the contract provisions are limited to the underlying material cost based upon a relevant pricing source, such as the London Metal Exchange, American Metal Market, or Platts index, and typically exclude additional cost elements, such as related metals premiums and fabrication. In instances where the risk is not covered contractually, we seek to adjust product pricing in response to price increases, including through our quotation process and through price list increases. Nevertheless, we are still subject to the risk of price increases on commodities, components, and other goods and services that we purchase.

We regularly engage with our suppliers to ensure availability of purchased commodities and components and, where possible, we incorporate contractual volume protections to guarantee required supply levels. ~~While~~We ~~we do not currently anticipate significant shortages or delays from our key suppliers, we~~ are subject to supply risk, particularly with respect to sourcing of raw materials including aluminum, copper, steel and stainless steel (nickel), and certain third-party parts and components required to make our products. In light of the rapid growth in the data center market, demand for certain components that we purchase to manufacture our data center products is currently outpacing supplier capacity. We began experiencing supply shortages in the fourth quarter of fiscal 2026. These component shortages are negatively impacting our production schedules and are tempering our planned production ramp-up for certain data center products. We are actively working with our supply chain, including qualifying new vendors, to mitigate the supply constraints. Overall, we are exposed to the risk that our suppliers may not be able or willing to meet our supply requirements in light of various factors, such as changes in trade laws and tariffs, sharp increases in customer demand, capacity constraints, financial instability, or other circumstances.

We also purchase parts from suppliers that use our tooling to create the parts. In most instances, and for financial reasons, we do not have duplicate tooling for the manufacture of the purchased parts. As a result, we are exposed to the risk of a supplier being unable to provide the quantity or quality of parts that we require. Even in situations where suppliers are manufacturing parts without the use of our tooling, we face the challenge of obtaining consistently high-quality parts from suppliers that are financially stable. We manage supplier risk by leveraging internal and third-party tools to identify and mitigate higher-risk supplier situations.

Credit Risk

Credit risk represents the possibility of loss from a customer failing to make payment according to contract terms. Our principal credit risk consists of outstanding trade accounts receivable. At March 31, ~~2025~~2026, 4353 percent of our trade accounts receivable was concentrated with our top ten customers. These customers operate primarily in the data center cooling, commercial air conditioning and refrigeration, commercial vehicle, off-highway, and automotive and light vehicle markets and are influenced by similar market and general economic factors. In the past, credit losses from our customers have not been significant, nor have we experienced a significant increase in credit losses in connection with ~~the current~~ inflationary market conditions in recent years.

We manage credit risk through a focus on the following:

●

Cash and cash equivalents – We maintain our cash and short-term deposits with financial institutions with reputable credit ratings;

● Trade accounts receivable – Prior to granting credit, we evaluate each customer, taking into consideration the customer’s financial condition, payment experience and credit information. After credit is granted, we actively monitor the customer’s financial condition and applicable business news; and

● Pension assets – We have retained outside advisors to assist in the management of the assets in our pension plans. In making investment decisions, we utilize an established risk management protocol that focuses on protection of the plan assets against downside risk. In connection with the upcoming termination of our primary U.S. pension plan, we have sought to match the maturities of the plan assets with the anticipated funding requirements for the upcoming lump-sum offering and future benefit payments. We believe the plan assets are subject to appropriate investment policies and controls; and

Table of Contents

●

Insurance – We monitor our insurance providers to ensure they maintain financial ratings that are acceptable to us. We have not identified any concerns in this regard based upon our reviews.

Table of Contents

In addition, we are exposed to risks associated with price reduction pressures from our customers. If contractual price downs are unavoidable, we contemplate them in our overall strategy and adjust pricing as necessary to provide profit margins that are acceptable to us.

Economic and Market Risk

~~Economic~~We ~~risk~~operate ~~represents the possibility of loss resulting from economic instability~~ in ~~the~~numerous ~~U.S.~~countries orand ~~abroad, such as that caused by geopolitical uncertainly or pandemics, or downturns in markets in which we operate. We~~ sell a broad range of thermal ~~solution~~management ~~systems~~solutions and products to customers operating in diverse markets, including ~~the~~ data ~~center cooling~~centers, commercial, industrial, and building HVAC&R, and commercial vehicle, off-highway, and automotive and light vehicle. Economic ~~markets~~risk represents the possibility of loss resulting from economic instability in the U.S. or abroad.

~~Considering~~We ~~our~~are ~~global~~currently ~~presence,~~monitoring weeconomic ~~also~~and ~~encounter~~market risks ~~imposed~~related byto ~~trade~~geopolitical ~~restrictions,~~tensions ~~including~~and ~~tariffs,~~military ~~embargoes~~conflicts, ~~sanctions,~~including ~~and~~the conflict between the ~~like~~U. WeS. ~~continue~~and toIran, ~~pursue~~which ~~non-speculative~~could ~~opportunities~~negatively toimpact ~~mitigate~~or ~~these~~cause ~~economic~~significant ~~risks,~~business ~~and~~disruptions ~~capitalize,~~in ~~when~~the ~~possible,~~global onmarkets ~~changing~~that ~~market~~we ~~conditions~~operate in. WeThese ~~pursue~~conflicts ~~new~~and ~~market~~tensions ~~opportunities~~could ~~after~~result ~~careful~~in ~~consideration~~further ofincreases ~~the~~to ~~potential~~energy ~~associated~~and ~~risks~~fuel prices, shipping delays, and ~~benefits~~increased freight and manufacturing costs. ~~Successes~~We inalso ~~new~~encounter ~~markets~~risks ~~are~~imposed ~~dependent~~by ~~upon~~trade ~~our~~restrictions, ~~ability~~including totariffs, ~~commercialize~~embargoes, ~~our~~sanctions, ~~investments~~and the like. ~~Current~~There ~~examples~~is ofcurrently ~~new~~uncertainty ~~and~~regarding ~~emerging~~future ~~markets~~relationships ~~for~~between usthe ~~include~~U.S. ~~those~~and ~~related~~numerous toother ~~data centers~~countries, ~~indoor~~including ~~air~~China, ~~quality~~Canada, Mexico, and ~~Gensets. Our~~in ~~investments~~Europe, inwith ~~these~~respect ~~areas~~to trade policies and tariffs. We are ~~subject~~working to minimize the ~~risks~~impact ~~associated~~of ~~with~~tariffs ~~technological~~on ~~success,~~our ~~customer~~businesses. Where ~~and market acceptance~~applicable, ~~and~~such ~~our~~efforts ~~ability~~include torenegotiating ~~meet~~prices ~~the~~with ~~demands~~suppliers, ofadjusting ~~our~~product ~~customers~~pricing, asand ~~these~~diversifying ~~markets~~our ~~grow~~supplier base.

47We pursue new market opportunities after careful consideration of the potential associated risks and benefits. Successes in new markets are dependent upon our ability to commercialize our investments. Our investments in these areas are subject to the risks associated with technological success, customer and market acceptance, and our ability to meet the demands of our customers as these markets grow.

Table of Contents

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.

MODINE MANUFACTURING COMPANY

CONSOLIDATED STATEMENTS OF OPERATIONS

For the years ended March 31, ~~2025~~2026, ~~2024~~2025 and ~~2023~~2024

(In millions, except per share amounts)



	~~2025~~2026		~~2024~~2025		~~2023~~2024
Net sales	$	23,~~583~~181.51	$	2,~~407~~583.85	$	2,~~297~~407.98
Cost of sales		12,~~939~~450.70		1,~~882~~939.27		1,~~908~~882.52
Gross profit		~~643~~731.81		~~525~~643.68		~~389~~525.46
Selling, general and administrative expenses		~~332~~360.1		~~273~~332.91		~~234~~273.09
Restructuring expenses		2820.26		1528.02		515.0
Gain on sale of assets		—		(4.0)		—
Impairment charge		4.1		—		—
Operating income		283.5		240.7		150.4
Loss (gain) on sale of assets		3.9		—		(4.0)
Interest expense		(26.4)		(24.1)		(20.7)
Operating income		342.4		283.5		240.7
Other expense – net		(3.1)		(2.0)		(4.4)
Interest expense		(31.6)		(26.4)		(24.1)
Earnings before income taxes		254.0		214.6		125.3
Pension termination charge		(116.1)		—		—
(Provision) benefit for income taxes		(68.5)		(51.2)		28.3
Other expense – net		(8.2)		(3.1)		(2.0)
Net earnings		185.5		163.4		153.6
Earnings before income taxes		186.5		254.0		214.6
Net earnings attributable to noncontrolling interest		(1.5)		(1.9)		(0.5)
Provision for income taxes		(63.2)		(68.5)		(51.2)
Net earnings attributable to Modine	$	184.0	$	161.5	$	153.1
Net earnings		123.3		185.5		163.4
Net earnings attributable to noncontrolling interest		(1.8)		(1.5)		(1.9)
Net earnings attributable to Modine	$	121.5	$	184.0	$	161.5

Net earnings per share attributable to Modine shareholders:
Basic	$	32.5030	$	3.0850	$	23.9308
Diluted	$	32.4226	$	3.0342	$	23.9003

Weighted-average shares outstanding:
Basic		52.68		52.46		52.34
Diluted		53.98		53.49		5253.84

The notes to consolidated financial statements are an integral part of these statements.

4851

Table of Contents

MODINE MANUFACTURING COMPANY

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

For the years ended March 31, ~~2025~~2026, ~~2024~~2025 and ~~2023~~2024

(In millions)



	~~2025~~2026		~~2024~~2025		~~2023~~2024
Net earnings	$	~~185~~123.53	$	~~163~~185.45	$	~~153~~163.64
Other comprehensive income (loss):
Other comprehensive income (loss), net of income taxes:
Foreign currency translation		~~(14~~36.3)1		(514.63)		(185.96)
Defined benefit plans, net of income taxes of ($1.4), $1.6, and $1.1 million		(3.1)		3.7		6.7
Defined benefit plans		107.6		(3.1)		3.7
Cash flow hedges, net of income taxes of ($0.2), ($0.2), and $0 million		(0.8)		(0.7)		0.1
Cash flow hedges		0.8		(0.8)		(0.7)
Total other comprehensive income (loss)		~~(18~~144.2)5		(218.62)		(122.16)

Comprehensive income		~~167~~267.38		~~160~~167.83		~~141~~160.58
Comprehensive income attributable to noncontrolling interest		(1.2.1)		(1.62)		—(1.6)
Comprehensive income attributable to Modine	$	~~166~~265.17	$	~~159~~166.21	$	~~141~~159.52

The notes to consolidated financial statements are an integral part of these statements.

4952

Table of Contents

MODINE MANUFACTURING COMPANY

CONSOLIDATED BALANCE SHEETS

March 31, ~~2025~~2026 and ~~2024~~2025

(In millions, except per share amounts)


	~~2025~~2026		~~2024~~2025
ASSETS
Cash and cash equivalents	$	7173.65	$	6071.16
Trade accounts receivable – net		~~478~~731.90		~~422~~478.9
Inventories		~~340~~506.91		~~357~~340.9
Other current assets		69105.85		5369.18
Total current assets		~~961~~1,416.21		~~894~~961.02
Property, plant and equipment – net		~~390~~520.59		~~365~~390.75
Intangible assets – net		~~146~~197.70		~~188~~146.37
Goodwill		~~233~~292.91		~~230~~233.9
Deferred income taxes		6785.03		7567.10
Other noncurrent assets		~~118~~163.32		97118.53
Total assets	$	12,~~917~~674.6	$	1,~~851~~917.56

LIABILITIES AND SHAREHOLDERS’ EQUITY
Short-term debt	$	97.35	$	129.03
Long-term debt – current portion		4443.89		1944.78
Accounts payable		~~290~~464.8		~~283~~290.48
Accrued compensation and employee benefits		~~102~~95.71		~~101~~102.67
Other current liabilities		93117.46		~~129~~93.14
Total current liabilities		~~541~~728.09		~~545~~541.80
Long-term debt		~~296~~384.79		~~399~~296.97
Deferred income taxes		2425.16		3024.01
Pensions		2911.4		2729.74
Other noncurrent liabilities		~~108~~321.20		92108.62
Total liabilities		~~999~~1,471.48		~~1,096~~999.04
Commitments and contingencies (see Note 20)
Shareholders’ equity:
Preferred stock, $0.025 par value, authorized 16.0 million shares, issued – none		—		—
Common stock, $0.625 par value, authorized 80.0 million shares, issued 56.5 million and 56.1 million shares		35.3		35.0
Common stock, $0.625 par value, authorized 80.0 million shares, issued 57.0 million and 56.5 million shares		35.6		35.3
Additional paid-in capital		~~310~~336.81		~~283~~310.78
Retained earnings		~~843~~964.05		~~659~~843.0
Accumulated other comprehensive loss		(~~181~~37.31)		(~~163~~181.43)
Treasury stock, at cost, 4.1 million and 3.7 million shares		(97.6)		(66.7)
Treasury stock, at cost, 4.2 million and 4.1 million shares		(104.6)		(97.6)
Total Modine shareholders’ equity		~~910~~1,194.25		~~747~~910.62
Noncontrolling interest		8.03		78.90
Total equity		~~918~~1,202.28		~~755~~918.52
Total liabilities and equity	$	12,~~917~~674.6	$	1,~~851~~917.56

The notes to consolidated financial statements are an integral part of these statements.

