UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

☑ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended June 30, ~~2024~~2025

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ______________ to _______________

Commission File Number 001-34426

Astrotech Corporation

(Exact name of registrant as specified in its charter)

Delaware		91-1273737
(State or other jurisdiction of		(I.R.S. Employer
corporation or organization)		Identification No.)

2105 Donley Drive, 100, Austin, Texas		78758
(Address of principal executive offices)		(Zip Code)

Registrant’s telephone number, including area code: (512) 485-9530

Securities Registered pursuant to Section 12(b) of the Act:

Title of each class	Trading Symbol(s)	Name of each exchange
Common Stock	ASTC	on which registered
$0.001 per share		The Nasdaq Capital Market

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☑

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ☐ No ☑

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☑ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☑ No ☐

Table of Contents

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large, accelerated filer ☐ Accelerated filer ☐ Non-accelerated filer ☑ Smaller reporting company ☑ Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to § 240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☑

The aggregate market value of the registrants voting and non-voting common equity held by non-affiliates of the registrant as of December 31, ~~2023~~2024, based upon the closing price of such stock on The Nasdaq Capital Market on such date of $86.4972, was approximately $1210,~~921~~083,~~822~~870. This calculation excludes shares held by the registrant’s current directors and executive officers and stockholders that the registrant has concluded are affiliates of the registrant.

As of September 1724, ~~2024~~2025, 1,~~701~~758,~~729~~953 shares of the registrant’s common stock, par value $0.001 per share, were issued and outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

The registrant’s definitive proxy statement to be used in connection with its ~~2024~~2025 Annual Meeting of Stockholders (the “Proxy Statement”) is incorporated by reference in Part III of this Form 10-K to the extent stated herein. The Proxy Statement will be filed with the SEC within 120 days after June 30, ~~2024~~2025. Except with respect to information specifically incorporated by reference in this Form 10-K, the Proxy Statement is not deemed to be filed as a part hereof.

3 2

Table of Contents

Table of Contents

PART I 76 Item 1. Business 76 Item 1A. Risk Factors 256 Item 1B. Unresolved Staff Comments 4449 Item 1C. Cybersecurity 4449 Item 2. Properties 4550 Item 3. Legal Proceedings 4551 Item 4. Mine Safety Disclosures 4651 PART II 4651 Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities 4651 Item 6. Reserved 4651 Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations 4651 Item 7A. Quantitative and Qualitative Disclosures About Market Risk 5459 Item 8. Financial Statements and Supplementary Data 5560 Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure 8186 Item 9A. Controls and Procedures 8186 Item 9B. Other Information 8287 PART III 8287 Item 10. Directors, Executive Officers and Corporate Governance 8287 Item 11. Executive Compensation 8287 Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters 8287 Item 13. Certain Relationships and Related Transactions, and Director Independence 8287 Item 14. Principal Accounting Fees and Services 8287 PART IV 8388 Item 15. Exhibits, Financial Statement Schedules 8388 Item 16. Form 10-K Summary 8691 SIGNATURES 8792

4 3

Table of Contents

FORWARD-LOOKING STATEMENTS

This Form 10-K contains “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934 (the “Exchange Act”). All statements other than statements of historical fact are “forward-looking statements” for purposes of federal and state securities laws. Forward-looking statements may include the words “may,” “will,” “plans,” “believes,” “estimates,” “expects,” “intends” and other similar expressions. Such statements are subject to risks and uncertainties that could cause our actual results to differ materially from those projected in the statements. Such risks and uncertainties include, but are not limited to:

● The adverse ~~impact~~expectations ofregarding ~~recent~~the ~~inflationary~~global ~~pressures~~economy, ~~including~~inflation, ~~significant~~the ~~increases~~potential infor ~~fuel~~recession ~~costs,~~and ~~global~~geopolitical ~~economic~~tensions ~~conditions~~ and ~~events~~any ~~related~~resulting ~~to these conditions~~sanctions, ~~including~~or ~~the ongoing war in Ukraine and the COVID-19 pandemic~~wars;

● Our ability to successfully pursue our business plan and execute our strategy, including our collaboration with Cleveland Clinic;

●

The effect of economic and political conditions in the United States or other nations that could impact our ability to sell our products and services or gain customers;

●

Product demand and market acceptance risks, including our ability to develop and sell products and services to be used by governmental or commercial customers;

●

The impact of trade barriers imposed by the U.S. government, such as import/export duties and restrictions, tariffs and quotas, and potential corresponding actions by other countries in which we conduct our business;

●

Technological difficulties and potential legal claims arising from any technological difficulties;

●

The risks related to the availability of, and cost inflation in, supply chain inputs, including labor, raw materials, commodities, packaging, and transportation;

●

Uncertainty in government funding and support for key programs, grant opportunities, or procurements;

●

The impact of competition on our ability to win new contracts;

●

Our ability to meet technological development milestones and overcome development challenges; and

●

Our ability to successfully identify, complete, and integrate acquisitions.

While we do not intend to directly harvest, manufacture, distribute or sell cannabis or cannabis products, we may be detrimentally affected by a change in enforcement by federal or state governments and we may be subject to additional risks in connection with the evolving regulatory area and associated uncertainties. Any such effects may give rise to risks and uncertainties that are currently unknown or amplify others identified herein.

These forward-looking statements are based on management’s current expectations. These statements are neither promises nor guarantees, but involve known and unknown risks, uncertainties, and other important factors that may cause our actual results, performance, or achievements to be materially different from any future results, performance, or achievements expressed or implied by the forward-looking statements. Factors that may cause actual results to differ materially from current expectations include, among other things, those listed under Part I, Item 1A. “Risk Factors,” Part II, Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and elsewhere in this Annual Report on Form 10-K. Given these uncertainties, you should not rely on these forward-looking statements as predictions of future events.

Although we believe that the assumptions underlying our forward-looking statements are reasonable, any of the assumptions could be inaccurate. Therefore, we cannot assure you that the forward-looking statements included in this Form 10-K will prove to be accurate. In light of the significant uncertainties inherent in our forward-looking statements, the inclusion of such information should not be regarded as a representation by us or any other person that our objectives and plans will be achieved. Some of these and other risks and uncertainties that could cause actual results to differ materially from such forward-looking statements are more fully described elsewhere in this Form 10-K, or in the documents incorporated by reference herein. Except as may be required by applicable law, we undertake no obligation to publicly update or advise of any change in any forward-looking statement, whether as a result of new information, future events, or otherwise. In making these statements, we disclaim any obligation to address or update each factor in future filings with the Securities and Exchange Commission (“SEC”) or communications regarding our business or results, and we do not undertake to address how any of these factors may have caused changes to discussions or information contained in previous filings or communications. In addition, any of the matters discussed above may have affected our past results and may affect future results, so that our actual results may differ materially from those expressed in this Form 10-K and in prior or subsequent communications.

Table of Contents

PART I

Item 1. Business

Our Company

The terms “Astrotech”, “the Company”, “we”, “us”, or “our” refer to Astrotech Corporation (Nasdaq: ASTC), a Delaware corporation organized in 1984. Our use of “products” and “devices” refer to the TRACER 1000™, BreathTest-1000™, AGLAB 1000™, and Pro-Control 1000™ along with related accessories and consumables.

We are commercializing the Astrotech Mass Spectrometer Technology™ platform (“AMS Technology”) through application specific, wholly owned subsidiaries.

Our mission isencompasses tothe ~~expand~~advancement ~~access~~of toboth mass spectrometry ~~(“MS”)~~ and ~~its~~gas ~~use~~chromatography, ~~through~~two ~~the~~powerful ~~deployment~~analytical oftechniques ~~devices~~that ~~designed~~together ~~specifically~~enable ~~for~~precise ~~the~~detection ~~appropriate~~and ~~levels~~identification of ~~precision~~chemical ~~required~~compounds inacross a wide range of high-~~volume,~~demand environments.  We aim to expand access to mass spectrometry by simplifying the complexity of operating these devices within real-time testing environments such as airports, border checkpoints, cargo hubs, infrastructure security, correctional facilities, military bases, law enforcement centers, and industrial locations. We are introducing our new line of products that are ultra-portable, on-site, rugged environmental testing instruments, featuring our proprietary ATi Mass Spectrometer Technology ("MS") and ATi Gas Chromatography Column ("GC") to achieve our mission through simplifying the user interface, ruggedizing the critical components to endure MS/GC field work, and enabling multiple configurations for sample intake options. The Astrotech Mass Spectrometer Technology™ and ATi Gas Chromatograph Column (GC) platforms achieve our mission through simplifying the user interface, automating the complicated calibration process, ruggedizing the critical components to endure MS/GC field work, and enabling multiple configurations for sample intake options. 

Since the ~~Tracer~~TRACER 1000 was certified by the European Civil Aviation Conference (“ECAC”) in 2019, our customers have deployed our devices in approximately 30 34 locations ~~across 14~~ 16 countries throughout United States of America, Europe, and Asia.

Our Business Units

Our efforts are focused on commercializing our platform mass spectrometry technology through our wholly-owned subsidiaries:

●

Astrotech Technologies, Inc. (“ATI”) owns and licenses the intellectual property related to the AMS Technology.

● 1st Detect Corporation (“1st Detect”) is a manufacturer of ~~explosives~~explosive trace detectors ("ETDs") and ~~narcotics~~narcotic trace detectors (“NTDs”) developed for use in security and detection at airports, border checkpoints, cargo hubs, infrastructure security, correctional facilities, military bases, and law enforcement centers. 1st Detect holds an exclusive AMS Technology license from ATI for air passenger and cargo security applications.

●

AgLAB, Inc. (“AgLAB”) is developing a series of mass spectrometers for use in the hemp and cannabis market with initial focus on optimizing yields in the distillation processes. AgLAB holds an exclusive AMS Technology license from ATI for applications in the agriculture industry which require analyzing complex chemical compounds found in organic plant material and extracts.

●

BreathTech Corporation (“BreathTech”) is developing a breath analysis tool to screen for volatile organic compound (“VOC”) metabolites found in a person’s breath that could indicate a compromised condition including but not limited to a bacterial or viral infection. BreathTech holds an exclusive AMS Technology license from ATI for breath analysis applications.

● Pro-Control, Inc. (“"Pro-Control”") is focused on applying the AMS Technology in industrial process control applications. The mass spectrometer and process are designed to test, measure and increase reaction intermediates, purity and percent yields in industrial processes. Pro-Control holds an exclusive AMS Technology license from ATI for the distillation of chemicals outside of the agriculture industry.

7 ● EN-SCAN, Inc. (“EN-SCAN”) is developing advanced environmental testing and monitoring solutions, integrating gas chromatography and mass spectrometry technology in rugged, portable designs. EN-SCAN’s products are expected to support industrial, environmental, and regulatory applications, helping organizations meet compliance requirements and environmental safety. EN-SCAN will use proprietary ATi Gas Chromatograph Column ("GC") and ATi Mass Spectrometer Technology ("MS") for instant feedback to accurately detect soil, water, and air contamination source location and migration.

Table of Contents

Astrotech Technologies, Inc.

ATI owns and licenses the AMS Technology, the platform MS technology originally developed by 1st Detect. The AMS Technology has been designed to be inexpensive, smaller, and easier to use when compared to traditional mass spectrometers. Unlike other technologies, the AMS Technology works under ultra-high vacuum, which eliminates competing molecules, yielding higher resolution and fewer false alarms. The intellectual property includes 1716 patents granted along with extensive trade secrets. With a number of diverse market opportunities for the core technology, ATI is structured to license the intellectual property for different fields of use. ATI currently licenses the AMS Technology to four wholly-owned subsidiaries of Astrotech on an exclusive basis, including to 1st Detect for use in security and detection applications, to AgLAB for use in the agriculture application, to BreathTech for use in breath analysis applications, ~~and to~~ Pro-Control for use in production applications, and EN-SCAN for use in industrial and environmental applications.

1^st Detect Corporation

1st Detect, a licensee of ATI for security and detection applications, has developed the TRACER 1000™, the world’s first MS based ETD certified by the ECAC and approved by ~~TSA~~the U.S. Transportation Security Administration ("TSA") for air cargo. The TRACER 1000 was designed to outperform the ETDs currently used at airports, cargo and other secured facilities, and borders worldwide. ~~The~~We ~~Company~~believe ~~believes~~ that ETD customers are unsatisfied with the currently deployed ETD technology, which is driven by ion mobility spectrometry (“IMS”). ~~The~~We ~~Company~~ further ~~believes~~ believe that some IMS-based ETDs have issues with false positives, as they often misidentify personal care products and other common household chemicals as explosives, causing facility shutdowns, unnecessary delays, frustration, and significant wasted security resources. In addition, there are hundreds of different types of explosives, but IMS-based ETDs have a very limited threat detection library reserved only for those few explosives of largest concern. Adding additional compounds to the detection library of an IMS-based ETD fundamentally reduces the instrument’s performance, further increasing the likelihood of false alarms. In contrast, adding additional compounds to the TRACER 1000’s detection library does not degrade its detection capabilities, as it has a virtually unlimited and easily expandable threat library.

InWe ~~order~~obtained ECAC certification in 2019 which allows us to sell the TRACER 1000 to airport and cargo security customers in the European Union and certain other countries,. weWe ~~obtained~~currently sell the TRACER 1000 to customers who accept ECAC certification. We ~~The~~are ~~Company is~~ currently selling the TRACER 1000 to customers who accept ECAC certification. As of June 30, ~~2024~~2025, ~~the~~ ~~Company~~we ~~has~~have deployed the TRACER 1000 in approximately 3034 locations in 1416 countries throughout United States of America, Europe and Asia.

OnIn June ~~20,~~ 2024, ~~after a long-term engagement with~~ the TSA ~~beginning in 2018, we announced the U.S. Transportation Security Administration (“TSA”)~~ approved ~~the~~1st Detect's TRACER 1000 for the Air Cargo Security Technology List, ~~(“ACSTL”). This~~which ~~action~~advanced ~~advances~~ the TRACER 1000 to Stage II testing, and ~~allows~~permits usair tocargo ~~sell~~companies in the ~~TRACER 1000~~United States to ~~air~~use ~~cargo~~our ~~companies~~equipment in ~~the~~their ~~United States~~operations. During In Stage II testing, ~~the~~we ~~Company~~are ~~will~~conducting ~~begin~~ field trials with the TSA. If field trials are successful, the TRACER 1000 will be added to the "qualified" list.

~~The~~We ~~Company~~have ~~has~~ also ~~started~~commenced the process to pass TSA checkpoint testing. This process involves Developmental Test and Evaluation in which the Transportation Security Laboratory ("TSL") will test the TRACER 1000 and work with 1st Detect to ensure its readiness to enter certification testing. The certification test is then completed by the Independent Test & Evaluation department of TSL. As For of the fiscal year 2023, ~~budget~~ the United States federal government had a budget of over 6,000 ETD units at checkpoint and baggage screening points for which we believe that the TSA would benefit from utilizing our AMS Technology.

InWe are ~~May~~currently ~~2023,~~accepting weorders ~~successfully~~for ~~delivered~~the aTRACER ~~purchase~~1000 ~~order~~ETD ~~for~~and 14NTD ~~ETDs~~which ~~from~~are alisted ~~Romania~~in the United States General Services Administration ("GSA") IT Schedule 70 under Contract No. GS-~~based~~35F-250GA ~~company~~with ~~focused~~SRI onGroup ~~research~~LLC, ~~and~~Special ~~innovation~~Item Number 334290 in ~~the~~April, ~~security~~2024. The TRACER 1000 ETD and ~~telecommunications~~NTD ~~space. During~~are ~~the~~high-performance ~~second~~laboratory ~~fiscal~~instruments ~~quarter~~capable of ~~2024,~~rapid wedetection ~~delivered~~of atrace ~~purchase~~levels ~~order~~of ~~for~~explosive ~~seven~~and ofnarcotic ~~our~~compounds in seconds. The TRACER 1000 ~~explosives~~ ~~trace~~ETD ~~detectors~~and ~~for~~NTD anboth ~~airport~~provide a ruggedized platform that can be applied across various markets including airports, border security , checkpoint, ~~which were~~cargo ~~deployed~~and ininfrastructure ansecurity, ~~airport~~correctional facilities, military, and law enforcement. IT Schedule 70 is a long-term contract issued by the GSA to commercial technology vendors that allows sales to the United States federal government, one of the largest buyers of goods and services in ~~Romania~~the world.

WeOn ~~are~~January ~~currently~~14, ~~accepting~~2025, ~~orders~~our ~~for~~wholly ~~the~~owned ~~TRACER~~subsidiary, ~~1000~~1st ~~ETD and~~Detect ~~NTD which~~Corporation, ~~are listed~~announced inthat ~~the~~it ~~U.S.~~has ~~General~~been ~~Services~~awarded ~~Administration~~research ~~("GSA")~~and ITdevelopment ~~Schedule~~contract 7070RSAT24CB0000015 ~~under Contract No. GS-35F-250GA~~ with ~~SRI~~the ~~Group~~United ~~LLC,~~States ~~Special~~Department ~~Item Number 334290 in April 2024. The TRACER 1000 ETD and NTD are high-performance laboratory instruments capable~~ of ~~rapid~~Homeland ~~detection~~Security of("DHS") ~~trace~~to ~~levels~~research, ofdevelop ~~explosive~~ and ~~narcotic~~mature ~~compounds~~the ~~in seconds. The~~ TRACER 1000 ~~ETD~~for ~~and~~DHS ~~NTD~~next ~~both~~generation ~~provide a~~explosives ~~ruggedized~~trace ~~platform that can be applied across various markets including airports, border security, checkpoint, cargo, and infrastructure security, correctional facilities, military, and law enforcement~~detection.

IT Schedule 70 is a long-term contract issued by the GSA to commercial technology vendors that allows sales to the U.S. federal government, one of the largest buyers of goods and services in the world. 7

On March 10, 2025, we announced the launch of the enhanced TRACER 1000 Narcotic Trace Detector ("TRACER 1000 NTD"). This innovative mobilized mass spectrometer is specifically configured to screen for the full range of synthetic opiates and novel psychoactive substances ("NPS") delivering accuracy and speed to counter the global drug crisis.

In April 2025, Astrotech received a $429,000 purchase order for TRACER 1000™ explosive trace detectors ("ETDs") from Intuitive Research and Technology, a TSA approved contractor. In April 2025, we fulfilled the purchase order and sold six TRACER 1000 explosive detectors to Intuitive Research and Technology Corporation. This is the first TSA-approved sale of our TRACER 1000 ETD, which utilizes mass spectrometry technology, known for its accuracy and low false alarm rate.

On June 12, 2025, we sold the first sale and deployment of the TRACER 1000 Narcotic Trace Detector in Vietnam, by way of its subsidiary 1st Detect. This milestone marked a significant step in expanding the 1st Detect footprint across Southeast Asia and reinforces its commitment to enhancing narcotics trace detection inspection capabilities.

We continue to showcase the TRACER 1000 NTD and ETD at the trade events in the U.S.

Table of Contents

AgLAB Inc.

AgLAB, an exclusive licensee of ATI for the use in the agriculture industry to analyze complex chemical compounds found in organic plant material and extracts, has developed the AgLAB 1000™ series of mass spectrometers for use in the hemp and cannabis markets with the initial focus on optimizing yields in the distillation process. The AgLAB product line is a derivative of ~~the~~our ~~Company’s~~ core AMS Technology. AgLAB continues to conduct field trials demonstrating that the AgLAB 1000-D2™ can be used in the distillation process to significantly improve the yields of tetrahydrocannabinol (“THC”) and cannabidiol (“CBD”) oil during distillation. The AgLAB 1000-D2™ uses the Maximum Value Process solution (“MVP”) to analyze samples in real-time and assist the equipment operator determining the ideal settings required to maximize yields.

Production and processing of hemp and cannabis is a huge, worldwide industry. In the U.S., for example, the wholesale value of the cannabis crop from just the U.S. states permitting adult-use and medical cannabis exceeds $6 billion annually. We believe growth in the U.S. and in the worldwide market is likely fed in part by the growing acceptance of medicinal cannabis products and anticipated legislative changes in various jurisdictions worldwide. We also believe this growth is due in part to the passage of the 2018 Farm Bill, which legalized hemp production in the U.S.

As the CBD and hemp market continues to grow, there has been an influx of new companies entering the CBD and THC supply chains, ranging from large corporations to small startups. These companies comprise AgLAB’s target market. The competition within the supply chain is fierce, with companies investing heavily in research and development to create innovative products and differentiate themselves from their competitors. However, the market remains highly fragmented, with many products of varying quality and efficacy, making it challenging for consumers to navigate. Overall, the CBD and hemp market in the U.S. is a rapidly growing industry with significant potential for continued expansion. As more research is conducted and regulations are established, we believe it is likely that the market will become more standardized and regulated, leading to increased consumer confidence and demand. Stakeholders in the industry are likely to face challenges as it matures, including increased competition and potential regulatory hurdles.

Management believes the AgLAB 1000-D2™ will deliver a compelling combination of cost and time savings while enhancing product quality and quantity for distillation processors of hemp and cannabis. The use of the AgLAB 1000-D2™ should reduce waste from current distillation practices and result in a significantly improved product. Due in large part to our ~~the Company’s~~ proprietary technology, ~~the~~we ~~Company~~believe ~~believes~~ it is the only provider of a mass spectrometry system that gives it a distinct advantage in the industry. Sales efforts for the AgLAB 1000-D2 are currently underway.

AgLAB announced the presentation of the AgLAB Maximum Value Processing at MJBizCon. The AgLAB MVP is an innovative process control system proven to increase the potency of ending-weight yields and increase revenue. The AgLAB MVP process provides real-time data, allowing distillers to adjust parameters to optimize the quality and quantity of each batch of oil. During our field trials of the AgLAB MVP, we were able to improve ending-weights yields by 20% or more. We believe these ongoing field trials demonstrate the solution can be a valuable tool for cannabis and hemp oil processors worldwide.

On June 13, 2024, AgLAB and SC Laboratories (“"SC Labs”") entered into a master lease agreement providing for the joint marketing of the AgLAB 1000-D2™ mass spectrometer and the AgLAB Maximum Value Process™ testing method to SC Labs’' clients.

9 8

Table of Contents

BreathTech Corporation

BreathTech, an exclusive licensee of ATI for use in breath analysis applications, ishas ~~developing~~ developed the BreathTest-1000™, a breath analysis tool to screen for VOC metabolites found in a person’s breath that could indicate they may have compromised condition ~~including but not limited to a bacterial or viral infection~~. ~~The~~We ~~Company believes~~ believe that new tools to quickly identify the presence of a VOC metabolite could play an important role in detecting and containing airborne diseases.

In ~~June~~conjunction ~~2022,~~with the ~~Company expanded~~CCF ~~its~~JDA, ~~existing~~BreathTech ~~study~~entered ~~that~~into ~~initially~~an ~~focused~~Investigator-Initiated onStudy ~~COVID-19~~Agreement ("CCF IISA") with The Cleveland Clinic toFoundation ~~use~~(“Cleveland ~~the~~Clinic”), ~~BreathTest-1000~~effective toMarch ~~screen~~31, ~~for~~2021, ato ~~variety~~expand ~~of diseases spanning~~ the ~~entire~~application ~~body. The~~of ~~project~~breath ~~focused~~analysis onby ~~detecting~~collecting ~~bloodstream infections~~ and ~~respiratory~~studying ~~infections. While~~ the ~~Joint~~gaseous ~~Development~~portion ~~Agreement~~of ~~with~~exhaled ~~Cleveland~~breath ~~Clinic~~for ~~remains~~markers ~~active,~~of welung ~~believe~~and ~~the~~systemic ~~work~~diseases. toThe ~~commercialize~~pilot ~~this~~study ~~application~~concluded ofand the ~~AMS~~CCF ~~Technology~~IISA ~~will~~terminated ~~require~~in ~~many~~accordance ~~years~~with ~~and~~its ~~significant~~terms ~~investment~~on ~~due~~February to7, ~~regulatory~~2025. We ~~requirements~~currently ~~and~~ have ~~determined~~no toactive ~~deploy~~or ~~capital~~anticipated ~~instead~~studies towith ~~our~~Cleveland ~~other~~Clinic ~~business~~under ~~units~~the CCF JDA. In Weaddition, ~~are~~we ~~also~~have ~~exploring~~satisfied ~~how~~all payment obligations under the ~~advancements~~CCF ~~and~~JDA. We ~~knowledge~~believe ~~derived~~additional ~~from~~studies ~~our~~would ~~research~~be onrequired ~~the~~to ~~BreathTech~~continue ~~use~~exploration ~~case~~of ~~can~~technologies bewhich ~~applied~~may inprovide ~~our~~non-invasive ~~other~~methods ~~existing~~of monitoring and ~~potential~~studying ~~new~~lung ~~business~~and ~~units~~systematic diseases.

We believe commercialization of this application with the AMS Technology would require many years and significant investment due to regulatory requirements. As such, we have determined to deploy capital instead to our other subsidiaries. We are also exploring how the advancements and knowledge derived from our research on the BreathTech use case can be applied in our other existing and potential new business units.

Pro-Control, Inc.

On December 12, 2023, we announced the formation of our new wholly-owned subsidiary, Pro-Control, and ATI’s entry into an exclusive license with Pro-Control to utilize our AMS Technology for industrial process control applications involving chemical distillation outside of the agriculture industry. Pro-Control uses advanced mass spectrometer instrumentation to monitor and control the production and operations of manufacturing processes using real-time, in-process samples. Pro-Control provides the vital spectral qualitative and quantitative data needed to control the production parameters (temperatures, flow, speed, and pressure) while significantly improving efficiency.

Pro-Control has introduced its proprietary Pro-Control Maximum Value Processing and the Pro-Control 1000-D2™ mass spectrometer, which in combination are designed to test, measure and increase reaction intermediates, purity and percent yields in industrial processes.

EN-SCAN, Inc.

On February 28, 2025, we announced the formation of our new wholly owned subsidiary, EN-SCAN, to manufacture and sell a new line of instruments built for environmental testing using its proprietary ATi GC and AMS Technology for outdoor field work for on-site, real-time air, water, and soil analysis providing instant feedback for accurate contamination source location and migration. With a focus on real-time monitoring, EN-SCAN is expected to enable organizations to make data-driven decisions while reducing testing costs and time delays. The EN-SCAN lineup includes EN-SCAN Handheld GC, EN-SCAN Fenceline Monitor, and EN-SCAN Rugged Lab GC-MS. Each of these three testing solutions are designed for specific applications.

Our Strategy

1^st Detect Corporation

The TRACER 1000 is the first MS-ETD certified by ECAC and approved by TSA for air cargo. We believe the TRACER 1000 significantly outperforms currently deployed competitive trace detection solutions based on IMS technology, specifically related to false alarm rate, probability of detection, and unit up-time. Many of our sales to-date have come from the cargo security industry where false alarms can cause expensive delays and facility shutdowns as the false alarms are cleared, preventing the mission critical continuous flow of time sensitive packages. We have also expanded into the airport passenger screening market with sales to a distributor who services a major international airport in Asia and another who services airports in Romania. We are currently accepting orders for the TRACER 1000 ~~NTD~~ETD and ~~ETD~~NTD. The TRACER 1000 NTD is a high-performance laboratory instrument capable of rapid detection of trace levels of narcotic and explosive compounds in seconds. The TRACER 1000 provides a ruggedized platform that can be applied across various markets including airports, border security, checkpoint, cargo, and infrastructure security, correctional facilities, military, and law enforcement.

We currently market the TRACER 1000 to countries that accept ECAC certification or TSA approval for air cargo. The markets needing explosives and narcotics trace detection with a broader range of compounds and better accuracy include the following:

●	Passenger Airports	●	Cargo Airports
●	Event Venues	●	Embassies
●	Military Bases	●	Government Office Buildings
●	Courthouses	●	Border Checkpoints
●	Law Enforcement Agencies	●	Critical Infrastructure Security Checkpoints

Table of Contents

AgLAB Inc.

Initial interest for the AgLAB-1000 series has come from the hemp and cannabis industry. Many derivative hemp and cannabis products are being manufactured using cannabinoids present in the plant, primarily THC for cannabis and CBD for hemp. Extraction and distillation equipment is used to remove the cannabinoids from the raw plant matter to create an oil that is used in many manufactured products. AgLAB has launched the first of several planned products that have been designed to assist in the distillation processes by maximizing the final product quality and yield.

Current efforts are focused on the U.S. market, but international markets present attractive future growth opportunities as the number of countries with legal recreational or medicinal use continues to expand. We believe agricultural companies engaged in these supply chain activities will benefit from the increased use of MS:

●	Plant material harvesting	●	Ingredient processing
●	Oil distillation	●	Contaminate detection
●	Inspection and certification	●	Formulation and packaging

BreathTech Corporation

The BreathTest-1000 product ~~that~~ is ~~currently under development is~~ being designed to provide an inexpensive, non-invasive screening device for compromised conditions including a bacterial or viral infection that can offer results on-site in a very short period of time. We believe there is strong value for this easy to use screener in high density and critical locations, especially with heightened concern about airborne diseases continuing to pose new or reemerging threats. Most currently available tests either take too long or are invasive and painful. We expect the market need for a quick and painless test will continue to be significant in the following target markets:

●	Hospitals	●	Military
●	Nursing homes	●	Sporting events
●	Airlines	●	Performing arts venues
●	Hotels	●	Convention and conference centers
●	Cruise lines	●	Schools

Pro-Control, Inc.

As part of our growth plan, we have leveraged technology and processes developed by AgLAB to launch a new family of “process control” methods and solutions, which are the focus of Pro-Control. The presence of MS directly on production floors and ultimately integrated directly into manufacturing lines provides the opportunity for manufacturers to increase yields by reducing waste and increasing quality by ensuring consistent purity. Markets which we believe are likely to adopt Pro-Control’s products and services include:

●	Petroleum refining	●	Industrial chemical manufacturing
●	Food processing	●	Nutraceutical manufacturing
●	Pharmaceutical manufacturing

EN-SCAN, Inc.

The ultra-portable rugged GC enables continuous on-site monitoring and immediate response in critical applications. The EN-SCAN product lineup includes three key products: EN-SCAN Handheld GC, EN-SCAN Fenceline Monitor, and EN-SCAN Rugged Lab GC-MS. We expect these products to provide innovative portable environmental testing solutions that empower industries and organizations to accurately monitor and manage environmental challenges in real-time with immediate results. We believe the following markets will utilize this product lineup:

●	Environmental equipment rental	●	Industrial hygienists
●	Environmental consulting firms	●	Chemical plants
●	Refineries

Products and Services

Our products are considered mass spectrometry ~~equipment.~~and ~~Mass~~gas ~~spectrometry~~chromatography ~~is an analytical technique used to measure the mass-to-charge ratio of ions~~equipment. It is commonly employed to identify the composition of a sample by generating a mass spectrum that provides detailed information about the sample's molecular structure, chemical properties, and purity.

Mass Spectrometry

Mass spectrometry is an analytical technique used to measure the mass-to-charge ratio of ions. It is commonly employed to identify the composition of a sample by generating a mass spectrum that provides detailed information about the sample's molecular structure, chemical properties, and purity.

MS is considered a superior method for identifying molecules due to several advantages. We believe our business units are demonstrating these advantages in multiple use cases in our target markets. Speed and specificity are two of the most relevant advantages we highlight during customer conversations. MS can detect and measure minute quantities of a substance making it ideal for trace analysis. It provides precise mass-to-charge (m/z) ratios, which are characteristic of specific molecules or fragments, allowing for accurate identification and differentiation of compounds with similar structures. MS offers rapid analysis, which is especially valuable in manufacturing, security, environmental, and forensic applications where timely results are crucial.

Table of Contents

MS can analyze a wide range of molecules, from small organic compounds to large biomolecules like proteins and nucleic acids. Other separation techniques can be coupled with MS, such as gas chromatography (“GC-MS”) or liquid chromatography (“LC-MS”), to enhance the analysis of complex mixtures and provide additional separation before detection. The innate capabilities of MS and its ability to incorporate multiple sample intake methods allows us to continually expand and adapt the libraries used by our business units for the identification of compounds of interest in new applications of our AMS Technology.

MS is widely used in various industries, including pharmaceuticals, biotechnology, environmental analysis, and materials science, for quality control, research, and development purposes. Historically, these purposes have required high rates of precision which has increased the size, cost, and complexity of legacy MS equipment.