5053

Table of Contents

MODINE MANUFACTURING COMPANY

CONSOLIDATED STATEMENTS OF CASH FLOWS

For the years ended March 31, ~~2025~~2026, ~~2024~~2025 and ~~2023~~2024

(In millions)



	~~2025~~2026		~~2024~~2025		~~2023~~2024
Cash flows from operating activities:
Net earnings	$	~~185~~123.53	$	~~163~~185.45	$	~~153~~163.64
Adjustments to reconcile net earnings to net cash provided by operating activities:
Depreciation and amortization		7779.7		5677.17		5456.51
Stock-based compensation expense		26.4		10.8		6.6
Impairment charge		4.1		—		—
Deferred income taxes		6.5		6.2		(59.6)
Loss (gain) on sale of assets		3.9		—		(4.0)
Gain on sale of assets		—		(4.0)		—
Pension termination charge		116.1		—		—
Other – net		6.9		6.1		4.8
Stock-based compensation expense		22.1		26.4		10.8
Changes in operating assets and liabilities:
Deferred income taxes		(39.1)		6.5		6.2
Trade accounts receivable		(61.2)		(8.3)		(40.7)
Other – net		7.0		6.9		6.1
Inventories		13.6		(17.3)		(49.4)
Changes in operating assets and liabilities:
Accounts payable		10.5		(59.1)		10.2
Trade accounts receivable		(222.6)		(61.2)		(8.3)
Accrued compensation and employee benefits		1.6		15.2		6.4
Inventories		(125.1)		13.6		(17.3)
Contract liabilities		(44.5)		58.3		10.3
Accounts payable		151.1		10.5		(59.1)
Other assets		15.3		12.0		19.6
Accrued compensation and employee benefits		(13.5)		1.6		15.2
Other liabilities		(25.0)		(24.8)		(8.8)
Contract liabilities		159.0		(44.5)		58.3
Net cash provided by operating activities		213.3		214.6		107.5
Other assets		(2.9)		15.3		12.0
Other liabilities		(14.4)		(25.0)		(24.8)
Net cash provided by operating activities		248.7		213.3		214.6

Cash flows from investing activities:
Expenditures for property, plant and equipment		(84143.03)		(8784.70)		(5087.7)
Payments for business acquisitions		(3.4)		(186.2)		—
Payments for business acquisitions, net of cash acquired		(182.4)		(3.4)		(186.2)
Purchase of TMGcore, Inc. technology and related assets (see Note 2)		—		(12.0)		—
Purchase of technology and related assets (see Note 2)		—		—		(12.0)
Proceeds from (payments for) disposition of assets		0.8		(0.8)		(0.38)
Other – net		—3.6		~~3.3~~—		—3.3
Net cash used for investing activities		(86321.63)		(~~283~~86.46)		(50283.4)

Cash flows from financing activities:
Borrowings of debt		~~414~~829.56		~~332~~414.5		~~374~~332.35
Repayments of debt		(~~496~~745.39)		(~~260~~496.43)		(~~403~~260.4)
(Repayments) borrowings on bank overdraft facilities – net		(0.7)		6.3		3.0
(Repayments) borrowings on bank overdrafts – net		(5.0)		(0.7)		6.3
Purchases of treasury stock		(307.90)		(1730.79)		(917.07)
Dividends paid to noncontrolling interest		(1.18)		(01.51)		(0.65)
Other – net		03.92		20.59		2.45
Net cash (used for) provided by financing activities		(113.6)		62.7		(33.3)
Net cash provided by (used for) financing activities		73.1		(113.6)		62.7

Effect of exchange rate changes on cash		(1.5)3		(01.85)		(2.0.8)
Net increase (decrease) in cash, cash equivalents and restricted cash		111.68		(611.9)6		21(6.89)

Cash, cash equivalents and restricted cash – beginning of period		6071.39		6760.23		4567.42
Cash, cash equivalents and restricted cash – end of period	$	7173.97	$	6071.39	$	6760.23

The notes to consolidated financial statements are an integral part of these statements.

5154

Table of Contents

MODINE MANUFACTURING COMPANY

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

For the years ended March 31, ~~2025~~2026, ~~2024~~2025 and ~~2023~~2024

(In millions)


								Accumulated
				Additional				other		Treasury		Non-
	Common stock			paid-in		Retained		comprehensive		stock, at		controlling
	Shares	Amount		capital		earnings		loss		cost		interest		Total
Balance, March 31, 2022	54.8	$	34.2	$	261.6	$	344.4	$	(149.5)	$	(40.0)	$	7.4	$	458.1
Balance, March 31, 2023	55.4	$	34.6	$	270.8	$	497.5	$	(161.1)	$	(49.0)	$	6.8	$	599.6
Net earnings	—		—		—		153.1		—		—		0.5		153.6
Other comprehensive loss	—		—		—		—		(11.6)		—		(0.5)		(12.1)
Stock options and awards	0.6		0.4		2.6		—		—		—		—		3.0
Purchases of treasury stock	—		—		—		—		—		(9.0)		—		(9.0)
Stock-based compensation expense	—		—		6.6		—		—		—		—		6.6
Dividend paid to noncontrolling interest	—		—		—		—		—		—		(0.6)		(0.6)
Balance, March 31, 2023	55.4		34.6		270.8		497.5		(161.1)		(49.0)		6.8		599.6
Net earnings	—		—		—		161.5		—		—		1.9		163.4
Other comprehensive loss	—		—		—		—		(2.3)		—		(0.3)		(2.6)
Stock options and awards	0.7		0.4		2.1		—		—		—		—		2.5
Purchases of treasury stock	—		—		—		—		—		(17.7)		—		(17.7)
Stock-based compensation expense	—		—		10.8		—		—		—		—		10.8
Dividend paid to noncontrolling interest	—		—		—		—		—		—		(0.5)		(0.5)
Balance, March 31, 2024	56.1		35.0		283.7		659.0		(163.4)		(66.7)		7.9		755.5
Net earnings	—		—		—		184.0		—		—		1.5		185.5
Other comprehensive loss	—		—		—		—		(17.9)		—		(0.3)		(18.2)
Stock options and awards	0.4		0.3		0.7		—		—		—		—		1.0
Purchases of treasury stock	—		—		—		—		—		(30.9)		—		(30.9)
Stock-based compensation expense	—		—		26.4		—		—		—		—		26.4
Dividends paid to noncontrolling interest	—		—		—		—		—		—		(1.1)		(1.1)
Dividend paid to noncontrolling interest	—		—		—		—		—		—		(1.1)		(1.1)
Balance, March 31, 2025	56.5	$	35.3	$	310.8	$	843.0	$	(181.3)	$	(97.6)	$	8.0	$	918.2
Net earnings	—		—		—		121.5		—		—		1.8		123.3
Other comprehensive income	—		—		—		—		144.2		—		0.3		144.5
Stock options and awards	0.5		0.3		3.2		—		—		—		—		3.5
Purchases of treasury stock	—		—		—		—		—		(7.0)		—		(7.0)
Stock-based compensation expense	—		—		22.1		—		—		—		—		22.1
Dividends paid to noncontrolling interest	—		—		—		—		—		—		(1.8)		(1.8)
Balance, March 31, 2026	57.0	$	35.6	$	336.1	$	964.5	$	(37.1)	$	(104.6)	$	8.3	$	1,202.8

The notes to consolidated financial statements are an integral part of these statements.

5255

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

Note 1: Significant Accounting Policies

Nature of operations

Modine Manufacturing Company (“Modine” or the “Company”) specializes in providing innovative and environmentally responsible thermal management products and solutions to diversified global markets and customers in a wide array of commercial, industrial, and building heating, ventilating, air conditioning, and refrigeration (“HVAC&R”) markets. In addition, the Company is a leading provider of engineered heat transfer systems and high-quality heat transfer components for use in on- and off-highway original equipment manufacturer (“OEM”) vehicular applications. The Company’s primary product groups include i) ~~data~~Data ~~center cooling~~Centers; ii) ~~heat~~Heat ~~transfer~~Transfer Solutions; iii) HVAC&R Technologies; iv) ~~air~~Heavy-~~cooled;~~Duty ~~v) liquid-cooled~~Equipment; and viv) ~~advanced~~On-Highway ~~solutions~~Applications.

Acquisitions and dispositions

The Company accounts for acquired businesses using the acquisition method. Under the acquisition method, the Company records assets acquired and liabilities assumed at their respective fair values. If the assets acquired do not constitute a business, the Company accounts for the transaction as an asset acquisition. For asset purchases, the Company allocates the purchase price to the underlying assets based on their relative fair values.

During fiscal 2024, the Company acquired Scott Springfield Mfg. Inc., a Canadian-based manufacturer of air handling units, and substantially all of the net operating assets of Napps Technology Corporation, a Texas-based manufacturer of air- and water-cooled chillers, condensing units and heat pumps. In addition, the Company purchased intellectual property related to liquid immersion cooling technology from TMGcore, Inc. Also during fiscal 2024, the Company sold three automotive businesses based in Germany and two coatings facilities in the United States.

See Note 2 for information regarding the Company’s acquisitions and dispositions.

Basis of presentation

The Company prepares its consolidated financial statements in conformity with generally accepted accounting principles (“GAAP”) in the United States. These principles require management to make certain estimates and assumptions in determining assets, liabilities, revenue, expenses and related disclosures. Actual amounts could differ materially from those estimates.

Consolidation principles

The consolidated financial statements include the accounts of Modine Manufacturing Company and its majority-owned or Modine-controlled subsidiaries. The Company eliminates intercompany transactions and balances in consolidation.

Revenue recognition

The Company recognizes revenue based upon consideration specified in a contract and as it satisfies performance obligations by transferring control over its products to its customers, which may be at a point in time or over time. The majority of the Company’s revenue is recognized at a point in time, based upon shipment terms. ~~A portion of the Company’s revenue is recognized over time, based upon estimated progress towards satisfaction of the contractual performance obligations.~~ See Note 3 for additional information.

Shipping and handling costs

The Company records shipping and handling costs incurred upon the shipment of products to its customers in cost of sales, and related amounts billed to these customers in net sales.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

Trade accounts receivable

The Company records trade receivables at the invoiced amount. Trade receivables do not bear interest if paid according to the original terms. The Company maintains an allowance for credit losses, representing its estimate of expected losses associated with its trade accounts receivable. The Company bases its estimate using historical loss experience and considers the aging of the receivables and risks specific to customers where appropriate. At March 31, 2025 and 2024, the allowance for credit losses was $1.8 million and $2.7 million, respectively. The changes to the Company’s allowance for credit losses during fiscal 2025 and 2024 were not material and primarily consisted of current-period provisions, write-offs charged against the allowance, recoveries collected, and foreign currency translation.

The Company enters into supply chain financing programs from time to time to sell accounts receivable, without recourse, to third-party financial institutions. Sales of accounts receivable are reflected as a reduction of accounts receivable on the consolidated balance sheets and the proceeds are included in cash flows from operating activities in the consolidated statements of cash flows. During fiscal 2025, 2024, and 2023, the Company sold $7.9 million, $130.2 million, and $150.6 million, respectively, of accounts receivable to accelerate cash receipts. During fiscal 2025, 2024, and 2023, the Company recorded costs totaling $0.1 million, $1.6 million, and $1.2 million, respectively, related to selling accounts receivable in the consolidated statements of operations.

Warranty

The Company provides product warranties for specific product lines and accrues for estimated future warranty costs in the period in which the sale is recorded. The Company records warranty expense, within cost of sales, based upon historical and current claims data or based upon estimated future claims. Accrual balances, which are recorded within other current liabilities, are monitored and adjusted if it is probable that expected claims will differ from previous estimates. See Note 15 for additional information.

Tooling

The Company accounts for production tooling costs as a component of property, plant and equipment when it owns title to the tooling and amortizes the capitalized cost to cost of sales over the estimated life of the asset, which is generally three years. At March 31, ~~2025~~2026 and ~~2024~~2025, Company-owned tooling totaled $1816.27 million and $1618.12 million, respectively.

In certain instances, tooling is owned by the customer. At the time customer-owned tooling is completed and customer acceptance is obtained, the Company records tooling revenue and related production costs within net sales and cost of sales, respectively, in the consolidated statements of operations. If the customer has agreed to reimburse the Company, unbilled customer-owned tooling costs are recorded as a receivable within other current assets. No significant arrangements exist where customer-owned tooling costs were not accompanied by guaranteed reimbursement. At March 31, ~~2025~~2026 and ~~2024~~2025, customer-owned tooling receivables totaled $62.96 million and $7.6.9 million, respectively.

~~Stock-based compensation~~56

The Company recognizes stock-based compensation using the fair value method. Accordingly, compensation expense for stock options, restricted stock and performance-based stock awards is calculated based upon the fair value of the instruments at the time of grant and is recognized as expense over the respective vesting periods. See Note 5 for additional information.

Research and development

The Company expenses research and development costs as incurred within selling, general, and administrative (“SG&A”) expenses. During fiscal 2025, 2024, and 2023, research and development costs totaled $34.9 million, $42.0 million, and $44.0 million, respectively.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

Stock-based compensation

The Company recognizes stock-based compensation using the fair value method. Accordingly, compensation expense for restricted stock, stock options and performance-based stock awards is calculated based upon the fair value of the instruments at the time of grant and is recognized as expense over the respective vesting periods. See Note 5 for additional information.

Research and development

The Company expenses research and development costs as incurred within selling, general and administrative (“SG&A”) expenses. During fiscal 2026, 2025 and 2024, research and development costs totaled $29.3 million, $34.9 million, and $42.0 million, respectively.

Translation of foreign currencies

The Company translates assets and liabilities of foreign subsidiaries into U.S. dollars at the period-end exchange rates and translates income and expense items at the monthly average exchange rate for the period in which the transactions occur. The Company reports resulting translation adjustments within accumulated other comprehensive income (loss) within shareholders’ equity. The Company includes foreign currency transaction gains or losses in the statement of operations within other income and expense.

Derivative instruments

The Company enters into derivative financial instruments from time to time to manage certain financial risks. The Company enters into forward contracts to reduce exposure to changing future purchase prices for aluminum and copper and into foreign currency exchange contracts to hedge specific foreign currency-denominated assets and liabilities as well as forecasted transactions. The Company designates certain derivative financial instruments as cash flow hedges for accounting purposes. These instruments are used to manage financial risks and are not speculative. See Note 19 for additional information.

Income taxes

The Company determines deferred tax assets and liabilities based upon the difference between the amounts reported in the financial statements and the tax basis of assets and liabilities, using enacted tax rates in effect in the years in which the differences are expected to reverse. The Company establishes a valuation allowance if it is more likely than not that a deferred tax asset, or portion thereof, will not be realized. The Company records the tax effects of global intangible low-taxed income (“GILTI”) as a period expense in the applicable tax year. The Company uses the portfolio approach for releasing income tax effects from accumulated other comprehensive income (loss). See Note 8 for additional information.

Earnings per share

The Company calculates basic earnings per share based upon the weighted-average number of common shares outstanding during the period, while the calculation of diluted earnings per share includes the dilutive effect of potential common shares outstanding during the period. The calculation of diluted earnings per share excludes potential common shares if their inclusion would have an anti-dilutive effect. See Note 9 for additional information.

Cash and cash equivalents

The Company considers all highly-liquid investments with original maturities of three months or less to be cash equivalents.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

Trade accounts receivable

The Company records trade receivables at the invoiced amount. Trade receivables typically do not bear interest if paid according to the original terms. The Company maintains an allowance for credit losses, representing its estimate of expected losses associated with its trade accounts receivable. The Company bases its estimate using historical loss experience and considers the aging of the receivables and risks specific to customers where appropriate. At March 31, 2026 and 2025, the allowance for credit losses was $3.5 million and $1.8 million, respectively. The changes to the Company’s allowance for credit losses during fiscal 2026 and 2025 were not material and primarily consisted of current-period provisions, write-offs charged against the allowance, recoveries collected, and foreign currency translation.

The Company enters into supply chain financing programs from time to time to sell accounts receivable, without recourse, to third-party financial institutions. Sales of accounts receivable are reflected as a reduction of accounts receivable on the consolidated balance sheets and the proceeds are included in cash flows from operating activities in the consolidated statements of cash flows. During fiscal 2026, 2025 and 2024, the Company sold $2.2 million, $7.9 million, and $130.2 million, respectively, of accounts receivable to accelerate cash receipts. During fiscal 2024, the Company recorded costs totaling $1.6 million related to selling accounts receivable in the consolidated statements of operations. During fiscal 2026 and 2025, costs related to selling accounts receivable were not significant.

Inventories

The Company values inventories using a first-in, first-out or weighted-average basis, at the lower of cost and net realizable value.

Property, plant and equipment

The Company records property, plant and equipment at cost. For financial reporting purposes, the Company computes depreciation using the straight-line method over the expected useful lives of the assets. The Company expenses maintenance and repair costs as incurred. The Company capitalizes costs of improvements. Upon the sale or other disposition of an asset, the Company removes the cost and related accumulated depreciation from the accounts and includes the gain or loss in the consolidated statements of operations. Capital expenditures of $2233.46 million, $22.74 million, and $1322.67 million were accrued within accounts payable at March 31, ~~2025~~2026, ~~2024~~2025 and ~~2023~~2024, respectively.

Leases

The Company’s most significant leases represent leases of real estate, such as manufacturing facilities, warehouses, and office buildings. The Company also leases manufacturing and information technology equipment and vehicles. The Company recognizes right-of-use (“ROU”) assets and lease liabilities at the lease commencement date, based upon the present value of lease payments over the lease term. See Note 16 for additional information.

55Goodwill

The Company does not amortize goodwill; rather, it tests for impairment annually unless conditions exist that would require a more frequent evaluation. The Company performs an assessment of the fair value of its reporting units for goodwill impairment testing based upon, among other things, the present value of expected future cash flows. The Company performed its goodwill impairment tests as of February 28, 2026 and determined the fair value of each of its reporting units exceeded the respective book value. See Note 14 for additional information.

Impairment of long-lived assets

The Company evaluates held and used long-lived assets, including property, plant and equipment and intangible assets, for impairment whenever conditions or events indicate that those assets may be impaired. The Company considers factors such as operating losses, declining financial outlooks and market conditions when evaluating the need for an impairment analysis. In the event an impairment indicator is identified, the Company compares the undiscounted future cash flows expected to be generated by the assets with their carrying value. If the net asset values exceed expected future cash flows, the Company writes down the assets to fair value and records an impairment charge. The Company estimates fair value in various ways depending on the nature of the underlying assets. Fair value is generally based upon appraised value, estimated salvage value, or selling prices under negotiation, as applicable.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

Goodwill

The Company does not amortize goodwill; rather, it tests for impairment annually unless conditions exist that would require a more frequent evaluation. The Company performs an assessment of the fair value of its reporting units for goodwill impairment testing based upon, among other things, the present value of expected future cash flows. The Company performed its goodwill impairment tests as of February 28, 2025 and determined the fair value of each of its reporting units exceeded the respective book value. See Note 14 for additional information.

Impairment of held and used long-lived assets

The Company evaluates long-lived assets, including property, plant and equipment and intangible assets, for impairment whenever conditions or events indicate that those assets may be impaired. The Company considers factors such as operating losses, declining financial outlooks and market conditions when evaluating the need for an impairment analysis. In the event an impairment indicator is identified, the Company compares the undiscounted future cash flows expected to be generated by the assets with their carrying value. If the net asset values exceed expected future cash flows, the Company writes down the assets to fair value and records an impairment charge. The Company estimates fair value in various ways depending on the nature of the underlying assets. Fair value is generally based upon appraised value, estimated salvage value, or selling prices under negotiation, as applicable.

Assets held for sale

The Company classifies an asset as held for sale when (i) management approves and commits to a formal plan to actively market the asset for sale at a reasonable price in relation to its fair value; (ii) the asset is available for immediate sale in its present condition; (iii) an active program to locate a buyer and other actions required to complete the sale have been initiated; (iv) the sale of the asset is expected to be completed within one year; and (v) it is unlikely that significant changes will be made to the plan. Upon classification as held for sale, the Company records the carrying value of the asset at the lower of its carrying value or its estimated fair value, less costs to sell. In addition, the Company ceases to record depreciation for assets held for sale. In fiscal 2026, the Company recorded a non-cash impairment charge of $4.1 million related to assets held for sale. See Note 2 for additional information.

Deferred compensation trusts

The Company maintains deferred compensation trusts to fund future obligations under its non-qualified deferred compensation plans. The trusts’ investments in third-party debt and equity securities are presented within other noncurrent assets in the consolidated balance sheets. The deferred compensation obligations are recorded within other noncurrent liabilities in the consolidated balance sheets.

Self-insurance reserves

The Company retains a portion of the financial risk for certain insurance coverage, including property, general liability, workers compensation, and employee healthcare, and therefore maintains reserves that estimate the impact of unreported and under-reported claims that fall below stop-loss limits and deductibles under its insurance policies. The Company maintains reserves for the estimated settlement cost of known claims, as well as estimates of incurred but not reported claims. The Company charges costs of claims, including the impact of changes in reserves due to claim experience and severity, to cost of sales or SG&A expenses. The Company reviews and updates the amount of its insurance-related reserves on a quarterly basis.

Environmental liabilities

The Company records liabilities for environmental assessments and remediation activities in the period in which its responsibility is probable and the costs can be reasonably estimated. The Company records environmental indemnification assets from third parties, including prior owners, when recovery is probable. To the extent that the required remediation procedures change, or additional contamination is identified, the Company’s estimated environmental liabilities may also change. See Note 20 for additional information.

Supplier finance programs

The Company facilitates a voluntary supplier finance program through a financial institution that allows certain suppliers in the U.S. and Europe to request early payment for invoices, at a discount, from the financial institution. The Company or the financial institution may terminate the supplier finance program upon 90 days’ notice. The Company’s obligations to its suppliers, including amounts due and payment terms, are consistent, irrespective of whether a supplier participates in the program. The Company is not party to the arrangements between the participating suppliers and the financial institution. Under this program, the Company confirms the validity of supplier invoices to the financial institution and remits payments to it based on the original payment terms, which typically range from 60 to 120 days. The outstanding obligations under this program are included within accounts payable in the consolidated balance sheets.

The following table presents a roll forward of the Company’s obligations associated with its supplier finance program.


	Years ended March 31,
	2026			2025
Obligations outstanding – beginning of period	$	15.5		$	23.6
Invoices submitted		115.6			102.2
Invoices paid		(109.5)			(110.3)
Obligations outstanding – end of period	$	21.6		$	15.5

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

Supplier finance programs

The following table presents a roll forward of the Company’s obligations associated with its supplier finance program.


	Years ended March 31,
	2025		2024
Obligations outstanding – beginning of period	$	23.6	$	21.2
Invoices submitted		102.2		109.7
Invoices paid		(110.3)		(107.3)
Obligations outstanding – end of period	$	15.5	$	23.6

Supplemental cash flow information


	Years ended March 31,
	2025		2024		2023
Interest paid	$	26.0	$	23.3	$	18.4
Income taxes paid		55.2		46.9		31.9

See Note 16 for supplemental cash flow information related to the Company’s leases.

New accounting guidance

Segment reporting disclosures

In November 2023, the Financial Accounting Standards Board (“FASB”) issued new disclosure guidance for reportable segments. The new guidance requires disclosure of significant segment expenses, which are expenses that are (i) significant to the segment, (ii) regularly provided to the chief operating decision maker (“CODM”) and (iii) included in the reported measure of segment profit or loss. In addition, the new guidance requires companies to disclose the title and position of their CODM and expand interim disclosures to include the majority of the annual segment disclosures. The definition of and method for determining reportable segments is unchanged. The Company adopted this guidance for its fiscal 2025 annual financial statements. See Note 22 for additional information on the Company’s reportable segments.

Disaggregation of Income Statement Expenses

In November 2024, the FASB issued new guidance that will require additional disclosure regarding the nature of expenses presented within expense captions on the consolidated statements of operations and selling expenses. The new disclosure requirements will become effective for the Company’s fiscal 2028 annual financial statements. The Company is currently evaluating the new disclosures, but does not expect the guidance will have a material impact on its consolidated financial statements.

57Note 2: Acquisitions and Dispositions

The Company accounts for acquired businesses using the acquisition method and records assets acquired and liabilities assumed at their respective fair values. The excess of the purchase price over the allocated amount is recorded as goodwill.