Our core AMS Technology originated from a device specifically designed and manufactured for installation in the International Space Station (“ISS”) to monitor the quality of the air circulating within the ISS. The AMS Technology has been designed to be inexpensive, smaller, and easier to use when compared to traditional mass spectrometers. Unlike other technologies, the AMS Technology works under high vacuum, which eliminates competing molecules, yielding higher resolution and fewer false alarms. The intellectual property includes 17 16 patents granted along with extensive trade secrets.

We have translated the compact, lightweight, and low voltage requirements of the ISS into our current products targeting a much broader array of government agency adoption as well as the variety of industries that can benefit from on-site and in-line MS. 1^st Detect was the first subsidiary successful at licensing, developing, and selling the AMS Technology. Similar to 1^st Detect, each of our business units is developing and delivering MS devices focused on an industry specific use case of the AMS Technology. We also provide our customers with consumable products that are necessary to successfully operate our devices. Routine maintenance and warranty programs are also available to our customers.

~~1st Detect Corporation~~ 11

~~The~~Gas TRACER 1000 is the first MS-ETD certified by ECAC and approved by TSA for air cargo. We are currently accepting orders for the TRACER 1000 ETD and NTD. The TRACER 1000 ETD and NTD are high-performance laboratory instruments capable of rapid detection of trace levels of explosive and narcotic compounds in seconds. The TRACER 1000 ETD and NTD both provide a ruggedized platform that can be applied across various markets including airports, border security, checkpoint, cargo, and infrastructure security, correctional facilities, military, and law enforcement.Chromatography

~~AgLAB~~Gas ~~Inc~~chromatography is used to separate, analyze and quantify compounds that can be vaporized without decomposition. A compound passes through a column and interacts causing them to travel at different rates and thereby separating them. These separated compounds can be detected, recorded, and studied. The separation is determined by the volatility of the compound. GC is a cornerstone application in many scientific and industrial fields. This application offers a wide range of use cases such as real-time fence-line monitoring at chemical plants, rapid disaster response, contamination tracking and emergency safety assessments.

~~Leveraging~~GC ~~the~~is ~~platform~~used ~~AMS~~in ~~Technology~~various industries, ~~AgLAB has~~including ~~designed its~~oil ~~product~~& ~~line~~gas, tomanufacturing, ~~serve~~industrial ~~distillers~~hygienists ~~in the hemp~~ and ~~cannabis~~environmental ~~industry~~consulting firms. Our ~~AgLAB has launched the AgLAB~~on-~~1000-D2~~site, ~~which~~portable technology is designed to ~~be used~~ to ~~determine~~deliver ~~the optimal settings to increase yield and potency during the distillation process. With the AgLAB~~real-~~1000-D2~~time, ~~a sample~~on-site isdata ~~manually introduced into the system~~ for immediate analysis. ~~Currently under development is the AgLAB-1000-D1. When completed, this instrument will be an inline process control unit.~~

~~BreathTech~~The ~~Corporation~~combined GC and MS technology with rugged, portable design delivers lab-grade accuracy in the most demanding environments. These products address the rapidly growing demand for on-site, real-time air, water, and soil analysis.

The BreathTest-1000 is being developed, in conjunction with Cleveland Clinic, to provide an inexpensive, non-invasive screening device for a variety of diseases. The BreathTest-1000 is designed to detect infectious VOC metabolites in a person’s breath.

Pro-Control, Inc.

Pro-Control has introduced the Pro-Control 1000-D2™ to put mass spectrometry on the factory floor at chemical manufacturers. The experience gained by AgLAB with hemp and cannabis distillers was the catalyst for the Pro-Control 1000-D2™ and its related Maximum Value Process solution to analyze samples in real-time and to assist the manufacturer by increasing production and/or quality, reducing both cost and time, and helping to address safety and environmental concerns.

Table of Contents

Customers, Sales, and Marketing

1^st Detect Corporation

Marketing efforts at 1^st Detect are currently focused on the variety of markets that are seeking:

●

Increased uptime in detection equipment

●

Expanding library of detectable explosive and narcotic compounds and threats

Examples of these markets include foreign airports, commercial companies in aviation and cargo security, law enforcement agencies, and security organizations responsible for the protection of sensitive facilities. We employ both direct sales and channel sales through distributors. We now have units deployed in 3034 locations in 1416 countries. While we have had some degree of success securing and fulfilling orders, the sales cycles in the regulated and government markets are normally long and much of the pipeline opportunities were delayed by the COVID-19 pandemic.

AgLAB Inc.

AgLAB uses direct and channel sales. The lease program that we initiated this year with SC Labs is an example of a channel sales program. We do plan to engage with additional channel partners, largely companies with existing distribution channels in the hemp and cannabis market, to help sell our products to target customers.

BreathTech Corporation

~~Efforts~~We ~~are~~believe ~~currently~~commercialization ~~focused~~of onBreathTech Corporation with the ~~development~~AMS ofTechnology ~~the~~would ~~BreathTest-1000~~require many years and significant investment due to regulatory requirements. As Wesuch, ~~will~~we ~~begin~~have ~~marketing~~determined ~~activities~~to ifdeploy ~~the~~capital ~~product~~instead ~~achieves~~to ~~commercial~~our ~~viability~~other subsidiaries.

Pro-Control, Inc.

Currently, Pro-Control uses only direct sales with proof of concept and trial engagements being conducted with companies in close proximity to our Austin, Texas headquarters. We intend to use regional sales teams assigned to geographic territories with a density of manufacturing. There is a high density of food, petrochemical, chemical, and industrial companies within a few hours driving radius of Austin.

EN-SCAN, Inc.

EN-SCAN appeals to a wide range of industries including environmental consulting firms, government agencies, industrial facilities, and academic institutions. These users benefit from the portability, ruggedness, and precision of EN-SCAN’s devices, which eliminate the need for off-site lab testing and streamline compliance and remediation efforts. To enhance customer experience, EN-SCAN can offer training programs, data integration support, and a centralized portal for device management and analytics.

Competition

1^st Detect Corporation

Competition for the TRACER 1000 comes primarily from IMS-based ETDs. We have several competitors that sell IMS-based ETDs whose companies are much larger than us, with well-established sales forces and offering a wider range of security products; however, based on industry discussions and our field trials we believe the TRACER 1000 has a number of attributes that are superior to competing products.

IMS-ETD			1st Detect’s TRACER 1000
1st Detect’s TRACER 1000
	●	~~False~~Near-zero ~~alarms~~false ~~caused by confusants~~alarms		●	~~Near-zero false alarm rate~~
	●	~~Lower~~Limitless ~~probability~~library ~~of detection~~expansion		●	~~Higher probability of detection~~
	●	~~Numerous~~High ~~unscheduled~~uptime ~~bake-outs~~ and ~~calibrations~~robustness		●	~~Near 100% up-time~~
	●	~~Limited~~Fast ~~library~~cleardown ofand ~~compounds~~near ofzero ~~interest~~false alarms increase throughput		●	~~Unlimited library of compounds of interest~~
	●	~~Addition~~Confirmatory ~~of new compounds may require hardware changes~~technology		●	~~Library updates that do not require hardware changes~~
	●	False alarms cause delays or shutdowns at security facilities/inspection checkpoints		●	Improved throughput at security facilities and checkpoints
	●	Low price chemical detector		●	Competitive price to IMS in a throughput sensitive environment

These claims have been confirmed in numerous discussions with industry experts and verified in our many field trials.

Table of Contents

AgLAB Inc.

The currently available technology that we believe to be the only direct competition to our MS-based system is high performance liquid chromatography (“HPLC”). We believe the AgLAB-1000 series of products offers a more customer-friendly interface, quicker results, and, once the AgLAB-1000-D1 is launched, the ability to provide closed loop process control, ensuring maximum yield and product quality.

BreathTech Corporation

The BreathTest-1000 product ~~that~~ is ~~currently under development is being~~ designed to screen for VOC metabolites in a person’s breath and which could indicate the person may have a compromised condition ~~including but not limited to a bacterial or viral infection~~. Given that breath samples are quick, inexpensive, and painless, we anticipate that the BreathTest-1000 will help screen for signs of disease. We do not see this as competing with traditional tests but supplementing and improving medical care.

Pro-Control, Inc.

Manufacturers may deploy the legacy, sophisticated MS equipment available from a number of global OEM’s or send samples to laboratories for off-site testing. In either instance, the time from sample extraction to results will be measured in hours or days. The AMS Technology used by Pro-Control simplifies MS, thereby enabling more users to take advantage of its capabilities with cycle times measured in minutes. We intend for this approach to create new markets where MS has not been adopted in the past due to the complexities presented by the offerings from legacy OEM’s. These OEM’s include ABB, Siemens, Emerson, Thermo Fisher Scientific, Endress and Hauser, Perkin Elmer, Mettler Toledo, PAC LP, Horiba Process Analyzers, and AMETEK.

Customers may have MS adopted but are not using it for process adjustment closer to the manufacturing process, but instead for offline quality control and adjustments to the finished product. In these instances, the analytical capabilities are located in central analytical labs and our intention is to place this testing capability in the hands of the operations personnel to get as close to real time analysis as possible on the factory floor.

EN-SCAN, Inc.

Competitors may include those that are established providers of environment testing equipment, especially those that offer portable GC-MS devices. EN-SCAN differentiates itself through its proprietary ATi Gas Chromatograph and AMS Technology, on-site, rugged design tailored for harsh field conditions, and a product lineup that spans handheld, fenceline, and rugged lab-grade instruments. Its emphasis on real-time, on-site analysis and cost efficiency positions in the environmental testing market.

Research and Development

Astrotech Technologies, Inc.

We invest considerable resources into our internal research and development (“R&D”) functions. Much of our R&D investment is devoted to the cross-platform AMS Technology as the R&D team continually works to develop new derivative products, improve system functionality and reliability, optimize design, reduce cost, and streamline and simplify the software and user experience. Each market, however, typically requires unique sample introduction technology, library development, and customized adjustments to the user interface.

1^st Detect Corporation

While 1^st Detect’s TRACER 1000 is fully commercialized, we continue to invest in library development which resulted in the launch of our narcotics detector. We continue to develop our library to further enhance our offering.

AgLAB Inc.

The AgLAB-1000 series uses the core AMS Technology and is continuing its development of its product line to include other valuable products specific to the hemp and cannabis industry. When complete, the AgLAB-1000-D1 will be an inline process control unit meaning it will be integrated directly into the distillation equipment.

BreathTech Corporation

The BreathTest-1000 employs the core AMS Technology. BreathTech R&D activities are being devoted to sample introduction and library development, which is needed to identify the specific compounds present in the breath that are indicative of the presence of a compromised condition including infections.

Table of Contents

During our fiscal year 2023, we were in correspondence with the U.S. Food and Drug Administration ("FDA") regarding how the FDA will classify the BreathTest-1000 and the classification has not yet been determined. The classification will inform the required FDA premarket submission and review process that will follow. If premarket notification (510(k) submission) is required, we intend to submit a pre-submission request to the FDA. The pre-submission is a formal mechanism for requesting feedback from the FDA prior to submitting a medical device application.

Pro-Control, Inc.

Pro-Control is in the early stages of using the core AMS Technology. It is refining its product line to include other valuable products and it is developing its library for chemical manufacturers.

En-Scan, Inc.

EN-SCAN is set to manufacture and sell a new line of instruments built for environmental testing using its proprietary ATi GC and AMS Technology for outdoor field work for on-site, real-time air, water, and soil analysis providing instant feedback for accurate contamination source location and migration. EN-SCAN’s commitment to innovation is reflected in its active R&D efforts. These R&D advancements not only strengthen EN-SCAN’s competitive edge but also open new opportunities in customer engagement, sales growth, and marketing differentiation.

Certain Regulatory Matters

We are subject to United States federal, state, and local laws and regulations designed to protect the environment and to regulate the discharge of materials into the environment. We are also beholden to certain regulations designed to protect our domestic technology from unintended foreign exploitation and regulate certain business practices. We believe that our policies, practices, and procedures are properly designed to prevent unreasonable risk of environmental damage and consequential financial liability. Our operations are also subject to various regulations under federal laws regarding the international transfer of technology, as well as to various federal and state laws related to business operations. In addition, we are subject to federal contracting procedures, audit, and oversight. Compliance with environmental laws and regulations and technology export requirements has not had and, we believe, will not have in the future, material effects on our capital expenditures, earnings, or competitive position.

Federal regulations that impact our operations include, but are not limited to, the following:

Foreign Corrupt Practices Act. The Foreign Corrupt Practices Act establishes rules for U.S. companies doing business internationally. Compliance with these rules is achieved through established and enforced corporate policies, documented internal procedures, and financial controls.

Iran Nonproliferation Act of 2000. This act authorizes the President of the United States to take punitive action against individuals or organizations known to be providing material aid to weapons of mass destruction programs in Iran.

Federal Acquisition Regulations. Goods and services provided by us to U.S. Government agencies are subject to Federal Acquisition Regulations (“FAR”). These regulations provide rules and procedures for invoicing, documenting, and conducting business under contract with such entities. The FAR also subjects us to audit by federal auditors to confirm such compliance.

Truth in Negotiations Act. The Truth in Negotiations Act was enacted for the purpose of providing full and fair disclosure by contractors in the conduct of negotiations with the U.S. Government. The most significant provision included in the Truth in Negotiations Act is the requirement that contractors submit certified cost and pricing data for negotiated procurements above a defined threshold.

Export Administration Act. This act provides authority to regulate exports, to improve the efficiency of export regulation, and to minimize interference with the ability to engage in commerce.

Export Administration Regulations. The Export Administration Regulations govern whether a person or company may export goods from the U.S., re-export goods from a foreign country, or transfer goods from one person or company to another in a foreign country.

Medical Device Regulation

FDA Premarket Clearance and Approval Requirements. Unless an exemption applies, each medical device, to be lawfully commercially distributed in the U.S., requires either FDA clearance of a 510(k) premarket notification submission, granting of a de novo request, or premarket application (“PMA”) approval. Under the Federal Food Drug and Cosmetic Act (“FDCA”), administered by the FDA, medical devices are classified into one of three classes, Class I, Class II, or Class III, depending on the degree of risk associated with each medical device and the extent of manufacturer and regulatory controls needed to ensure its safety and effectiveness. Class I includes devices with the lowest risk to the patient and are those for which safety and effectiveness can be assured by adherence to the FDA’s general controls for medical devices, which include compliance with the applicable portions of the Quality System Regulation (“QSR”), facility registration and product listing, reporting of adverse medical events, and truthful and non-misleading labeling, advertising, and promotional materials. Some Class I devices may require premarket notification to the FDA.

Table of Contents

Class II devices are moderate risk devices and are subject to the FDA’s general controls, and certain special controls as deemed necessary by the FDA to ensure the safety and effectiveness of the device. These special controls can include performance standards, post-market surveillance, patient registries, and FDA guidance documents. While most Class I devices are exempt from the 510(k) premarket notification requirement, manufacturers of most Class II devices are required to submit to the FDA a premarket notification under Section 510(k) of the FDCA requesting permission to commercially distribute the device. The FDA’s permission to commercially distribute a device subject to a 510(k) premarket notification is generally known as 510(k) clearance. Under the 510(k) process, the manufacturer must submit to the FDA a premarket notification demonstrating that the device is “substantially equivalent” to either a device that was legally marketed prior to May 28, 1976, the date upon which the Medical Device Amendments of 1976 were enacted, or another commercially available device that was cleared to through the 510(k) or de novo process.

Devices deemed by the FDA to pose the greatest risks, such as life-sustaining, life-supporting or some implantable devices, or devices that have a new intended use, or use advanced technology that is not substantially equivalent to that of a legally marketed device, are placed in Class III, requiring approval of a PMA. For a device that is Class III by default (because it is a novel device that was not previously classified and has no predicate), the device manufacturer may request that FDA reclassify the device into Class II or Class I via a de novo request.

510(k) Marketing Clearance. To obtain 510(k) clearance, a premarket notification submission must be submitted to the FDA demonstrating that the proposed device is “substantially equivalent” to a predicate device. A predicate device is a legally marketed device that is not subject to premarket approval, i.e., a device that was legally marketed prior to May 28, 1976 (pre-amendments device) and for which a PMA is not required, a device that has been reclassified from Class III to Class II or I (e.g., via the de novo classification process), or a device that was previously cleared through the 510(k) process. The FDA’s 510(k) review process usually takes from three to six months but may take longer. The FDA may require additional information, including clinical data, to make a determination regarding substantial equivalence. If the FDA agrees that the device is substantially equivalent to a predicate device, it will grant 510(k) clearance to market the device.

After a device receives 510(k) marketing clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change or modification in its intended use, will require a new 510(k) marketing clearance or, depending on the modification, a de novo request or PMA approval. The FDA requires each manufacturer to determine whether the proposed change requires submission of a 510(k), de novo or a PMA in the first instance, but the FDA can review that decision and disagree with a manufacturer’s determination. If the FDA disagrees with a manufacturer’s determination, the FDA may take a wide range of enforcement actions, including, but not limited to, issuing a warning letter, withdrawing existing 510(k) clearance(s), and/or requesting a recall of the modified device. In addition, the manufacturer must cease marketing of the modified device until FDA has cleared or approved a new 510(k), de novo or PMA for the change, if ever. Also, in these circumstances, the manufacturer may be subject to significant regulatory fines or penalties.

De Novo Process. If a previously unclassified new medical device does not qualify for the 510(k) pre-market notification process because no predicate device to which it is substantially equivalent can be identified, the device is automatically classified into Class III. The Food and Drug Administration Modernization Act of 1997 established a new route to market for low to moderate risk medical devices that are automatically placed into Class III due to the absence of a predicate device, called the “Request for Evaluation of Automatic Class III Designation,” or the de novo classification procedure. This procedure allows a manufacturer whose novel device is automatically classified into Class III to request down-classification of its medical device into Class I or Class II on the basis that the device presents low or moderate risk, rather than requiring the submission and approval of a PMA. Prior to the enactment of the Food and Drug Administration Safety and Innovation Act (“FDASIA”) in July 2012, a medical device could only be eligible for de novo classification if the manufacturer first submitted a 510(k) pre-market notification and received a determination from the FDA that the device was not substantially equivalent. FDASIA streamlined the de novo classification pathway by permitting (under Section 513(f)(2) of the FDCA) manufacturers to request de novo classification directly without first submitting a 510(k) pre-market notification to the FDA and receiving a not substantially equivalent determination. FDASIA sets a review time for FDA of 120 days following receipt of the de novo application, but FDA does not always meet this timeline and has publicly only committed to a review of 150 days for 50% of applications. If the manufacturer seeks reclassification into Class II, the manufacturer must include a draft proposal for special controls that are necessary to provide a reasonable assurance of the safety and effectiveness of the medical device. The FDA may reject the reclassification petition if it identifies a legally marketed predicate device that would be appropriate for a 510(k) or determines that the device is not low to moderate risk or that general controls would be inadequate to control the risks and special controls cannot be developed. If the FDA agrees with the down-classification, the de novo applicant will then receive authorization to market the device, and a classification regulation will be established for the device type. The device can then be used as a predicate device for future 510(k) submissions by the manufacturer or a competitor. In October 2021, FDA enacted regulations implementing the above-referenced FDCA provisions governing the de novo reclassification process.

Table of Contents

Premarket Approval Process. Class III devices require submission through the PMA process before they can be marketed. The PMA process is more demanding than the 510(k) premarket notification process. Under the PMA pathway, the manufacturer must demonstrate that the investigational device is safe and effective for the target indication(s) for use, and the PMA must be supported by extensive data, including data from preclinical studies and human clinical trials conducted under a valid investigational device exemption (“IDE”). The PMA must also contain, among other things, a full description of the device and its components, a full description of the methods, facilities and controls used for manufacturing, and proposed labeling. Following receipt of a PMA submission, the FDA determines whether the application is sufficiently complete to permit a substantive review. If the FDA accepts the application for review, it has 180 days under the FDCA to complete its review of a PMA, although in practice, the FDA’s review often takes significantly longer, and can take up to several years. An advisory panel of experts from outside the FDA may be convened to review and evaluate the application and provide recommendations to the FDA as to the approvability of the device. The FDA may or may not accept the panel’s recommendation. In addition, the FDA will generally conduct a preapproval inspection of the applicant or its third-party manufacturers’ or suppliers’ manufacturing facility or facilities to ensure compliance with the QSR.

The FDA will approve the new device for commercial distribution if it determines that the data and information in the PMA application constitute valid scientific evidence and that there is reasonable assurance that the device is safe and effective for its intended use(s). The FDA may approve a PMA application with post-approval conditions intended to ensure the safety and effectiveness of the device, including, among other things, restrictions on labeling, promotion, sale and distribution, and collection of long-term follow-up data from patients in the clinical study that supported PMA approval or requirements to conduct additional clinical studies post-approval. The FDA may condition PMA approval on some form of post-market surveillance when deemed necessary to protect the public health or to provide additional safety and efficacy data for the device in a larger population or for a longer period of use. In such cases, the manufacturer might be required to follow certain patient groups for a number of years and to make periodic reports to FDA on the clinical status of those patients. Failure to comply with the conditions of approval can result in material adverse enforcement action, including withdrawal of the approval.

Certain changes to an approved device, such as changes in manufacturing facilities, methods, or quality control procedures, or changes in the design performance specifications, which affect the safety or effectiveness of the device, require submission of a PMA supplement. PMA supplements often require submission of the same type of information as a PMA, except that the supplement is limited to information needed to support any changes from the device covered by the original PMA and may not require as extensive clinical data or the convening of an advisory panel. Certain other changes to an approved device require the submission of a new PMA, such as when the design change causes a different intended use, mode of operation, and technical basis of operation, or when the design change is so significant that a new generation of the device will be developed, and the data that were submitted with the original PMA are not applicable for the change in demonstrating a reasonable assurance of safety and effectiveness.

Clinical Trials. Clinical trials are almost always required to support de novo or a PMA and are sometimes required to support a 510(k) submission. All clinical investigations of investigational devices to determine safety and effectiveness must be conducted in accordance with the FDA’s IDE regulations which govern investigational device labeling, prohibit promotion of the investigational device, and specify an array of recordkeeping, reporting and monitoring responsibilities of study sponsors and study investigators. If the device presents a “significant risk” to human health, as defined by the FDA, the FDA requires the device sponsor to submit an IDE application to the FDA, which must become effective prior to commencing human clinical trials. A significant risk device is one that presents a potential for serious risk to the health, safety or welfare of a patient and either is implanted, used in supporting or sustaining human life, substantially important in diagnosing, curing, mitigating or treating disease or otherwise preventing impairment of human health, or otherwise presents a potential for serious risk to a subject. An IDE application must be supported by appropriate data, such as animal and laboratory test results, showing that it is safe to test the device in humans and that the testing protocol is scientifically sound. The IDE will automatically become effective 30 days after receipt by the FDA, unless the FDA notifies the manufacturer that the investigation may not begin or is subject to a clinical hold. If the FDA determines that there are deficiencies or other concerns with an IDE for which it requires modification, the FDA may permit a clinical trial to proceed under a conditional approval.

In addition, clinical studies must be approved by, and conducted under the oversight of, an Institutional Review Board ("IRB") for each clinical site. The IRB is responsible for the initial and continuing review of the IDE and may pose additional requirements for the conduct of the trial. If an IDE application is approved by the FDA and one or more IRBs, human clinical trials may begin at a specific number of investigational sites with a specific number of patients, as approved by the FDA. If the device presents a non-significant risk to the patient, a sponsor may begin the clinical trial after obtaining approval for the trial by one or more IRBs without separate approval from the FDA, but must still follow abbreviated IDE requirements, such as monitoring the investigation, ensuring that the investigators obtain informed consent, and labeling and record-keeping requirements. An IDE supplement must be submitted to and approved by the FDA before a sponsor or investigator may make a change to the investigational plan.

Table of Contents

During a clinical trial, the sponsor is required to comply with the applicable FDA requirements, including, for example, trial monitoring, selecting clinical investigators and providing them with the investigational plan, ensuring IRB review, adverse event reporting, record keeping, and prohibitions on the promotion of investigational devices or on making safety or effectiveness claims for them. The clinical investigators in the clinical study are also subject to FDA regulations and must obtain patient informed consent, rigorously follow the investigational plan and study protocol, control the disposition of the investigational device, and comply with all reporting and recordkeeping requirements. Additionally, after a trial begins, we, the FDA, or the IRB could suspend or terminate a clinical trial at any time for various reasons, including a belief that the risks to study subjects outweigh the anticipated benefits.

Post-market Regulation. After a device is cleared or approved for marketing, numerous and pervasive regulatory requirements continue to apply. These include (among others):

●

establishment registration and device listing with the FDA;

●

state licensure requirements for the manufacturing and distribution of medical devices;

●

FDA’s QSR requirements, which require manufacturers, including third-party manufacturers, to follow stringent design, testing, control, documentation, and other quality assurance procedures during all aspects of the design and manufacturing process;

●

FDA labeling and marketing regulations, which require that promotion is truthful, not misleading, fairly balanced, provide adequate directions for use, and that all claims are substantiated, and also prohibit the promotion of products for unapproved or “off-label” uses and impose other restrictions on labeling;

●

FDA regulations and guidance pertaining to clearance or approval of product modifications to 510(k)-cleared devices that could significantly affect safety or effectiveness or that would constitute a major change in intended use of one of our cleared devices, or approval of a supplement for certain modifications to PMA devices;

●

FDA’s medical device reporting (“MDR”) regulations, which require that a manufacturer report to the FDA if a device it markets may have caused or contributed to a death or serious injury, or has malfunctioned and the device or a similar device that it markets would be likely to cause or contribute to a death or serious injury, if the malfunction were to recur;

●

FDA’s correction, removal, and recall reporting regulations, which require that manufacturers report to the FDA field corrections and product recalls or removals if undertaken to reduce a risk to health posed by the device or to remedy a violation of the FDCA that may present a risk to health;

●

FDA regulations requiring Unique Device Identifiers on devices and also requiring the submission of certain information about each device to the FDA’s Global Unique Device Identification Database;

●

the FDA’s recall authority, whereby the agency can order device manufacturers to recall from the market a product that is in violation of governing laws and regulations;

●

FDA post-market surveillance activities and regulations, which apply when deemed by the FDA to be necessary to protect the public health or to provide additional safety and effectiveness data for the device;

●

the federal Physician Sunshine Act and various state and foreign laws on reporting remunerative relationships with health care professionals, teaching hospitals, and other applicable entities;

●

the federal Anti-Kickback Statute (and similar state laws) prohibiting, among other things, soliciting, receiving, offering or providing remuneration intended to induce the purchase or recommendation of an item or service reimbursable under a federal healthcare program, such as Medicare or Medicaid. A person or entity does not have to have actual knowledge of this statute or specific intent to violate it to have committed a violation; and

●

the federal False Claims Act (and similar state laws) prohibiting, among other things, knowingly presenting, or causing to be presented, claims for payment or approval to the federal government that are false or fraudulent, knowingly making a false statement material to an obligation to pay or transmit money or property to the federal government or knowingly concealing, or knowingly and improperly avoiding or decreasing, an obligation to pay or transmit money to the federal government. The government may assert that claim includes items or services resulting from a violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the false claims statute.

Table of Contents

We may be subject to similar foreign laws that may include applicable post-marketing requirements such as safety surveillance. With respect to any medical devices that we may commercialize in the U.S. in the future, our manufacturing processes, or those of any contract manufacturer that we engage, will be required to comply with the applicable portions of the QSR, which cover the methods and the facilities, controls for the design, manufacture, testing, production, processes, controls, quality assurance, labeling, packaging, distribution, installation, and servicing of finished devices intended for human use. The QSR also requires, among other things, maintenance of a device master file, device history file, and complaint files. The discovery of previously unknown problems with any of our products, including unanticipated adverse events or adverse events of increasing severity or frequency, whether resulting from the use of the device within the scope of its clearance or off-label by a physician in the practice of medicine, could result in restrictions on the device, including the removal of the product from the market or voluntary or mandatory device recalls.

The FDA has broad regulatory compliance and enforcement powers. If the FDA determines that we failed to comply with applicable regulatory requirements, it can take a variety of compliance or enforcement actions, which may result in any of the following sanctions:

●

warning letters, untitled letters, fines, injunctions, consent decrees, and civil penalties;

●

recalls, withdrawals, or administrative detention or seizure of our products;

●

operating restrictions or partial suspension or total shutdown of production (due to violations of the QSR or other applicable regulations) refusing or delaying requests for 510(k) marketing clearance or PMA approvals of new products or modified products;

●

withdrawing 510(k) clearances or PMA approvals that have already been granted;

●

refusal to grant export or import approvals for our products; or

●

criminal prosecution.

Regulation of Medical Devices in the EEA

Medical devices placed on the market in the European Economic Area ("EEA") must meet the relevant essential requirements laid down in Annex I of Directive 93/42/EEC concerning medical devices ("the Medical Devices Directive"). The most fundamental essential requirement is that a medical device must be designed and manufactured in such a way that it will not compromise the clinical condition or safety of patients, or the safety and health of users and others. In addition, the device must achieve the performances intended by the manufacturer and be designed, manufactured, and packaged in a suitable manner. The European Commission has adopted various standards applicable to medical devices. These include standards governing common requirements, such as sterilization and safety of medical electrical equipment and product standards for certain types of medical devices. There are also harmonized standards relating to design and manufacture. While not mandatory, compliance with these standards is viewed as the easiest way to satisfy the essential requirements as a practical matter. Compliance with a standard developed to implement an essential requirement also creates a rebuttable presumption that the device satisfies that essential requirement.

To demonstrate compliance with the essential requirements laid down in Annex I to the Medical Devices Directive, medical device manufacturers must undergo a conformity assessment procedure, which varies according to the type of medical device and its classification. Conformity assessment procedures require an assessment of available clinical evidence, literature data for the product, and post-market experience in respect of similar products already marketed. Except for low-risk medical devices (Class I non-sterile, non-measuring devices), where the manufacturer can self-declare the conformity of its products with the essential requirements (except for any parts which relate to sterility or metrology), a conformity assessment procedure requires the intervention of a Notified Body. Notified bodies are often separate entities and are authorized or licensed to perform such assessments by government authorities. The notified body would typically audit and examine a product’s technical dossiers and the manufacturers’ quality system. If satisfied that the relevant product conforms to the relevant essential requirements, the notified body issues a certificate of conformity, which the manufacturer uses as a basis for its own declaration of conformity. The manufacturer may then apply the CE Mark to the device, which allows the device to be placed on the market throughout the EEA. Once the product has been placed on the market in the EEA, the manufacturer must comply with requirements for reporting incidents and field safety corrective actions associated with the medical device.

Table of Contents

In order to demonstrate safety and efficacy for their medical devices, manufacturers must conduct clinical investigations in accordance with the requirements of Annex X to the Medical Devices Directive ("MDD"), Annex 7 of the Active Implantable Medical Devices Directive ("AIMDD"), and applicable European and International Organization for Standardization standards, as implemented or adopted in the EEA member states. Clinical trials for medical devices usually require the approval of an ethics review board and approval by or notification to the national regulatory authorities. Both regulators and ethics committees also require the submission of serious adverse event reports during a study and may request a copy of the final study report.

On April 5, 2017, the European Parliament passed the Medical Devices Regulation (Regulation 2017/745), which repeals and replaces the E.U. Medical Devices Directive and the Active Implantable Medical Devices Directive. Unlike directives, which must be implemented into the national laws of the EEA member States, the regulations would be directly applicable, i.e., without the need for adoption of EEA member State laws implementing them, in all EEA member States and are intended to eliminate current differences in the regulation of medical devices among EEA member States. The Medical Devices Regulation, among other things, is intended to establish a uniform, transparent, predictable, and sustainable regulatory framework across the EEA for medical devices and ensure a high level of safety and health while supporting innovation. The Medical Device Regulation will become applicable in May 2021. The new regulations:

●

strengthen the rules on placing devices on the market and reinforce surveillance once they are available;

●

establish explicit provisions on manufacturers’ responsibilities for the follow-up of the quality, performance, and safety of devices placed on the market;

●

improve the traceability of medical devices throughout the supply chain to the end-user or patient through a unique identification number;

●

set up a central database to provide patients, healthcare professionals, and the public with comprehensive information on products available in the E.U.;

●

strengthened rules for the assessment of certain high-risk devices, such as implants, which may have to undergo an additional check by experts before they are placed on the market.