Fiscal 2026 Acquisitions

The Company acquired three businesses during fiscal 2026: AbsolutAire, Inc. (“AbsolutAire”), LBW Holding Corp. (“L.B. White”), and Climate by Design International (“Climate by Design”). Since the date of each acquisition, the Company has reported the financial results of these businesses within the Climate Solutions segment. During fiscal 2026, the operating results for the acquired companies were not material. The Company has not presented supplemental pro forma financial information for these acquisitions since they are not material, individually or in the aggregate, to the Company’s consolidated financial statements.

AbsolutAire

On April 1, 2025, the Company acquired substantially all of the net operating assets of AbsolutAire for consideration totaling $11.3 million. AbsolutAire is a Michigan-based manufacturer of direct-fired heating, ventilation, and make-up air systems. This acquisition supports the Company’s growth strategy by expanding its heating and indoor air quality product portfolios and also broadens its customer base in the commercial, industrial, food service, and warehousing sectors. During fiscal 2026, the Company included net sales of $24.8 million within its consolidated statement of operations attributable to AbsolutAire.

The Company’s allocation of the purchase price for its acquisition of AbsolutAire was as follows:


Trade accounts receivable	$	3.4
Inventories		3.9
Property, plant and equipment		2.8
Intangible assets		2.2
Goodwill		1.1
Accounts payable		(1.2)
Accrued compensation and employee benefits		(0.4)
Other liabilities		(0.5)
Purchase price	$	11.3

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

~~Note~~ The Company recorded $2~~: Acquisitions~~.2 million of intangible assets, including customer relationship and ~~Dispositions~~trade name assets. The Company is amortizing the acquired intangible assets using a weighted-average life of approximately eleven years. The Company allocated the excess of the purchase price over the net assets recognized to goodwill in the amount of $1.1 million, which is expected to be deductible for income tax purposes.

Acquisition of Scott Springfield Mfg. Inc.

On March 1, 2024, the Company acquired all of the issued and outstanding shares in the capital of Scott Springfield Mfg. Inc. (“Scott Springfield Manufacturing”) for consideration totaling $184.1 million. Upon finalization of the working capital adjustment during fiscal 2025, the Company paid an additional $2.4 million to the seller.

Based in Calgary, Canada, Scott Springfield Manufacturing is a leading manufacturer of air handling units to customers in the data center, telecommunications, healthcare, and aerospace markets. This acquisition expanded the Company’s product offerings and customer base in the high-growth data center and indoor air quality markets in the U.S. and Canada. Since the date of the acquisition, the Company has reported the financial results of the Scott Springfield Manufacturing business within the Climate Solutions segment. For fiscal 2024 and 2025, the Company included net sales of $7.9 million and $241.7 million, respectively, within its consolidated statements of operations attributable to Scott Springfield Manufacturing.

During fiscal 2024 and 2025, the Company recorded $2.1 million and $0.4 million, respectively, of costs directly related to the acquisition and integration of Scott Springfield Manufacturing as SG&A expenses within its consolidated statements of operations. The fiscal 2024 costs principally consisted of fees for i) transaction advisors, ii) legal, accounting, and other professional services, and iii) incremental costs directly associated with integration activities. The fiscal 2025 costs principally consisted of costs associated with integration activities. In addition, the Company charged $1.6 million to cost of sales during both fiscal 2024 and 2025 in connection with an inventory fair value adjustment.

The Company completed its accounting for the acquisition of Scott Springfield Manufacturing during fiscal 2025 and allocated the purchase price of $184.1 million to the identifiable tangible and intangible assets acquired and the liabilities assumed based upon their estimated fair values as of the acquisition date. The Company allocated the excess of the purchase price over the net assets recognized to goodwill in the amount of $72.6 million, none of which is expected to be deductible for income tax purposes. During the first quarter of fiscal 2025, the Company completed its market and trade name analyses and recorded a measurement period adjustment to reduce the fair value of the trade name intangible asset by $9.6 million. This adjustment resulted in a corresponding decrease in the deferred income tax liability of $2.2 million and a $7.4 million increase to the $65.2 million of goodwill preliminarily recorded as of March 31, 2024. Goodwill represents the future economic benefits arising from other assets acquired that could not be individually identified and separately recognized. Specifically, the goodwill recorded as part of the acquisition includes Scott Springfield Manufacturing’s workforce and anticipated future revenue and cost synergies.

~~The~~L.B. ~~Company’s~~White ~~purchase price allocation for its acquisition of Scott Springfield Manufacturing was as follows:~~


Cash and cash equivalents	$	0.3
Trade accounts receivable		27.5
Inventories		20.9
Property, plant and equipment		6.0
Intangible assets		92.7
Goodwill		72.6
Other assets		4.0
Accounts payable		(8.6)
Accrued compensation and employee benefits		(1.3)
Deferred income taxes		(22.2)
Other liabilities		(7.8)
Purchase price	$	184.1

On May 31, 2025, the Company acquired all of the issued and outstanding shares of L.B. White for consideration totaling $110.5 million ($107.7 million net of cash acquired). The Company primarily utilized its revolving credit facility to fund the purchase price.

Headquartered in Wisconsin, with additional manufacturing and distribution operations in Georgia, L.B. White is a leading provider of specialty heating solutions, including direct-fired forced air, radiant, indirect-fired, and electric heating solutions, for the agriculture, construction, and special event industries. L.B. White holds a leading position in the swine and poultry agricultural heating markets in North America and is a market leader in portables heating. This acquisition expands the Company’s product portfolio and also broadens its network into adjacent heating markets. During fiscal 2026, the Company included net sales of $63.8 million within its consolidated statement of operations attributable to L.B. White.

The Company’s allocation of the purchase price for its acquisition of L.B. White was as follows:


Cash and cash equivalents	$	2.8
Trade accounts receivable		10.2
Inventories		17.1
Property, plant and equipment		15.9
Intangible assets		50.1
Goodwill		27.1
Other assets		1.0
Accounts payable		(1.8)
Accrued compensation and employee benefits		(1.9)
Deferred income taxes		(8.3)
Other liabilities		(1.7)
Purchase price	$	110.5

58The Company engaged third-party valuation specialists to assist in estimating the fair value of assets acquired. The third-party valuations utilized assumptions developed by management and other information compiled by management, including, but not limited to, future expected cash flows. The Company allocated the excess of the purchase price over the net assets recognized to goodwill in the amount of $27.1 million, none of which is expected to be deductible for income tax purposes. Goodwill represents the future economic benefits arising from other assets acquired that could not be individually identified and separately recognized. The goodwill recorded as part of the acquisition includes L.B. White’s workforce and anticipated future revenue and cost synergies.

Below is a summary of the methodologies and significant assumptions used within the third-party valuations for estimating the fair value of certain classes of acquired assets. The fair values were primarily based upon significant inputs that are not observable in the market and thus represent Level 3 measurements. See Note 4 for information regarding Level 3 fair value measurements.

Inventories: The Company determined the fair value of acquired work-in-process and finished goods inventory using both the comparative sales and cost of reproduction valuation methods. For raw materials acquired, the Company estimated the cost of replacement. In total, the Company wrote-up acquired inventory by $1.0 million and charged it to cost of sales during fiscal 2026 as the underlying inventory was sold.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

Property, plant and equipment: The ~~following~~Company ~~unaudited~~valued ~~supplemental~~the ~~pro~~land ~~forma~~and ~~information~~facilities ~~presents~~acquired using the ~~Company’s~~cost ~~consolidated~~approach. The ~~results~~cost ofapproach ~~operations~~included asconsideration ~~though~~of ~~the~~recent ~~acquisition~~sales of ~~Scott~~comparable ~~Springfield~~land ~~Manufacturing~~parcels ~~had~~and ~~occurred~~estimated atreplacement ~~the~~costs ~~beginning~~for structures and site improvements, adjusting such values for estimated depreciation as of ~~fiscal~~the ~~2023~~acquisition date. ~~This~~The ~~pro~~cost ~~forma~~approach ~~financial~~relies ~~information~~on isassumptions ~~presented~~regarding ~~for~~replacement ~~illustrative~~costs ~~purposes~~and ~~only~~the age and isestimated ~~not~~remaining ~~considered~~useful tolives beof ~~indicative~~the assets. For personal property, which primarily consists of machinery and equipment assets, the ~~operating~~Company ~~results~~utilized the market valuation approach that ~~would~~considers ~~have~~values ~~been~~for ~~achieved~~similar ~~had~~assets ~~the~~on ~~acquisition~~secondary ~~been~~equipment ~~completed~~markets. The asfair value of ~~the~~property, ~~date~~plant ~~indicated~~and orequipment will be recognized as depreciation expense in the ~~operating~~Company’s results ~~that~~of ~~may~~operations beover ~~obtained~~the inexpected remaining useful lives of the ~~future~~assets.

Intangible assets: The Company determined the fair value of acquired intangible assets by using variations of the income approach. These methods generally forecast expected future net cash flows associated with each of the identified intangible assets and adjust the forecasts to present value by applying a discount rate intended to reflect risk factors associated with the cash flows and the time value of money. Acquired intangible assets were as follows:


	Gross Carrying Value	~~Years ended March 31,~~		Weighted- Average Useful Life
		2024			2023
Customer relationships	$	38.5		14 years
Net sales		$	2,507.5		$	2,346.2
Trade name		11.6		20 years
Net earnings attributable to Modine			165.3			127.3
Total intangible assets acquired	$	50.1

~~The~~Customer ~~supplemental~~relationships ~~pro~~represent ~~forma~~the ~~financial~~estimated ~~information~~fair ~~above~~value isof ~~based~~L.B. ~~upon the Company~~White’s ~~historical~~business ~~results~~relationships ~~and~~with ~~the~~existing ~~historical~~customers, ~~results~~the majority of ~~Scott Springfield Manufacturing,~~ which ~~have~~are ~~been~~dealers ~~translated~~and/or ~~from~~distributors ~~Canadian~~in ~~dollars to U.S. dollars using~~ the ~~historical~~agriculture ~~average~~and ~~foreign~~portable ~~exchange~~heating ~~rates~~markets. The ~~proforma~~fair ~~information~~value ~~includes~~of ~~adjustments~~customer ~~for:~~relationships ~~(i) annual~~was ~~amortization~~determined ~~and~~using ~~depreciation~~the ~~expense~~multi-period ~~totaling~~excess ~~approximately~~earnings ~~$19.0 million for fiscal 2023 and approximately $8.0 million for fiscal 2024 for acquired tangible and intangible assets~~method, ~~(ii) estimated~~in ~~annual~~which ~~interest~~the ~~expense~~value ofis ~~approximately~~derived ~~$6.0~~by ~~million~~projecting ~~resulting from acquisition-related borrowings, and (iii)~~ the ~~estimated~~future ~~income~~anticipated after-tax ~~impacts~~cash ~~related~~flows attributable to the ~~pro~~customer ~~forma adjustments, considering the statutory tax rates within Canada~~relationships. InKey ~~addition,~~inputs ~~the~~used ~~pro~~in ~~forma~~the ~~financial~~valuation ~~information~~included ~~assumes~~future ~~that~~revenue ~~both~~growth ~~$2.0 million of acquisition-related transaction costs~~rates, ~~not~~customer ~~including~~attrition ~~costs for integration-related activities~~rates, and ~~$3.2~~discount ~~million of inventory purchase accounting adjustments were incurred during fiscal 2023~~rates. ~~The pro forma financial information does not reflect any expected revenue or cost synergies.~~

~~Purchase~~The Company determined the estimated fair value of ~~TMGcore~~the acquired L.B. White trade name using the relief-from-royalty method, ~~Inc~~ which applies an assumed royalty rate to revenue expected to be derived under the acquired trade name. The ~~intellectual~~fair ~~property~~value was estimated to be the present value of the royalties saved because the Company owns the trade name.

InClimate ~~January 2024,~~by ~~the~~Design Company purchased intellectual property and other specific assets from TMGcore, Inc., a specialist in single- and two-phase liquid immersion cooling technology for data centers for $12.0 million. The Company allocated $11.4 million of the purchase price to acquired technology and the remaining $0.6 million to property, plant, and equipment.

~~Acquisition~~On July 1, 2025, the Company acquired Climate by Design for $64.4 million ($63.4 million net of ~~Napps~~cash ~~Technology~~acquired). The ~~Corporation~~Company primarily utilized its revolving credit facility to fund the purchase price.

OnBased ~~July 1,~~in ~~2023~~Minnesota, ~~the~~Climate ~~Company~~by ~~acquired~~Design ~~substantially~~specializes ~~all~~in ofdesiccant ~~the~~dehumidification ~~net~~technology ~~operating~~and ~~assets~~critical ofprocess ~~Napps Technology Corporation (“Napps”), a Texas-based manufacturer of~~ air- ~~and water-cooled chillers, condensing units and heat pumps, for consideration totaling $5~~handlers.~~8 million.~~ ~~The~~This ~~Company~~acquisition ~~paid~~supports ~~$4.8 million during fiscal 2024 and paid~~ the ~~remaining $1.0 million to the seller during fiscal 2025. The~~ Company’s ~~has~~growth ~~reported~~strategy ~~the~~by ~~financial~~expanding ~~results~~its ofcommercial ~~the~~indoor ~~Napps~~air ~~business~~quality ~~within~~product ~~the Climate Solutions segment since the date of the acquisition~~portfolio. ~~For~~ During fiscal ~~2024 and 2025~~2026, the Company included ~~net sales of~~ $430.5 million ~~and~~of ~~$10.8~~net ~~million,~~sales ~~respectively,~~ within its consolidated ~~statements~~statement of operations attributable to ~~Napps~~Climate by Design.

Disposition of two coatings facilities

In September 2023, the Company sold two coatings facilities, located in California and Florida, to Protecall, LLC. Sales from these two businesses, which provided aftermarket application services, totaled $6.4 million in fiscal 2023. As a result of this transaction, the Company wrote-off $0.7 million of goodwill attributable to the disposed businesses and recorded a gain on sale of less than $0.1 million during fiscal 2024.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

~~Disposition~~The Company’s allocation of ~~Germany~~the ~~automotive~~purchase ~~businesses~~price for its acquisition of Climate by Design was as follows:

Prior to the disposition, the Company reported the financial results of the disposal group within its Performance Technologies segment. Net sales of the disposal group included within the Company’s consolidated statements of operations for fiscal 2024 and 2023 totaled $54.2 million and $79.0 million, respectively.

Pending disposition of facilities in Germany

In December 2024, the Company signed a definitive agreement to sell its technical service center and administrative support facility in Germany to a real estate investment firm for €11.5 million ($12.4 million). Earlier in fiscal 2025, the Company closed the technical service center and reduced headcount in light of the sale of three automotive businesses in Germany during fiscal 2024. The Company expects the sale transaction will close during the first half of fiscal 2026, subject to remaining closing conditions. The Company expects to record a gain on sale, net of costs to sell, of approximately $3.0 million when the transaction is completed. As of March 31, 2025, the Company classified $8.2 million of building and related assets expected to transfer to the buyer as held for sale and presented them within other current assets on its consolidated balance sheet.

Fiscal 2026 acquisition of AbsolutAire, Inc.


Cash and cash equivalents	$	1.0
Trade accounts receivable		7.3
Inventories		10.1
Property, plant and equipment		10.5
Intangible assets		15.0
Goodwill		23.6
Other assets		10.4
Accounts payable		(1.8)
Accrued compensation and employee benefits		(1.0)
Other liabilities		(10.7)
Purchase price	$	64.4

On April 1, 2025, the Company acquired substantially all of the net operating assets of AbsolutAire, Inc. (“AbsolutAire”). The Company paid $11.2 million upon transaction closing. The final purchase price is pending and may be adjusted for net working capital. AbsolutAire is a Michigan-based manufacturer of direct-fired heating, ventilation, and make-up air systems. This acquisition supports the Company’s growth strategy by expanding its heating and indoor air quality product portfolios and also broadens its customer base in the commercial, industrial, food service, and warehousing sectors. AbsolutAire had annual sales of approximately $25.0 million in 2024 and will be reported within the Company’s Climate Solutions segment beginning in the first quarter of fiscal 2026.

The Company engaged third-party valuation specialists to assist in estimating the fair value of assets acquired. The third-party valuations utilized assumptions developed by management and other information compiled by management, including, but not limited to, future expected cash flows. The Company allocated the excess of the purchase price over the net assets recognized to goodwill in the amount of $23.6 million. Goodwill represents the future economic benefits arising from other assets acquired that could not be individually identified and separately recognized. The goodwill recorded as part of the acquisition includes Climate by Design’s workforce and anticipated future revenue and cost synergies. Goodwill is expected to be deductible for income tax purposes.

Inventories: The Company estimated the fair value of acquired work-in-process and finished goods inventory using both the comparative sales and cost of reproduction valuation methods. For raw materials acquired, the Company estimated the cost of replacement. The Company wrote-up acquired inventory by $0.3 million. The Company charged the write-up to cost of sales during fiscal 2026 as the underlying inventory was sold.

Intangible assets: The Company estimated the fair value of acquired intangible assets by using variations of the income approach. These methods generally forecast expected future net cash flows associated with each of the identified intangible assets and adjust the forecasts to present value by applying a discount rate intended to reflect risk factors associated with the cash flows and the time value of money. Acquired intangible assets were as follows:


	Gross Carrying Value		Weighted- Average Useful Life
Customer relationships	$	8.3	10 years
Acquired technology		3.5	10 years
Trade name		3.2	10 years
Total intangible assets acquired	$	15.0

Customer relationships represent the estimated fair value of Climate by Design’s business relationships with existing customers. The fair value of customer relationships was estimated using the multi-period excess earnings method, in which the value is derived by projecting the future anticipated after-tax cash flows attributable to the customer relationships. Key inputs used in the valuation included future revenue growth rates, customer attrition rates, and discount rates.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

The Company estimated the fair value of the acquired Climate by Design technology using the relief-from-royalty method, considering estimated royalties that would hypothetically be paid to use the technology.

The Company estimated the fair value of the acquired Climate by Design trade name using the relief-from-royalty method, which applies an assumed royalty rate to revenue expected to be derived under the acquired trade name. The fair value was estimated to be the present value of the royalties saved because the Company owns the trade name.

Fiscal 2024 Acquisitions

The Company acquired the Scott Springfield Mfg. Inc. (“Scott Springfield Manufacturing”) and Napps Technology Corporation (“Napps”) businesses during fiscal 2024. In addition, the Company purchased intellectual property and related assets from TMGcore, Inc.

Scott Springfield Manufacturing

On March 1, 2024, the Company acquired all of the issued and outstanding shares in the capital of Scott Springfield Manufacturing for consideration totaling $184.1 million. Upon finalization of the working capital adjustment during fiscal 2025, the Company paid an additional $2.4 million to the seller. Based in Calgary, Canada, Scott Springfield Manufacturing is a leading manufacturer of air handling units to customers in the data center, telecommunications, healthcare, and aerospace markets. This acquisition expanded the Company’s product offerings and customer base in the high-growth data center and indoor air quality markets in the U.S. and Canada. Since the date of the acquisition, the Company has reported the financial results of the Scott Springfield Manufacturing business within the Climate Solutions segment.

Napps

On July 1, 2023, the Company acquired substantially all of the net operating assets of Napps, a Texas-based manufacturer of air- and water-cooled chillers, condensing units and heat pumps, for consideration totaling $5.8 million. The Company paid $4.8 million during fiscal 2024 and paid the remaining $1.0 million to the seller during fiscal 2025. The Company has reported the financial results of the Napps business within the Climate Solutions segment since the date of the acquisition.

TMGcore, Inc. intellectual property

In January 2024, the Company purchased intellectual property and other related assets from TMGcore, Inc., a specialist in single- and two-phase liquid immersion cooling technology for data centers for $12.0 million.

Dispositions

During fiscal 2022, the Company sold its Austrian automotive business. To facilitate the closing of this sale, the Company provided the buyer with a loan facility. During the fourth quarter of fiscal 2026, the Company and the buyer settled the loan facility for less than the principal balance outstanding. As a result, the Company recorded a loss of $3.9 million during fiscal 2026 to write-off the remaining loan receivable. The Company has reported this loss within the loss on sale of assets line on its consolidated statement of operations.

In October 2023, the Company sold three automotive businesses based in Germany (the “disposal group”) to affiliates of Regent, L.P. As a result of the sale, the Company recorded a $4.0 million gain on sale during fiscal 2024, primarily driven by the net liability position of the disposal group at the time of sale. In addition, the gain on sale included the write-off of $0.6 million of net actuarial gains related to the disposal group’s pension plans. The Company reported the $4.0 million gain on the gain on sale of assets line within the consolidated statement of operations. Prior to the disposition, the Company reported the financial results of the disposal group within the Performance Technologies segment. Net sales of the disposal group included within the Company’s consolidated statement of operations for fiscal 2024 totaled $54.2 million.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

Pending Reverse Morris Trust transaction

In January 2026, the Company and Gentherm Incorporated (“Gentherm”) announced that they had entered into definitive agreements whereby the Company will spin-off and simultaneously combine its Performance Technologies segment businesses with Gentherm in a Reverse Morris Trust transaction. Gentherm, a Michigan-based corporation, is a global leader of innovative thermal management and pneumatic comfort technologies. The transaction is intended to establish Gentherm as a scaled leader in thermal management. The Company will retain its Climate Solutions segment businesses, creating a pure-play climate solutions company focused on the data center and commercial HVAC&R markets.

Under the terms of the agreements, at the time of the spin-off of its Performance Technologies segment businesses, the Company’s shareholders will receive newly-issued Gentherm stock, representing ownership of approximately 40 percent of the combined company. In addition, immediately prior to transaction closing, the Company is to receive cash proceeds of $210.0 million, subject to adjustment. Based upon the Gentherm stock price, the transaction was valued at approximately $1.0 billion when the Company entered into the agreement. The Company anticipates this transaction will close by the end of calendar 2026, subject to approval by Gentherm’s shareholders and other closing conditions, including regulatory approvals. Under the Reverse Morris Trust structure, the transaction is intended to be generally tax-free for U.S. federal income tax purposes for the Company and its shareholders.

Since the pending spin-off does not constitute a sale under U.S. GAAP, the Company has not classified the assets and liabilities of its Performance Technologies segment as held for sale on its March 31, 2026 consolidated balance sheet. However, the Company expects to classify the Performance Technologies segment as a discontinued operation starting in the period the transaction is completed.

Pending sale of facilities in Germany

In fiscal 2025, the Company signed a definitive agreement to sell its technical service center and administrative support facility in Germany to a real estate investment firm. The Company closed the technical service center earlier in fiscal 2025 and reduced headcount in light of the sale of three automotive businesses in Germany during fiscal 2024. During fiscal 2026 and based upon a lower expected selling price of approximately $5.0 million in light of market and other transaction-specific factors, the Company estimated an implied loss in excess of the building and related assets’ carrying value. As a result, the Company recorded a non-cash impairment charge of $4.1 million during fiscal 2026. As of March 31, 2026 and 2025, the Company classified $4.6 million and $8.2 million, respectively, of building and related assets as held for sale and presented them within other current assets on its consolidated balance sheets. The Company expects the sale transaction will close during fiscal 2027.

Note 3: Revenue Recognition

The Company sells thermal management products and solutions in a wide array of commercial, industrial, and building HVAC&R markets. In addition, the Company sells engineered heat transfer systems and high-quality heat transfer components for use in on- and off-highway original OEM vehicular applications. The Company recognizes revenue based upon consideration specified in a contract and as it satisfies performance obligations by transferring control over its products to its customers, which may be at a point in time or over time. As the majority of the underlying sales contracts for its highly-specified products do not provide the Company with an enforceable right to payment for performance completed to date in the event of cancellation, the Company recognizes the majority of its revenue at a point in time, based upon shipment terms. For the limited number of customer contracts that provide an enforceable right to payment for performance completed to date, the Company recognizes revenue over time based upon its estimated progress toward satisfaction of the performance obligations.