In the European Union, member states are responsible for enforcing the EU’s medical device rules and for ensuring that only compliant medical devices are placed on the market or put into service in their jurisdictions. They have powers to suspend the marketing and use, or demand the recall, of unsafe or non-compliant devices. They also have the power to bring enforcement action against companies or individuals for breaches of the device rules. Non-compliance may also result in Notified Bodies revoking any certificate of conformity that they have issued for a device or the manufacturer’s quality system.

We are subject to regulations and product registration requirements in many foreign countries in which we may sell our products, including in the areas of:

●

design, development, and manufacturing;

●

product standards;

●

product safety;

●

product safety reporting;

●

marketing, sales, and distribution;

●

packaging and storage requirements;

●

labeling requirements;

●

content and language of instructions for use;

●

clinical trials;

Table of Contents

●

record keeping procedures;

●

advertising and promotion;

●

recalls and field corrective actions;

●

post-market surveillance, including reporting of deaths or serious injuries and malfunctions that, if they were to recur, could lead to death or serious injury;

●

import and export restrictions;

●

tariff regulations, duties, and tax requirements;

●

registration for reimbursement; and

●

necessity of testing performed in country by distributors for licensees.

The time required to obtain clearance required by foreign countries may be longer or shorter than that required for FDA clearance, and requirements for licensing a product in a foreign country may differ significantly from FDA requirements.

Federal, State, and Foreign Fraud and Abuse and Physician Payment Transparency Laws. In addition to FDA restrictions on marketing and promotion of drugs and devices, other federal and state laws may restrict our business practices if our products will be reimbursable under federal or state healthcare programs. These laws include, without limitation, foreign, federal, and state anti-kickback and false claims laws, as well as transparency laws regarding payments or other items of value provided to healthcare providers.

The federal Anti-Kickback Statute prohibits, among other things, knowingly and willfully offering, paying, soliciting or receiving any remuneration (including any kickback, bribe or rebate), directly or indirectly, overtly or covertly, in cash or in kind to induce or in return for purchasing, leasing, ordering or arranging for or recommending the purchase, lease or order of any good, facility, item or service reimbursable, in whole or in part, under Medicare, Medicaid or other federal healthcare programs.

Violations of the federal Anti-Kickback Statute may result in civil monetary penalties up to $100,000 for each violation, plus up to three times the remuneration involved. Civil penalties for such conduct can further be assessed under the federal False Claims Act. Violations can also result in criminal penalties, including criminal fines of up to $100,000 and/or imprisonment of up to 10 years. Similarly, violations can result in exclusion from participation in government healthcare programs, including Medicare and Medicaid. Liability under the federal Anti-Kickback Statute may also arise because of the intentions or actions of the parties with whom we do business.

The federal civil False Claims Act prohibits, among other things, any person or entity from knowingly presenting, or causing to be presented, a false or fraudulent claim for payment or approval to the federal government or knowingly making, using or causing to be made or used a false record or statement material to a false or fraudulent claim to the federal government. A claim includes “any request or demand” for money or property presented to the U.S. government. The federal civil False Claims Act also applies to false submissions that cause the government to be paid less than the amount to which it is entitled, such as a rebate. Intent to deceive is not required to establish liability under the federal civil False Claims Act.

In addition, private parties may initiate “qui tam” whistleblower lawsuits against any person or entity under the federal civil False Claims Act in the name of the government and share in the proceeds of the lawsuit. Penalties for federal civil False Claim Act violations include fines for each false claim, plus up to three times the amount of damages sustained by the federal government and, most critically, may provide the basis for exclusion from the federally funded healthcare program The criminal False Claims Act prohibits the making or presenting of a claim to the government knowing such claim to be false, fictitious or fraudulent and, unlike the federal civil False Claims Act, requires proof of intent to submit a false claim. When an entity is determined to have violated the federal civil False Claims Act, the government may impose civil fines and penalties ranging from $11,803 to $23,607 for each false claim, plus treble damages, and exclude the entity from participation in Medicare, Medicaid, and other federal healthcare programs.

The Civil Monetary Penalty Act of 1981 imposes penalties against any person or entity that, among other things, is determined to have presented or caused to be presented a claim to a federal healthcare program that the person knows or should know is for an item or service that was not provided as claimed or is false or fraudulent, or offering or transferring remuneration to a federal healthcare beneficiary that a person knows or should know is likely to influence the beneficiary’s decision to order or receive items or services reimbursable by the government from a particular provider or supplier.

Table of Contents

The Health Insurance Portability and Accountability Act of 1996, as amended by the Health Information Technology for Economic and Clinical Health Act (“HITECH”) and including implementing regulations (collectively, “HIPAA”) also created additional federal criminal statutes that prohibit among other actions, knowingly and willfully executing, or attempting to execute, a scheme to defraud any healthcare benefit program, including private third-party payors, knowingly and willfully embezzling or stealing from a healthcare benefit program, willfully obstructing a criminal investigation of a healthcare offense, and knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false, fictitious or fraudulent statement in connection with the delivery of or payment for healthcare benefits, items or services. Similar to the federal Anti-Kickback Statute, a person or entity does not need to have actual knowledge of the statute or specific intent to violate it in order to have committed a violation.

Many foreign countries have similar laws relating to healthcare fraud and abuse. Foreign laws and regulations may vary greatly from country to country. For example, the advertising and promotion of our products is subject to E.U. directives concerning misleading and comparative advertising and unfair commercial practices, as well as other EEA Member State legislation governing the advertising and promotion of medical devices. These laws may limit or restrict the advertising and promotion of our products to the general public and may impose limitations on our promotional activities with healthcare professionals. Also, many U.S. states have similar fraud and abuse statutes or regulations that may be broader in scope and may apply regardless of payor, in addition to items and services reimbursed under Medicaid and other state programs.

Data Privacy and Security Laws. In the future, we may also be subject to various federal, state, and foreign laws that protect personal information including certain patient health information, such as the E.U. General Data Protection Regulation (“GDPR”) and the California Consumer Privacy Act (“CCPA”), and restrict the use and disclosure of patient health information, such as HIPAA, and analogous state laws, many of which apply more broadly than HIPAA, in the U.S.

HIPAA established uniform standards governing the conduct of certain electronic healthcare transactions and requires certain entities, called covered entities (as defined under HIPAA), to comply with standards that include the privacy and security of Protected Health Information (“PHI”). HIPAA also requires business associates (as defined under HIPAA), that may include independent contractors or agents of covered entities that access, use or disclose PHI in connection with providing a service to or on behalf of a covered entity to enter into business associate agreements with the covered entity and to safeguard the covered entity’s PHI against improper use and disclosure.

The HIPAA privacy regulations cover the use and disclosure of PHI by covered entities as well as business associates, which are defined to include subcontractors that create, receive, maintain, or transmit PHI on behalf of a business associate. They also set forth certain rights that an individual has with respect to his or her PHI maintained by a covered entity, including the right to access or amend certain records containing PHI, or to request restrictions on the use or disclosure of PHI. The security regulations establish requirements for safeguarding the confidentiality, integrity, and availability of PHI that is electronically transmitted or electronically stored. HITECH, among other things, established certain health information security breach notification requirements. A covered entity must notify any individual whose PHI is breached according to the specifications set forth in the breach notification rule. The HIPAA privacy and security regulations establish a uniform federal “floor” and do not supersede state laws that are more stringent or provide individuals with greater rights with respect to the privacy or security of, and access to, their records containing PHI or insofar as such state laws apply to personal information that is broader in scope than PHI as defined under HIPAA.

HIPAA requires the notification of patients, and other compliance actions, in the event of a breach of unsecured PHI. If notification to patients of a breach is required, such notification must be provided without unreasonable delay and in no event later than 60 calendar days after discovery of the breach. In addition, if the PHI of 500 or more individuals is improperly used or disclosed, we would be required to report the improper use or disclosure to HHS which would post the violation on its website, and to the media. Failure to comply with the HIPAA privacy and security standards can result in civil monetary penalties up to $63,973 per violation, not to exceed an aggregate of $1.92 million per calendar year, and, in certain circumstances, criminal penalties with fines up to $250,000 per violation and/or imprisonment.

HIPAA authorizes state attorneys general to file suit on behalf of their residents for violations. Courts are able to award damages, costs and attorneys’ fees related to violations of HIPAA in such cases. While HIPAA does not create a private right of action allowing individuals to file suit against us in civil court for violations of HIPAA, its standards have been used as the basis for duty of care cases in state civil suits such as those for negligence or recklessness in the misuse or breach of PHI. In addition, HIPAA mandates that the Secretary of HHS conduct periodic compliance audits of HIPAA covered entities, and their business associates for compliance with the HIPAA privacy and security standards. It also tasks HHS with establishing a methodology whereby harmed individuals who were the victims of breaches of unsecured PHI may receive a percentage of the civil monetary penalty paid by the violator.

Table of Contents

In addition, California enacted the CCPA, effective January 1, 2020, which, among other things, creates new data privacy obligations for covered companies and provides new privacy rights to California residents, including the right to opt out of certain disclosures of their information. The CCPA also creates a private right of action with statutory damages for certain data breaches, thereby potentially increasing risks associated with a data breach. Although the law includes limited exceptions, including for “protected health information” maintained by a covered entity or business associate, it may regulate or impact our processing of personal information depending on the context.

In the EEA, we may become subject to laws which restrict our collection, control, processing, and other use of personal data (i.e., data relating to an identifiable living individual) including the GDPR (and any national laws implementing the GDPR). As part of our operations, we process personal data belonging to data subjects in the EEA, including employees, contractors, suppliers, distributors, service providers, customers, patients, or clinical trial participants. For patients or clinical trial participants, we process special categories of personal data like health and medical information. We need to ensure compliance with the GDPR (and any applicable national laws implementing the GDPR) in each applicable EEA jurisdiction.

Healthcare Reform. The U.S. and some foreign jurisdictions are considering or have enacted a number of legislative and regulatory proposals to change the healthcare system in ways that could affect our ability to sell our products profitably. Among policy makers and payors in the U.S. and elsewhere, there is significant interest in promoting changes in healthcare systems with the stated goals of containing healthcare costs, improving quality or expanding access. Current and future legislative proposals, on both a national and state level, to further reform healthcare or reduce healthcare costs may limit coverage of or lower reimbursement for the procedures associated with the use of our products. The cost containment measures that payors and providers are instituting and the effect of any healthcare reform initiative implemented in the future could impact our revenue from the sale of our medical products, to the extent any are authorized for commercialization in the United States.

We expect additional state and federal healthcare reform measures to be adopted in the future, any of which could limit the amounts that federal and state governments will pay for healthcare products and services, which could result in reduced demand for our products or additional pricing pressure.

US Government Regulation of the Cannabis Industry

While we do not generate any revenue from the direct sale of cannabis products, we offer our services and solutions to cultivators operating within the cannabis industry. Marijuana is a Schedule I controlled substance and is illegal under federal law. Even in those states in which specific uses of marijuana have been legalized, such as medical marijuana or for adult recreational purposes, its use remains a violation of federal laws, subject to the narrow exception carved out by the 2018 Farm Bill.

A Schedule I controlled substance is defined as a substance that has no currently accepted medical use in the United States, a lack of safety for use under medical supervision and a high potential for abuse. The Department of Justice defines Schedule I controlled substances as “the most dangerous drugs of all the drug schedules with potentially severe psychological or physical dependence.” If the federal government decides to enforce the Controlled Substances Act with respect to marijuana, persons that are charged with distributing, possessing with intent to distribute, or growing cannabis in violation of federal law could be subject to fines and terms of imprisonment, the maximum being life imprisonment and a $50 million fine. Any unfavorable change in the federal government’s enforcement of current federal laws could cause significant financial damage to the industry. While we do not intend to directly harvest, manufacture, distribute or sell cannabis or cannabis products, we may be detrimentally affected by a change in enforcement by the federal or state governments.

Table of Contents

In the past, the Obama administration took the position that it was not an efficient use of resources to direct federal law enforcement agencies to prosecute those lawfully abiding by state-designated laws allowing the use and distribution of medical marijuana. The Trump administration revised this policy but made no major changes in enforcement. Although President Biden stood for decriminalization and descheduling during his campaign, his administration has not formulated an explicit policy on cannabis. The Biden administration has implemented pardons for past federal cannabis possession convictions and encouraged governors to do the same. Also, in May 2021 the Drug Enforcement Administration approved licensed facilities to grow cannabis for the purpose of medical research, and on December 2, 2022, President Biden signed the Medical Marijuana and Cannabidiol Research Expansion Act. This act is “the first standalone marijuana-related bill approved by both chambers of the United States Congress” and allows medical marijuana research. The act requires the Drug Enforcement Administration to register researchers and suppliers of cannabis for medical research in a timely manner, who will then be able to legally manufacture, distribute, dispense and possess the substance. It also creates a mechanism for FDA approval of drugs derived from the cannabis plant and “protects doctors who may now discuss the harms and benefits of using cannabis and cannabis derivatives.” It also requires the Department of Health and Human Services to investigate the medical utility of cannabis and barriers that exist to conducting research, and requires the U.S. Attorney General to conduct an annual review to ensure that cannabis is being adequately produced for research purposes. In January 2023, the FDA stated that given the growing cannabidiol (CBD) products market, it had convened a high-level internal working group to explore potential regulatory pathways for CBD products and is prepared to find a new regulatory pathway for CBD to balance individuals’ desire for access to CBD products with the regulatory oversight needed to manage risks. Notwithstanding the actions of the Biden administration, it should be expected that the Department of Justice will continue to enforce the Controlled Substances Act with respect to cannabis under established principles in setting their law enforcement priorities to prevent:

●

the distribution of cannabis products, such as marijuana, to minors;

●

criminal enterprises, gangs and cartels receiving revenue from the sale of cannabis;

●

the diversion of cannabis products from states where it is legal under state law to states where it is not legal under state law;

●

the use of state-authorized cannabis activity as a cover or pretext for the trafficking of other illegal drugs or other illegal activity;

●

violence and the use of firearms in the cultivation and distribution of cannabis products;

●

driving while impaired and the exacerbation of other adverse public health and safety consequences associated with cannabis product usage;

●

the growing of cannabis on public lands; and

●

cannabis possession or use on federal property.

Since the use of marijuana is illegal under federal law, most federally chartered banks will not accept deposit funds from businesses involved with marijuana. Consequently, businesses involved in the marijuana industry generally bank with state-chartered banks and credit unions to provide banking to the industry.

In 2014, Congress passed a spending bill containing a provision (the Rohrabacher-Farr amendment and sometimes referred to as the Rohrabacher-Blumenauer Amendment) blocking federal funds and resources allocated under the federal appropriations bills from being used to “prevent such States from implementing their own State medical marijuana laws.” The Rohrabacher-Blumenauer Amendment, however, did not codify any federal protections for medical marijuana patients and producers operating within state law. The Justice Department maintains that it can still prosecute violations of the federal cannabis laws and continue cases already in the courts. The Rohrabacher-Blumenauer Amendment must be re-enacted every year, and it is continued through September 30, 2023. However, state laws do not supersede the prohibitions set forth in the federal drug laws.

In order to participate in either the medical or the adult use aspects of the cannabis industry, all businesses and employees must obtain licenses from the state and, for businesses, local jurisdictions as well. As an example, Colorado issues four types of business licenses including cultivation, manufacturing, dispensing, and testing. In addition, all owners and employees must obtain an occupational license to be permitted to own or work in a facility. All applicants for licenses undergo a background investigation, including a criminal record check for all owners and employees.

Table of Contents

Colorado has also enacted stringent regulations governing the facilities and operations of cannabis businesses that are involved with the plant and its products. All facilities are required to be licensed by the state and local authorities and are subject to comprehensive security and surveillance requirements. In addition, each facility is subject to extensive regulations that govern its businesses practices, which includes mandatory seed-to-sale tracking and reporting, health and sanitary standards, packaging and labeling requirements, and product testing for potency and contaminants.

Laws and regulations affecting the medical marijuana industry are constantly changing, which could detrimentally affect our proposed operations. Local, state and federal medical marijuana and hemp laws and regulations are broad in scope and subject to evolving interpretations, which could require us to incur substantial costs associated with compliance or alter our business plan. It is also possible that regulations may be enacted in the future that will be directly applicable to our business. We cannot predict the nature of any future laws, regulations, interpretations or applications, nor can we determine what effect additional governmental regulations or administrative policies and procedures, when and if promulgated, could have on our business.

Regulatory Compliance and Risk Management

We maintain compliance with regulatory requirements and manage our risks through a program of compliance, awareness, and insurance, which includes maintaining certain insurances and a continued emphasis on safety to mitigate any risks.

Employees

As of June 30, ~~2024~~2025, we employed 3032 employees, none of which were covered by any collective bargaining agreements.

Website

For more information on the Company’s business operations, please visit our company website at www.astrotechcorp.com.

An investment in our securities involves a high degree of risk. This annual report will contain a discussion of the risks applicable to an investment in our securities. Prior to making a decision about investing in our securities, you should carefully consider the specific factors discussed under the heading “Risk Factors” in this annual report. The risks and uncertainties we have described are not the only ones we face. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also affect our operations. The occurrence of any of these known or unknown risks might cause you to lose all or part of your investment in the offered securities.

Item 1A. Risk Factors

Summary Risk Factors

Our business is subject to a number of risks, including those described at length below. The following is a summary of some of the principal risks we face:

● ~~Risks~~We ~~Related~~have toincurred ~~Our~~significant ~~Business~~losses since inception and ~~Industry~~anticipate that we will incur continued losses for the foreseeable future.

● ~~Legal~~Our business units are in the development stage. They have earned limited revenues and ~~Regulatory~~it ~~Risks~~is uncertain whether they will earn any revenues in the future or whether any of them will ultimately be profitable.

● ~~Risks~~We ~~Related~~may need to ~~Ownership~~raise additional capital to fund the operations of ~~Our~~our ~~Common~~business ~~Stock~~units and commercialize our products.

● ~~General~~We ~~Risks~~may not be able to obtain patents, other intellectual property protection or licenses for the technologies contained in the products we develop.

25 ● Third parties have infringed on our intellectual property rights, and may claim in the future that we are infringing their intellectual property rights, and we could suffer significant litigation or licensing expenses or be prevented from selling products.

●

We may not be able to successfully develop the BreathTest-1000 or any other new products or services.

●

Our sales and operations in international markets expose us to operational, financial and regulatory risks.

●

Our business, financial condition and results of operations may be adversely impacted by the effects of inflation.

●

We generate substantial revenue from a limited number of customers and the loss of any such customer may harm our business, results of operations and financial results.

●

Our success depends significantly on the establishment and maintenance of successful relationships with our customers.

●

Third parties may claim we are infringing their intellectual property rights, and we could suffer significant litigation or licensing expenses or be prevented from selling products.

●

Our ongoing success is dependent upon the continued availability of certain key employees.

●

Our operating results may be adversely affected by increased competition.

●

Our facilities located in Austin are susceptible to damage caused by hurricanes or other natural disasters.

●

If we are unable to anticipate technological advances and customer requirements in the commercial and governmental markets, our business and financial condition may be adversely affected.

●

We incur substantial upfront, non-reimbursable costs in preparing proposals to bid on contracts or to receive research and development grants that we may not be awarded.

●

A failure of a key information technology system, process, or site could have a material adverse impact on our ability to conduct business.

●

Our manufacturing operations are mostly dependent upon third party suppliers, including single source suppliers, making us vulnerable to external factors such as supply shortages and price fluctuations, which could harm our business.

●

Repair or replacement costs due to warranties we provide on our products could have a material adverse effect on our business, financial condition and results of operations.

●

Our products and operations are subject to extensive governmental regulation, and failure to comply with applicable requirements could cause our business to suffer.

●

Failure to obtain clearance or authorization for the BreathTest-1000, or other delays in the development of the BreathTest-1000, would adversely affect our ability to grow our business.

●

We and our suppliers may not meet regulatory quality standards applicable to our device-manufacturing processes, which could have an adverse effect on our business, financial condition, and results of operations.

●

If the BreathTest-1000 or any other device candidates are cleared for commercialization in the United States via the 510(k) process, product modifications may require new 510(k) clearances, de novo submissions, or pre‑market approvals, or may require us to cease marketing or recall the modified products until clearances are obtained.

●

Once our BreathTest-1000 or any other device candidate we may develop in the future, if any, is cleared or approved by FDA for marketing in the United States, if ever, we may be liable if the FDA or other U.S. enforcement agencies determine we have engaged in the off‑label promotion of such products or have disseminated false or misleading labeling or promotional materials.

●

Legislative or regulatory healthcare reforms may make it more difficult and costly for us to obtain reimbursement for our products or regulatory clearance or approval of our future products, if any, and to produce, market and distribute those products after clearance or approval is obtained.

●

Disruptions at FDA and other government agencies, such as those that may be caused by funding shortages, could hinder their ability to hire, retain or deploy key leadership and other personnel, or otherwise prevent new or modified products from being developed, approved, or commercialized in a timely manner or at all, which could negatively impact our business.

●

Our financial performance may be adversely affected by medical device tax provisions in healthcare reform laws.

●

Our AgLAB business’ growth is highly dependent on the U.S. hemp and cannabis market. New regulations causing licensing shortages and future regulations may create other limitations that decrease the demand for our products. General regulations at state and federal in the future may adversely impact our business.

●

As the possession and use of marijuana is illegal under the CSA, it is possible that our manufacture and sale of equipment that is used to cultivate marijuana or marijuana products may be deemed to be aiding and abetting illegal activities.

●

We may become subject to FDA or ATF regulation with respect to our AgLab business.

●

The hemp and cannabis industry could face strong opposition from other industries.

Table of Contents

RISK FACTORS

Risks Related to Our Business and Industry

We have incurred significant losses since inception and anticipate that we will incur continued losses for the foreseeable future.

As of June 30, ~~2024~~2025, we had an accumulated deficit of approximately $~~237~~ 251 million and reported a net loss of $1113.7 8 million for the fiscal year ~~2024~~2025. We are unable to predict the extent of any future losses or when we will become profitable, if at all. If we are unable to achieve and then maintain profitability, the market value of our common stock will likely experience significant decline.

Our business units are in the development stage. They have earned limited revenues and it is uncertain whether they will earn any revenues in the future or whether any of them will ultimately be profitable.

Our business units are in an early stage with a limited operating history. Their future operations are subject to all of the risks inherent in the establishment of a new business including, but not limited to, risks related to capital requirements, failure to establish business relationships, and competitive disadvantages against larger and more established companies. These business units will require substantial amounts of funding to continue to commercialize their products. If such funding comes in the form of equity financing, such equity financing may involve substantial dilution to existing shareholders. Even with funding, our products may fail to be effective or attractive to the market or lack the necessary financial or other resources or relationships to be successful.

These business units can be expected to experience continued operating losses until they can generate sufficient revenues to cover their operating costs. Furthermore, these business units may not be able to develop, manufacture, or market additional products in the future, and there can be no guarantee that future revenues will be significant, that any sales will be profitable, or that the business units will have sufficient funds available to complete their commercialization efforts. Any products and technologies developed and manufactured by our business units may require regulatory approvals prior to being made, marketed, sold, and used. Regulatory approval of any products may not be obtained. In particular, TSA approval is required to begin selling the TRACER 1000 in the United States and FDA clearance or approval is required to market the BreathTest-1000 in the United States. Obtaining approval from both TSA and FDA is a complex and lengthy process, and approvals for the TRACER 1000 and BreathTest-1000 may not be granted on a timely basis or at all, which would have a material adverse effect on our results of operations and financial condition.

We may need to raise additional capital to fund the operations of our business units and commercialize our products.

If our available cash resources and anticipated cash flows from operations are insufficient to satisfy our liquidity requirements, including because of lower demand for our products or the realization of other risks discussed in this Item1A. of this Form 10-K, we may be required to raise additional capital through issuances of equity or convertible debt securities, entrance into a credit facility or another form of third party funding or seek other debt financing. There is no assurance we will be able to obtain future financing on commercially reasonable terms, or at all. In any event, we may consider raising additional capital in the future to expand our business, to pursue strategic investments, to take advantage of financing opportunities or for other reasons, including to:

●

increase our sales and marketing efforts to drive market adoption of our products and address competitive developments;

●

fund development and marketing efforts of our existing products or any future products;

●

expand our technologies into additional markets;

●

acquire, license or invest in technologies and other intellectual property rights;

●

acquire or invest in complementary businesses or assets; and

●

finance capital expenditures and general and administrative expenses.

Our present and future funding requirements will depend on many factors, including:

●

our ability to achieve projected revenue growth;

● the cost of expanding our operations, including manufacturing and production capacity;

Table of Contents

●

our rate of progress in launching and commercializing new products, and the cost of the sales and marketing activities associated with increasing sales of our existing instruments and products;

●

our rate of progress in, and cost of research and development activities associated with, products in research and development;

●

the effect of competing technological and market developments;

●

the costs involved in preparing, filing, prosecuting, maintaining, defending and enforcing patent claims;

●

costs related to domestic and international expansion; and

●

the potential cost of and delays in product development as a result of any regulatory oversight that may be applicable to our products.

The various ways we could raise additional capital carry potential risks. If we raise funds by issuing equity securities, dilution to our stockholders could result. Any preferred equity securities issued also could provide for rights, preferences or privileges senior to those of holders of our common stock. If we raise funds by borrowing debt, such debt would have rights, preferences and privileges senior to those of holders of our common stock. The terms of such debt could impose significant restrictions on our operations. If we raise funds through collaborations or licensing arrangements, we might be required to relinquish significant rights to our platform technologies or products or grant licenses on terms that are not favorable to us or commit to future payment streams. Market volatility or other factors may further adversely impact our ability to raise capital as and when needed. If we are unable to obtain adequate financing or financing on terms satisfactory to us, if we require it, our ability to continue to pursue our business objectives and to respond to business opportunities, challenges, or unforeseen circumstances could be significantly limited, and could have a material adverse effect on our business, financial condition, results of operations and prospects.

We may not be able to obtain patents, other intellectual property protection or licenses for the technologies contained in the products we develop.

The commercial success of any of our business units will depend, in part, on obtaining patent and other intellectual property protection for the technologies contained in any products it developed. In addition, our business units may need to license intellectual property to commercialize future products or avoid infringement of the intellectual property rights of others. Licenses may not be available on acceptable terms and conditions, if at all. Our business units may suffer if any licenses terminate, if the licensors fail to abide by the terms of the license or fail to prevent infringement by third parties, if the licensed patents or other rights are found to be invalid, or if our respective business unit is unable to enter into necessary licenses on acceptable terms. If such business unit, or any third-party, from whom it licenses intellectual property, fails to obtain adequate patent or other intellectual property protection for intellectual property covering its products, or if any protection is reduced or eliminated, others could use the intellectual property covering the products, resulting in harm to the competitive business position of this business unit. In addition, patent and other intellectual property protection may not provide our business units with a competitive advantage against competitors that devise ways of making competitive products without infringing any patents that this business unit owns or has rights to. Such competition could adversely affect the prices for any products or the market share of any of our business units and could have a material adverse effect on its results of operations and financial condition.

~~Their parties may claim we are infringing their intellectual property rights, and we could suffer significant litigation or licensing expenses or be prevented from selling products.~~ 29

Third parties have infringed on our intellectual property rights, and may claim in the future that we are infringing on their intellectual property rights, and we could suffer significant litigation or licensing expenses or be prevented from selling products.

As we introduce any new and potentially promising product or service or improve existing products or services with new features or components, companies possessing competing technologies, or other companies owning patents or other intellectual property rights may be motivated to assert infringement claims in order to generate royalty revenues, delay or diminish potential sales, and challenge our right to market such products or services. Even if successful in defending against such claims, patent and other intellectual property related litigation is costly and time consuming. In addition, we may find it necessary to initiate litigation in order to protect our patent or other intellectual property right, and even if the claims are well-founded and ultimately successful, such litigation is typically costly and time-consuming and may expose us to counterclaims, including claims for intellectual property infringement, antitrust, or other such claims. Third parties could also obtain patents or other intellectual property rights that may require us to either redesign products or, if possible, negotiate licenses from such third parties. Adverse determinations in any such litigation could result in significant liabilities to third parties or injunctions, or could require us to seek licenses from third parties, and if such licenses are not available on commercially reasonable terms, prevent us from manufacturing, importing, distributing, selling, or using certain products, any one of which could have a material adverse effect on us. In addition, some licenses may be non-exclusive, which could provide our competitors access to the same technologies. Under any of the circumstances, we may incur significant expenses.

27 Around October 2024 we became aware of two third party companies advertising the TRACER 1000 for sale on their respective websites. Their websites used images of the TRACER 1000 that were copied from the 1st Detect website. The offering price was far below the price that we would quote to a potential customer, and these companies were not authorized distributors of our products. We are aware that these companies have confirmed to independent inquiries that they are authorized distributors or resellers of 1st Detect’s products. We have not granted licenses to these companies to distribute 1st Detect's products.

We engaged legal counsel to investigate the companies. One company subsequently responded to our investigation’s inquiries that they did not have the product in stock but would order it directly from the manufacturer. However, the second company confirmed to an anonymous inquiry that they have the product in stock, which we believe is misleading to customers.

In February 2025 demand letters were sent to both companies informing them that they were infringing on the EU registered copyrights of 1st Detect and TRACER 1000 and must remove the misleading information from their websites immediately. By July 10, 2025, all mentions of TRACER 1000 or 1st Detect and its products had been removed from both companies’ websites.

We have incurred costs with respect to such matters, including in the form of attorneys’ fees and costs. Other costs incurred, as a result of infringement claims like the ones discussed above, could include damages, fines or other penalties, whether pursuant to a judgment or settlement, and diversion of our management’s attention, which could adversely affect our business, financial condition or operating results.

Table of Contents

We may not be able to successfully develop the BreathTest-1000 or any other new products or services.

Our business strategy outlines the use of the decades of experience we have accumulated to expand the services and products we offer to both U.S. government agencies and commercial industries. These services and products are in the development stage and involve new and untested technologies and business models. These technologies and business models may not be successful, which could result in the loss of any investment we make in developing them, including the development of the BreathTest-1000.

Furthermore, we are subject to risks including, but not limited to, the following with respect to the development of the BreathTest-1000:

●

the governmental approval process could be lengthy, time consuming and is inherently unpredictable, and we cannot guarantee that the required approvals for our products, including FDA approvals, will be granted on a timely basis or at all or that we will ever have a marketable product;

● customers must be persuaded that using our products are effective alternatives to other existing detection methods available for ~~COVID-19 and other~~ infections in order for our products to be commercially successful;

●Medical-device ifdevelopment weinvolves ~~fail~~a tohigh ~~comply~~degree ~~with~~of ~~applicable~~risk ~~FDA~~and ~~regulations~~uncertainty, and our ~~premarket~~potential ~~submissions~~products ~~could~~may not be ~~adversely~~successfully ~~affected~~developed, ~~and~~achieve wetheir ~~could~~intended ~~face~~benefits, ~~substantial~~receive ~~enforcement~~full ~~actions~~market authorization, ~~including~~or ~~civil~~be commercially successful. Moreover, as the FDA and ~~criminal~~other ~~penalties~~U.S. regulatory agencies undergo changes in leadership and ~~our~~policy ~~business~~initiatives, ~~operations~~there ~~and~~are ~~financial~~higher ~~condition~~than ~~could~~normal beuncertainties ~~adversely~~in ~~affected~~developing and commercializing new products and services.

Medical-device development involves a high degree of risk and uncertainty, and our potential products may not be successfully developed, achieve their intended benefits, receive full market authorization, or be commercially successful. Moreover, as the COVID-19 pandemic persists and further information continues to develop, we are learning of increased risks and uncertainties in developing and commercializing new products and services in these unprecedented and evolving circumstances.

Our sales and operations in international markets expose us to operational, financial and regulatory risks.

International sales comprise a significant amount of our overall revenue and while growing our international sales is an important part of our growth strategy, these efforts may not be successful. International operations are subject to a number of other risks, including:

	●	import and export laws and the impact of tariffs;

	●	exchange rate fluctuations;

	●	political and economic instability, war, international terrorism and anti-American sentiment, particularly in emerging markets and the geographic regions affected by the Russia-Ukraine and Israel-Hamas wars;

	●	potential for violations of anti-corruption laws and regulations, such as those related to bribery and fraud;

	●	preference for locally branded products, and laws and business practices favoring local competition;

	●	increased risk in collecting trade receivables;

	●	potential for delayed revenue recognition;

	●	less effective protection and/or lack of enforceability of intellectual property;

	●	stringent foreign regulation, including but not limited to General Data Protection Regulation in the European Union, that are costly to comply with and may vary from country to country;

	●	changes in local tax and customs duty laws or changes in the enforcement, application or interpretation of such laws; and

	●	U.S. government’s restrictions on certain technology transfer to certain countries of concern.

The occurrence of any of these risks could negatively affect our international business and consequently our business, operating results, and financial condition.

28 31

Table of Contents

Our business, financial condition and results of operations may be adversely impacted by the effects of inflation.

Inflation has the potential to adversely affect our business, financial condition and results of operations by increasing our overall cost structure, particularly if we are unable to achieve commensurate increases in the prices we charge our customers. Other inflationary pressures could affect wages, the cost and availability of components, materials and other inputs and our ability to meet customer demand. Inflation may further exacerbate other risk factors, including supply chain disruptions, risks related to international operations and the recruitment and retention of qualified employees.

We generate substantial revenue from a limited number of customers and the loss of any such customer may harm our business, results of operations and financial results.

We ~~generate~~generated substantial revenue from ~~two~~ four customers, ~~who~~none ~~are affiliates~~ of ~~each other and neither of~~ which have a long-term contract with us. Given such high concentration of revenue on our consolidated results, our revenue may fluctuate significantly year over year based upon sales to either customer. In the event we are unable to obtain additional customers or increase our revenue from other customers to offset any reduction of these revenues, we could experience a material adverse effect on our business, financial condition and reported revenue and results of operation.

Our success depends significantly on the establishment and maintenance of successful relationships with our customers.

Our customer base is limited; therefore, we continue to work on diversifying our customer base, while going to great lengths to satisfy the needs of our current customer base. Due to the limited number of customers, if any of our customers terminate their relationship with us, it could materially harm our business and results of operations.

Third parties may claim we are infringing their intellectual property rights, and we could suffer significant litigation or licensing expenses or be prevented from selling products.

As we introduce any new and potentially promising product or service or improve existing products or services with new features or components, companies possessing competing technologies, or other companies owning patents or other intellectual property rights, may be motivated to assert infringement claims in order to generate royalty revenues, delay or diminish potential sales, and challenge our right to market such products or services. Even if successful in defending against such claims, patent and other intellectual property related litigation is costly and time consuming. In addition, we may find it necessary to initiate litigation in order to protect our patent or other intellectual property rights, and even if the claims are well-founded and ultimately successful, such litigation is typically costly and time-consuming and may expose us to counterclaims, including claims for intellectual property infringement, antitrust, or other such claims. Third parties could also obtain patents or other intellectual property rights that may require us to either redesign products or, if possible, negotiate licenses from such third parties. Adverse determinations in any such litigation could result in significant liabilities to third parties or injunctions, or could require us to seek licenses from third parties, and if such licenses are not available on commercially reasonable terms, prevent us from manufacturing, importing, distributing, selling, or using certain products, any one of which could have a material adverse effect on us. In addition, some licenses may be non-exclusive, which could provide our competitors access to the same technologies. Under any of these circumstances, we may incur significant expenses.

Our ongoing success is dependent upon the continued availability of certain key employees.

We are dependent in our operations on the continued availability of the services of our employees, many of whom are individually key to our current and future success, and the availability of new employees to implement our growth plans. The market for skilled employees is highly competitive, especially for employees in technical fields. While our compensation programs are intended to attract and retain the employees required for us to be successful, ultimately, we may not be able to retain the services of all of our key employees or a sufficient number to execute on our plans. In addition, we may not be able to continue to attract new employees as required.

Our operating results may be adversely affected by increased competition.

We generally sell our products in industries that have increased competition through frequent new product and service introductions, rapid technological changes, and changing industry standards. Without the timely introduction of new products, services, and enhancements, our products and services will become technologically obsolete over time, in which case our revenue and operating results would suffer. The success of our new products and services will depend on several factors, including our ability to:

•

properly identify customer needs and predict future needs;

•

innovate and develop new technologies, services, and applications;

29 32

Table of Contents

•

successfully commercialize new technologies in a timely manner;

•

manufacture and deliver our products in sufficient volumes and on time;

•

differentiate our offering from our competitors’ offerings;

•

price our products competitively;

•

anticipate our competitors’ development of new products, services, or technological innovations; and

•

control product quantity in our manufacturing process.

Our facilities located in Austin are susceptible to damage caused by hurricanes or other natural disasters.

Our ATI facilities in Austin are susceptible to damage caused by hurricanes or other natural disasters. Although we insure our properties and maintain business interruption insurance, there can be no guarantee that the coverage would be sufficient or a claim will be fulfilled. A natural disaster could result in a temporary or permanent closure of some of our business operations, thus impacting our future financial performance.

If we are unable to anticipate technological advances and customer requirements in the commercial and governmental markets, our business and financial condition may be adversely affected.

Our business strategy employs our personnel’s decades of experience to expand the services and products we offer to our customers. We believe that our growth and future financial performance depend upon our ability to anticipate technological advances and customer requirements. We may not be able to achieve the necessary technological advances for us to remain competitive. Our failure to anticipate or respond adequately to changes in technological and market requirements, or delays in additional product development or introduction, could have a material adverse effect on our business and financial performance. Additionally, the cost of capital to fund these businesses will likely require dilution of shareholders.

We incur substantial upfront, non-reimbursable costs in preparing proposals to bid on contracts or to receive research and development grants that we may not be awarded.

Preparing a proposal to bid on a contract or to receive a research and development grant is labor-intensive and results in the incurrence of substantial costs that are generally not retrievable. Additionally, although we may be awarded a contract or grant, work performance does not commence for several months following completion of the bidding process. If funding problems by the party awarding the contract or grant or other matters further delay our commencement of work, these delays may lower the value of the contract or grant, or possibly render it unprofitable.

A failure of a key information technology system, process, or site could have a material adverse impact on our ability to conduct business.

We rely extensively on information technology systems to interact with our employees, suppliers, and our customers. These interactions include, but are not limited to, ordering and managing materials from suppliers, converting materials to finished products, shipping product to customers, processing transactions, summarizing and reporting results of operations, transmitting data used by our service personnel and by and among our personnel and facilities, complying with regulatory, legal, and tax requirements, and other processes necessary to manage our business. If our systems are damaged or cease to function properly due to any number of causes, ranging from the failures of third-party service providers, to catastrophic events, to power outages, to security breaches, and our business continuity plans do not effectively compensate on a timely basis, we may suffer interruptions in our ability to manage operations which may adversely impact our results of operations and/or financial condition.

30 33

Table of Contents

We are subject to the risks inherent in the manufacturing of our products, including industrial accidents, environmental events, strikes and other labor disputes, capacity constraints, as well as global shortages, disruptions in supply chain and loss or impairment of key suppliers, as well as natural disasters and other external factors over which we have no control. Our products contain several critical components, including certain electrical components such as specialized cables and specialized pumps, which are primarily manufactured by third parties. Some of the suppliers of critical components or materials are single source suppliers. Although we believe there are suitable alternative suppliers for these components, the replacement of existing suppliers or the identification and qualification of suitable second sources may require significant time, effort and expense, and could result in delays in production, which could negatively impact our business operations and revenue. We do not have supply agreements with certain suppliers of these critical components and materials beyond purchase orders and, although we maintain a safety stock inventory for certain critical components, forecasted amounts may be inaccurate and we may experience shortages as a result of serious supply problems with these suppliers. ~~There~~ While we also manufacture some of our products in-house to maintain greater control over quality and timeliness of those products, there can be no assurance that our supply of these other components will not be limited, interrupted, or of satisfactory quality or continue to be available at acceptable prices. In addition, loss of any critical component provided by a single source supplier could require us to change the design of our manufacturing process based on the functions, limitations, features and specifications of the replacement components.

In addition, several other non-critical components and materials that comprise our products are currently manufactured by a single supplier or a limited number of suppliers. In certain of these cases, we have not yet qualified alternate suppliers. A supply interruption or an increase in demand beyond our current suppliers’ capabilities could harm our ability to manufacture our products unless and until new sources of supply are identified and qualified. Our reliance on these suppliers subjects us to a number of risks that could harm our business, including:

●

interruption of supply resulting from modifications to or discontinuation of a supplier’s operations;

●

trade disputes or other political conditions or economic conditions;

●

delays in the manufacturing operations of our suppliers, or in the delivery of parts and components to support such manufacturing operations, due to the impact of public health issues, endemics or pandemics, such as COVID-19;

●

delays in product shipments resulting from uncorrected defects, reliability issues, or a supplier’s variation in a component;

●

a lack of long-term supply arrangements for key components with our suppliers;

●

inability to obtain adequate supply in a timely manner, or to obtain adequate supply on commercially reasonable terms;

●

difficulty and cost associated with locating and qualifying alternative suppliers for our components in a timely manner;

●

a modification or change in a manufacturing process or part that unknowingly or unintentionally negatively impacts the operation of our platform;

●

production delays related to the evaluation and testing of products from alternative suppliers, and corresponding regulatory qualifications;

●

delay in delivery due to our suppliers prioritizing other customer orders over ours;

●

damage to our brand reputation caused by defective components produced by our suppliers;

●

increased cost of our warranty program due to product repair or replacement based upon defects in components produced by our suppliers; and

●

fluctuation in delivery by our suppliers due to changes in demand from us or their other customers.

Any interruption in the supply of components or materials, or our inability to obtain substitute components or materials from alternate sources at acceptable prices in a timely manner, could result in increased costs and impair our ability to meet the demand of our customers, any of which would have an adverse effect on our business, financial condition, results of operations and prospects.

31 34

Table of Contents

Repair or replacement costs due to warranties we provide on our products could have a material adverse effect on our business, financial condition and results of operations.

We provide our customers with warranties on the products we sell. These warranties typically provide for repairs and maintenance of the products if problems arise during a specified time period after original shipment. Existing and future warranties place us at the risk of incurring future repair and/or replacement costs. Concurrent with the sale of products, we record a provision for estimated warranty expenses with a corresponding increase in the cost of goods sold. We periodically adjust this provision based on historical experience and anticipated expenses. We charge actual expenses of repairs under warranty, including shipping, labor and parts, to this provision when incurred. We exercise judgment in estimating the expected product warranty costs, using data such as the actual and projected product failure rates, estimated repair costs, freight, material, labor and overhead costs. While we believe that historical experience provides a reliable basis for estimating such warranty cost, unforeseen quality issues or component failure rates as well as significantly higher sales and the introduction of new products could result in future costs in excess of such estimates, or alternatively, improved quality and reliability in our products could result in actual expenses that are below those currently estimated. As of June 30, ~~2024,~~ 2025 and ~~2023~~2024, we had accrued a balance of $~~184~~197 thousand and $88 184 thousand, respectively relating to product warranty provision, representing a surplus of estimated warranty expenses over actual expenses for the fiscal years. Substantial amounts of warranty claims could have a material adverse effect on our business, financial condition and results of operations.

Legal and Regulatory Risks

Our products and operations are subject to extensive governmental regulation, and failure to comply with applicable requirements could cause our business to suffer.

The medical technology industry is regulated extensively by governmental authorities, principally the FDA, and state regulatory agencies with oversight of various aspects of drug and device distribution, sale, and use. The regulations are very complex, have become more stringent over time, and are subject to rapid change and varying interpretations. Regulatory restrictions or changes could limit our ability to carry on or expand our operations or result in higher than anticipated costs or lower than anticipated sales. The FDA and other federal and state governmental agencies regulate numerous elements of our business, including:

●

product design and development;

●

pre‑clinical and clinical testing and trials;

●

product safety;

●

establishment registration and product listing;

●

labeling and storage;

●

marketing, manufacturing, sales and distribution;

●

pre‑market clearance or approval;

●

servicing and post‑marketing surveillance, including reporting of deaths or serious injuries and malfunctions that, if they recurred, could lead to death or serious injury;

●

advertising and promotion;

●

post‑market approval studies;

●

product import and export; and

●

recalls and field‑safety corrective actions.

32 35

Table of Contents

Before we can market or sell a new medical device, such as the BreathTest-1000, in the United States, we must obtain either clearance under Section 510(k) of the FDCA, grant of a de novo classification request, or approval of a pre‑market approval, or PMA, application from the FDA. In the 510(k) clearance process, the FDA must determine that a proposed device is “substantially equivalent” to a legally marketed “predicate” device (in most cases Class II devices, with a few exceptions), with respect to intended use, technology and safety and effectiveness, in order to clear the proposed device for marketing. Class III devices approved under the PMA process cannot serve as predicates. Clinical data are sometimes required to support substantial equivalence. In the de novo process, the FDA must determine that general and special controls are sufficient to provide reasonable assurance of the safety and effectiveness of a device, which is low to moderate risk and has no predicate (in other words, the applicant must justify the “down-classification” to Class I or II for a new product type that would otherwise automatically be placed into Class III, but is lower risk). The PMA process requires an applicant to demonstrate the safety and effectiveness of the device based on extensive data, including, but not limited to, technical, preclinical, clinical trial, manufacturing and labeling data. The PMA process is typically required for devices that are deemed to pose the greatest risk, such as life‑sustaining, life‑supporting or implantable devices. Products that are approved through a PMA application generally need FDA approval before they can be modified. Similarly, some modifications made to products cleared through a 510(k) may require a new 510(k). The 510(k), de novo, and PMA processes can be expensive and lengthy and require the payment of significant fees, unless an exemption applies. The FDA’s 510(k) clearance process usually takes from 3 to 12 months, but may take longer. The FDA’s stated goal is to review de novo classification requests within 150 days, 50% of the time, but in reality the process for many applicants generally takes even longer, up to a year or more. The process of obtaining a PMA is much costlier, rigorous, and difficult than the 510(k) clearance process and generally takes from one to three years, or longer, from the time the application is submitted to the FDA until an approval is obtained. The process of obtaining regulatory clearances, or approvals, ~~and emergency use authorization~~ to market a medical device can be costly and time‑consuming, and we may not be able to obtain these clearances, approvals, or authorizations on a timely basis, or at all for our proposed products.

Our BreathTest-1000 product candidate may undergo FDA premarket review via the 510(k) process. If the FDA requires us to go through a lengthier, more rigorous examination for marketing authorization of the BreathTest-1000 or future modifications to the BreathTest-1000, if cleared by the FDA, than we had expected, our commercialization plans could be delayed or canceled, which could cause our sales to decline or to not increase in line with our forecasts. In addition, the FDA may determine that future products, as applicable, will require the costlier, lengthy and uncertain PMA process. Although we do not currently intend to develop or market any devices under a PMA, the FDA may demand that we obtain a PMA prior to marketing certain of our future product candidates, if applicable. Further, even where a PMA is not required, we cannot assure you that we will be able to obtain any 510(k) clearances with respect to the BreathTest-1000 or other future product candidates that we may develop, if any.

The FDA can delay, limit or deny clearance, approval, or authorization of a device for many reasons, including:

●

we may not be able to demonstrate to the FDA’s satisfaction that our products meet the definition of “substantial equivalence” or meet the standard for the FDA to grant a petition for de novo classification;

●

we may not be able to demonstrate that our products are safe and effective for their intended uses;

●

the data from our pre-clinical studies (bench and/or animal) and/or clinical trials may be insufficient to support clearance, approval, or authorization; and

●

the manufacturing process or facilities we use may not meet applicable requirements.

In addition, the FDA may change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions which may prevent or delay approval or clearance of our products under development. Any delay in, or failure to obtain or maintain, clearance or approval for our products under development could prevent us from generating revenue from these products and adversely affect our business operations and financial results. Additionally, the FDA and other regulatory authorities have broad enforcement powers. Regulatory enforcement or inquiries, or other increased scrutiny on us, could dissuade some customers from using our products and adversely affect our reputation and the perceived safety and efficacy of our product. Failure to comply with applicable regulations could jeopardize our ability to sell our products and result in enforcement actions such as fines, civil penalties, injunctions, warning letters, recalls of products, delays in the introduction of products into the market, refusal of the FDA or other regulators to grant future clearances or approvals, and the suspension or withdrawal of existing clearances or approvals by the FDA or other regulators. Any of these sanctions could result in higher than anticipated costs or lower than anticipated sales and negatively impact our reputation, business, financial condition and operating results. Furthermore, any operations or product applications outside of the United States will subject us to various additional regulatory and legal requirements under the applicable laws and regulations of the international markets we enter. These additional regulatory requirements may involve significant costs and expenditures and, if we are not able to comply with any such requirements, our international expansion and business could be significantly harmed.

33 36

Table of Contents

Failure to obtain clearance or authorization for the BreathTest-1000, or other delays in the development of the BreathTest-1000, would adversely affect our ability to grow our business.

Commercialization of the BreathTest-1000 may require FDA clearance of a 510(k) premarket notification submission and/or authorization of a de novo submission. The process for submitting and obtaining FDA clearance of a 510(k) or authorization of a de novo submission, can be expensive and lengthy. The FDA’s review process can take several months or longer, and we may not be able to obtain FDA clearance or de novo authorization for the BreathTest-1000 on a timely basis, if at all. The FDA’s refusal of, or any significant delays in receiving, 510(k) clearance or de novo authorization of the BreathTest-1000, would have an adverse effect on our ability to expand our business. Thus far, we have not performed any clinical testing of the BreathTest-1000, which will likely be required before the device can be marketed. Even if a clinical trial is completed, there can be no assurance that the data generated during a clinical trial will meet the safety and effectiveness endpoints or otherwise produce results that will lead the FDA to grant marketing clearance, approval, or authorization. In addition, any other delays in the development of the BreathTest-1000, for example, unforeseen issues during product validation, would have an adverse effect on our ability to commercialize the BreathTest-1000.

As a prospective medical device manufacturer, if BreathTest-1000 or any other device(s) we may successfully develop in the future is approved or cleared for commercialization in the United States, we will need to register with the FDA and will be subject to periodic inspection by the FDA for compliance with the QSR, including requirements pertaining to design controls, product validation and verification, in-process testing, quality control and documentation procedures, labeling, among numerous others. Compliance with applicable regulatory requirements is subject to continual review and is rigorously monitored through routine and unannounced inspections by the FDA. Any product and component suppliers we may engage in connection with the manufacture and/or distribution of any medical device(s) for which we obtain FDA clearance or approval, if any, will also be required to meet certain standards applicable to their manufacturing processes, and we may be held responsible for any failure to do so by any such suppliers or vendors.

We cannot assure you that we or our current or future suppliers or vendors will comply with all regulatory requirements. The failure by us or one of our suppliers to achieve or maintain compliance with these requirements or quality standards may disrupt our ability to supply products sufficient to meet demand until compliance is achieved or, until a new supplier has been identified and evaluated. Our failure, or any product or component supplier’s failure, to comply with applicable regulations could result in a wide range of FDA enforcement actions against us, including warning letters, fines, recalls, injunctions, civil penalties, adverse action against marketing applications, product seizure or detention, operating restrictions, and criminal prosecution, any of which could harm our business.

If the BreathTest-1000 or any other device candidates are cleared for commercialization in the United States via the 510(k) process, product modifications may require new 510(k) clearances, de novo submissions, or pre‑market approvals, or may require us to cease marketing or recall the modified products until clearances are obtained.

Any modification to any 510(k)‑cleared device that we may market in the future, including the BreathTest-1000 if we are able to complete development and obtain FDA clearance for any indication(s) for use, as applicable, could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, design, or manufacture, requires a new 510(k) clearance or, possibly, a de novo or PMA. The FDA requires every manufacturer to make this determination in the first instance, and provides some guidance on decision making, but the FDA may review any manufacturer’s decision at any time. The FDA may not agree with our decisions regarding whether new clearances or approvals are necessary. If the FDA disagrees with our determination and requires us to submit new 510(k) notifications, de novo submissions or PMAs for modifications to our previously cleared or approved products for which we have concluded that new clearances or approvals are unnecessary, we may be required to cease marketing or to recall the modified product until we obtain clearance or approval, and we may be subject to significant regulatory fines or penalties.

34 37

Table of Contents

Once our BreathTest-1000 or any other device candidate we may develop in the future, if any, is cleared or approved by FDA for marketing in the United States, if ever, we may be liable if the FDA or other U.S. enforcement agencies determine we have engaged in the off‑label promotion of such products or have disseminated false or misleading labeling or promotional materials.

If the BreathTest-1000 or any other device candidate we may successfully develop and commercialize in the future, if any, is approved or cleared by FDA for marketing in the United States, the promotional materials, labeling, and related training methods must comply with applicable regulations prohibiting promotional communications that are inconsistent with the approved or cleared marketing submission(s) for the applicable product(s), or “off‑label” promotion, as well as any false or misleading statements, among various other types of promotional claims, depending on the circumstances, content, audience, and other factors. For example, the FDA and/or FTC could conclude that a performance claim about a medical device is misleading if it determines that there is inadequate substantiation for the claim. If the FDA determines that future promotional materials or training promote an off‑label use or make false or misleading claims about our commercial device(s), if any, it could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions, including the issuance of an untitled letter, a warning letter, injunction, seizure, civil fines and criminal penalties. It is also possible that other federal, state or foreign enforcement authorities might take action if they determine that our promotional or training materials promote an unapproved use or make false or misleading claims, which could result in significant fines or penalties. Violations of the FDCA may also lead to investigations alleging violations of federal and state health care fraud and abuse laws, as well as state consumer protection laws, which may lead to costly penalties and may adversely impact our business. Recent court decisions have impacted FDA’s enforcement activity regarding off-label promotion in light of First Amendment Considerations; however, there are still significant risks in this area, in part due to the potential for False Claims Act exposure. In addition, the off‑label use of our products may increase the risk of product liability claims. Product liability claims are expensive to defend and could result in substantial damage awards against us and harm our reputation. Similarly, until we have one or more commercially available, FDA-cleared or approved devices in the United States, if ever, we are prohibited from promoting or marketing the BreathTest-1000 for any indication(s) for use or any other investigational devices. We could be subject to the same wide range of enforcement actions described above if we are found in violation of FDA’s prohibition on pre-approval promotion of an investigational device.

Recent political, economic and regulatory influences are subjecting the healthcare industry to fundamental changes. Both the federal and state governments in the United States and foreign governments continue to propose and pass new legislation and regulations designed to contain or reduce the cost of healthcare. Such legislation and regulations may result in decreased reimbursement for our product, which may further exacerbate industry‑wide pressure to reduce the prices charged for our product. This could harm our ability to market our products and generate sales. In addition, FDA regulations and guidance are often revised or reinterpreted by the FDA in ways that may significantly affect our business and our current products and future products. Any new regulations or revisions or reinterpretations of existing regulations may impose additional costs or lengthen review times of our products. Delays in receipt of or failure to receive regulatory clearances or approvals for any future products would negatively impact our long‑term business strategy.

In the U.S., there have been a number of legislative and regulatory changes and proposed changes regarding the healthcare system that restrict or regulate post‑approval activities, which may affect our ability to profitably sell product candidates for which we obtain marketing approval, if any. Such government‑adopted reform measures may adversely impact the pricing of healthcare products and services in the United States or internationally and the amount of reimbursement available from third‑party payors.

35 38

~~Table~~Disruptions ofat ~~Contents~~ FDA and other government agencies, such as those that may be caused by funding shortages, could hinder their ability to hire, retain or deploy key leadership and other personnel, or otherwise prevent new or modified products from being developed, approved, or commercialized in a timely manner or at all, which could negatively impact our business.

The ability of FDA to review and approve new products can be affected by a variety of factors, including government budget and funding levels, statutory, regulatory, and policy changes, FDA’s ability to hire and retain key personnel and accept the payment of user fees, and other events that may otherwise affect FDA’s ability to perform routine functions. Average review times at the agency have fluctuated in recent years as a result. Disruptions at FDA and other agencies may also increase the time necessary to meet with and provide feedback to entities developing drug products, review and/or approve our submissions, conduct inspections, issue regulatory guidance, or otherwise authorize our actions requiring regulatory approval, which would adversely affect our business. In addition, government funding of FDA and other government agencies on which our operations may rely, including those that fund research and development activities, is subject to the political process, which is inherently fluid and unpredictable. For example, the executive branch recently established the Department of Government Efficiency (“DOGE”), which implemented a federal government hiring freeze and large scale layoffs of current federal employees and also announced additional efforts to reduce federal government employee headcount and the size of the federal government. It is unclear how these executive actions or other potential actions by the executive branch will impact the regulatory authorities that oversee our business. These budgetary pressures may reduce FDA’s ability to perform its responsibilities. If a significant reduction in FDA’s workforce occurs, FDA’s budget is significantly reduced, or there are other disruptions at FDA and other agencies, more time may be necessary for biological products, or biologics, or modifications to approved biologics to be reviewed and/or approved by necessary government agencies, which could increase our costs and would adversely affect our business.

Our financial performance may be adversely affected by medical device tax provisions in healthcare reform laws.

The Patient Protection and Affordable Care Act (the “PPACA”) imposed, among other things, an excise tax of 2.3% on any entity that manufactures or imports medical devices offered for sale in the United States. Under these provisions, the Congressional Research Service predicted that the total cost to the medical device industry may be up to $20 billion over a decade. The Internal Revenue Service issued final regulations implementing the tax in December 2012, which required, among other things, bi-monthly payments and quarterly reporting. The Consolidated Appropriations Act, 2016 (Pub. L. 114-113), signed into law in December 2015, included a two-year moratorium on the medical device excise tax. A second two-year moratorium on the medical device excise tax was signed into law in January 2018 as part of the Extension of Continuing Appropriations Act, 2018 (Pub. L. 115-120), extending the moratorium through December 31, 2019. On December 20, 2019, as part of the Further Consolidated Appropriations Act, 2020 H.R. 1865 (Pub. L. 116-94), President Trump signed into law a permanent repeal of the medical device tax under the PPACA such that sales of taxable medical devices after December 31, 2015 are not subject to the tax; however, there is no guarantee that Congress or the President will not reverse course in the future. If such an excise tax on sales of our products in the United States is enacted, it could have a material adverse effect on our business, results of operations and financial condition.

Our AgLAB business’ growth is highly dependent on the U.S. hemp and cannabis market. New regulations causing licensing shortages and future regulations may create other limitations that decrease the demand for our products. General regulations at state and federal in the future may adversely impact our business.

Although we do not grow, sell or distribute cannabis products, our products are closely tied to the hemp and cannabis industry and could subject us to regulatory, financial, operational and reputational risks and challenges.

The base of cannabis growers in the U.S. has grown over the last few decades since the legalization of cannabis for medical uses in states such as California, Colorado and Washington. The U.S. cannabis market is still in its infancy and early adopter states such as California, Colorado and Washington represent a large portion of historical industry revenues. The U.S. cannabis cultivation market is expected to be one of the fastest growing industries in the U.S. over the coming years. If the U.S. cannabis cultivation market does not grow as expected, our business, financial condition and results of operations could be impacted. The California cannabis cultivation market is expected to be one of the fastest growing industries in California over the coming years. If the California cannabis cultivation market does not grow as expected, our business, financial condition and results of operations could be impacted.

Marijuana remains illegal under U.S. federal law, as it is listed as a Schedule I substance under the United States Controlled Substances Act of 1970 (the “CSA”). Notwithstanding laws in various states permitting certain cannabis activities, all cannabis activities, including possession, distribution, processing and manufacturing of cannabis in violation of federal law and investment in, and financial services or transactions involving proceeds of, or promoting such activities remain illegal under various U.S. federal criminal and civil laws and regulations, including the CSA, as well as laws and regulations of several states that have not legalized some or any cannabis activities to date. Compliance with applicable state laws regarding cannabis activities does not protect us from federal prosecution or other enforcement action, such as seizure or forfeiture remedies, nor does it provide any defense to such prosecution or action. Cannabis activities conducted in or related to conduct in multiple states may potentially face a higher level of scrutiny from federal authorities. Penalties for violating federal drug, conspiracy, aiding, abetting, bank fraud and/or money laundering laws may include prison, fines, and seizure/forfeiture of property used in connection with cannabis activities, including proceeds derived from such activities.

Legislation and regulations pertaining to the use and cultivation of hemp and cannabis are enacted on both the state and federal government level within the United States. As a result, the laws governing the cultivation and use of hemp and cannabis may be subject to change. Any new laws and regulations limiting the use or cultivation of hemp and cannabis and any enforcement actions by state and federal governments could indirectly reduce demand for our products and may impact our current and planned future operations. There can be no assurance that changes in regulation of the industry and more rigorous enforcement by federal authorities will have a detrimental effect on us.

Evolving federal and state laws and regulations pertaining to the use or cultivation of hemp and cannabis, as well active enforcement by federal or state authorities of the laws and regulations governing the use and cultivation of hemp and cannabis may indirectly affect our business, our revenues and our profits.

Table of Contents

The public’s perception of hemp and cannabis may significantly impact the cannabis industry’s success. Both the medical and adult-use of hemp and cannabis are controversial topics, and there is no guarantee that future scientific research, publicity, regulations, medical opinion, and public opinion relating to cannabis will be favorable. The hemp and cannabis industry is an early-stage business that is constantly evolving with no guarantee of viability. Among other things, such a shift in public opinion could cause state jurisdictions to abandon initiatives or proposals to legalize cultivation and sale of cannabis or adopt new laws or regulations restricting or prohibiting the cultivation of hemp and cannabis where it is now legal, thereby limiting the potential customers who are engaged in the hemp and cannabis industry.

Demand for our products may be negatively impacted depending on how laws, regulations, administrative practices, enforcement approaches, judicial interpretations, and consumer perceptions develop. We cannot predict the nature of such developments or the effect, if any, that such developments could have on our business.

Federal practices could change with respect to providers of equipment potentially usable by cultivators in the medical and recreational cannabis industry, which could adversely impact us. Cannabis growers use equipment that we offer for sale. While we are not aware of any threatened or current federal or state law enforcement actions against any supplier of equipment that might be used for cannabis growing, law enforcement authorities, in their attempt to regulate the illegal use of cannabis, may seek to bring an action or actions against us, including but not limited to a claim of aiding and abetting, or being an accessory to, another’s criminal activities or that our products are considered “drug paraphernalia.”

The federal aiding and abetting statute, U.S. Code Title 18 Section 2(a), provides that anyone who “commits an offense against the United States or aids, abets, counsels, commands, induces or procures its commission, is punishable as a principal.” Under U.S. Code Title 21 Section 863, the term “drug paraphernalia” means “any equipment, product or material of any kind which is primarily intended or designed for use in manufacturing, compounding, converting, concealing, producing, processing, preparing, injecting, ingesting, inhaling, or otherwise introducing into the human body a controlled substance.” Any drug paraphernalia involved in any violation of Section 863 shall be subject to seizure and forfeiture upon the conviction of a person for such violation. While Section 863(f) contains an exemption for any person authorized by local, state or federal law to manufacture, possess, or distribute such items, any such action may force us to cease operations and our investors could lose value associated with their investment.

A risk exists that our activities could be deemed to be facilitating the selling or distribution of cannabis in violation of the CSA, or to constitute aiding or abetting, or being an accessory to, a violation of the CSA. There is also a risk that our products could be considered drug paraphernalia and could be subject to seizure. We believe, however, that such risks are relatively low. Federal authorities have not focused their resources on such tangential or secondary violations of the CSA, nor have they threatened to do so, with respect to the sale of equipment that might be used by cannabis cultivators, or with respect to any supplies marketed to participants in the medical and recreational cannabis industry. We are unaware of such a broad application of the CSA or the seizure of drug paraphernalia by federal authorities, and we believe that such an attempted application would be uncustomary.

If the federal government were to change its practices or were to expend its resources investigating and prosecuting providers of equipment that could be usable by participants in the medical or recreational cannabis industry, such action could have a materially adverse effect on our operations, our customers, or the sales of our products. As a result of such an action, we may be forced to cease operations within the cannabis industry and our investors could lose value associated with their investment.

We may become subject to FDA or ATF regulation with respect to our AgLab business.