The Company records an allowance for credit losses and accrues for estimated warranty costs at the time of sale. These estimates are based upon historical experience, current business trends, and current economic conditions. The Company accounts for shipping and handling activities as fulfillment costs rather than separate performance obligations and records shipping and handling costs in cost of sales and related amounts billed to customers in net sales. The Company establishes payment terms with its customers based upon industry and regional practices, which typically do not exceed 90 days. As the Company expects to receive payment from its customers within one year from the time of sale, it disregards the effects of the time value of money in its determination of the transaction price. The Company has not disclosed the value of unsatisfied performance obligations because the revenue associated with customer contracts for which the original expected performance period is greater than one year is immaterial.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

The following is a description of the Company’s principal revenue-generating activities:

Climate Solutions

The Climate Solutions segment provides energy-efficient, climate-controlled solutions and components for a wide array of applications. The Climate Solutions segment ~~sells~~has ~~data~~aligned ~~center~~its ~~cooling~~teams ~~solutions,~~around ~~heat~~three ~~transfer~~product ~~products~~groups: i) Data Centers, ii) Heat Transfer Solutions and iii) HVAC&R ~~products~~Technologies. The Data ~~center~~Centers business provides sustainable cooling solutions for data center customers. Data center products include ITchillers, ~~cooling~~dry ~~solutions~~coolers, ~~including~~ precision air ~~conditioning~~handling units, ~~for data center applications;~~ computer room air conditioning and ~~computer room~~ air handler units;, ~~hybrid~~ fan ~~coils; fan~~ walls;, ~~chillers; condensers; condensing units; and liquid cooling solutions for high~~rear-~~density~~door ~~computing~~heat exchangers, ~~including~~ coolant distribution units (“CDU”) and immersion solutions. The Heat ~~transfer~~Transfer ~~products~~Solutions ~~include~~business provides heat exchanger coils, ~~and~~anti-corrosion coating products, ~~that~~commercial ~~extend~~and ~~the~~industrial ~~life~~refrigeration ofproducts ~~equipment~~ and ~~components~~power bygeneration ~~protecting~~and ~~against~~transmission ~~corrosion~~cooling solutions. ~~Heating~~The HVAC Technologies business provides a wide array of commercial and residential heating products, ~~include~~including unit heaters, roof-mounted ~~direct- and indirect-fired~~ makeup air units, duct furnaces, infrared units, and perimeter heating products. ~~Indoor~~In ~~air quality products include ventilation and air conditioning products~~addition, ~~such~~the asHVAC ~~single~~Technologies ~~packaged~~business ~~unit~~sells ~~ventilators,~~indoor ~~modular chillers,~~ air ~~handler~~quality ~~units, condensing units and ceiling cassettes. Refrigeration~~ products ~~include~~for ~~evaporator~~schools ~~unit coolers, remote condensers~~ and ~~fluid,~~commercial ~~gas, dry, and brine coolers~~applications. ~~In addition, the segment provides products to the industrial power generation markets.~~

For the majority of its sales, individual customer purchase orders represent the Climate Solutions segment’s contract with its customers and the segment recognizes revenue when it transfers control over its products to its customers, based upon shipment terms. Heating products are largely sold to independent distributors in the U.S., who in turn market the heating products to end customers. The Climate Solutions segment recognizes coatings product sales over-time, since the customers control the equipment being enhanced by the coating application. In addition, for sales to customers whose contract cancellation terms provide an enforceable right to payment for customized products and solutions, the Climate Solutions segment recognizes revenue over time based upon its estimated progress toward satisfaction of the performance obligations.

Performance Technologies

The Performance Technologies segment ~~provides~~has ~~products~~aligned ~~and~~its ~~solutions~~teams ~~that~~around ~~enhance~~two ~~the~~product ~~performance~~groups: ofi) ~~customer~~Heavy-Duty ~~applications~~Equipment and ~~develops~~ii) ~~solutions~~On-Highway ~~that provide mission critical energy for a variety of end market applications~~Applications. The ~~Performance~~Heavy-Duty ~~Technologies~~Equipment ~~segment~~business ~~designs~~provides ~~and~~heat ~~manufactures~~exchangers ~~products~~ and ~~solutions~~cooling ~~using~~modules ~~air-cooled~~for ~~and liquid~~off-~~cooled~~highway ~~technology for vehicular~~markets, ~~stationary~~including ~~power,~~agricultural and ~~industrial applications~~construction. In addition, the ~~Performance~~Heavy-Duty ~~Technologies~~Equipment ~~segment~~business ~~provides~~sells ~~advanced~~cooling ~~thermal~~module ~~solutions~~generator tosets ~~zero-emission~~that ~~and~~provide ~~hybrid commercial vehicle and off~~mission-~~highway~~critical ~~customers~~stationary power. ~~Air~~The On-~~cooled~~Highway ~~products~~Applications ~~consist~~business ~~primarily~~provides ofheat ~~powertrain~~exchangers ~~cooling~~and ~~products, such as radiators, condensers, engine~~ cooling ~~modules,~~systems ~~charge~~for ~~air~~commercial ~~coolers~~vehicle, ~~fan shrouds~~automotive, ~~and~~bus ~~surge tanks;~~ and ~~cooling~~specialty ~~module~~vehicle ~~generator sets~~customers. ~~Liquid-cooled~~In ~~products~~addition ~~include~~to ~~engine~~products ~~oil~~for ~~coolers,~~traditional ~~EGR coolers~~powertrains, ~~liquid~~the ~~charge~~On-Highway ~~air~~Applications ~~coolers,~~business ~~transmission~~provides ~~and~~products ~~retarder oil coolers, chillers,~~ and ~~condensers. The segment’s advanced~~ solutions ~~include~~for ~~battery~~zero-emission ~~thermal management systems, electronics cooling packages,~~ and ~~battery~~hybrid ~~chillers~~vehicles.

While the Performance Technologies segment provides customized production and service parts to customers under multi-year agreements, these agreements typically do not contain contractually-guaranteed volumes to be purchased by the customer. As a result, individual purchase orders typically represent the quantities ordered by the customer. With the exception of a small number of customers, the terms within the customer agreement, purchase order, or customer-owned tooling contract do not provide the Company with an enforceable right to payment for performance completed to date. As a result, the Performance Technologies segment recognizes revenue primarily at the time control is transferred to the customer based upon shipping terms, which is generally upon shipment.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

Disaggregation of revenue

The tables below present revenue for each of the Company’s operating segments, Climate Solutions and Performance Technologies. Each segment’s revenue is disaggregated by product group and by geographic location.

Effective April 1, ~~2024~~2025, ~~the~~and ~~Company~~in ~~moved~~connection ~~its~~with ~~Coatings~~the ~~business,~~Company’s ~~which~~strategic ~~was~~transformation ~~previously managed by~~ and ~~reported~~application ~~within~~of ~~the~~80/20 ~~Performance Technologies segment~~principles, ~~under~~ the ~~leadership~~Company ofrealigned ~~the~~its ~~Climate~~segment ~~Solutions~~teams ~~segment. See~~around ~~Note~~five 22market-based ~~for~~product ~~additional~~groups, ~~segment~~as ~~financial~~summarized ~~information~~above. ~~The~~Accordingly, the disaggregated revenue information presented in the tables below ~~for~~reflect the current product group structure. The fiscal ~~2024~~2025 and ~~2023~~2024 information has been recast to be comparable with the fiscal ~~2025~~2026 presentation.


	Year ended March 31, ~~2025~~2026
	Climate		Performance		Segment
	Solutions		Technologies		Total
Product groups:
Data center cooling	$	644.2	$	—	$	644.2
Data Centers	$	1,112.1	$	—	$	1,112.1
Heat transfer		402.9		—		402.9
Heat Transfer Solutions		584.1		—		584.1
HVAC&R		393.5		—		393.5
HVAC Technologies		359.2		—		359.2
Air-cooled		—		609.0		609.0
Heavy-Duty Equipment		—		409.3		409.3
Liquid-cooled		—		404.5		404.5
On-Highway Applications		—		716.4		716.4
Advanced solutions		—		129.4		129.4
Inter-segment sales		6.9		6.1		13.0
Inter-segment sales		0.2		20.6		20.8
Net sales	$	2,062.3	$	1,131.8	$	3,194.1
Net sales	$	1,440.8	$	1,163.5	$	2,604.3

Geographic location:
Americas	$	~~997~~1,535.85	$	~~695~~593.68	$	12,~~693~~129.43
Europe		~~415~~501.84		~~295~~336.98		~~711~~838.72
Asia		2725.24		~~172~~201.02		~~199~~226.26
Net sales	$	12,~~440~~062.83	$	1,~~163~~131.58	$	23,~~604~~194.31


	Year ended March 31, ~~2024~~2025
	Climate		Performance		Segment
	Solutions		Technologies		Total
Product groups:
Data center cooling	$	294.2	$	—	$	294.2
Data Centers	$	644.2	$	—	$	644.2
Heat transfer		473.4		—		473.4
Heat Transfer Solutions		539.4		—		539.4
HVAC&R		340.5		—		340.5
HVAC Technologies		257.0		—		257.0
Air-cooled		—		681.2		681.2
Heavy-Duty Equipment		—		422.1		422.1
Liquid-cooled		—		491.6		491.6
On-Highway Applications		—		720.8		720.8
Advanced solutions		—		126.9		126.9
Inter-segment sales		0.2		20.6		20.8
Inter-segment sales		—		21.6		21.6
Net sales	$	1,440.8	$	1,163.5	$	2,604.3
Net sales	$	1,108.1	$	1,321.3	$	2,429.4

Geographic location:
Americas	$	~~649~~997.08	$	~~721~~695.06	$	1,~~370~~693.04
Europe		~~432~~415.78		~~406~~295.89		~~839~~711.57
Asia		2627.42		~~193~~172.50		~~219~~199.92
Net sales	$	1,~~108~~440.18	$	1,~~321~~163.35	$	2,~~429~~604.43

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)


	Year ended March 31, ~~2023~~2024
	Climate		Performance		Segment
	Solutions		Technologies		Total
Product groups:
Data center cooling	$	173.8	$	—	$	173.8
Data Centers	$	294.2	$	—	$	294.2
Heat transfer		541.3		—		541.3
Heat Transfer Solutions		606.4		—		606.4
HVAC&R		341.0		—		341.0
HVAC Technologies		207.5		—		207.5
Air-cooled		—		658.6		658.6
Heavy-Duty Equipment		—		463.3		463.3
Liquid-cooled		—		483.9		483.9
On-Highway Applications		—		836.4		836.4
Advanced solutions		—		99.3		99.3
Inter-segment sales		—		21.6		21.6
Inter-segment sales		0.6		25.7		26.3
Net sales	$	1,108.1	$	1,321.3	$	2,429.4
Net sales	$	1,056.7	$	1,267.5	$	2,324.2

Geographic location:
Americas	$	~~615~~649.40	$	~~664~~721.60	$	1,~~280~~370.0
Europe		~~416~~432.37		~~397~~406.28		~~813~~839.5
Asia		2526.04		~~205~~193.75		~~230~~219.79
Net sales	$	1,~~056~~108.71	$	1,~~267~~321.53	$	2,~~324~~429.24

Contract balances

Contract assets and contract liabilities from contracts with customers were as follows:


	March 31, ~~2025~~2026		March 31, ~~2024~~2025
Contract assets	$	1343.36	$	1213.93
Contract liabilities		35194.15		7935.41

Contract assets, included within other current assets in the consolidated balance sheets, primarily consist of ~~capitalized costs related to customer-owned tooling contracts, wherein the customer has guaranteed reimbursement, and~~ assets recorded for revenue recognized over time, which represent the Company’s rights to consideration for work completed but not yet billed, and capitalized costs related to customer-owned tooling contracts, wherein the customer has guaranteed reimbursement. The $030.43 million increase in contract assets during fiscal ~~2025~~2026 primarily resulted from an increase in contract assets for revenue recognized over time, partially offset by a decrease in capitalized costs related to ~~customer-owned~~the ~~tooling~~Company’s ~~contracts~~fulfillment of its performance obligations.

Contract liabilities primarily consist of customer deposits. During March 2026, ~~included~~the ~~within~~Company ~~other~~entered ~~current~~into ~~liabilities~~a inlong-term capacity agreement with one of its strategic data center customers. In connection with this agreement, the ~~consolidated~~Company ~~balance~~received ~~sheets~~a $165.0 million up-front deposit from the customer to support the Company’s investments necessary to meet the planned sales volume. In addition, ~~consist~~the ofcontract liabilities include payments received in advance of satisfying performance obligations under customer contracts, including contracts for data center ~~cooling~~ products and customer-owned tooling. The $44159.34 million ~~decrease~~increase in contract liabilities during fiscal ~~2025~~2026 primarily resulted from the aforementioned up-front deposit to support production capacity expansion. Contract liabilities are included within other current and noncurrent liabilities on the Company’s ~~satisfaction~~consolidated balance sheets. As of ~~performance~~March ~~obligations~~31, ~~under~~2026, ~~contracts~~contract ~~that~~liabilities ~~had~~included ~~required~~within ~~advanced~~other ~~payments~~current and noncurrent liabilities totaled $23.9 million and $170.6 million, ~~largely~~respectively. As ~~associated~~of ~~with~~March ~~long~~31, ~~inventory~~2025, ~~lead~~contract ~~times~~liabilities included within other current and noncurrent liabilities totaled $33.2 million and $1.9 million, respectively.

~~Note 4: Fair Value Measurements~~

Fair value is defined as the price that would be received for an asset or paid to transfer a liability in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants. Fair value measurements are classified under the following hierarchy:

~~● Level 1 – Quoted prices for identical instruments in active markets.~~

● Level 2 – Quoted prices for similar instruments in active markets; quoted prices for identical or similar instruments in markets that are not active; and model-derived valuations in which all significant inputs are observable in active markets.68

● Level 3 – Model-derived valuations in which one or more significant inputs are not observable.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

Note 4: Fair Value Measurements

●

Level 1 – Quoted prices for identical instruments in active markets.