Marijuana remains a Schedule I controlled substance under U.S. federal law. If the federal government reclassifies marijuana to a Schedule II, Schedule III, Schedule IV, or Schedule V controlled substance or declassifies it as a controlled substance, it is possible that the FDA would seek to regulate cannabis under the FDCA. The FDA is responsible for ensuring public health and safety through regulation of food, drugs, supplements, and cosmetics, among other products, through its enforcement authority pursuant to the FDCA. The FDA’s responsibilities include regulating the ingredients as well as the marketing and labeling of drugs sold in interstate commerce. Because marijuana is federally illegal to produce and sell, and because it has few federally recognized medical uses, the FDA has historically deferred enforcement related to cannabis to the DEA; however, the FDA has enforced the FDCA with regard to hemp-derived products, especially CBD derived from hemp. The FDA has consistently asserted its authority to regulate CBD derived from hemp and currently prohibits the introduction or delivery for introduction into interstate commerce of any ingestible product (intended for human consumption) containing CBD, though, notably, to-date, its enforcement efforts in this area have been limited to products making therapeutic claims to treat, prevent, and/or mitigate one or more conditions or diseases. On January 26, 2023, the FDA reiterated its longstanding position (since the passage of the 2018 Farm Bill), announcing that, despite much speculation to the contrary, it would not seek to regulate CBD as a lawful dietary supplement.

Table of Contents

If FDA changes its current position in the future or if Congress enacts new legislation under which FDA is expressly authorized and directed to do so, the FDA may issue rules and regulations, including good manufacturing practices related to the growth, cultivation, harvesting, processing, and production of hemp products. Clinical trials may be needed to verify the efficacy and safety of such products. It is also possible that the FDA would require facilities where medical-use cannabis is grown to register with the FDA and comply with certain federally prescribed regulations. If some or all these regulations are imposed, the impact they would have on the hemp and cannabis industry is unknown, including the costs, requirements and possible prohibitions that may be enforced. If we are unable to comply with the potential regulations or registration requirements prescribed by the FDA, it may have a detrimental effect on our business, prospects, revenue, results of operation and financial condition.

It is also possible that the federal government could seek to regulate cannabis under the U.S. Bureau of Alcohol, Tobacco, Firearms and Explosives (“ATF”). The ATF may issue rules and regulations related to the use, transport, sale and advertising of cannabis or cannabis products.

The hemp and cannabis industry could face strong opposition from other industries.

We believe that established businesses in other industries may have a strong economic interest in opposing the development of the hemp and cannabis industry. Hemp and cannabis may be seen by companies in other industries as an attractive alternative to their products, including recreational marijuana as an alternative to alcohol, and medical marijuana as an alternative to various commercial pharmaceuticals. Many industries that could view the emerging hemp and cannabis industry as an economic threat are well established, with vast economic and United States federal and state lobbying resources. It is possible that companies within these industries could use their resources to attempt to slow or reverse legislation legalizing cannabis. Any inroads these companies make in halting or impeding legislative initiatives that would be beneficial to the hemp and cannabis industry could have a detrimental impact on our clients and, in turn on our operations.

There may be difficulty enforcing certain of our commercial agreements and contracts.

Courts will not enforce a contract deemed to involve a violation of law or public policy. Because marijuana remains illegal under U.S. federal law, parties to contracts involving the state legal cannabis industry have argued that the agreement was void as federally illegal or against public policy. Some courts have accepted this argument in certain cases, usually against the company trafficking in cannabis. While courts have enforced contracts related to activities by state-legal cannabis companies, and the trend is generally to enforce contracts with state-legal cannabis companies and their vendors, there remains doubt and uncertainty that we will be able to enforce our commercial agreements with cannabis industry participants in court for this reason. We cannot be assured that we will have a remedy for breach of contract in such cases, which would have a detrimental impact on our business.

A drop in the retail price of hemp and cannabis products may negatively impact our business.

The fluctuations in economic and market conditions that impact the prices of commercially grown hemp and cannabis, such as increases in the supply of hemp and cannabis and decreases in demand for hemp and cannabis, could have a negative impact on our clients that are hemp and cannabis producers, and therefore could negatively impact our business.

We may be subject to constraints on and differences in marketing our products under varying state laws.

There are and may continue to be restrictions on sales and marketing activities imposed by government regulatory bodies that could hinder the development of our business and operating results. Restrictions may include regulations that specify what, where and to whom product information and descriptions may appear and/or be advertised. Marketing, advertising, packaging, and labeling regulations also vary from state to state, potentially limiting the consistency and scale of consumer branding communication and product education efforts. The regulatory environment in the U.S. limits our ability to compete for market share in a manner similar to other industries. If we are unable to effectively market our products and compete for market share, or if the costs of compliance with government legislation and regulation cannot be absorbed through increased selling prices for our products, our sales and operating results could be materially, adversely affected.

Table of Contents

We are subject to differing tax rates in several jurisdictions in which we operate, which may adversely affect our business, financial condition, results of operations and prospects.

We are subject to taxes in the United States and certain foreign jurisdictions. Due to economic and political conditions, tax rates in various jurisdictions, including the United States, may be subject to change. Our future effective tax rates could be affected by changes in the mix of earnings in countries with differing statutory tax rates, changes in the valuation of deferred tax assets and liabilities and changes in tax laws or their interpretation. In addition, we may be subject to income tax audits by federal, state and local tax authorities in the United States and tax authorities outside the United States. Although we believe our income tax liabilities are reasonably estimated and accounted for in accordance with applicable laws and principles, an adverse resolution by one or more taxing authorities could have a material impact on the results of our operations.

Changes in U.S. trade policy, including changes to existing trade agreements and any resulting changes in international trade relations, may have a material adverse effect on us and our export compliance as it relates to our international customers.

The ~~change~~recent changes in ~~U.S. presidential administrations may alter~~ the U.S.’s approach to international trade, ~~which~~ may impact existing bilateral or multi-lateral trade agreements and treaties with foreign countries. The U.S. has imposed tariffs on certain foreign goods and may increase tariffs or impose new ones, and certain foreign governments have retaliated and may continue to do so. For example, the President of the United States signed executive orders directing the U.S. to impose tariffs on goods originating from Canada, Mexico and China. In response, some of these countries threatened or announced tariffs on imports from the U.S. To date, Canada and the U.S. agreed to delay the imposition of certain tariffs on imported goods but the situation remains temporary and uncertain. Furthermore, on July 28, 2025, the U.S. announced that they have reached a preliminary trade deal with the European Union, which among other things, sets a 15% percent tariff on most European Union goods. These developments are ongoing and are subject to change, including the imposition of additional tariffs and retaliatory measures by these and other countries. We derive a significant portion of our revenues from international sales, which makes us especially vulnerable to increased tariffs. Additionally, the implementation of these or other tariffs may lead to increased costs for our product components, which could impact our ability to maintain competitive pricing in the market. Changes in U.S. trade policy have created ongoing turmoil in international trade relations, and it is unclear what future actions the U.S. government or foreign governments will or will not take with respect to tariffs or other international trade agreements and policies. Current trade negotiations may fail, which may exacerbate these risks. Ongoing or new trade wars or other governmental action related to tariffs or international trade agreements or policies could reduce demand for our products and services, increase our costs, reduce our profitability, adversely impact our supply chain or otherwise have a material adverse effect on our business and results of operations.

Since early February 2025, The Bureau of Industry and Security (BIS), a part of the U.S. Commerce Department, has paused the processing of new export license applications, citing a "hold without action" order for applications filed after February 5, 2025. This pause, reportedly due to an internal policy review and ongoing turmoil at the agency, has left exporters with no clear guidance and is expected to significantly lengthen already long application review times. No formal statement or explanation has been issued by BIS or the Commerce Department to the public or industry stakeholders. Such policies and actions could effect our ability to export our products and could reduce demand for our products and services, increase our costs, reduce our profitability, adversely impact our supply chain or otherwise have a material adverse effect on our business and results of operations.

Risks Related to Ownership of Our Common Stock

Our stock price has fluctuated in the past, has recently been volatile and may be volatile in the future, and as a result, investors in our common stock could incur substantial losses.

Our stock price has fluctuated in the past, has recently been volatile and may be volatile in the future. On ~~November~~September 9, ~~2023~~2024, the intra-day sales price of our common stock fluctuated between a reported low sale price of $78.8601 and a reported high sales price of $910.1669. Throughout the fiscal year ~~2024~~2025, the closing sales price of our common stock has fluctuated between a reported low sales price of $75.1250 and a reported high sales price of $1311.4951. We may incur rapid and substantial decreases in our stock price in the foreseeable future that are unrelated to our operating performance or prospects. The stock market in general and the market for companies such as ours in particular have experienced extreme volatility that has often been unrelated to the operating performance of particular companies. As a result of this volatility, investors may experience losses on their investment in our common stock. The market price for our common stock may be influenced by many factors, including the following:

●

investor reaction to our business strategy;

●

the success of competitive products or technologies;

●

our continued compliance with the Nasdaq listing standards;

●

regulatory or legal developments in the United States and other countries, especially changes in laws or regulations applicable to our products;

●

actions taken by regulatory agencies with respect to our products, manufacturing process or sales and marketing terms;

●

the success of our efforts to acquire or in-license additional products or product candidates;

●

developments concerning our collaborations or partners;

●

developments or disputes concerning patents or other proprietary rights, including patents, litigation matters and our ability to obtain patent protection for our products;

●

our ability or inability to raise additional capital and the terms on which we raise it;

●

declines in the market prices of stocks generally;

Table of Contents

●

trading volume of our common stock;

●

sales of our common stock by us or our stockholders;

●

general economic, industry and market conditions; and

●

other events or factors, including those resulting from such events, or the prospect of such events, including war, terrorism and other international conflicts, public health issues including health epidemics or pandemics, and natural disasters such as fire, hurricanes, earthquakes, tornados or other adverse weather and climate conditions, whether occurring in the United States or elsewhere, could disrupt our operations, disrupt the operations of our suppliers or result in political or economic instability.

These broad market and industry factors may seriously harm the market price of our common stock, regardless of our operating performance. Further, recent increases are significantly inconsistent with any improvements in actual or expected operating performance, financial condition or other indicators of value, including our loss per share of $7.12 for our fiscal year ended June 30, 2024. Since the stock price of our common stock has fluctuated in the past, has been recently volatile and may be volatile in the future, investors in our common stock could incur substantial losses. In the past, following periods of volatility in the market, securities class-action litigation has often been instituted against companies. Such litigation, if instituted against us, could result in substantial costs and diversion of management’s attention and resources, which could materially and adversely affect our business, financial condition, results of operations and growth prospects. There can be no guarantee that our stock price will remain at current levels or that future sales of our common stock will not be at prices lower than those sold to investors. 44

These broad market and industry factors may seriously harm the market price of our common stock, regardless of our operating performance. Further, recent increases are significantly inconsistent with any improvements in actual or expected operating performance, financial condition or other indicators of value, including our loss per share of $8.32 for our fiscal year ended June 30, 2025. Since the stock price of our common stock has fluctuated in the past, has been recently volatile and may be volatile in the future, investors in our common stock could incur substantial losses. In the past, following periods of volatility in the market, securities class-action litigation has often been instituted against companies. Such litigation, if instituted against us, could result in substantial costs and diversion of management’s attention and resources, which could materially and adversely affect our business, financial condition, results of operations and growth prospects. There can be no guarantee that our stock price will remain at current levels or that future sales of our common stock will not be at prices lower than those sold to investors.

Additionally, securities of certain companies have recently experienced significant and extreme volatility in stock price due to short sellers of shares of common stock, known as a “short squeeze.” These short squeezes have caused extreme volatility in both the stock prices of those companies and in the market, and have led to the price per share of those companies to trade at a significantly inflated rate that is disconnected from the underlying value of the company. Many investors who have purchased shares in those companies at an inflated rate face the risk of losing a significant portion of their original investment, as in many cases the price per share has declined steadily as interest in those stocks have abated. While we have no reason to believe our shares would be the target of a short squeeze, there can be no assurance that we won’t be in the future, and you may lose a significant portion or all of your investment if you purchase our shares at a rate that is significantly disconnected from our underlying value.

We can sell additional shares of common stock without consulting shareholders and without offering shares to existing shareholders, which would result in dilution of shareholders’ interests in the Company and could depress our stock price.

Our Certificate of Incorporation authorizes 250,000,000 shares of common stock, of which 1,~~701~~758,~~729~~ 953 were outstanding as of June 30, ~~2024~~2025, and our Board is authorized to issue additional shares of our common stock. In addition, our Certificate of Incorporation authorizes 2,500,000 shares of “blank check preferred stock.” Shares of “blank check preferred stock” may be issued in such series and with such rights, privileges, and limitations as the Board may, in its sole discretion, determine. Our Board has designated 300,000 shares as Series A Junior Preferred Stock, none of which are outstanding. The Board has also designated Series C and Series D Preferred Stock, of which no shares and 280,898 shares are outstanding, respectively, as of June 30, ~~2024~~2025.

Although our Board intends to utilize its reasonable business judgment to fulfill its fiduciary obligations to our then existing shareholders in connection with any future issuance of our capital stock, the future issuance of additional shares of our capital stock would cause immediate, and potentially substantial, dilution to our existing shareholders, which could also have a material effect on the market value of the shares. Furthermore, our Board may authorize the issuance of a series of preferred stock that would grant to holders the preferred right to our assets upon liquidation, the right to receive dividend payments before dividends are distributed to the holders of common stock, and the right to the redemption of the shares, together with a premium, prior to the redemption of the common stock. In addition, our Board could authorize the issuance of a series of preferred stock that has greater voting power than the common stock or that is convertible into our common stock, which could decrease the relative voting power of the common stock or result in dilution to our existing shareholders.

40 45

Table of Contents

Our Certificate of Incorporation provides that the Court of Chancery of the State of Delaware will be the sole and exclusive forum for any disputes between us and our stockholders, which could limit stockholders’ ability to obtain a favorable judicial forum for disputes with us or our directors or officers.

Our Certificate of Incorporation provides that unless we consent in writing to the selection of an alternative forum, the Court of Chancery for the State of Delaware is the sole and exclusive forum for claims brought by a stockholder, including claims in the right of the corporation, (i) that are based upon a violation of a duty by a current or former director or officer or stockholder in such capacity or (ii) as to which the Delaware General Corporation Law (the “DGCL”) confers jurisdiction upon the Court of Chancery of the State of Delaware. The provision indicates that if the Court of Chancery does not have jurisdiction, then the Superior Court of the State of Delaware, or, if such other court does not have jurisdiction, the United States District Court for the District of Delaware, shall be the exclusive forum for such action.

These provisions of the bylaws are not a waiver of, and do not relieve anyone of duties to comply with, federal securities laws including those specifying the exclusive jurisdiction of federal courts under the Exchange Act and concurrent jurisdiction of federal and state courts under the Securities Act. Section 22 of the Securities Act provides that federal and state courts have concurrent jurisdiction over lawsuits brought pursuant to the Securities Act or the rules and regulations thereunder. To the extent the exclusive forum provision restricts the courts in which claims arising under the Securities Act may be brought, there is uncertainty as to whether a court would enforce such a provision. Any person or entity purchasing or otherwise acquiring any interest in shares of our capital stock shall be deemed to have notice of and to have consented to these provisions. These provisions may impose additional litigation costs on stockholders in pursuing any such claims, particularly if the stockholders do not reside in or near the State of Delaware, or limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or our directors or officers, which may discourage such lawsuits against us and our directors and officers. Alternatively, if a court were to find our choice of forum provision to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could harm our business, results of operations, and financial condition.

A sale of a substantial number of shares of the common stock may cause the price of our common stock to decline.

If our shareholders sell, or the market perceives that our shareholders intend to sell for various reasons, substantial amounts of our common stock in the public market may make it more difficult for us to sell equity or equity-related securities in the future at a time and price that we deem reasonable or appropriate.

We are a smaller reporting company and, as a result of the reduced disclosure and governance requirements applicable to such companies, our common stock may be less attractive to investors.

We are a smaller reporting company, (i.e., a company with less than $250 million of public float) and we are eligible to take advantage of certain exemptions from various reporting requirements applicable to other public companies. We have elected to adopt these reduced disclosure requirements. We cannot predict if investors will find our common stock less attractive as a result of our taking advantage of these exemptions. If some investors find our common stock less attractive as a result of our choices, there may be a less active trading market for our common stock and our stock price may be more volatile.

Our failure to maintain compliance with Nasdaq’s continued listing requirements could result in the delisting of our Common Stock.

Our common stock is currently listed for trading on the Nasdaq Capital Market. We must satisfy the Nasdaq Capital Market’s continued listing requirements or risk delisting, which would have a material adverse effect on our business. A delisting of our common stock from the Nasdaq Capital Market could materially reduce the liquidity of our common stock and result in a corresponding material reduction in the price of our common stock. In addition, delisting could harm our ability to raise capital through alternative financing sources on terms acceptable to us, or at all, and may result in the potential loss of confidence by investors, suppliers, customers and employees and fewer business development opportunities.

41 46

Table of Contents

If our common stock were delisted from Nasdaq, trading of our common stock would most likely take place on an over-the-counter market established for unlisted securities, such as the OTCQB or the Pink Market maintained by OTC Markets Group Inc. An investor would likely find it less convenient to sell, or to obtain accurate quotations in seeking to buy, our common stock on an over-the-counter market, and many investors would likely not buy or sell our common stock due to difficulty in accessing over-the-counter markets, policies preventing them from trading in securities not listed on a national exchange or other reasons. In addition, as a delisted security, our common stock would be subject to SEC rules as a “penny stock,” which impose additional disclosure requirements on broker-dealers. The regulations relating to penny stocks, coupled with the typically higher cost per trade to the investor of penny stocks due to factors such as broker commissions generally representing a higher percentage of the price of a penny stock than of a higher-priced stock, would further limit the ability of investors to trade in our common stock. In addition, delisting could harm our ability to raise capital through alternative financing sources on terms acceptable to us, or at all, and may result in the potential loss of confidence by investors, suppliers, customers and employees and fewer business development opportunities. For these reasons and others, delisting would adversely affect the liquidity, trading volume and price of our common stock, causing the value of an investment in us to decrease and having an adverse effect on our business, financial condition and results of operations, including our ability to attract and retain qualified employees and to raise capital.

General Risk Factors

We face various risks related to health epidemics, pandemics and similar outbreaks, which may have material adverse effects on our business, financial position, results of operations, and/or cash flows.

We face various risks related to health epidemics, pandemics, and similar outbreaks, including the global outbreak of COVID-19 and its multiple variants. The COVID-19 pandemic had numerous negative consequences for our business, including a reduction in demand for certain of our security screening products and services caused by a significant reduction in airline passenger traffic. To slow and limit the transmission of COVID-19, governments across the world imposed air travel restrictions and businesses and individuals canceled air travel plans. These restrictions and cancelations reduced demand for security screening products and related services at airport checkpoints globally as the number of airline passengers requiring screening fell. The pandemic also hampered our ability to meet with our customers and prospective customers and created supply chain challenges as certain components had longer lead times. The continued spread of COVID-19 and COVID variants also led to disruption and volatility in the global capital markets, which increased the cost of capital and adversely impacted access to capital. While such negative impacts to our business have subsided to some degree, there is risk that new strains of COVID-19 may become more prevalent and cause an extension of or additional negative consequences. In addition, if significant portions of our workforce are unable to work effectively, including because of illness, quarantines, government actions, facility closures, or other restrictions in connection with the COVID-19 pandemic, our operations will likely be impacted. We may be unable to perform fully on our contracts and our costs may increase as a result of the COVID-19 outbreak. These costs may not be recoverable or adequately covered by insurance.

It is possible that the continued spread of COVID-19 and COVID variants could also further cause delay, or limit the ability of customers to perform, including in making timely payments to us; cause delay in regulatory certification testing of our instruments; and cause other unpredictable events. If any of our supply chain phases were interrupted or terminated, we could experience delays in our product development including the availability of products for clinical testing. The occurrence of one or more of these items could have a material adverse effect on our business, liquidity, financial condition, and/or results of operations. The effects of the COVID-19 pandemic may negatively impact productivity, disrupt our business and delay our clinical programs and timelines, the magnitude of which will depend, in part, on the length and severity of the restrictions and other limitations on our ability to conduct our business in the ordinary course. These and similar, and perhaps more severe, disruptions in our operations could negatively impact our business, operating results and financial condition.

In addition, any future clinical trials may be affected by the COVID-19 pandemic. Clinical site initiation and patient enrollment may be delayed due to prioritization of hospital resources toward the COVID-19 pandemic. Also, some patients may not be able to comply with clinical trial protocols if quarantines impede patient movement or interrupt healthcare services. Similarly, our ability to recruit and retain patients and principal investigators and site staff who, as healthcare providers, may have heightened exposure to COVID-19 and adversely impact our clinical trial operations.

Table of Contents

Increased cybersecurity requirements, vulnerabilities, threats, and more sophisticated and targeted computer crime could pose a risk to our systems, networks, products, services, and data.

Increased global cybersecurity vulnerabilities, threats, and more sophisticated and targeted cyber-related attacks pose a risk to the security of our and our customers’, suppliers’, and third-party service providers’ products, systems, and networks and the confidentiality, availability, and integrity of our and our customers’ data. Although we have implemented policies, procedures, and controls to protect against, detect, and mitigate these threats, we remain potentially vulnerable to additional known or unknown threats. We also have access to sensitive, confidential, or personal data or information that is subject to privacy and security laws, regulations, and customer-imposed controls. Despite our efforts to protect sensitive, confidential, or personal data or information, we may be vulnerable to material security breaches, theft, misplaced or lost data, programming errors, employee errors, and/or malfeasance that could potentially lead to the compromising of sensitive, confidential, or personal data or information, improper use of our systems or networks, unauthorized access, use, disclosure, modification, or destruction of information, defective products, production downtimes, and operational disruptions. In addition, a cyber-related attack could result in other negative consequences, including damage to our reputation or competitiveness and remediation or increased protection costs, and could subject us to fines, damages, litigation, and enforcement actions.

Increased costs associated with corporate governance compliance may significantly impact our results of operations.

As a public company, we incur significant legal, accounting, and other expenses due to our compliance with regulations and disclosure obligations applicable to us, including compliance with the Sarbanes-Oxley Act of 2002, or the Sarbanes-Oxley Act, as well as rules implemented by the SEC, and Nasdaq. The SEC and other regulators have continued to adopt new rules and regulations and make additional changes to existing regulations that require our compliance. In July 2010, the Dodd-Frank Wall Street Reform and Consumer Protection Act, or the Dodd-Frank Act, was enacted. There are significant corporate governance and executive compensation related provisions in the Dodd-Frank Act that have required the SEC to adopt additional rules and regulations in these areas. Stockholder activism, the current political environment, and the current high level of government intervention and regulatory reform may lead to substantial new regulations and disclosure obligations, which may lead to additional compliance costs and impact, in ways we cannot currently anticipate, the manner in which we operate our business. Our management and other personnel devote a substantial amount of time to these compliance programs and monitoring of public company reporting obligations, and as a result of the new corporate governance and executive compensation related rules, regulations, and guidelines prompted by the Dodd-Frank Act, and further regulations and disclosure obligations expected in the future, we will likely need to devote additional time and costs to comply with such compliance programs and rules. These rules and regulations will cause us to incur significant legal and financial compliance costs and will make some activities more time-consuming and costly.The Sarbanes-Oxley Act requires that we maintain effective disclosure controls and procedures and internal control over financial reporting. We are continuing to develop and refine our disclosure controls and other procedures that are designed to ensure that information required to be disclosed by us in the reports that we file with the SEC is recorded, processed, summarized, and reported within the time periods specified in SEC rules and forms, and that information required to be disclosed in reports under the Exchange Act is accumulated and communicated to our principal executive and financial officers. Our current controls and any new controls that we develop may become inadequate, and weaknesses in our internal control over financial reporting may be discovered in the future. Any failure to develop or maintain effective controls could adversely affect the results of periodic management evaluations and annual independent registered public accounting firm attestation reports regarding the effectiveness of our internal control over financial reporting, which we may be required to include in our periodic reports that we file with the SEC under Section 404 of the Sarbanes-Oxley Act, and could harm our operating results, cause us to fail to meet our reporting obligations, or result in a restatement of our prior period financial statements. If we are not able to demonstrate compliance with the Sarbanes-Oxley Act, that our internal control over financial reporting is perceived as inadequate, or that we are unable to produce timely or accurate financial statements, investors may lose confidence in our operating results, and the price of our common stock could decline. We are required to comply with certain of the SEC rules that implement Section 404 of the Sarbanes-Oxley Act, which requires management to certify financial and other information in our quarterly and annual reports and provide an annual management report on the effectiveness of our internal control over financial reporting. This assessment needs to include the disclosure of any material weaknesses in our internal control over financial reporting identified by our management or our independent registered public accounting firm. During the evaluation and testing process, if we identify one or more material weaknesses in our internal control over financial reporting or if we are unable to complete our evaluation, testing, and any required remediation in a timely fashion, we will be unable to assert that our internal control over financial reporting is effective. These developments could make it more difficult for us to retain qualified members of our Board of Directors, or qualified executive officers. We are presently evaluating and monitoring regulatory developments and cannot estimate the timing or magnitude of additional costs we may incur as a result. To the extent these costs are significant, our general and administrative expenses are likely to increase.

Table of Contents

Our insurance coverage may be inadequate to cover all significant risk exposures.

We are exposed to liabilities that are unique to the products and services we provide. We maintain insurance for certain risks, and we believe our insurance coverage is consistent with general practices within our industry. However, the amount of our insurance coverage may not cover all claims or liabilities and we may be forced to bear substantial costs.

Item 1B. Unresolved Staff Comments

None.

Item 1C. Cybersecurity

Board of Directors Oversight

Our board of directors, as a whole and through its committees, holds overall oversight responsibility for our risk management processes, including in relation to risks from cybersecurity threats. Our board of directors exercises its oversight function through the audit committee, which oversees the management of risk exposure across various areas, including cybersecurity risks, in accordance with its charter. The audit committee is comprised of board members with diverse expertise including risk management and technology, which we believe enables them to oversee cybersecurity risks.

Management’s Role

We have day-to-day administration and management of our cybersecurity program, under the direct supervision of our IT Manager in conjunction with executive management, including our Chief Financial Officer (“CFO”) through August 12, 2025, and beginning on August 13, 2025 our Chief Operating Officer ("COO"). Our executive management is responsible for informing the audit committee on cybersecurity risks, provides the audit committee with risk briefings as needed, and performs at least annual reviews of cybersecurity risks and threats in order to assess and adjust our processes to prevent, detect, mitigate, and remediate any such risks and threats. We also work with external security service providers to support our security monitoring and threat detection capabilities and have implemented a process for such external providers to report relevant findings to executive management, where appropriate.

Primary responsibility for assessing, monitoring and managing our cybersecurity risks rests with our information technology team overseen by the ~~CFO~~COO. ~~With nine years of experience at the Company, our CFO is familiar with our technology infrastructure and risk profile.~~ Our information technology team tests our compliance with Center for Internet Security version 8 standards (“CIS”), remediates known cybersecurity risks, and leads our employee training program as such items relate to cybersecurity.

Our ~~CFO~~COO and information technology team are continually informed about the latest developments in cybersecurity, including potential threats and innovative risk management techniques. The ~~CFO~~COO and information technology team implements and oversees processes for the regular monitoring of our information systems. This includes the deployment of advanced security measures and regular system audits to identify potential vulnerabilities. In the event of a cybersecurity incident, the ~~CFO~~COO and information technology team are equipped with a well-defined incident response plan, which includes escalation to executive management and the audit committee, and relevant public disclosure, as appropriate.

Cybersecurity Risk Management and Strategy

Our cybersecurity program, which is informed by CIS, includes processes for identification, assessment, and management of cybersecurity risks. We conduct periodic risk assessments, including with support from external vendors, to assess our cyber program, identify potential areas of enhancement, and develop strategies for the mitigation of cyber risks. We also conduct regular security testing and have established a vulnerability detection process, supported by security testing, that is designed to address the treatment of identified security risks based on severity.

Third-Party Risk

We may periodically engage a range of external experts, including cybersecurity assessors, consultants, and auditors to evaluate and test our information systems. These partnerships enable us to leverage specialized knowledge and insights, ensuring our cybersecurity strategies and processes generally follow industry-recognized standards and frameworks, and are compliant with applicable laws.

4449

Table of Contents

As part of our cybersecurity risk management program, we have a process to assess and review the cybersecurity practices of major third-party vendors and service providers that access, process, collect, share, create, store, transmit or destroy our information or have access to our systems, including through review of applicable certifications, and security reports, and contractual requirements, as appropriate. Before engagement, we conduct security assessments of critical third-party providers and maintain ongoing monitoring to ensure compliance with our cybersecurity standards. The monitoring includes regular assessments by our information technology team and executive management. This approach is designed to mitigate risks related to data breaches or other security incidents involving third-parties.

Risks from Cybersecurity Threats

We are informed about and monitor the prevention, detection, mitigation, and remediation of cybersecurity risks through various means, including by leveraging a managed security service provider and other third-party security software and technology services. In addition, we use various internal and external processes and technologies, including third-party security solutions, monitoring, and alerting tools and resources, designed to monitor, identify, and address risks from cybersecurity threats. We also have implemented processes and technologies for network monitoring and data loss prevention procedures.

We have adopted an incident response plan to guide us in responding to cybersecurity incidents and maintain processes to inform and update executive management and the audit committee about security incidents that may pose a significant risk for our business, as applicable.

We have not identified any cybersecurity incidents or threats that have materially affected us or are reasonably likely to materially affect us, including our business strategy, results of operations or financial condition; however, like other companies in our industry, we and our third-party vendors may, from time to time, experience threats and security incidents relating to our and our third-party vendors’ information systems. For more information about the cybersecurity risks we face, see “Increased cybersecurity requirements, vulnerabilities, threats, and more sophisticated and targeted computer crime could pose a risk to our systems, networks, products, services, and data” in “Risk Factors” in Part I, Item 1A of this Annual Report on Form 10-K.

Item 2. Properties

During fiscal year ~~2024~~2025, Astrotech had two existing facility leases and several equipment leases. Astrotech currently leases a research and development facility (the “R&D facility”) of approximately 5,960 square feet in Austin, Texas that includes a laboratory, a small production shop, and offices for staff, although our accounting and administrative employees continue to work remotely. The lease commenced on June 1, 2021 and had an initial lease term of 36 months. On November 11, 2022, the Company signed a lease extension agreement for the R&D facility, extending the term of such lease through April 30, 2025.

On November 22, 2022, Astrotech entered into a sublease agreement for an additional facility (the “subleased facility”) directly adjacent to the R&D facility. The subleased facility consists of approximately 3,900 square feet and provided the space needed as the Company launched its AgLAB and Pro-Control products. The sublease commenced on December 1, 2022 and has a lease term of 29 months. The R&D and Manufacturing Facility and the Subleased Facility are collectively referred to herein as the “Donley Facilities.”

~~Our~~On January ~~equipment~~20, 2025, the Company entered into a lease extension to extend the terms of the leases associated with the Donley Facilities effective May 1, 2025 (“Donley Facilities Lease Extension”). We are currently continuing to lease on a month-to-month basis. The monthly rent for ~~devices~~the ~~used~~Donley inFacilities ~~our~~will ~~research~~be ~~and~~$14,186 during ~~development~~the ~~efforts~~extension period.

WeOn January ~~believe~~29, ~~that~~2025, we ~~our~~entered ~~current~~into ~~facilities~~a ~~and~~new ~~equipment~~lease ~~are~~agreement ~~well~~for ~~maintained~~a ~~and in~~facility ~~good~~of ~~condition.~~approximately ~~The~~17,628 square ~~facilities~~feet ~~and~~in ~~equipment~~Austin, ~~are~~Texas ~~adequate~~(the “Metric facility”) for ~~our~~a ~~present needs~~term ~~but not for~~of ~~our~~89-months, ~~currently~~which ~~foreseeable~~such ~~needs~~term commences July 1, 2025. WeThe ~~anticipate~~Metric ~~relocating~~facility is intended to asupport ~~larger~~and encompass all Austin based functions. Our total contractual base rent obligation for the Metric facility ~~during~~is ~~fiscal~~approximately ~~year~~$3.0 million, ~~2025~~less a tenant allowance of $317.3 thousand.

Our equipment lease is for a device used in our research and development efforts.

We believe that our current facilities and equipment are well maintained and in good condition. The facilities and equipment are adequate for our present needs but not for our currently foreseeable needs. We expect that we will be relocating to the Metric facility during fiscal year 2026.

Item 3. Legal Proceedings

From time to time, the Company is subject to legal and administrative proceedings, settlements, investigations, claims and actions. The Company’s assessment of the likely outcome of litigation matters is based on its judgment of a number of factors including experience with similar matters, past history, precedents, relevant financial and other evidence and facts specific to the matter. Notwithstanding the uncertainty as to the final outcome, based upon the information currently available, management does not believe any matters, individually or in aggregate, will have a material adverse effect on the Company’s financial position or results of operations.

Table of Contents

Item 4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters, and Issuer Purchases of Equity Securities

Market Information, Holders, and Dividends

Our common stock is principally traded on The Nasdaq Capital Market under the symbol ASTC. We have never paid cash dividends and have no intention of paying dividends in the future.

We have 250,000,000 shares of common stock authorized for issuance. As of September 1724, ~~2024~~2025, we had 1,~~701~~758,~~729~~953 shares of common stock outstanding, which were held by approximately 28 holders of record. This number does not include beneficial or other owners for whom common stock may be held in “street” name. The last reported sale price of our common stock as reported by The Nasdaq Capital Market on September 1724, ~~2024~~ 2025, was $85.28 14 per share.

Sales of Unregistered Securities

None.

Item 6. Reserved

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following information should be read in conjunction with the Consolidated Financial Statements and the accompanying Notes included below in Item 8 of this Annual Report on Form 10-K. This discussion contains forward-looking statements that involve risks and uncertainties. Our actual results may differ materially from those anticipated in these forward-looking statements.

Overview

Our mission isencompasses tothe ~~expand~~advancement ~~access~~of toboth mass spectrometry and ~~its~~gas ~~use~~chromatography, ~~through~~two ~~the~~powerful ~~deployment~~analytical oftechniques ~~devices~~that ~~designed~~together ~~specifically~~enable ~~for~~precise ~~the~~detection ~~appropriate~~and ~~levels~~identification of ~~precision~~chemical ~~required~~compounds inacross a wide range of high-~~volume,~~demand environments.  We aim to expand access to mass spectrometry by simplifying the complexity of operating these devices within real-time testing environments such as airports, border checkpoints, cargo hubs, infrastructure security, correctional facilities, military bases, law enforcement centers, and industrial locations. We are introducing our new line of products that are ultra-portable, on-site, rugged environmental testing instruments, featuring our proprietary ATi Mass Spectrometer Technology ("MS") and ATi Gas Chromatography Column ("GC") to achieve our mission through simplifying the user interface, ruggedizing the critical components to endure MS/GC field work, and enabling multiple configurations for sample intake options. The Astrotech Mass Spectrometer Technology™ ~~platform~~and ~~achieves~~ATi Gas Chromatograph Column (GC) platforms achieve our mission through simplifying the user interface, automating the complicated calibration process, ruggedizing the critical components to endure MS/GC field work, and enabling multiple configurations for sample intake options.  

Additional details about our business are provided in Part I, Item 1. "Business” of this Form 10-K.

~~Fiscal Year 2024 Business Highlights~~ 51

AsFiscal ~~of June~~Year ~~30,~~2025 ~~2024, the~~Business ~~Company has deployed the TRACER 1000 in approximately 30 locations in 14 countries throughout Europe and Asia.~~Highlights

OnAs ~~November~~of June 1330, ~~2023~~2025,  we ~~announced~~ have deployed the ~~acceptance~~TRACER of1000 ain ~~significant~~approximately ~~purchase~~34 locations ~~order~~in ~~for~~16 ~~seven~~countries ofacross ~~our~~the ~~TRACER~~United ~~1000™~~States, ~~Explosive~~Europe ~~Trace~~and ~~Detectors (“ETD”)~~Asia.

On ~~November~~January 288, ~~2023~~2025, we announced ~~the~~that ~~presentation~~1st ofDetect ~~the~~Corporation ~~AgLAB~~had ~~Maximum~~been ~~Value~~awarded ~~Process™~~a ~~(“MVP™”)~~research atand ~~MJBizcon.~~development ~~The~~contract ~~MVP™~~with ~~is an innovative process control system to increase~~ the ~~potency~~U.S. ofDepartment ~~ending-weight yields and revenue by 20% or more using AgLAB’s proprietary integration~~ of ~~our~~Homeland ~~AMS~~Security ~~Technology~~("DHS") ~~with testing methods~~ to ~~provide~~research the ~~real-time~~TRACER ~~insights~~1000 ~~needed by distillers~~ for ~~adjustments~~DHS tonext ~~temperature,~~generation ~~feed-rate,~~explosives ~~and~~trace ~~pressure~~detection.

46 On January 14, 2025, our wholly owned subsidiary, 1st Detect Corporation, announced that it has been awarded research and development contract 70RSAT24CB0000015 with the U.S. Department of Homeland Security (“DHS”) to research, develop and mature the TRACER 1000 for DHS next generation explosives trace detection.

~~Table~~Astrotech received a $429,000 purchase order for TRACER 1000™ explosive trace detectors ("ETDs") from Intuitive Research and Technology, a TSA approved contractor. On January 24, 2025, we fulfilled the purchase order and sold six TRACER 1000 explosive trace detectors to Intuitive Research and Technology Corporation. This is the first TSA-approved sale of ~~Contents~~ our TRACER 1000 ETD, which utilizes mass spectrometry technology, known for its accuracy and low false alarm rate.

On ~~December~~February 1228, ~~2023~~2025, weAstrotech ~~announced~~Corporation (the ~~formation~~“Company”) ofissued ~~our~~a ~~new~~press ~~wholly-owned~~release ~~subsidiary,~~announcing ~~Pro-Control,~~that ~~and~~it ~~ATI’s~~has ~~entry~~created ~~into~~a annew ~~exclusive~~wholly ~~license~~owned ~~with~~subsidiary, ~~Pro~~EN-~~Control~~SCAN, ~~to utilize our AMS Technology for industrial process control applications involving chemical distillation outside of the agriculture industry~~Inc., ~~Pro-Control uses advanced mass spectrometer instrumentation~~ to ~~monitor~~manufacture and ~~control~~sell ~~the~~a ~~production~~new ~~and~~line ~~operations~~ of ~~manufacturing~~instruments ~~processes~~built ~~using~~for ~~real-time,~~environmental ~~in-process~~testing ~~samples.~~applications ~~Pro-Control~~using provides the vital spectral qualitative and quantitative data needed to control the production parameters (temperatures, flow, speed, pressure) while significantly improving efficiency. Pro-Control has introduced its proprietary ~~Pro-Control~~ATi ~~Maximum~~Gas ~~Value~~Chromatograph ~~Processing~~ and ~~the~~Astrotech ~~Pro-Control~~Mass ~~1000-D2™~~Spectrometer ~~mass spectrometer, which in combination are designed to test, measure and increase reaction intermediates, purity and percent yields in industrial processes~~Technology™. 

On March 2510, ~~2024~~2025, weAstrotech Corporation announced ~~that~~the welaunch ~~began~~of ~~accepting~~its ~~orders~~enhanced ~~for the~~ TRACER 1000 ~~Narcotics~~ Narcotic Trace Detector ~~(“NTD”).~~from ~~The~~its ~~TRACER~~1st ~~1000~~Detect ~~NTD~~subsidiary. This isinnovative amobilized ~~high-performance~~mass ~~laboratory~~spectrometer ~~instrument~~is ~~capable~~specifically ofconfigured ~~rapid~~to ~~detection~~screen offor ~~trace~~the ~~levels~~full range of ~~narcotic~~synthetic ~~compounds~~opiates inand ~~seconds.~~novel ~~Currently~~psychoactive substances, ~~the~~delivering ~~Company’s~~accuracy ~~Tracer~~and ~~1000~~speed ~~ETD~~to iscounter ~~now~~the ~~operated~~global indrug ~~multiple locations throughout the world~~crisis.

On ~~April~~June 812, ~~2024~~2025, weour ~~announced~~wholly ~~that~~owned ~~the~~subsidiary, ~~TRACER~~1st ~~1000 NTD~~Detect ~~and~~Corporation ~~ETD~~sold ~~which are listed in~~ the ~~U.S.~~first ~~General~~sale ~~Services~~and ~~Administration~~deployment ~~("GSA")~~of ITits ~~Schedule 70 under Contract No. GS-35F-250GA with SRI Group LLC, Special Item Number 334290. The~~ TRACER 1000 ~~NTD~~Narcotic Trace ~~and~~Detector in ~~ETD are~~Vietnam, ~~high-performance~~by ~~laboratory~~way ~~instruments capable~~ of ~~rapid~~its ~~detection~~subsidiary of1st ~~trace levels of narcotic and explosive compounds in seconds~~Detect. This ITmilestone ~~Schedule~~marks ~~70 is~~ a ~~long-term~~significant ~~contract~~step ~~issued~~in byexpanding the ~~GSA~~1st toDetect ~~commercial~~footprint technology vendors that allows sales to the U.S. federal government, one of the largest buyers of goods and services in the world.  The TRACER 1000 NTD and ETD provide a ruggedized platform that can be applied across ~~various~~Southeast ~~markets~~Asia ~~including airports, border security, checkpoint, cargo,~~ and ~~infrastructure~~reinforces ~~security,~~its ~~correctional~~commitment ~~facilities, military, and law enforcement.  We continue~~ to ~~showcase~~enhancing ~~the~~narcotics ~~TRACER~~trace ~~1000~~detection ~~NTD~~inspection ~~and ETD at the trade events in the U~~capabilities.S.

OnWe ~~June~~have ~~13,~~also ~~2024,~~started ~~AgLAB~~ the process to pass TSA checkpoint testing. This process involves Developmental Test and SCEvaluation ~~Laboratories~~in ~~(“SC~~which ~~Labs”~~the Transportation Security Laboratory ("TSL") ~~entered~~will ~~into~~test athe ~~master~~TRACER ~~lease~~1000 ~~agreement~~and ~~providing~~work ~~for~~with 1st Detect to ensure its readiness to enter certification testing. The certification test is then completed by the ~~joint~~Independent ~~marketing~~Test & Evaluation department of TSL. As of the ~~AgLAB~~fiscal ~~1000-D2™ mass~~year ~~spectrometer~~2023 ~~and~~budget the ~~AgLAB~~government ~~Maximum~~had ~~Value~~over ~~Process™ testing~~6,000 ~~method~~ETD tounits SCat ~~Labs’~~checkpoint ~~clients~~and baggage screening points for which we believe that the TSA would benefit from utilizing our AMS Technology.

OnEach ~~June~~of ~~20,~~these ~~2024,~~fiscal ~~after~~year a2025 ~~long-term~~announcements ~~engagement~~reflect ~~with~~ the ~~TSA~~progress ~~beginning~~made inby ~~2018,~~our webusiness ~~announced~~units ~~the~~in ~~U.S.~~developing ~~Transportation~~and ~~Security~~demonstrating ~~Administration~~relevant ~~(“TSA”)~~solutions ~~approved the TRACER 1000 for the Air Cargo Security Technology List (“ACSTL”).  This action advances the TRACER 1000~~ to ~~Stage~~problems IIfaced ~~testing~~by companies and ~~allows~~agencies usoperating ~~to sell the TRACER 1000 to air cargo companies~~ in ~~the~~our ~~United~~target ~~States~~markets. InThe ~~Stage~~additional IIapplications ~~testing,~~of the ~~Company~~AMS ~~will~~Technology ~~begin~~and ~~field~~our ~~trials~~growing ~~with~~channel ~~the~~partner ~~TSA. If~~relationships ~~field~~create ~~trials~~opportunities ~~are successful,~~for ~~the~~us ~~TRACER~~to ~~1000~~generate ~~will~~revenue begrowth ~~added~~in tosubsequent ~~the~~fiscal ~~"qualified" list~~years.

The Company has also started the process to pass TSA checkpoint testing. This process involves Developmental Test and Evaluation in which the Transportation Security Laboratory ("TSL") will test the TRACER 1000 and work with 1st Detect to ensure its readiness to enter certification testing. The certification test is then completed by the Independent Test & Evaluation department of TSL. As of the fiscal year 2023 budget the government had over 6,000 ETD units at checkpoint and baggage screening points for which we believe that the TSA would benefit from utilizing our AMS Technology. 52

Each of these fiscal year 2024 announcements reflect the progress made by our business units in developing and demonstrating relevant solutions to problems faced by companies and agencies operating in our target markets. The additional applications of the AMS Technology and our growing channel partner relationships create opportunities for us to generate revenue growth in subsequent fiscal years.

Critical Accounting Estimates

The discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with United States Generally Accepted Accounting Principles (“U.S. GAAP”). The preparation of these financial statements requires us to make estimates and judgments that directly affect the reported amounts of assets, liabilities, revenues, expenses, and related disclosure of contingent assets and liabilities in ~~the~~our ~~Company’s~~ consolidated financial statements and accompanying notes. A critical accounting estimate is one that involves a significant level of estimation uncertainty and have had or are reasonably likely to have a material impact on our financial condition or results of operations. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Management continuously evaluates its critical accounting policies and estimates, including those used in evaluating the recoverability of long-lived assets, recognition of revenue, valuation of inventory, and the recognition and measurement of loss contingencies, if any. Actual results may differ from these estimates under different assumptions or conditions. We believe the following accounting policies require us to make significant judgments and estimates in the preparation of our consolidated financial statements.

Table of Contents

Revenue Recognition

Astrotech recognizes revenue employing the generally accepted revenue recognition methodologies described under the provisions of Accounting Standards Codification (“ASC”) Topic 606 “Revenue from Contracts with Customers” (“Topic 606”), which was adopted by ~~the~~us ~~Company~~ in fiscal year 2019. The methodology used is based on contract type and how products and services are provided. The guidelines of Topic 606 establish a five-step process to govern the recognition and reporting of revenue from contracts with customers. The five steps are: (i) identify the contract with a customer, (ii) identify the performance obligations within the contract, (iii) determine the transaction price, (iv) allocate the transaction price to the performance obligations within the contract, and (v) recognize revenue when or as the performance obligations are satisfied.

Astrotech has multiple revenue sources such as product and related consumable sales, grant revenue, recurring maintenance & extended warranty services, ~~lease revenue,~~ repairs and training.

An additional factor is reasonable assurance of collectability. This necessitates deferral of all or a portion of revenue recognition until collection. ~~During~~ For the ~~fiscal~~ year ended June 30, ~~2024~~2025,, ~~the~~we ~~Company~~generated ~~had~~approximately ~~three material customers that comprised substantially all of its~~ $1.70 million in revenue. ~~During the fiscal year ended June 30, 2023, the Company recognized revenue~~ from ~~four material~~nine customers ~~for~~that ~~total~~represented ~~revenue of $750 thousand. Revenue was recognized at~~ a ~~point~~significant inportion ~~time~~of ~~consistent~~total ~~with~~revenue ~~the~~for ~~guidelines~~fiscal inyear ~~Topic~~end ~~606~~2025.

Contract Assets and Liabilities. ~~The~~We ~~Company enters~~ enter into contracts to sell products and provide services, and it recognizes contract assets and liabilities that arise from these transactions. ~~The~~We ~~Company recognizes~~ recognize revenue and corresponding accounts receivable according to Topic 606 and, at times, recognizes revenue once all performance obligations have been met, in advance of the time when contracts give us the right to invoice a customer. ~~The~~We ~~Company~~ may also receive consideration, per the terms of a contract, from customers prior to transferring goods to the customer. ~~The~~We ~~Company records~~ record customer deposits as deferred revenue. Additionally, ~~the~~we ~~Company~~ may receive payments, most typically for service and warranty contracts, at the onset of the contract and before services have been performed. In such instances, ~~the Company records~~ we record a deferred revenue liability. ~~The~~We ~~Company recognizes~~ recognize these contract liabilities as sales after all revenue recognition criteria are met.

Practical Expedients. Under its contracts with customers, ~~the Company stands~~ we stand ready to deliver product upon receipt of a purchase order. Accordingly, ~~the~~we ~~Company~~have ~~has~~ no performance obligations under its contracts until its customers submit a purchase order. ~~The~~We ~~Company does~~ do not enter into commitments to provide goods or services that have terms greater than one year. In limited cases, ~~the~~we ~~Company does~~ do require payment in advance of shipping product. Typically, product is shipped within a few days after prepayment is received. These prepayments are recorded as contract liabilities on the consolidated balance sheet and are included in accounts payable and accrued liabilities. As the performance obligation is part of a contract that has an original expected duration of less than one year, ~~the~~we ~~Company has~~ have applied the practical expedient to omit disclosures regarding remaining performance obligations. In cases where ~~the~~we ~~Company~~are is responsible for shipping after the customer has obtained control of the goods, it has elected to treat the shipping activities as fulfillment activities rather than as a separate performance obligation. ~~The~~We ~~Company~~ also ~~applies~~apply a practical expedient to expense direct costs of obtaining a contract when incurred because the amortization period would have been one year or less.

Product Sales. The Company recognizes revenue from sales of products upon shipment or delivery when control of the product transfers to the customer, depending on the terms of each sale, and when collection is probable. In the circumstance where terms of a product sale include subjective customer acceptance criteria, revenue is deferred until the Company has achieved the acceptance criteria unless the customer acceptance criteria are perfunctory or inconsequential. The Company generally offers customers payment terms of 60 days or less. 53

~~Freight~~Product Sales. We ~~The~~recognize revenue ~~Company~~from ~~records~~sales ~~shipping~~of ~~and~~products ~~handling~~upon ~~fees~~shipment ~~that~~or itdelivery ~~charges~~when control of the product transfers to ~~its~~the ~~customers~~customer, asdepending ~~revenue~~on the terms of each sale, and ~~related~~when ~~costs~~collection asis ~~cost~~probable. In the circumstance where terms of a product sale include subjective customer acceptance criteria, revenue is deferred until we have achieved the acceptance criteria unless the customer acceptance criteria are perfunctory or inconsequential. We generally offer customers payment terms of 60 days or less.

~~Multiple~~Freight. ~~Performance~~We ~~Obligations.~~record ~~Certain~~shipping ~~agreements with customers include the sale of equipment involving multiple elements in cases where obligations in a contract are distinct~~ and ~~thus~~handling ~~require~~fees ~~separation into multiple performance obligations, revenue recognition guidance requires~~ that ~~contract~~it ~~consideration~~charges ~~be allocated~~ to ~~each distinct performance obligation based on~~ its ~~relative~~customers ~~standalone selling price. The value allocated to each performance obligation is then recognized~~ as revenue ~~when~~and ~~the~~related ~~revenue~~costs ~~recognition~~as ~~criteria~~cost ~~for each distinct promise or bundle~~ of ~~promises has been met~~revenue.

48 Multiple Performance Obligations. Certain agreements with customers include the sale of equipment involving multiple elements in cases where obligations in a contract are distinct and thus require separation into multiple performance obligations, revenue recognition guidance requires that contract consideration be allocated to each distinct performance obligation based on its relative standalone selling price. The value allocated to each performance obligation is then recognized as revenue when the revenue recognition criteria for each distinct promise or bundle of promises has been met. Government contracts have specific individual performance obligations known as milestones. Each milestone has a standalone selling price and is allocated directly to that performance obligation. Revenue under long-term government contracts is recorded under the percentage of completion method.

~~Table~~The standalone selling price for each performance obligation is an amount that depicts the amount of ~~Contents~~ consideration to which the entity expects to be entitled in exchange for transferring the good or service. When there is only one performance obligation associated with a contract, the entire amount of consideration is attributed to that obligation. When a contract contains multiple performance obligations, the standalone selling price is first estimated using the observable price, which is generally a list price net of applicable discount or the price used to sell the good or service in similar circumstances. In circumstances when a selling price is not directly observable, we will estimate the standalone selling price using information available to it including its market assessment and expected cost, plus margin.

The ~~standalone~~timetable ~~selling~~for ~~price~~fulfillment ~~for~~of each of the distinct performance ~~obligation~~obligations iscan anrange ~~amount~~from ~~that~~completion ~~depicts~~in ~~the~~a short amount of ~~consideration~~time toand ~~which~~entirely ~~the~~within ~~entity~~a ~~expects~~single toreporting beperiod ~~entitled~~to incompletion ~~exchange~~over ~~for~~several ~~transferring~~reporting ~~the~~periods. ~~good~~The ortiming ~~service.~~of ~~When~~revenue ~~there~~recognition isfor ~~only~~each ~~one~~ performance obligation ~~associated~~may ~~with~~be adependent ~~contract~~upon several milestones, ~~the~~including ~~entire~~physical ~~amount~~delivery of ~~consideration~~equipment, iscompletion ~~attributed~~of tosite ~~that~~acceptance ~~obligation.~~test, ~~When~~and ain ~~contract contains multiple performance obligations,~~ the ~~standalone~~case ~~selling~~of ~~price~~after-market isconsumables ~~first~~and ~~estimated~~service ~~using~~deliverables, the ~~observable~~passage ~~price,~~of ~~which~~time. isThe ~~generally~~total arevenue ~~list~~was ~~price~~approximately ~~net~~$920 ofthousand ~~applicable~~in ~~discount~~point orin ~~the~~time ~~price~~and ~~used~~$130 tothousand ~~sell~~over ~~the~~time ~~good~~for or2025 ~~service~~and ~~in similar circumstances~~$1.56 Inmillion ~~circumstances~~at ~~when~~point ain ~~selling~~time ~~price~~and is$88 ~~not~~thousand ~~directly~~over ~~observable,~~time ~~the~~for ~~Company~~2024. ~~will~~All ~~estimate~~revenue ~~the~~was ~~standalone~~substantially ~~selling~~related ~~price using information available~~ to itone ~~including~~product ~~its~~category ~~market~~for ~~assessment~~both 2025 and ~~expected cost, plus margin~~2024.

The timetable for fulfilment of each of the distinct performance obligations can range from completion in a short amount of time and entirely within a single reporting period to completion over several reporting periods. The timing of revenue recognition for each performance obligation may be dependent upon several milestones, including physical delivery of equipment, completion of site acceptance test, and in the case of after-market consumables and service deliverables, the passage of time. The total revenue was approximately $1.56 million in point in time and $88 thousand over time for 2024 and $750 thousand at point in time and $0 over time for 2023. All revenue was substantially related to one product category for both 2024 and 2023.

Impairment of Long-lived Assets

We review the carrying amount of our long-lived assets, including property and equipment, for impairment whenever events or changes in business circumstances indicate that the carrying amount of an asset or an asset group may not be fully recoverable. If indicators of impairment exist, an impairment loss would be recognized when the estimated undiscounted future cash flows expected to result from the use of the asset or asset group and its eventual disposition are less than its carrying amount. The impairment charge is determined based upon the excess of the carrying value of the asset over its estimated fair value, with estimated fair value determined based upon an estimate of discounted future cash flows or other appropriate measures of estimated fair value. For purposes of recognition of impairment for long-lived assets, we group assets and liabilities at the lowest level for which cash flows are separately identifiable.

Valuation of Inventory

Inventories are stated at the lower of cost or net realizable value. Cost is computed using standard cost, which approximates actual cost on a first-in, first-out basis. We reserve or write down inventory for estimated obsolescence, inventory in excess of reasonably expected sales, or unmarketable inventory, in an amount equal to the difference between the cost of inventory and the estimated market value, based upon assumption about future demand and market conditions. If actual market conditions are less favorable than those projected, additional inventory adjustments may be required. Inventory impairment charges establish a new cost basis for inventory and charges are not reversed subsequently to income, even if circumstances later suggest that increased carrying amounts are recoverable.

Warranty Provision

We offer our customers warranties on the products that we sell. These warranties typically provide for repairs and maintenance of the products if problems arise during a specified time period after original shipment. Concurrent with the sale of products, we record a provision for estimated warranty expenses with a corresponding increase in cost of goods sold. We periodically adjust this provision based on historical experience and anticipated expenses, which could impact our cost of revenue and gross margin. We charge actual expenses of repairs under warranty, including parts and labor, to this provision when incurred. The current obligation for warranty provision is included in accrued expenses and other liabilities in the consolidated balance sheets. 

49 54

Table of Contents

Results of Operations for the Years Ended June 30, ~~2024~~2025 and ~~2023~~2024

Selected financial data for the fiscal years ended June 30, ~~2024~~2025 and ~~2023~~2024 of our operations are as follows:

	Years Ended June 30,
(In thousands)	~~2024~~2025			~~2023~~2024			Variance
Revenue	$	1,~~664~~049		$	~~750~~1,664		$	~~914~~(615	)
Cost of revenue		~~913~~574			~~444~~913			~~(469~~339	)
Gross profit		~~751~~475			~~306~~751			~~445~~(276	)
Gross margin		45.13	%		4045.81	%		40.32	%
Operating expenses
Selling, general and administrative		7,~~241~~067			57,~~775~~241			~~(1,466~~174	)
Research and development		68,~~790~~142			56,~~591~~790			(1,~~199~~352	)
Total operating expenses		1415,~~031~~209			1114,~~366~~031			(21,~~665~~178	)
Loss from operations		(1314,~~280~~734	)		(1113,~~060~~280	)		(21,~~220~~454	)
Other income and expense, net		~~1,616~~886			1,~~418~~616			~~198~~(730	)
Income tax expense		(2)	)		—(2)			(2-	)
Net loss	$	(1113,~~666~~850	)	$	(911,~~642~~666	)	$	(2,~~024~~184	)
Net unrealized gain (loss)		276			(254	)		530
Net unrealized gain		313			276			37
Total comprehensive loss	$	(1113,~~390~~537)	)	$	(911,~~896~~390	)	$	(12,~~494~~147	)

Revenue – Total revenue ~~increased~~ decreased by $~~914~~615 thousand, or ~~121~~37.90%, to $1.70 million for the fiscal year ended June 30, ~~2024~~2025, compared to $~~750~~1.7 ~~thousand~~million for the fiscal year ended June 30, ~~2023~~2024. ~~Both~~In ~~of the~~both fiscal years ~~2024~~2025 and ~~2023~~ 2024, revenue was ~~comprised~~primarily ofderived from sales ~~related to~~of ~~our~~ TRACER 1000 units, a government grant, as well as ongoing sales of consumables and recurring maintenance services for the TRACER 1000. The ~~increase~~decrease was due to ~~more~~TRACER ~~new~~1000 units sold compared to the prior year.

Cost of Revenue and Gross Profit – ~~Cost~~Gross ofprofit ~~revenue~~ is comprised of ~~labor,~~revenue ~~materials,~~less ~~shipping,~~cost ~~warranty~~of ~~reserve,~~revenue. ~~and~~Our ~~overhead~~cost ~~allocation related to the sale~~ of ~~TRACER~~revenue ~~1000~~include ~~units.~~materials, ~~Gross~~overhead, ~~profit~~warranty isexpenses, ~~comprised~~shipping, ofand ~~revenue less cost of revenue~~labor. Cost of revenue ~~increased~~ decreased $~~469~~339 thousand, or ~~105~~37.61%, for the fiscal year ended June 30, ~~2024~~2025, compared to the year ended June 30, ~~2023~~2024, primarily due to the ~~increase~~ decrease in ~~sold~~TRACER 1000 units sold. Gross profit ~~increased~~decreased $~~445~~276 thousand, ~~or 145.4%,~~ and gross margin increased toslightly by 0.2% to 45.13% during the fiscal year ended June 30, ~~2024~~2025, compared to 4045.81% for the fiscal year ended June 30, ~~2023,~~2024. ~~due~~The todevice sales in fiscal year 2025 had a higher ~~proportion~~margin ofcompared ~~recurring~~to ~~revenue~~the device sales in fiscal year 2024 which resulted in an increase in gross margin.

Operating Expenses – Our operating expenses increased $21.72 million, or 238.4%, during the fiscal year ended June 30, ~~2024~~2025, compared to the fiscal year ended June 30, ~~2023~~2024. Significant changes to operating expenses include the following:

• Selling, General and Administrative Expenses – Our selling, general and administrative expenses ~~increased~~decreased by $~~1.5~~174 ~~million~~thousand, or 252.4%, for the year ended June 30, ~~2024~~2025, compared to the year ended June 30, ~~2023.~~2024, ~~This~~primarily is due to ana ~~increase~~decrease in personnel ~~costs,~~cost ~~sales-related expenses, public company expenses,~~ and ~~depreciation~~consulting fees.

• Research and Development Expenses – Research and development expenses increased $1.24 million, or 2119.49%. This increase was largely driven by ~~increases~~increased inspending ~~personnel~~on ~~count~~contractors and employees to support the development of our mass spectrometry ~~offering~~and gas chromatography offerings and expenses related to cross-platform improvements to our technology.

Other income and expense, net – Other income and expense, ~~net for~~decreased ~~the~~by ~~year~~approximately ~~ended~~decreased ~~June~~by ~~30,~~approximately ~~2024~~$730 thousand, ~~was~~or $145.62%, ~~million of income~~ compared ~~$1.4~~ ~~million of~~to ~~income for~~ the ~~year~~prior ~~ended June 30~~period, ~~2023.~~due ~~The~~to ~~increase~~less ~~was driven by more income earned on short-term, capital-preservation~~ investments asearning interest ~~rates have increased and a reduction of interest expense from the payment of related party notes~~income.

Income Taxes – ~~Our~~For ~~income tax expense increased $2 thousand for~~ the fiscal year ended June 30, ~~2024~~2025, ~~compared~~income totaxes ~~the~~were ~~year~~consistent ~~ended June~~with ~~30,~~prior ~~2023~~year.

50 55

Table of Contents

LIQUIDITY AND CAPITAL RESOURCES

Sources of Liquidity

~~During~~Cash ~~the~~and ~~fiscal~~cash ~~year~~equivalents ~~2021~~at June 30, we2025 ~~successfully~~were ~~completed~~$3.1 million as compared to cash and cash equivalents of $10.4 million at June 30, 2024. Historically, the Company has financed its operations through the successful completions of several public offerings of our common stock, raising net proceeds of approximately $67.6 million ~~which will be used to satisfy our short-term and long-term capital needs~~. We expect that our short-term and long-term liquidity requirements will consist of working capital and general corporate expenses associated with the growth of our business, including, without limitation, expenses associated with scaling up our operations and continuing to increase our manufacturing capacity, sales and marketing expense associated with rollout of our products to commercial customers, additional research and development expenses associated with expanding our product offerings, and expenses associated with being a public company. Our short-term capital expenditure needs relate primarily to the expansion of our research and development capabilities and optimization of existing business processes. We believe that our cash and cash equivalents and investments will enable us to fund our operating expenses and capital expenditure requirements for at least twelve months following the date these consolidated financial statements are issued. Our short-term investments have been utilized as a source of liquidity to fund our operating expenses.

Funding Requirements

We expect our expenses to increase in connection with our ongoing activities, particularly as we continue our research and development efforts and expand our business efforts. Furthermore, we have incurred and will continue to incur additional costs as a result of being a public company. Accordingly, we will need to obtain additional funding in connection with our continuing operations. If we are unable to raise capital when needed or on attractive terms, we would be forced to delay, reduce or eliminate our research and development programs, or future commercialization efforts.

Because of the numerous risks and uncertainties associated with our research and development efforts, we are unable to estimate the exact amount of our operating capital requirements. Our future capital requirements will depend on many factors, including:

●

future research and development efforts;

●

our ability to enter into and terms and timing of any collaborations, licensing agreements, or other arrangements;

●

the costs of sales, marketing, distribution and manufacturing efforts;

●

our headcount growth and associated costs as we expand our business;

●

the costs of preparing, filing and prosecuting patent applications, maintaining and protecting our intellectual property rights and defending against intellectual property related claims; and

●

the costs of operating as a public company.

Until such time, if ever, as we can generate positive cash flows from operations, we expect to finance our additional cash needs through a combination of equity offerings, debt financing, equity financing, merging, or engaging in a strategic partnership. To the extent that we raise additional capital through the sale of equity, our existing stockholders will be diluted, and the terms of those securities may include liquidation or other preferences that adversely affect the rights of holders of common stock. Debt financing, if available, may involve agreements that include covenants limiting or restricting our ability to take specific actions, such as incurring additional debt, making capital expenditures or declaring dividends.

If we raise funds through additional strategic alliances or licensing arrangements with third parties, we may have to relinquish valuable rights to our technologies or future revenue streams or to grant licenses on terms that may not be favorable to us. If we are unable to raise additional funds through equity offerings, debt financing, equity financing or engaging in a strategic partnership, we may be required to delay, limit, or reduce our expansion efforts.

Trends and Uncertainties

~~During~~Inflation ~~the~~and ~~COVID-19~~changing ~~pandemic~~prices wehave ~~encountered~~not ~~delays~~had ~~with~~a ~~respect~~material toimpact ~~the~~on ~~TSA certification processes for~~ our ~~products~~historical ~~and~~results ~~throughout~~of ~~our supply chain, particularly due to the global semiconductor and electronics shortage~~operations. We ~~believe~~do ~~such~~not ~~delays~~currently ~~caused~~anticipate ~~product~~that ~~pricing~~ inflation, ~~including increased costs for raw materials~~ and ~~shipping.~~changing Inprices ~~addition,~~will ~~although~~have ~~passenger~~a ~~demand~~material ~~for~~impact ~~air~~on ~~travel~~our ~~has~~future ~~rebounded,~~results ~~the overall recovery~~ of ~~the airline industry and ancillary services remains uncertain~~operations.