●

Level 2 – Quoted prices for similar instruments in active markets; quoted prices for identical or similar instruments in markets that are not active; and model-derived valuations in which all significant inputs are observable in active markets.

●

Level 3 – Model-derived valuations in which one or more significant inputs are not observable.

When available, the Company uses quoted market prices to determine fair value and classifies such measurements as Level 1. In some cases, where market prices are not available, the Company uses observable market-based inputs to calculate fair value, in which case the measurements are classified as Level 2. If quoted or observable market prices are not available, the Company determines fair value based upon valuation models that use, where possible, market-based data such as interest rates, yield curves or currency rates. These measurements are classified as Level 3.

The carrying values of cash, cash equivalents, restricted cash, trade accounts receivable, accounts payable, and short-term debt approximate fair value due to the short-term nature of these instruments. In addition, the Company assesses the fair value of a disposal group for each reporting period it is held for sale. See Note 2 for additional information regarding assets held for sale. The fair value of the Company’s long-term debt is disclosed in Note 17.

The Company holds investments in deferred compensation trusts to fund obligations under certain non-qualified deferred compensation plans. The Company records the fair value of these investments within other noncurrent assets on its consolidated balance sheets. The Company classifies money market investments held by the trusts within Level 2 of the valuation hierarchy. The Company classifies all other investments held by the trusts within Level 1 of the valuation hierarchy, as it uses quoted market prices to determine the investments’ fair value. The Company’s deferred compensation obligations, which are recorded as other noncurrent liabilities, are recorded at the fair values of the investments held by the trust. At March 31, ~~2025~~2026 and ~~2024~~2025, the fair values of the investments and obligations for the Company’s deferred compensation plans each totaled $68.13 million and $46.1 million, respectively.

During fiscal 2026 and in connection with the previously-announced plan termination, the Company terminated its primary U.S. pension plan, and as a result, has no plan assets as of March 31, 2026. See Note 18 for additional information. Plan assets related to the Company’s pension plans, as of March 31, 2025, were classified as follows:


	March 31, 2025
	Level 1		Level 2		Total

Money market investments	$	—	$	2.7	$	2.7
Fixed income securities		—		51.3		51.3
U.S. government and agency securities		—		87.0		87.0
Other		1.4		8.4		9.8
Fair value excluding investments measured at net asset value		1.4		149.4		150.8
Investments measured at net asset value						—
Total fair value					$	150.8


	March 31, ~~2024~~2025
	Level 1		Level 2		Total

Money market investments	$	—	$	62.7	$	62.7
Fixed income securities		—		4551.3		4551.3
Pooled equity funds		7.0		—		7.0
U.S. government and agency securities		—		87.0		87.0
U.S. government and agency securities		—		57.0		57.0
Other		1.4		8.4		9.8
Other		1.1		5.7		6.8
Total fair value	$	1.4	$	149.4	$	150.8
Fair value excluding investment measured at net asset value		8.1		114.7		122.8
Investments measured at net asset value						27.7
Total fair value					$	150.5

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

The Company determined the fair value of money market investments to approximate their net asset values, without discounts for credit quality or liquidity restrictions, and classified them within Level 2 of the valuation hierarchy. The Company determined the fair value of ~~pooled equity funds based upon quoted prices from active markets and classified them within Level 1 of the valuation hierarchy. The Company determined the fair value of~~ fixed income securities and U.S. government and agency securities based upon recent bid prices or the average of recent bid and asking prices when available and, if not available, the Company valued them through matrix pricing models developed by sources considered by management to be reliable. The Company classified these assets within Level 2 of the valuation hierarchy. As of March 31, 2025 ~~and 2024~~, the Company held no Level 3 assets within its pension plans.

As a practical expedient, the Company valued certain investments, including pooled equity, fixed income and real estate funds, using their net asset value (“NAV”) per unit, and therefore, has not classified these investments within the fair value hierarchy. As of March 31, 2025 the Company no longer has investments valued at NAV.

Note 5: Stock-Based Compensation

The Company’s stock-based ~~incentive~~compensation programs consist of the following: (i) a long-term incentive plan (“LTIP”) for officers and other executives that authorizes grants of stock awards, stock options, and performance-based awards granted for retention and performance, (ii) a discretionary equity program for other management and key employees, and (iii) stock awards for non-employee directors. The Company’s Board of Directors and the Human Capital and Compensation Committee, as applicable, have discretionary authority to set the terms of the stock-based awards. Grants to employees during fiscal ~~2025~~2026 were issued under the Company’s Amended and Restated 2020 Incentive Compensation Plan. In fiscal 2026, 2025 and 2024, the Company granted performance-based stock awards and restricted stock awards. ~~In fiscal 2023, the Company granted performance cash awards, restricted stock awards, and stock options.~~ At present, the Company settles equity-based grants through newly issued shares of common stock. As of March 31, ~~2025~~2026, approximately 1.30 million shares authorized under the Amended and Restated 2020 Incentive Compensation Plan remain available for future grants. Employee participants have the opportunity to deliver back to the Company the number of shares from the vesting of stock awards sufficient to satisfy the individual’s minimum tax withholding obligations. These shares are held as treasury shares. The Company recorded stock-based compensation expense of $2622.41 million, $1026.84 million, and $610.68 million in fiscal ~~2025~~2026, ~~2024,~~2025 and ~~2023~~2024, respectively. During fiscal 2026 and 2025, in connection with restructuring actions, the Company modified certain stock-based awards for a limited number of employees to permit accelerated vesting, resulting in $2.1 million and $6.0 million, respectively, of incremental stock-based compensation expense.

Restricted stock

The Company recorded $85.07 million, $58.30 million, and $5.43 million of compensation expense related to restricted stock in fiscal ~~2025~~2026, ~~2024,~~2025 and ~~2023~~2024, respectively. The grant date fair value of restricted stock awards that vested during fiscal ~~2025~~2026, ~~2024,~~2025 and ~~2023~~2024 was $6.36 million, $4.6.3 million, and $4.76 million, respectively. At March 31, ~~2025~~2026, the Company had $68.01 million of unrecognized compensation expense related to non-vested restricted stock, which it expects to recognize over a weighted-average period of 1.57 years. The Company values restricted stock awards using the closing market price of its common shares on the date of grant. Based upon the terms of the annual awards, restricted stock awards vest 33 percent, 33 percent, and 34 percent per year for three years, respectively. Restricted stock awards granted to non-employee directors ~~in fiscal 2025~~ vest one year from the date of grant.

A summary of restricted stock activity for fiscal ~~2025~~2026 was as follows:


		Weighted-average
	Shares	price
Non-vested balance, beginning of year	0.53	$	2142.0890
Granted	0.1		~~111~~136.0297
Vested	(0.32)		1935.0275
Forfeited	—(0.1)		3560.7188
Non-vested balance, end of year	0.31	$	42107.9065

65Stock options

The Company recorded $0.1 million, $1.7 million, and $1.0 million of compensation expense related to stock options in fiscal 2026, 2025 and 2024, respectively. The grant date fair value of stock options that vested during fiscal 2026, 2025 and 2024, was $0.7 million, $1.0 million, and $1.2 million, respectively. As of March 31, 2026, the Company has no unvested stock option awards.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

Stock options expire no later than 10 years after the grant date and have an exercise price equal to the fair market value of Modine’s common stock on the date of grant. The Company did not grant options in fiscal 2026, 2025 or 2024.

~~The~~A ~~Company~~summary ~~recorded $1.7 million, $1.0 million, and $1.2 million~~ of ~~compensation expense related to~~ stock ~~options~~option inactivity ~~fiscal~~for ~~2025, 2024, and 2023, respectively. The grant date fair value of stock options that vested during~~ fiscal ~~2025,~~2026 ~~2024, and 2023,~~ was ~~$1.0~~as million, $1.2 million, and $1.0 million, respectively. As of March 31, 2025, the total compensation expense not yet recognized related to non-vested stock options was $0.1 million and the weighted-average period in which the remaining expense is expected to be recognized was 0.2 years.follows:

The Company estimated the fair value of option awards on the date of grant using the Black-Scholes option valuation model and the following assumptions:


							Weighted-average
				Weighted-average			remaining contractual		Aggregate
		Shares		exercise price			term (years)		intrinsic value
Outstanding, beginning of year		0.5		$	12.94
Exercised		(0.3)			12.56
Forfeited or expired		—			12.49
Outstanding, end of year		0.2		$	13.43		5.0		$	44.1

Exercisable, March 31, 2026		0.2		$	13.43		5.0		$	44.1


	Year ended March 31, 2023
Fair value of options	$	6.99
Expected life of awards in years		6.0
Risk-free interest rate		3.0	%
Expected volatility of the Company’s stock		57.8	%
Expected dividend yield on the Company’s stock		0.0	%

~~Stock~~The ~~options~~aggregate ~~expire~~intrinsic novalue ~~later~~represents ~~than~~the ~~10 years~~difference ~~after~~between the ~~grant~~closing ~~date~~price ~~and~~of ~~have~~Modine’s ancommon ~~exercise~~shares ~~price~~on ~~equal to~~ the ~~fair~~last ~~market~~trading ~~value~~day of ~~Modine’s~~fiscal ~~common~~2026 ~~stock~~over on the ~~date~~exercise price of ~~grant. The~~the ~~Company~~stock ~~did~~options, ~~not~~multiplied ~~grant~~by ~~options~~the innumber ~~fiscal~~of ~~2025~~options outstanding or ~~2024~~exercisable. ~~Based~~The ~~upon~~aggregate ~~the~~intrinsic ~~terms~~value ofis ~~the~~not ~~fiscal~~recorded ~~2023~~for ~~awards~~financial statement purposes, ~~stock~~and ~~options~~this ~~vest~~value ~~33 percent,~~will ~~33 percent,~~change ~~and~~based ~~34 percent~~upon ~~per year~~daily ~~for~~changes ~~three years,~~in ~~respectively~~the price of Modine’s common shares.

A summary of stock option activity for fiscal 2025 was as follows:


				Weighted-average
		Weighted-average		remaining contractual	Aggregate
	Shares	exercise price		term (years)	intrinsic value
Outstanding, beginning of year	0.6	$	12.78
Granted	—		—
Exercised	(0.1)		11.79
Forfeited or expired	—		12.85
Outstanding, end of year	0.5	$	12.94	5.9	$	31.8

Exercisable, March 31, 2025	0.4	$	12.80	5.7	$	25.5

The aggregate intrinsic value represents the difference between the closing price of Modine’s common shares on the last trading day of fiscal 2025 over the exercise price of the stock options, multiplied by the number of options outstanding or exercisable. The aggregate intrinsic value is not recorded for financial statement purposes, and this value will change based upon daily changes in the price of Modine’s common shares.

Additional information related to stock options exercised is as follows:


	Years ended March 31,
	~~2025~~2026		~~2024~~2025		~~2023~~2024
Intrinsic value of stock options exercised	$	837.14	$	128.41	$	112.54
Proceeds from stock options exercised		13.05		21.60		2.96

Restricted stock – performance-based stock awards

The Company granted performance-based stock awards in fiscal 2026, 2025 and 2024. For performance-based stock awards, the Company values the awards using the closing market price of its common shares on the date of grant. The Company recorded $16.3 million, $16.7 million, and $4.5 million of compensation expense related to performance-based stock awards in fiscal 2026, 2025 and 2024, respectively. At March 31, 2026, the Company had $20.4 million of unrecognized compensation expense related to non-vested performance-based stock awards, which it expects to recognize over a weighted-average period of 1.6 years.

Shares earned under the performance portion of the incentive program are based upon the attainment of certain financial targets over a three-year period and are issued after the end of that three-year performance period, if the performance targets have been achieved. The performance metrics for the performance-based awards granted in fiscal 2026, 2025 and 2024 are based upon both a target three-year average consolidated cash flow return on invested capital and a target three-year average growth in consolidated net earnings before interest, taxes, depreciation, amortization, and certain other adjustments (“Adjusted EBITDA”) at the end of the three-year performance period, commencing with the fiscal year of grant.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

Restricted stock – performance-based stock awards

The Company granted performance-based stock awards in fiscal 2025 and 2024. The Company granted performance-based cash awards in fiscal 2023 in lieu of performance-based stock awards. For performance-based stock awards, the Company values the awards using the closing market price of its common shares on the date of grant. The Company recorded $16.7 million and $4.5 million of compensation expense related to performance-based stock awards in fiscal 2025 and 2024, respectively. During fiscal 2023 all performance-based awards were cash-based, therefore, the Company did not recognize compensation expense related to performance-based stock awards. At March 31, 2025, the Company had $21.6 million of total unrecognized compensation expense related to non-vested performance-based stock awards, which is expected to be recognized over a weighted-average period of 1.7 years.