Table of Contents

We continue to manage production, to secure alternative supplies, and to take other proactive actions. We believe that we will be able to pass on pricing inflation to our customers by increasing the price of our instruments. If supply chain shortages become more severe or longer term in nature, our business and results of operations could be adversely impacted and do not expect inflation to materially adversely affect our liquidity position. In addition, the long-term impact of the COVID-19 pandemic on our business may not be fully reflected until future periods.

Consolidated Balance Sheet

Total assets for the year ended June 30, ~~2024~~2025, were $38 27 million compared to total assets of $4838 million as of the end of fiscal year ~~2023~~2024, a decrease of $10.0 7 million. The following table sets forth the significant components of the consolidated balance sheet as of June 30, ~~2024~~2025, compared with June 30, ~~2023~~2024:

	Years Ended June 30,
(In thousands)	~~2024~~2025		~~2023~~2024		Variance
Assets:
Current assets	$	3421,~~728~~975	$	4434,~~713~~728	$	(912,~~985~~753	)
Property and equipment, net		2,~~763~~443		2,~~670~~763		93(320	)
Operating lease right-of-use assets, net		~~119~~2,225		~~262~~119		~~(143~~2,106	)
Other assets, net		30346		30		—316
Total	$	3726,~~640~~989	$	4737,~~675~~640	$	(10,~~035~~651	)
Liabilities and stockholders’ equity:
Current liabilities	$	2,~~528~~451	$	2,~~665~~528	$	(~~137~~77	)
Other liabilities, net of current portion		305		291		14
Lease liabilities, net		2,274		73		2,201
Stockholders’ equity		34,807		44,719		(9,912	)
Other liabilities, net		164		232		(68	)
Total	$	37,640	$	47,675	$	(10,035	)
Stockholders’ equity		22,100		34,807		(12,707	)
Total	$	26,989	$	37,640	$	(10,651	)

Current assets – Current assets decreased $1012.8 million as of June 30, ~~2024~~2025, compared to June 30, ~~2023~~2024, as a result of cash used for continuing operating expenses and personnel ~~cost~~costs.

Property and equipment, net – Property and equipment, net of depreciation, ~~increased~~decreased $93320 thousand as of June 30, ~~2024~~2025, compared to June 30, ~~2023~~2024, primarily due to ~~the~~depreciation ~~acquisition of third party equipment~~ and ~~the~~an ~~use of additional TRACER 1000 units for research and development~~asset impairment.

Operating lease right-of-use assets, net – Operating lease right-of-use assets ~~decreased~~increased $~~143~~2.1 ~~thousand~~million as of June 30, ~~2024~~2025, compared to June 30, ~~2023~~2024, due to entering into the Metric ~~amortization~~facility lease.

Other assets, net – Other assets ~~were consistent~~increased ~~with~~by $316 thousand during the ~~prior~~fiscal year due to the lease deposit paid for the Metric facility.

Current liabilities – Current liabilities ~~decreased~~were ~~$137~~consistent ~~thousand~~with ~~as of June 30, 2024, compared to June 30, 2023 due~~ the ~~decrease~~prior ~~in accounts payables and accrued expenses and other liabilities being partially offset by increases in accruals related to personnel costs~~year.

~~Other~~ Lease liabilities, net ~~of current portion~~ – ~~Other~~ Lease liabilities, ~~net of current portion~~ increased $142.2 ~~thousand~~ million as of June 30, ~~2024~~2025, compared to June 30, ~~2023~~ 2024, due to ~~the~~ ~~increases~~entering ininto ~~our warrant reserve and financing obligations in connection with internal-use software were partially offset by~~ the ~~amortization~~Metric offacility lease ~~liabilities~~.

52 Other liabilities, net – Other liabilities were consistent with the prior year.

Table of Contents

Cash Flows

The following is a summary of the change in our cash and cash equivalents:

Years Ended June 30,

(In thousands)

~~2024~~2025

~~2023~~2024

Variance

Change in cash and cash equivalents:

Net cash used in operating activities

(912,~~725~~952

)

(79,~~625~~725

)

(23,~~100~~227

)

Net cash provided by (used in) investing activities

65,~~140~~795

(36,~~844~~140

)

~~9,984~~(345

)

Net cash used in financing activities

(~~181~~185

)

(~~776~~181

)

~~595~~(4)

Net change in cash and cash equivalents

(37,~~766~~342

)

(123,~~245~~766

)

8(3,~~479~~576

)

Cash and Cash Equivalents

At June 30, ~~2024~~2025, we held cash and cash equivalents of $103.41 million, and our net working capital was approximately $3219.2 5 million. At June 30, ~~2023~~2024, we held cash and cash equivalents of $1410.24 million, and our net working capital was approximately $4232.1 2 million. Cash and cash equivalents decreased by approximately $313.87 million during the year ended June 30, ~~2024~~2025, due to funding our continuing operating expenses,. The ~~partially~~Company ~~offset~~has by$15.1 ~~the~~million ~~proceeds of~~ in short- term investments to fund operations.

Operating Activities

Net cash used in operating activities was $913.7 0 million for the year ended June 30, ~~2024~~2025, compared to cash used in operating activities of $79.67 million for the year ended June 30, ~~2023~~2024. ~~This~~The increase in cash was ~~caused~~due by increases in recurring operating expenses and accounts payable~~, partially offset by a decrease in accounts receivables and increase in depreciation~~.

Investing Activities

Net cash ~~provided by (~~used in) investing activities for the year ended June 30, ~~2024,~~2025 ~~increased~~was $105.~~0 million to~~8 ~~$6.1~~ million, compared to ~~net cash used in investing activities of~~ $36.81 million in the year ended June 30, ~~2023~~2024. The ~~increase~~decrease in cash provided by investing activities ~~was~~ due to purchasing of property, plant, and equipment, offset by the proceeds of short-term investments.

Financing Activities

Cash used in financing activities was $~~181~~185 thousand for the year ended June 30, ~~2024~~2025, and $~~776~~181 thousand for the year ended June 30, ~~2023~~2024. The decrease was due to repayment of ~~related~~finance ~~party debt in fiscal year 2023 (see below) and no repurchase of treasury shares in fiscal year 2024~~leases.

We did not have any material off-balance sheet arrangements as of June 30, ~~2024~~2025.

~~Related-party Debt~~ 58

On September 5, 2019, the Company entered into a private placement transaction with Thomas B. Pickens III, the Chief Executive Officer and Chairman of the Board of Directors of the Company, for the issuance and sale of a secured promissory note to Mr. Pickens with a principal amount of $1.5 million (the “2019 Note”), and on February 13, 2020, the Company entered into a second private placement transaction with Mr. Pickens for the issuance and sale of a second secured promissory note to Mr. Pickens with a principal amount of $1.0 million (the “2020 Note” and, collectively with the 2019 Note, the “Original Notes”). Interest on the Original Notes accrued at 11% per annum. The principal amount and accrued interest on the Original Notes originally were to become due and payable on September 5, 2020; however, on August 24, 2020, the Company and Mr. Pickens agreed to extend the date of maturity of the Original Notes and payment of accrued interest to September 5, 2021 (the “Extended Maturity Date”). The Company had the option to prepay the principal amount and all accrued interest on the Original Notes at any time prior to the Extended Maturity Date.

Table of Contents

In connection with the issuance of the Original Notes, the Company, along with 1st Detect Corporation and Astrotech Technologies, Inc. (the “Subsidiaries”), entered into two security agreements, dated as of September 5, 2019 and February 13, 2020 (collectively, the “Original Security Agreements”), with Mr. Pickens, pursuant to which the Company and the Subsidiaries granted to Mr. Pickens a security interest in all of the Company’s and the Subsidiaries’ Collateral, as such term is defined in the Original Security Agreements. In addition, the Subsidiaries jointly and severally agreed to guarantee and act as surety for the Company’s obligation to repay the Original Notes pursuant to a subsidiary guarantee.

On September 3, 2021, the Company entered into (1) the Omnibus Amendment to the Secured Promissory Notes (the “Amended Notes”) with Mr. Pickens, in connection with the Original Notes, and (2) the Omnibus Amendment to the Security Agreements (the “Amended Security Agreements”, and together with the Amended Notes, the “Amendments”) with the Subsidiaries, in connection with the Original Security Agreements. Pursuant to the Amendments, (a) the principal amount of $1.0 million and accrued interest of $172 thousand on the 2020 Note was paid in full and the 2020 Note was canceled, and (b) $1.0 million of the principal amount and $330 thousand of accrued interest on the 2019 Note was paid and the maturity date on the remaining balance of $500 thousand of the 2019 Note was extended to September 5, 2022 (the “Amended Maturity Date”).

In addition, the Subsidiaries jointly and severally agreed to guarantee and act as surety for the Company’s obligation to repay the remaining balance on the 2019 Note pursuant to subsidiary guarantees, dated September 5, 2019 and February 13, 2020, as amended by the Omnibus Amendments to Subsidiary Guarantees, dated August 24, 2020 and September 3, 2021, respectively (the Omnibus Amendment to Subsidiary Guarantees dated September 3, 2021, the “Amended Subsidiary Guarantee”). The Subsidiary Guarantee with respect to the 2020 Note was also canceled by the Amended Subsidiary Guarantee due to the 2020 Note being repaid in full.

On September 5, 2022, the secured promissory issued by the Company on September 5, 2019 (the “2019 Note”) to Thomas B. Pickens III, the Chief Executive Officer and Chairman of the Board of Directors of the Company, matured. On the maturity date, the remaining outstanding principal amount of $500 thousand and accrued interest of $55 thousand on the 2019 Note was paid in full and the 2019 Note was canceled. With the cancelation of the 2019 Note, the Amended Subsidiary Guarantee was terminated and the Subsidiaries’ Collateral was released. Refer to Note 7 of our Annual Report on Form 10-K for 2023 for more detailed information on the 2019 Note.

In addition, the Subsidiaries jointly and severally agreed to guarantee and act as surety for the Company’s obligation to repay the remaining balance on the 2019 Note pursuant to subsidiary.

Contractual Obligations and Commitments

The following table summarized our commitments to settle contractual obligations as of June 30, ~~2024~~2025:

	Payments Due by Period
(In thousands)	Total		Less than 1 Year		1 to 3 Years		4 to 5 Years		More than 5 Years
Operating lease commitments (1)	$	~~142~~3,113	$	~~142~~381	$	—807		—868		—1,057
Finance lease commitments (2)		~~173~~79		9427		7952		—-		—
Total	$	~~315~~3,192	$	~~236~~408	$	79859	$	—868	$	—1,057

(1) Consists of payments due for our ~~leases~~ lease of ~~research~~the ~~and~~manufacturing ~~development space~~ property in Austin, Texas that ~~expires~~expire ~~April 2025~~November 2032.

(2) Consists of payments due for ~~our leases of three~~an ~~pieces of~~ equipment lease that expire ~~between December 2024 and~~ May 2028.

Off-Balance Sheet Arrangements

We did not have any off-balance sheet arrangements as of June 30, ~~2024~~2025.

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

Not applicable to smaller reporting companies.

54 59

Table of Contents

Item 8. Financial Statements and Supplementary Data

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and

Stockholders of Astrotech Corporation

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated balance ~~sheet~~sheets of Astrotech Corporation (the “Company”) as of June 30, 2025 and 2024, and the related consolidated statements of operations and comprehensive loss, changes in stockholders’ equity, and cash flows for each of the years in the two-year period ended June 30, ~~2024~~2025, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of June 30, 2025 and 2024, and the results of its operations and its cash flows for the ~~year~~years ended June 30, 2025 and 2024, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audit. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audit, we are required to obtain an understanding of internal control over financial reporting, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audit included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audit also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audit provides a reasonable basis for our opinion.

Critical Audit Matters

The critical audit matters communicated below are matters arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matters below, providing separate opinions on the critical audit matters or on the accounts or disclosures to which they relate.

We determined that there are no critical audit matters.

RBSM LLP ~~Austin~~Houston, Texas

We have served as the Company's auditor since 2023.

September 2026, ~~2024~~2025

PCAOB ID Number 587

5560

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Stockholders

Astrotech Corporation

Austin, Texas

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated balance sheet of Astrotech Corporation and subsidiaries (the "Company") as of June 30, 2023, the related consolidated statements of operations and comprehensive loss, changes in stockholders' equity, and cash flows for the year then ended, and the related notes (collectively referred to as the "consolidated financial statements"). In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company as of June 30, 2023, and the results of its operations and cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's consolidated financial statements based on our audit. We are a public accounting firm registered with the Public Company Accounting Oversight Board ("PCAOB") and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. Our audit included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audit also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audit provides a reasonable basis for our opinion.

Armanino LLP Dallas, Texas

We have served as the Company's auditor since 2019. In 2023, we became the predecessor auditor.

September 28, 2023

PCAOB ID Number 83

Table of Contents

ASTROTECH CORPORATION

Consolidated Balance Sheets

(In thousands, except share and per share data)

	June 30,
	2024			2023
	2025			2024
Assets
Current assets
Cash and cash equivalents	$	103,~~442~~100		$	1410,~~208~~442
Short-term investments		2115,~~474~~108			2721,~~919~~474
Accounts receivable		77485			~~225~~77
Inventory, net:
Raw materials		2,~~038~~194			12,~~379~~038
Work-in-process		66425			~~243~~66
Finished goods		~~370~~310			~~373~~370
Income tax receivable		—			1
Prepaid expenses and other current assets		353			261
Prepaid expenses and other current assets		261			365
Total current assets		21,975			34,728
Total current assets		34,728			44,713
Property and equipment, net		2,395			2,763
Property and equipment, net		2,763			2,670
Intangible assets, net		48			-
Operating lease right-of-use assets, net		~~119~~2,225			~~262~~119
Other assets, net		30346			30
Total assets	$	3726,~~640~~989		$	4737,~~675~~640
Liabilities and stockholders’ equity
Current liabilities
Accounts payable	$	~~373~~1,066		$	~~546~~373
Payroll related accruals		~~1,174~~529			~~633~~1,174
Accrued expenses and other liabilities		~~754~~451			~~1,170~~754
Lease liabilities, current		~~227~~405			~~316~~227
Total current liabilities		2,~~528~~451			2,~~665~~528
Accrued expenses and other liabilities, net of current portion		~~232~~164			—232
Lease liabilities, net of current portion		732,274			~~291~~73
Total liabilities		24,~~833~~889			2,~~956~~833
Commitments and contingencies (Note 14)
Commitments and contingencies (Note 13)
Stockholders’ equity
Convertible preferred stock, $0.001 par value, 2,500,000 shares authorized; 280,898 shares of Series D issued and outstanding at June 30, 2024 and 2023, respectively		—			—
Convertible preferred stock, $0.001 par value, 2,500,000 shares authorized; 280,898 shares of Series D issued and outstanding at June 30, 2025 and 2024, respectively		-			-
Common stock, $0.001 par value, 250,000,000 shares authorized at June 30, 2024 and 2023 respectively; 1,712,045 and 1,692,045 shares issued at June 30, 2024 and 2023 respectively; 1,701,729 and 1,681,729 outstanding at June 30, 2024 and 2023, respectively		190,643			190,643
Common stock, $0.001 par value, 250,000,000 shares authorized at June 30, 2025 and 2024 respectively; 1,769,269 and 1,712,045 shares issued at June 30, 2025 and 2024 respectively; 1,758,953 and 1,701,729 shares outstanding at June 30, 2025 and 2024, respectively		190,643			190,643
Treasury shares, 10,316 shares at June 30, 2024 and 2023		(119	)		(119	)
Treasury shares, 10,316 shares at June 30, 2025 and 2024, respectively		(119	)		(119	)
Additional paid-in capital		8283,~~480~~310			8182,~~002~~480
Accumulated deficit		(~~237~~250,~~020~~870	)		(~~225~~237,~~354~~020	)
Accumulated other comprehensive loss		(~~1,177~~864	)		(1,~~453~~177	)
Total stockholders’ equity		3422,~~807~~100			4434,~~719~~807
Total liabilities and stockholders’ equity	$	3726,~~640~~989		$	4737,~~675~~640

See accompanying notes to consolidated financial statements.

57 61

Table of Contents

ASTROTECH CORPORATION

Consolidated Statements of Operations and Comprehensive Loss

(In thousands, except per share data)

	June 30,
	2024			2023
	2025			2024
Revenue	$	1,~~664~~049		$	~~750~~1,664
Cost of revenue		~~913~~574			~~444~~913
Gross profit		~~751~~475			~~306~~751
Operating expenses:
Selling, general and administrative		7,~~241~~067			57,~~775~~241
Research and development		68,~~790~~142			56,~~591~~790
Total operating expenses		1415,~~031~~209			1114,~~366~~031
Loss from operations		(1314,~~280~~734	)		(1113,~~060~~280	)
Other income and expense, net		~~1,616~~886			1,~~418~~616
Loss from operations before income taxes		(1113,~~664~~848	)		(911,~~642~~664	)
Income tax expense		(2	)		—(2	)
Net loss	$	(1113,~~666~~850	)	$	(911,~~642~~666	)
Weighted average common shares outstanding:
Basic and diluted		1,~~638~~665			1,~~620~~638
Basic and diluted net loss per common share:
Net loss per common share	$	(78.1232	)	$	(57.9512	)
Other comprehensive loss, net of tax:
Net loss	$	(1113,~~666~~850	)	$	(911,~~642~~666	)
Available-for-sale securities:
Net unrealized gain (loss)		276			(254	)
Net unrealized gain		313			276
Total comprehensive loss	$	(1113,~~390~~537	)	$	(911,~~896~~390	)

See accompanying notes to consolidated financial statements.

58 62

Table of Contents

ASTROTECH CORPORATION

Consolidated Statement of Changes in Stockholders’ Equity

(In thousands)

	Preferred Stock				Common Stock
	Class D
	Number of Shares Outstanding		Amount		Number of Shares Outstanding			Amount		Treasury Stock Amount			Additional Paid-In Capital		Accumulated Deficit			Accumulated Other Comprehensive Loss			Total Stockholders’ Equity
Balance at June 30, 2022		281	$	—		1,686		$	190,642	$	—		$	79,505	$	(215,712	)	$	(1,199	)	$	53,236
Balance at June 30, 2023		281	$	-		1,682		$	190,643	$	(119	)	$	81,002	$	(225,354	)	$	(1,453	)	$	44,719
Net change in available-for-sale marketable securities		—-		—-		—-			—-		—-			—-		—-			~~(254~~276	)		~~(254~~276	)
Stock-based compensation		—-		—-		4-			1-		—-			1,~~497~~478		—-			—-			1,~~498~~478
Restricted stock issuance		—-		—-		220			—-		—-			—-		—-			—-			—-
Purchase of treasury stock		—-		—-		~~(10~~-	)		—-		~~(119~~-	)		—-		—-			—-			~~(119~~-	)
Net loss		—-		—-		—-			—-		—-			—-		(911,~~642~~666	)		—-			(911,~~642~~666	)
Balance at June 30, 2023		281	$	—		1,682			190,643		(119	)		81,002		(225,354	)		(1,453	)		44,719
Balance at June 30, 2024		281	$	-		1,702			190,643		(119	)		82,480		(237,020	)		(1,177	)		34,807
Net change in available-for-sale marketable securities		—-		—-		—-			—-		—-			—-		—-			~~276~~313			~~276~~313
Restricted stock issuance		—		—		20			—		—			—		—			—			—
Stock-based compensation		-		-					-		-			830		-			-			830
Stock-based compensation		—		—		—			—		—			1,478		—			—			1,478
Restricted stock issuance		-		-		65			-		-			-		-			-			-
Net loss		—		—		—			—		—			—		(11,666	)		—			(11,666	)
Cancellation of restricted stock		-		-		(8	)		-		-			-		-			-			-
Balance at June 30, 2024		281	$	—		1,702		$	190,643	$	(119	)	$	82,480	$	(237,020	)	$	(1,177	)	$	34,807
Net loss		-		-		-			-		-			-		(13,850	)		-			(13,850	)
Balance at June 30, 2025		281	$	-		1,759		$	190,643	$	(119	)	$	83,310	$	(250,870	)	$	(864	)	$	22,100

See the accompanying notes to consolidated financial statements.

59 63

Table of Contents

ASTROTECH CORPORATION

Consolidated Statements of Cash Flows

(In thousands)

	Years Ended June 30,
	2024			2023
	2025			2024
Cash flows from operating activities:
Net loss	$	(1113,~~666~~850	)	$	(911,~~642~~666	)
Adjustments to reconcile net loss to net cash used in operating activities:
Stock-based compensation		~~1,478~~830			1,~~498~~478
Depreciation		~~731~~962			~~366~~731
Amortization of operating lease right-of-use assets		~~143~~194			~~123~~143
Interest on financing leases		135			1513
Loss on disposal of asset		—294			25-
Changes in assets and liabilities:
Changes in assets and liabilities
Accounts receivable		~~148~~(408	)		~~(169~~148	)
Contract asset		—			2
Inventory, net		(455	)		(479	)
Inventory, net		(479	)		(477	)
Accounts payable		693			(173	)
Income tax receivable		—			(1	)
Other assets and liabilities		(1,387	)		246
Accounts payable		(173	)		377
Income taxes payable		-			1
Other assets and liabilities		246			390
Repayment of financing liability in connection with internal-use software		-			(14	)
Income taxes payable		1			(2	)
Operating lease liabilities		170			(153	)
Repayment of financing liability in connection with internal-use software		(14	)		—
Net cash used in operating activities		(12,952	)		(9,725	)
Operating lease liabilities		(153	)		(130	)
Net cash used in operating activities		(9,725	)		(7,625	)
Cash flows from investing activities:
Purchases of property and equipment		(~~579~~833	)		(~~1,844~~579	)
Purchases of short-term investments		—			(5,140	)
Purchases of intangible assets		(50	)		-
Proceeds from short-term investments		6,~~719~~678			36,~~140~~719
Net cash provided by (used in) investing activities		65,~~140~~795			(36,~~844~~140	)
Cash flows from financing activities:
Purchase of treasury shares		—			(119	)
Repayment of financing liability in connection with internal-use software		(91	)		-
Repayment of related-party debt		—			(500	)
Repayments on finance lease liabilities		(94	)		(181	)
Repayments on finance lease liabilities		(181	)		(157	)
Net cash used in financing activities		(185	)		(181	)
Net cash used in financing activities		(181	)		(776	)
Net change in cash and cash equivalents	$	(7,342	)	$	(3,766	)
Net change in cash and cash equivalents	$	(3,766	)	$	(12,245	)
Cash and cash equivalents at beginning of period		10,442			14,208
Cash and cash equivalents at beginning of period		14,208			26,453
Cash and cash equivalents at end of period	$	3,100		$	10,442
Cash and cash equivalents at end of period	$	10,442		$	14,208
Supplemental disclosures of cash flow information:
Cash paid for interest	$	26		$	69
Cash financing activities:
Acquisition of equipment/ software through financing lease	$	245		$	119
Cash paid for interest	$	11		$	26
Operating right-of-use assets and associated liabilities	$	—		$	223
Income taxes paid	$	-		$	2
Income taxes paid	$	2		$	2
Non-cash financing activities:
Operating right-of-use interest	$	10		$	-
Finance lease expenditures incurred but not paid for as of the end of the period	$	7		$	-
Acquisition of equipment/ software through financing lease	$	-		$	245
Operating right-of-use assets	$	2,277		$	-
Operating right-of-use associated liabilities	$	2,594		$	-

See accompanying notes to consolidated financial statements.

60 64

Table of Contents

ASTROTECH CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Years Ended June 30, ~~2024~~2025 and ~~2023~~2024

(1) Description of the Company and Operating Environment

Business Overview

The terms “Astrotech”, “the Company”, “we”, “us”, or “our” refer to Astrotech Corporation (Nasdaq: ASTC), a Delaware corporation organized in 1984. We are commercializing the Astrotech Mass Spectrometer Technology™ platform (“AMS Technology”) through application specific, wholly owned subsidiaries.

Astrotech Technologies, Inc.

Astrotech Technologies, Inc. (“ATI”) owns and licenses the AMS Technology, the platform MS technology originally developed by 1st Detect. The AMS Technology has been designed to be inexpensive, smaller, and easier to use when compared to traditional mass spectrometers. Unlike other technologies, the AMS Technology works under ultra-high vacuum, which eliminates competing molecules, yielding higher resolution and fewer false alarms. The intellectual property includes 17 patents granted along with extensive trade secrets. With a number of diverse market opportunities for the core technology, ATI is structured to license the intellectual property for different fields of use. ATI currently licenses the AMS Technology to four wholly-owned subsidiaries of Astrotech on an exclusive basis.

1st Detect Corporation

1st Detect Corporation (“1^st Detect”), a licensee of ATI for security and detection applications, has developed the TRACER 1000, the world’s first MS based ETD certified by the ECAC and approved by TSA for air cargo. The TRACER 1000 was designed to outperform the ETDs currently used at airports, cargo and other secured facilities, and borders worldwide. The Company believes that ETD customers are unsatisfied with the currently deployed ETD technology, which is driven by ion mobility spectrometry (“IMS”). The Company further believes that some IMS-based ETDs have issues with false positives, as they often misidentify personal care products and other common household chemicals as explosives, causing facility shutdowns, unnecessary delays, frustration, and significant wasted security resources. In addition, there are hundreds of different types of explosives, but IMS-based ETDs have a very limited threat detection library reserved only for those few explosives of largest concern. Adding additional compounds to the detection library of an IMS-based ETD fundamentally reduces the instrument’s performance, further increasing the likelihood of false alarms. In contrast, adding additional compounds to the TRACER 1000’s detection library does not degrade its detection capabilities, as it has a virtually unlimited and easily expandable threat library.

AgLAB Inc.

AgLAB Inc. (“AgLAB”), an exclusive licensee of ATI for the use in the agriculture industry to analyze complex chemical compounds found in organic plant material and extracts, has developed the AgLAB 1000™ series of mass spectrometers for use in the hemp and cannabis markets with the initial focus on optimizing yields in the distillation process. The AgLAB product line is a derivative of the Company’s core AMS Technology. AgLAB continues to conduct field trials demonstrating that the AgLAB 1000-D2™ can be used in the distillation process to significantly improve the yields of tetrahydrocannabinol (“THC”) and cannabidiol (“CBD”) oil during distillation. The AgLAB 1000-D2™ uses the Maximum Value Process solution (“MVP”) to analyze samples in real-time and assist the equipment operator determining the ideal settings required to maximize yields.

Table of Contents

BreathTech Corporation

BreathTech Corporation (“BreathTech”), an exclusive licensee of ATI for use in breath analysis applications, iswas in the process of developing the BreathTest-1000™, a breath analysis tool to screen for VOC metabolites found in a person’s breath that could indicate they may have compromised condition ~~including but not limited to a bacterial or viral infection~~. ~~The Company believes that new tools to quickly identify the presence of a VOC metabolite could play an important role in detecting and containing airborne diseases.~~

Table of Contents

Pro-Control, Inc.

~~On December~~The ~~12,~~company ~~2023, we~~ announced the formation of our new wholly-owned subsidiary, Pro-Control, Inc. (“Pro-Control”), and ATI’s entry into an exclusive license with Pro-Control to utilize our AMS Technology for industrial process control applications involving chemical distillation outside of the agriculture industry. Pro-Control uses advanced mass spectrometer instrumentation to monitor and control the production and operations of manufacturing processes using real-time, in-process samples. Pro-Control provides the vital spectral qualitative and quantitative data needed to control the production parameters (temperatures, flow, speed, pressure) while significantly improving efficiency.

EN-SCAN, Inc.

EN-SCAN, Inc. (“EN-SCAN”) is developing advanced environmental testing and monitoring solutions, integrating gas chromatography and mass spectrometry technology in rugged, portable designs. EN-SCAN’s products are expected to support industrial, environmental, and regulatory applications, helping organizations meet compliance requirements and environmental safety. EN-SCAN will use proprietary ATi Gas Chromatograph and AMS Technology license from ATI for instant feedback to accurately detect soil, water, and air contamination source location and migration.

(2) Summary of Significant Accounting Policies

Principles of Consolidation and Basis of Presentation

The preparation of these consolidated financial statements in conformity to U.S. Generally Accepted Accounting Principles (“GAAP”) for the accounts of Astrotech Corporation and all its wholly owned subsidiaries requires management to make judgments and estimates and form assumptions that affect the reported amounts of assets and liabilities at the date of the consolidated financial statements and reported amounts of revenues and expenses during the reporting period. Estimates and underlying assumptions are reviewed on an ongoing basis. Actual outcomes may differ from these estimates under different assumptions and conditions. All intercompany transactions have been eliminated in consolidation. Certain prior year amounts have been reclassified to conform to the current year presentation and have had no impact on net income or stockholders' equity.

Segment Information

The Company has determined that it does not meet the criteria of Accounting Standards Codification (“ASC”) 280 “Segment Reporting”. Management has concluded that our chief operating decision maker (“CODM”) is our chief executive officer. The Company’s CODM reviews the entire organization’s consolidated results as a whole on a monthly basis to evaluate performance and make resource allocation decisions. Management views the Company’s operations and manages its business as one operating segment.

Revenue Recognition

Astrotech recognizes revenue employing the generally accepted revenue recognition methodologies described under the provisions of Accounting Standards Codification ("ASC") Topic 606 “Revenue from Contracts with Customers” (“Topic 606”). The methodology used is based on contract type and how products and services are provided. The guidelines of Topic 606 establish a five-step process to govern the recognition and reporting of revenue from contracts with customers. The five steps are: (i) identify the contract with a customer, (ii) identify the performance obligations within the contract, (iii) determine the transaction price, (iv) allocate the transaction price to the performance obligations within the contract, and (v) recognize revenue when or as the performance obligations are satisfied.

An additional factor is reasonable assurance of collectability. This necessitates deferral of all or a portion of revenue recognition until assurance of collection. During the fiscal year ended June 30, ~~2024~~2025, the Company had ~~three~~four material customers that comprised substantially all of its $1.7 0 million in revenue. During the fiscal year ended June 30, ~~2023~~2024, the Company had ~~four~~ three material customers that consisted substantially all of the $~~750~~1.7 ~~thousand~~million in revenue.

Table of Contents

Revenue from product and services sales are recognized when control of the goods is transferred to the customer which occurs at a point in time typically upon shipment to the customer or completion of the service. This standard applies to all contracts with customers. Warranty obligations associated with the sale of our products are assurance-type warranties that are a guarantee of the product’s intended functionality and, therefore, do not represent a distinct performance obligation within the context of the contract. Warranty expense is included in cost of sales.

Table of Contents

Contract Assets and Liabilities. The Company enters into contracts to sell products and provide services, and it recognizes contract assets and liabilities that arise from these transactions. The Company recognizes revenue and corresponding accounts receivable according to Topic 606 and, at times, recognizes revenue once all performance obligations have been met, in advance of the time when contracts give us the right to invoice a customer. The Company may also receive consideration, per the terms of a contract, from customers prior to transferring goods to the customer. The Company records customer deposits as deferred revenue. Additionally, the Company may receive payments, most typically for service and warranty contracts, at the onset of the contract and before services have been performed. In such instances, the Company records a deferred revenue liability. The Company recognizes these contract liabilities as sales after all revenue recognition criteria are met.