Shares earned under the performance portion of the incentive program are based upon the attainment of certain financial targets over a three-year period and are issued after the end of that three-year performance period, if the performance targets have been achieved. The performance metrics for the performance-based awards granted in fiscal 2025, 2024, and 2023 are based upon both a target three-year average consolidated cash flow return on invested capital and a target three-year average growth in consolidated net earnings before interest, taxes, depreciation, amortization, and certain other adjustments (“Adjusted EBITDA”) at the end of the three-year performance period, commencing with the fiscal year of grant.

Note 6: Restructuring Activities

Restructuring and repositioning expenses were as follows:


	Years ended March 31,
	~~2025~~2026		~~2024~~2025		~~2023~~2024
Employee severance and related benefits	$	2412.39	$	1224.93	$	312.59
Other restructuring and repositioning expenses		37.97		23.19		12.51
Total	$	2820.26	$	1528.02	$	515.0

During fiscal ~~2025~~2026, restructuring and repositioning expenses primarily consisted of severance expenses. The severance charges were primarily recorded in Europe and North America ~~within~~and ~~the~~include ~~Performance~~severance ~~Technologies~~related ~~segment~~to ~~and included~~ targeted headcount reductions intended to reduce SG&A and operational expenses. In addition, ~~the~~as ~~Company recorded severance expenses in the Climate Solutions segment, primarily related to the pending closure of a production facility in Italy. As~~ part of its transformational initiatives supported by 80/20 principles, the Company is taking steps to optimize ~~the~~its ~~efficiency~~supply ofchain ~~its~~and manufacturing footprint ~~and processes~~ in order to ~~improve~~support ~~profit~~its ~~margins~~expansion ~~across~~of ~~both~~manufacturing ofcapacity ~~its~~in ~~business~~the ~~segments~~U. ~~Other~~S. ~~restructuring~~for data center products and ~~repositioning~~to ~~expenses~~improve ~~include~~profit ~~costs~~margins. These torepositioning ~~transfer~~activities ~~production~~have ~~and~~included ~~warehousing~~transferring the production for certain product lines among its facilities.

During fiscal 2025, restructuring and repositioning expenses primarily consisted of severance expenses in Europe and North America within the Performance Technologies segment and included targeted headcount reductions intended to reduce SG&A and operational expenses. In addition, the Company recorded severance expenses in the Climate Solutions segment, primarily related to the closure of a production facility in Italy. Other restructuring and repositioning expenses include costs to transfer production and warehousing for certain product lines among its facilities, related to the Company’s transformational initiatives.

During fiscal 2024, restructuring and repositioning expenses primarily consisted of severance expenses in the Performance Technologies segment related to the closure of its European technical service center. In addition, the Company incurred equipment transfer costs within the Climate Solutions and Performance Technology segments related to its transformational initiatives.

~~During~~The ~~fiscal~~Company ~~2023,~~accrues ~~restructuring and repositioning expenses primarily consisted of~~ severance ~~expenses for targeted headcount reductions~~ in ~~both~~accordance ~~the~~with ~~Climate~~its ~~Solutions~~written ~~and~~plans, ~~Performance Technologies segments. In addition~~procedures, ~~the Performance Technologies~~ and ~~Climate~~relevant ~~Solutions~~statutory ~~segments~~requirements. ~~incurred~~Changes ~~equipment transfer costs~~ in ~~Europe~~accrued ~~and~~severance ~~closure~~were ~~costs~~as ~~related to a previously-leased facility in the U.S., respectively.~~follows:


		Years ended March 31,
		2026			2025
Beginning balance		$	6.6		$	13.0
Additions (a)			10.8			18.3
Payments			(14.0)			(24.6)
Effect of exchange rate changes			0.2			(0.1)
Ending balance		$	3.6		$	6.6
____

(a)	The fiscal 2026 and 2025 amounts exclude $2.1 million and $6.0 million, respectively, of non-cash severance-expense resulting from the accelerated vesting of certain stock-based compensation awards in connection with restructuring actions.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

The Company accrues severance in accordance with its written plans, procedures, and relevant statutory requirements. Changes in accrued severance were as follows:


	Years ended March 31,
	2025		2024
Beginning balance	$	13.0	$	10.6
Additions (a)		18.3		12.9
Payments		(24.6)		(7.8)
Disposition (b)		—		(2.5)
Effect of exchange rate changes		(0.1)		(0.2)
Ending balance	$	6.6	$	13.0
____

(a) The fiscal 2025 amount excludes $6.0 million of non-cash severance-related costs resulting from the accelerated vesting of certain stock-based compensation awards in connection with restructuring actions.

(b) The Company sold three automotive businesses based in Germany during fiscal 2024. See Note 2 for additional information regarding the sale.

In May 2025, the Company approved additional headcount reductions in the Performance Technologies segment and, as a result, expects to record approximately $4.0 million of severance expenses during the first quarter of fiscal 2026.

Note 7: Other Income and Expense

Other income and expense consisted of the following:


	Years ended March 31,
	~~2025~~2026		~~2024~~2025		~~2023~~2024
Interest income	$	2.70	$	42.37	$	14.3
Foreign currency transactions (a)		(16.27)		(31.02)		(3.70)
Net periodic benefit cost (b)		(43.65)		(34.36)		(23.03)
Total other expense – net	$	(38.12)	$	(23.01)	$	(42.40)
____

(a) Foreign currency transactions primarily consist of foreign currency transaction gains and losses on the re-measurement or settlement of foreign currency-denominated assets and liabilities, including intercompany loans and transactions denominated in a foreign currency ~~and intercompany loans~~, along with gains and losses on certain foreign currency exchange contracts.

(b) Net periodic benefit cost for the Company’s pension and postretirement plans is exclusive of service cost and the $116.1 million pension termination charge recorded in fiscal 2026. See Note 18 for additional information.

Note 8: Income Taxes

The U.S. and foreign components of earnings before income taxes and the provision for income taxes consisted of the following:


		Years ended March 31,
		2026			2025			2024
Components of earnings (loss) before income taxes:
United States		$	(51.3)		$	41.7		$	37.2
Foreign			237.8			212.3			177.4
Total earnings before income taxes		$	186.5		$	254.0		$	214.6


		Years ended March 31,
		2026			2025			2024
Income tax provision (benefit):
Current:
U.S. Federal		$	39.1		$	4.7		$	1.6
State			7.6			4.5			2.4
Foreign			55.6			52.8			41.0
Total current provision			102.3			62.0			45.0

Deferred:
U.S. Federal			(34.6)			5.8			7.1
State			(5.2)			(2.2)			(0.9)
Foreign			0.7			2.9			—
Total deferred (benefit) provision			(39.1)			6.5			6.2

Total provision for income taxes		$	63.2		$	68.5		$	51.2

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

~~Note 8: Income~~The ~~Taxes~~reconciliation between the U.S. federal statutory income tax rate and the Company’s effective tax rate was as follows:

The U.S. and foreign components of earnings before income taxes and the provision or benefit for income taxes consisted of the following:


		Years ended March 31,
		2026					2025					2024
		Amount		Rate			Amount		Rate			Amount		Rate
U.S. federal statutory income tax rate		$	39.2	21.0	%		$	53.3	21.0	%		$	45.1	21.0	%
U.S. tax effects:
State taxes, net of federal benefit (a)			1.9	1.0				1.0	0.4				1.4	0.7
Effect of cross-border tax laws (b):
Foreign-derived intangible income			(3.6)	(1.9)				(2.7)	(1.1)				—	—
U.S. tax effects on foreign branch income			—	—				—	—				(6.0)	(2.8)
Disposition of businesses (c)			—	—				—	—				(1.8)	(0.8)
Other			(0.4)	(0.2)				0.1	—				(0.8)	(0.4)
Nontaxable or nondeductible:									—
Nondeductible compensation			8.0	4.3				7.4	2.9				4.7	2.2
Stock-based compensation awards			(6.6)	(3.5)				(5.1)	(2.0)				(4.1)	(1.9)
Other			1.3	0.7				0.2	0.1				0.4	0.2
Tax credits			(1.4)	(0.7)				(2.3)	(0.9)				(2.1)	(1.0)
Changes in valuation allowances			1.0	0.5				0.2	0.1				8.3	3.9
Other:
Pension termination (d)			13.7	7.3				—	—				—	—
Other			(0.1)	—				(0.7)	(0.2)				0.4	0.1
Foreign tax effects:
Germany:
Changes in valuation allowances			2.4	1.3				4.1	1.6				2.9	1.4
Other			1.5	0.8				(0.5)	(0.2)				(1.0)	(0.5)
Hungary:
Changes in valuation allowances			(2.0)	(1.1)				—	—				—	—
Expiration of attribute carryforward			2.0	1.1				—	—				—	—
Other			(1.1)	(0.6)				—	—				—	—
India:
Withholding tax			2.1	1.1				—	—				—	—
Other			0.9	0.5				—	—				—	—
Mexico			—	—				3.0	1.2				—	—
Brazil			—	—				2.9	1.1				—	—
Italy			—	—				2.8	1.1				—	—
Other foreign jurisdictions			4.0	2.1				4.3	1.7				4.3	2.0
Changes in unrecognized tax benefits			0.4	0.2				0.5	0.2				(0.5)	(0.2)
Effective tax rate		$	63.2	33.9	%		$	68.5	27.0	%		$	51.2	23.9	%
____

(a)	State taxes in California and Mississippi make up the majority of the tax effect in this category.

(b)	Includes the impact of tax credits.

(c)	Represents the benefit to U.S. federal taxes resulting from the sale of three businesses in Germany during fiscal 2024. In total, the Company recorded a $3.1 million tax benefit during fiscal 2024 related to the sale.

(d)

Represents the detriment to U.S. federal taxes related to the Company’s termination of its primary U.S. pension plan that resulted from disproportionate income tax effects in accumulated other comprehensive loss. In total, the income tax benefit related to the fiscal 2026 pension termination charge was $13.1 million.


	Years ended March 31,
	2025		2024		2023
Components of earnings before income taxes:
United States	$	41.7	$	37.2	$	12.5
Foreign		212.3		177.4		112.8
Total earnings before income taxes	$	254.0	$	214.6	$	125.3


Income tax provision (benefit):
Federal:
Current	$	4.7	$	1.6	$	1.5
Deferred		5.8		7.1		(47.5)
State:
Current		4.5		2.4		2.3
Deferred		(2.2)		(0.9)		(11.4)
Foreign:
Current		52.8		41.0		27.5
Deferred		2.9		—		(0.7)
Total income tax provision (benefit)	$	68.5	$	51.2	$	(28.3)

The reconciliation between the U.S. federal statutory rate and the Company’s effective tax rate was as follows:


	Years ended March 31,
	2025		2024		2023
Statutory federal tax	21.0	%	21.0	%	21.0	%
State taxes, net of federal benefit	0.9		0.5		(0.1)
Taxes on non-U.S. earnings and losses	2.4		3.7		5.8
Valuation allowances	0.4		2.5		(42.9)
Tax credits and benefits	(1.7)		(2.1)		(3.7)
Foreign-derived intangible income	(1.1)		(0.5)		(0.8)
Compensation	0.9		0.3		0.7
Tax rate or law changes	(0.1)		—		(0.2)
Uncertain tax positions, net of settlements	0.2		(0.2)		0.4
Notional interest deductions	—		(1.2)		(1.7)
Dividends and taxable foreign inclusions	3.7		0.4		0.9
Other	0.4		(0.5)		(2.0)
Effective tax rate	27.0	%	23.9	%	(22.6)	%

The Company’s effective tax rate in fiscal 2025 was higher than the prior year, primarily due to the absence of a $3.1 million tax benefit recorded in fiscal 2024 related to the sale of three automotive businesses based in Germany and an unfavorable impact of foreign currency exchange rates, partially offset by changes in the mix and amount of foreign and U.S. earnings. The $3.1 million tax benefit in fiscal 2024 is presented within the dividends and taxable foreign inclusions line in the table above; see Note 2 for information regarding the sale of the three automotive businesses. The Company’s fiscal 2023 effective tax rate was favorably impacted by an income tax benefit related to the reversal of a valuation allowance on deferred tax assets in the U.S, as described below.

Table of Contents

MODINE MANUFACTURING COMPANY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In millions, except per share amounts)

~~The~~As ~~Company~~of ~~records~~March ~~valuation~~31, ~~allowances~~2026 ~~against~~and ~~its~~2025, ~~net~~income ~~deferred~~ tax ~~assets~~liabilities toincluded ~~the~~within ~~extent~~other itcurrent ~~determines~~liabilities iton ~~is more likely than not that such assets will not be realized in~~ the ~~future. Each quarter, the~~ Company’s ~~evaluates~~consolidated ~~the~~

Filing Compare · MODINE MANUFACTURING CO