~~Practical~~Revenue ~~Expedients. Under~~under ~~its~~long-term government contracts ~~with~~is ~~customers,~~recorded under the ~~Company~~percentage ~~stands ready to deliver product upon receipt~~ of acompletion ~~purchase order~~method. ~~Accordingly~~Revenue, ~~the~~billable ~~Company has no performance obligations~~ under ~~its~~cost-plus-fixed-fee contracts, ~~until~~is ~~its~~recorded ~~customers~~as ~~submit~~costs aare ~~purchase~~incurred ~~order.~~and ~~The~~includes ~~Company~~estimated ~~does~~earned ~~not~~fees ~~enter~~in ~~into~~the ~~commitments~~proportion tothat ~~provide~~costs ~~goods~~incurred orto ~~services~~date ~~that~~bear ~~have~~to ~~terms~~total ~~greater~~estimated ~~than one year~~costs. InCosts ~~limited~~include ~~cases~~direct labor, ~~the~~direct ~~Company~~materials, ~~does~~subcontractor ~~require~~costs ~~payment~~and inmanufacturing ~~advance~~and ofadministrative ~~shipping~~overhead ~~product.~~allowable ~~Typically,~~under ~~product~~the iscontract. ~~shipped~~General ~~within~~and aadministrative ~~few~~expenses ~~days~~allowable ~~after~~under ~~prepayment~~the isterms ~~received.~~of ~~These~~contracts ~~prepayments~~ are ~~recorded~~allocated asper contract, ~~liabilities~~depending on ~~the~~its ~~consolidated~~direct ~~balance~~labor ~~sheet~~ and ~~are~~material ~~included~~proportion into ~~accounts~~total ~~payable~~direct labor and ~~accrued~~material ~~liabilities. As the performance obligation is part~~ of aall ~~contract~~contracts. ~~that~~As ~~has~~contracts ancan ~~original~~extend ~~expected~~over one or ~~duration~~more ofaccounting ~~less than one year~~periods, ~~the~~revisions ~~Company~~in ~~has~~earnings ~~applied~~estimated ~~the~~during ~~practical expedient to omit disclosures regarding remaining performance obligations. In cases where~~ the ~~Company~~course isof ~~responsible~~work ~~for~~are ~~shipping~~reflected ~~after~~during the ~~customer~~accounting ~~has~~period ~~obtained~~in ~~control~~which of the ~~goods,~~facts itbecome ~~has elected to treat the shipping activities as fulfillment activities rather than as a separate performance obligation~~known. The Company ~~also~~does not generally ~~applies~~provide aan ~~practical~~allowance ~~expedient~~for toreturns ~~expense~~from ~~direct~~our ~~costs~~government ofcustomers ~~obtaining a contract when incurred~~ because ~~the~~our ~~amortization~~customer ~~period~~agreements ~~would~~do not provide ~~have~~for ~~been~~a ~~one~~right ~~year~~of ~~or less~~return.

Practical Expedients. Under its contracts with customers, the Company stands ready to deliver product upon receipt of a purchase order. Accordingly, the Company has no performance obligations under its contracts until its customers submit a purchase order. The Company does not enter into commitments to provide goods or services that have terms greater than one year. In limited cases, the Company does require payment in advance of shipping product. Typically, product is shipped within a few days after prepayment is received. These prepayments are recorded as contract liabilities on the consolidated balance sheet and are included in accounts payable and accrued liabilities. As the performance obligation is part of a contract that has an original expected duration of less than one year, the Company has applied the practical expedient to omit disclosures regarding remaining performance obligations. In cases where the Company is responsible for shipping after the customer has obtained control of the goods, it has elected to treat the shipping activities as fulfillment activities rather than as a separate performance obligation. The Company also applies a practical expedient to expense direct costs of obtaining a contract when incurred because the amortization period would have been one year or less.

Product Sales. The Company recognizes revenue from sales of products upon shipment or delivery when control of the product transfers to the customer, depending on the terms of each sale, and when collection is probable. In the circumstance where terms of a product sale include subjective customer acceptance criteria, revenue is deferred until the Company has achieved the acceptance criteria unless the customer acceptance criteria are perfunctory or inconsequential. The Company generally offers customers payment terms of 60 days or less.

Freight. The Company records shipping and handling fees that it charges to its customers as revenue and related costs as cost of goods sold.

Multiple Performance Obligations. Certain agreements with customers include the sale of equipment involving multiple elements in cases where obligations in a contract are distinct and thus require separation into multiple performance obligations, revenue recognition guidance requires contract consideration be allocated to each distinct performance obligation based on its relative standalone selling price. In general, our performance obligations are related to the sale of TRACER-1000 systems, training, associated consumables which can be delivered in multiple occurrences, and future maintenance. The value allocated to each performance obligation is then recognized as revenue when the revenue recognition criteria for each distinct promise or bundle of promises has been met.

The standalone selling price for each performance obligation is an amount that depicts the amount of consideration to which the entity expects to be entitled in exchange for transferring the good or service. When there is only one performance obligation associated with a contract, the entire amount of consideration is attributed to that obligation. When a contract contains multiple performance obligations the standalone selling price is first estimated using the observable price, which is generally a list price net of applicable discount or the price used to sell the good or service in similar circumstances. In circumstances when a selling price is not directly observable, the Company will estimate the standalone selling price using information available including our market assessment and expected cost plus margin.

6367

Table of Contents

Foreign Currency

The Company’s international operations are subject to certain opportunities and risks, including from foreign currency fluctuations and governmental actions. During fiscal years ~~2024~~2025 and ~~2023~~2024, the Company conducted business in multiple foreign countries. The Company closely monitors its operations in each country in which it does business and seeks to adopt appropriate strategies that are responsive to changing economic and political environments. The Company currently conducts business in the U.S. dollar and the Euro. Revenues, costs, and expenses are translated at the applicable rate on the date of the transaction. Translation gains and losses, if any, are calculated on accounts receivable or accounts payable outstanding at the rate applicable at the end of the period. The Company includes gains and losses resulting from foreign currency transactions in income, while it excludes those resulting from translation of financial statements from income and includes them as a component of accumulated other comprehensive loss when applicable. Transaction gains and losses, which were included in the Company’s consolidated statements of operations and comprehensive loss, ~~amounted~~were tonot amaterial ~~loss of approximately $1 thousand~~ for the fiscal ~~year~~years ended June 30,2025 ~~2024~~ and ~~$3 thousand for the fiscal year ended~~ June 30, ~~2023~~2024.

Warranty Provision

Astrotech offers its customers warranties on the products that it sells. These warranties typically provide for repairs and maintenance of the products if problems arise during a specified time period after original shipment. Concurrent with the sale of products, the Company records a provision for estimated warranty expenses with a corresponding increase in cost of goods sold. The Company periodically adjusts this provision based on historical experience and anticipated expenses. The Company charges actual expenses of repairs under warranty, including parts and labor, to this provision when incurred. The current obligation for warranty provision is included in accrued expenses and other liabilities in the consolidated balance sheets, whose activity for each of the two fiscal years ended June 30, ~~2024~~2025 and ~~2023~~2024 is summarized in the following table:

(In thousands)	Warranty Provision
Balance as of June 30, 2022	$	50
Balance as of June 30, 2023	$	88
Accruals for new warranties issued		157
Settlements made		(119	)
Balance as of June 30, 2023		88
Accruals for new warranties issued		172
Settlements made		(76	)
Balance as of June 30, 2024	$	184
Accruals for new warranties issued		75
Settlements made		(62	)
Balance as of June 30, 2025	$	197

Segment Reporting

The accounting guidance on Segment Reporting establishes standards for reporting information regarding operating segments in annual financial statements and requires selected information of those segments to be presented in financial statements. Operating segments are identified as components of an enterprise for which separate discrete financial information is available for evaluation by the chief operating decision maker (the Company’s Chief Executive Officer or “CODM”) in making decisions on how to allocate resources and assess performance. Net sales attributed to customers in the United States and foreign countries for the years ended June 30, 2025 and 2024 were as follows:

Revenue by Segment (In thousands)	June 30, 2025		June 30, 2024
United States	$	730	$	-
Foreign Countries		319		1,664
Total Revenue	$	1,049	$	1,664

Product Revenue

(In thousands)	June 30, 2025		June 30, 2024
Product Revenue	$	804	$	1,576
Grant Revenue		115		-
Service Revenue		130		88
Total Revenue	$	1,049	$	1,664

Research and Development

Research and development costs are expensed as incurred. Research and development costs are used to improve system functionality, streamline and simplify the user experience, and extend our capabilities into customer-defined, application-specific opportunities. Research and development expenses for the fiscal years ended June 30, ~~2024~~2025 and ~~2023~~2024 were $6.8 .1 million and $5.6.8 million, respectively.

Net Loss per Common Share

Basic net loss per common share is calculated by dividing net loss by the weighted average number of common shares outstanding during the period. Diluted net loss per common share is the same as basic net loss per common share as the potential dilutive shares are considered to be anti-dilutive. For more information, see Note 1311.

Cash and Cash Equivalents

The Company considers short-term investments with original maturities of three months or less to be cash equivalents. Cash equivalents are comprised primarily of money market and mutual fund investments.

6468

Table of Contents

Accounts Receivable

The carrying value of the Company’s accounts receivable, net of an allowance for doubtful accounts, if any, represents their estimated net realizable value. Astrotech estimates an allowance for doubtful accounts based on type of customer, age of outstanding receivable, historical collection trends, and existing economic conditions. If events or changes in circumstances indicate that a specific receivable balance may be unrealizable, further consideration is given to the collectability of those balances, and the allowance is adjusted accordingly. Receivable balances deemed uncollectible are written off against the allowance. The Company anticipates collecting all unreserved receivables within one year. As of June 30, ~~2024~~2025 and ~~2023~~2024, there was no allowance for doubtful accounts deemed necessary.

Allowance for Credit Losses on Financial Instruments

In accordance with ASC Topic 326 Credit Losses - Measurement of Credit Losses on Financial Instruments (ASC 326), the Company utilizes the current expected credit losses (“CECL”) model to determine an allowance that reflects its best estimate of the lifetime expected credit losses on accounts receivable and deposit, prepayments. The CECL model is prepared after considering historical experience, current conditions, and reasonable and supportable economic forecasts to estimate lifetime expected credit losses. Accounts receivable and deposit, prepayments, and others receivable are written off when deemed uncollectible. The Company has not incurred credit losses in fiscal years ~~2024~~2025 or ~~2023~~2024.

Inventory

The Company computes inventory cost on a first-in, first-out basis, and inventory is valued at the lower-of-cost or net realizable value. The valuation of inventory also requires the Company to estimate obsolete and excess inventory as well as inventory that is not of saleable quality. The Company provides reserves for discontinued, slow-moving and excess inventory based upon historical demand calculations, forecasted usage, estimated customer requirements and product line updates. As of June 30, ~~2024~~2025, and ~~203~~2024, inventory reserves were $~~296~~346 thousand and $~~333~~ 296 thousand, respectively.

Property and Equipment, net

Property and equipment are stated at cost, less accumulated depreciation. All furniture, fixtures, and equipment are depreciated using the straight-line method over the estimated useful lives of the respective assets, which is generally five years. Purchased software is typically depreciated over three years. Leasehold improvements are amortized over the shorter of the useful life of the improvement or the term of the lease. Repairs and maintenance are expensed when incurred.

Internal Use Software

The Company has adopted the provisions of ASC 350-40, Internal-Use Software, and therefore the costs incurred in the preliminary stages of development are expensed as incurred. The Company capitalizes all direct external costs related to software developed or obtained for internal use when management commits to funding the project, the preliminary project stage is completed and when technological feasibility is established. Once a new functionality or improvement is released for operational use, the asset is moved from the property and equipment category “capital improvements in progress” (“CIP”) to a property and equipment asset subject to depreciation. Capitalization of costs ceases when the project is substantially complete and ready for its intended use. Depreciation is applied using the straight-line method over the estimated useful lives of the assets once the assets are placed in service.

Impairment of Long-Lived Assets

The Company continuously evaluates its long-lived assets for impairment to assess whether the carrying amount of an asset may not be recoverable. Our evaluation is based on an assessment of potential indicators of impairment, such as an adverse change in the business climate that could affect the value of an asset, current or forecasted operating or cash flow losses that demonstrate continuing losses associated with the use of an asset, and a current expectation that, more likely than not, an asset will be disposed of before the end of its previously estimated useful life. Recoverability of assets to be held and used is measured by a comparison of the carrying amount of an asset to future undiscounted net cash flows expected to be generated by the asset. If such assets are considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the assets exceeds the fair value of the assets. The Company had an impairment of long-lived assets expense of $197 thousand for the year ended June 30, 2025, related to internal use software. There was no impairment of long -lived assets recorded for fiscal years ended June 30, 2024~~, and 2023~~. Assets to be disposed of are reported at the ~~lower of the~~ carrying amount ~~or fair value less costs to sell~~. Recoverability of long-lived assets is dependent on a number of conditions, including uncertainty about future events and demand for our services.

65 69

Table of Contents

Fair Value of Financial Instruments

Astrotech’s financial instruments consist of cash and cash equivalents, available for sale investments, accounts receivable, accounts payable, and accrued liabilities. Management believes the carrying amounts of these assets and liabilities approximates their fair value due to their liquidity. The Company is required to measure certain assets and liabilities at fair value, either upon initial measurement or for subsequent accounting or reporting. The Company uses fair value extensively, including in the initial measurement of net assets acquired in a business combination and when accounting for and reporting on certain financial instruments. The Company estimates fair value using an exit price approach, which requires, among other things, that it determine the price that would be received to sell an asset or paid to transfer a liability in an orderly market. The determination of an exit price is considered from the perspective of market participants, considering the highest and best use of assets and, for liabilities, assuming the risk of non-performance will be the same before and after the transfer. A single estimate of fair value results from a complex series of judgments about future events and uncertainties and relies heavily on estimates and assumptions. When estimating fair value, depending

• Market approach, which is based on market prices and other information from market transactions involving identical or comparable assets or liabilities.

• Cost approach, which is based on the cost to acquire or construct comparable assets less an allowance for functional and/or economic obsolescence.

• Income approach, which is based on the present value of the future stream of net cash flows

For more information about the Company’s accounting policies surrounding fair value investments, see Note 6.

Available-for-Sale Investments

Investments that are designated as available-for-sale are reported at fair value, with unrealized gains and losses recorded in accumulated other comprehensive loss. The Company determines the cost of investments sold based on a first-in, first-out cost basis at the individual security level. The Company also considers specific adverse conditions related to the financial health of, and the business outlook for, the investee which may include industry and sector performance, changes in technology, operational and financing cash flow factors, and changes in the investee’s credit rating. The Company records other than temporary impairments on marketable equity securities and marketable equity method investments in gains (losses) on equity investments, net of previously recorded gains (losses). For more information on investments, see Note 3.

Leases

The Company determines, at the inception of an arrangement, whether the arrangement is or contains a lease, based on the unique facts and circumstances present. Operating lease assets represent the Company’s right to use an underlying asset for the lease term and operating lease liabilities represent its obligation to make lease payments arising from the lease. Right-of-use (“ROU”) assets and operating lease liabilities are recognized at the commencement date of the lease based upon the present value of lease payments over the lease term. When determining the lease term, the Company includes options to extend or terminate the lease when it is reasonably certain, at inception, that the Company will exercise that option. The interest rate implicit in lease contracts is typically not readily determinable; accordingly, the Company uses its incremental borrowing rate, which is the rate that would be incurred to borrow on a collateralized basis over a similar term an amount equal to the lease payments in a similar economic environment, based upon the information available at the commencement date. The lease payments used to determine the Company’s operating lease assets may include lease incentives, stated rent increases and escalation clauses linked to rates of inflation, when determinable, and are recognized in determining its ROU assets. The Company’s operating leases are reflected in the operating lease, right-of-use assets; lease liabilities, current; and lease liabilities, non-current in its consolidated balance sheets.

Lease expense for minimum lease payments is recognized on a straight-line basis over the lease term. As a result of the Company’s adoption of ASU 2016-02, it no longer recognizes deferred rent on the consolidated balance sheet. Short-term leases, defined as leases that have a lease term of 12 months or less at the commencement date, are excluded from this treatment and are recognized on a straight-line basis over the term of the lease. Variable lease payments are amounts owed by the Company to a lessor that are not fixed, such as reimbursement for common area maintenance costs for our facility lease, and are expensed when incurred.

Financing leases, formerly referred to as capitalized leases, are treated similarly to operating leases except that the asset subject to the lease is included in the appropriate fixed asset category, rather than recorded as a right-of-use asset, and depreciated over its estimated useful life, or lease term, if shorter. For more information, see Note 4.

6670

Table of Contents

Stock-Based Compensation

The Company grants restricted stock awards, and stock options to certain directors, officers, and employees. The fair value of restricted stock awards is the market price of the Company’s common stock as of the grant date, and the fair value of each stock option grant is estimated as of the grant date using the Black-Scholes option pricing model. Determining the fair value of stock option awards at the grant date requires judgment about, among other things, stock volatility, the expected life of the award, and other inputs.

Share-based compensation is recorded over the requisite service period, generally defined as the vesting period. The Company records share-based compensation for service-based restricted stock awards and stock options on a straight-line basis over the requisite service period of the entire award. The Company accounts for forfeitures as they occur. The Company issues new shares of common stock to satisfy exercises and vesting of awards granted under its stock plans. Share-based compensation expense is reflected in personnel costs in the consolidated. statements of comprehensive income.

The Company accounts for stock-based awards to employees based on the fair value of the award on the grant date. The fair value of stock options is estimated using the expected dividend yields of the Company’s stock, the expected volatility of the stock, the expected length of time the options remain outstanding, and the risk-free interest rates. Changes in one or more of these factors may significantly affect the estimated fair value of the stock options. The Company recognizes forfeitures as they occur. The fair value of awards that are likely to meet goals, if any, are recorded as an expense over the vesting period. For more information, see Note 10.

Income Taxes

The Company accounts for income taxes under the asset and liability method, whereby deferred tax asset or liability account balances are determined based on the difference between the financial statement and the tax bases of assets and liabilities using current tax laws and rates in effect for the year in which the differences are expected to affect taxable income. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in the period that includes the enactment date. A valuation allowance is established when it is more likely than not that some portion or all of the deferred tax assets will not be realized.

In December 2019, the Financial Accounting Standards Board (“FASB”) released Accounting Standards Update (“ASU”) No. 2019-12, which affects general principles within Topic 740, Income Taxes. The amendments of ASU 2019-12 are meant to simplify and reduce the cost of accounting for income taxes. The FASB has stated that the ASU is being issued as part of its Simplification Initiative, which is meant to reduce complexity in accounting standards by improving certain areas of U.S. GAAP without compromising information provided to users of financial statements. The Company adopted this guidance as of June 30, 2022 and the adoption had no impact on the Company’s consolidated financial statements.

Treasury Stock

The Company records treasury stock at the cost to acquire it and includes treasury stock as a component of stockholders’ equity. During fiscal year 2023, Astrotech repurchased from the open market $119 thousand in treasury stock now held by the Company. There were no new additional purchases in fiscal year ~~2024~~2025.

Accounting Pronouncements

In ~~June~~November ~~2016~~2023, the ~~FASB~~Financial ~~issued ASU~~Accounting ~~2016-13, Measurement~~Standards ofBoard ~~Credit~~(“FASB”) ~~Losses~~issued onAccounting ~~Financial~~Standard ~~Instruments.~~ Update (“ASU”) ~~2016~~No. 2023-~~13 requires~~07, ~~entities~~Segment toReporting ~~use~~(Topic a280): ~~forward-looking~~Improvements ~~approach~~to ~~based~~Reportable onSegment ~~current~~Disclosures, ~~expected~~which ~~credit~~requires ~~losses~~disclosure ~~(“CECL”)~~of toincremental ~~estimate~~segment ~~credit~~information ~~losses~~ on ~~certain~~an ~~types~~annual ofand ~~financial~~interim ~~instruments, including trade receivables~~basis. The ~~standard~~ASU ~~will~~is ~~become~~ effective for ~~the~~fiscal ~~Company~~years ~~for financial statements periods~~ beginning after December 15, ~~2022. The~~2023, ~~adoption~~with ofretrospective ~~this~~application ~~on July~~to 1,all ~~2023~~prior ~~did~~periods ~~not~~presented. ~~have~~We aadopted ~~material~~this ~~impact~~standard onin ~~its~~fiscal ~~financial~~year ~~statements~~2025.

~~Recently~~The ~~Issued~~adoption ~~Accounting~~of ~~Standards~~this ~~Not~~on July ~~Yet~~1, ~~Adopted~~2024 did not have a material impact on its financial statements.

In ~~July~~November 2023, the FASB issued ~~ASU No 2023-03, “Presentation~~ ofAccounting ~~Financial~~Standards ~~Statements~~Update ~~(Topic 205), Income Statement~~2023-07—Segment Reporting ~~Comprehensive Income~~ (Topic ~~220~~280),: ~~Distinguishing~~Improvements ~~Liabilities from Equity (Topic 480), Equity (Topic 505), and Compensation—Stock Compensation (Topic 718)” pursuant~~ to ~~SEC~~Reportable ~~Staff~~Segment ~~Accounting Bulletin No~~Disclosures. All ~~120,~~public ~~which~~entities ~~adds~~will ~~interpretive~~be ~~guidance~~required ~~for public companies~~ to ~~consider~~report ~~when~~segment ~~entering~~information ~~into share-based payment transactions while~~ in ~~possession~~accordance ofwith ~~material~~the ~~non-public~~new ~~information.~~guidance ~~The~~starting ~~effective~~in ~~date~~annual ofperiods ~~this update is for fiscal years~~ beginning after December 15, 2023,. ~~including~~We ~~interim~~adopted ~~periods~~this ~~within~~standard ~~those~~in fiscal ~~years~~year 2025. The Company ~~does~~implemented enhanced ~~not~~annual ~~expect~~segment ~~the~~reporting ~~adoption~~disclosures tobased ~~have a material impact~~ on ~~our~~new ~~consolidated financial statements~~requirements.

6771

Table of Contents

~~In December 2023, the FASB issued~~ ASU ~~2023~~2022-~~09,~~04 ~~“Income~~- ~~Taxes~~Supplier ~~(Topic~~Finance ~~740~~Program (SFP):. ~~Improvements~~This toASU ~~Income~~requires ~~Tax~~that ~~Disclosures”~~a ~~which~~buyer isin ~~intended~~an toSFP ~~enhance~~disclose ~~the~~qualitative ~~transparency~~ and ~~decision~~quantitative ~~usefulness~~information ofabout ~~income~~its ~~tax~~program, ~~disclosures.~~including ~~The~~the ~~guidance~~nature ~~addresses~~of ~~investor~~the ~~requests~~SFP ~~for~~and ~~enhanced~~key ~~income~~terms, ~~tax~~outstanding ~~information~~amounts ~~primarily~~as ~~through~~of ~~changes~~the toend of the ~~rate~~reporting ~~reconciliation~~period, and ~~income~~presentation ~~taxes~~in ~~paid~~its ~~information~~financial statements. ~~The~~This ~~guidance~~pronouncement ishas ~~effective~~not ~~for~~impacted ~~annual periods beginning after December 15, 2024. We are assessing~~ the ~~impact~~Company’s ofconsolidated ~~this~~financial ~~guidance on our disclosures~~statements.

In August 2020, the FASB issued ASU No. 2020-06, Debt—Debt with Conversion and Other Options (Subtopic 470-20), and Derivatives and Hedging—Contracts in an Entity’s Own Equity (Subtopic 815-40): Accounting for Convertible Instruments and Contracts in an Entity’s Own Equity. The amendments in ASU No. 2020-06 simplify the complexity associated with applying GAAP for certain financial instruments with characteristics of liabilities and equity. More specifically, the amendments focus on the guidance for convertible instruments and derivative scope exceptions for contracts in an entity’s own equity. For smaller reporting companies ASU 2020-06 is effective for fiscal years beginning after December 15, 2023, including interim periods within those fiscal years. The Company does not expect its application to have a material impact on the Company’s consolidated financial statements.

~~In November~~Recently ~~2023,~~Issued ~~the FASB issued~~ Accounting Standards ~~Update~~Not ~~2023-07—Segment~~Yet Reporting (Topic 280): Improvements to Reportable Segment Disclosures. All public entities will be required to report segment information in accordance with the new guidance starting in annual periods beginning after December 15, 2023. The Company expects to enhance annual segment reporting disclosures based on new requirements.Adopted

In December 2023, the FASB issued ASU 2023-09, “Income Taxes (Topic 740): Improvements to Income Tax Disclosures” which is intended to enhance the transparency and decision usefulness of income tax disclosures. The guidance addresses investor requests for enhanced income tax information primarily through changes to the rate reconciliation and income taxes paid information. The guidance is effective for annual periods beginning after December 15, 2024. We are assessing the impact of this guidance on our disclosures.

In November 2024, the FASB issued Accounting Standards Update 2024-03 "Income Statement - Reporting Comprehensive Income - Expense Disaggregation Disclosures (Subtopic 220-40)" which requires that at each interim and annual reporting period an entity:

1. Disclose the amounts of (a) purchases of inventory, (b) employee compensation, (c) depreciation, (d) intangible asset amortization, and (e) depreciation, depletion, and amortization included in each relevant expense caption. A relevant expense caption is an expense caption presented on the face of the income statement within continuing operations that contains any of the listed expense categories.

2. Include certain amounts that are already required to be disclosed under current generally accepted accounting principles (GAAP) in the same disclosure as the other disaggregation requirements.

3. Disclose a qualitative description of the amounts remaining in relevant expense captions that are not separately disaggregated quantitatively.

4. Disclose the total amount of selling expenses and, in annual reporting periods, an entity’s definition of selling expenses.

These amendments are effective for annual reporting periods beginning after December 15, 2026, and interim reporting periods beginning after December 15, 2027: either (1) prospectively to financial statements issued for reporting periods after the effective date of this Update or (2) retrospectively to any or all prior periods presented in the financial statements. The Company expects to enhance disclosures of expenses based on new requirements.

In November 2024, the FASB also issued Accounting Standards Update 2024-04 "Debt - Debt with Conversion and Other Options (Subtopic 470-20) “Induced Conversions of Convertible Debt Instruments” to clarify the requirements for determining whether certain settlements of convertible debt instruments should be accounted for as an induced conversion. Under the amendments, to account for a settlement of a convertible debt instrument as an induced conversion, an inducement offer is required to provide the debt holder with, at a minimum, the consideration (in form and amount) issuable under the conversion privileges provided in the terms of the instrument. An entity should assess whether this criterion is satisfied as of the date the inducement offer is accepted by the holder. If, when applying this criterion, the convertible debt instrument had been exchanged or modified (without being deemed substantially different) within the one-year period leading up to the offer acceptance date, an entity should compare the terms provided in the inducement offer with the terms that existed one year before the offer acceptance date. The amendments in this Update also clarify that the induced conversion guidance applies to a convertible debt instrument that is not currently convertible as long as it had a substantive conversion feature as of both its issuance date and the date the inducement offer is accepted. The amendments are effective for all entities for annual reporting periods beginning after December 15, 2025, and interim reporting periods within those annual reporting periods. The Company is examining the impact this pronouncement may have on the Company’s consolidated financial statements.

Other accounting pronouncements issued but not yet effective are not believed by management to be relevant or to have a material impact on the Company’s present or future consolidated financial statements.

(3) Investments

The following tables summarize gains and losses related to the Company’s investments:

June 30, 2024

June 30, 2025

Available-for-Sale

Adjusted

Unrealized

Fair

(In thousands)

Cost

Gain

Loss

Value

Mutual Funds - Corporate & Government Debt

1510,~~276~~547

—-

(~~850~~668

)

149,~~426~~879

ETFs - Corporate & Government Debt

75,~~375~~425

—-

(~~327~~196

)

75,~~048~~229

Total

2215,~~651~~972

—-

(~~1,177~~864

)

2115,~~474~~108

	June 30, 2023
	June 30, 2024
Available-for-Sale	Adjusted		Unrealized		Unrealized			Fair
(In thousands)	Cost		Gain		Loss			Value
Mutual Funds - Corporate & Government Debt	$	1915,~~990~~276	$	—-	$	(~~1,025~~850	)	$	1814,~~965~~426
ETFs - Corporate & Government Debt		7,~~376~~375		—-		(~~418~~327	)		67,~~958~~048
Time Deposits		2,006		—		(10	)		1,996
Total	$	22,651	$	-	$	(1,177	)	$	21,474
Total	$	29,372	$	—	$	(1,453	)	$	27,919

We have certain financial instruments on our consolidated balance sheets related to interest-bearing time deposits. Time deposits with maturities of less than 90 days, if any, from the purchase date are included in “Cash and Cash Equivalents.” Time deposits with maturities from 91-360 days, if any, are included in “Short-term investments.” Time deposits with maturities of more than 360 days, if any, are included in “Long-term investments.” As of June 30, ~~2024~~ 2025, and ~~June~~ 302024, ~~2023,~~ the Company had no long-term investments. For more information about the fair value of the Company’s financial instruments, see Note 76.

68 The following table presents the carrying amounts of certain financial instruments as of June 30, 2025 and 2024:

Table of Contents

	*Carrying Value*
	*Short-Term Investments*				*Long-Term Investments*
(In thousands)	*June 30, 2025*		*June 30, 2024*		*June 30, 2025*		*June 30, 2024*
Money Market Funds
Mutual Funds - Corporate & Government Debt	$	9,879	$	14,426	$	-	$	-
ETFs - Corporate & Government Debt		5,229		7,048		-		-
Total	$	15,108	$	21,474	$	-	$	-

~~The following table presents the carrying amounts of certain financial instruments as of June 30, 2024 and June 30, 2023:~~ 73

	Carrying Value
	Short-Term Investments				Long-Term Investments
(In thousands)	June 30, 2024		June 30, 2023		June 30, 2024		June 30, 2023
Money Market Funds
Mutual Funds - Corporate & Government Debt	$	14,426	$	18,965	$	—	$	—
ETFs - Corporate & Government Debt		7,048		6,958		—		—
Time deposits
Maturities from 1-90 days		—		—		—		—
Maturities from 91-360 days		—		1,996		—		—
Total	$	21,474	$	27,919	$	—	$	—

(4) Leases

On April 27, 2021, Astrotech entered into a lease for a research and development facility of approximately 5,960 square feet in Austin, Texas (the “R&D facility”) that includes a laboratory, a small production shop, and offices for staff. The lease commenced on June 1, 2021, and had a lease term of 36 months. On November 11, 2022, the Company signed a lease extension agreement for the R&D facility, extending the term of the lease through April 30, 2025. ~~The Company’s total contractual base rent obligation for the eleven-month extension is approximately $95~~ ~~thousand.~~

On November 22, 2022, Astrotech entered into a sublease agreement for an additional facility directly adjacent to the R&D facility (the “subleased facility”). The subleased facility consists of approximately 3,900 square feet and will provide the space needed as the Company launches its AgLAB products and continues its R&D efforts at ATI and BreathTech. The sublease commenced on December 1, 2022, and has a lease term of 29 months. The ~~Company’s~~R&D ~~total~~Facility ~~contractual~~and ~~base~~the ~~rent~~Subleased ~~obligation~~Facility ~~for~~are ~~the~~collectively ~~subleased~~referred ~~facility is~~to ~~approximately~~herein ~~$156~~as ~~thousand~~the “Donley Facilities. ”

Operating lease assets represent the Company’s right to use an underlying asset for the lease term and lease liabilities represent its obligation to make lease payments arising from the lease. Operating lease assets and liabilities are recognized at the commencement date based on the present value of lease payments over the lease term. As the Company’s leases do not provide an implicit rate, the Company uses its incremental borrowing rate in determining the present value of lease payments. Significant judgment is required when determining the Company’s incremental borrowing rate. Lease expense for lease payments is recognized on a straight-line basis over the lease term. The amortization expense for financed lease assets for the years ended June 30, ~~2024~~2025 and 2024 ~~2023,~~ totaled $~~124~~126 thousand and $~~101~~ 124 thousand, respectively.

On January 20, 2025, the Company entered into a lease extension to extend the terms of the leases associated with the Donley Facilities effective May 1, 2025 (“Donley Facilities Lease Extension”). We are currently continuing the lease on a month-to-month basis. The monthly rent for the Donley Facilities will be $14,186 during the initial extension period.

On January 29, 2025, we entered into a new lease agreement for a facility of approximately 17,628 square feet in Austin, Texas (the “Metric facility”) for a term of 890months, which such term commences July 1, 2025. The Metric facility is intended to support and encompass all Austin based functions. Our total contractual base rent obligation for the Metric facility is approximately $3.0 million, less a tenant allowance of $317.3 thousand.

The balance sheet presentation of the Company’s operating and finance leases is as follows:

(In thousands)	Classification on the Consolidated Balance Sheet	June 30, ~~2024~~2025		June 30, ~~2023~~2024
Assets:
Operating lease assets	Operating lease right-of-use assets, net	$	~~119~~2,225	$	~~262~~119
Financing lease assets	Property and equipment, net		~~366~~79		~~484~~366
Total lease assets		$	~~485~~2,304	$	~~746~~485
Liabilities:
Current:
Operating lease obligations	Lease liabilities, current	$	~~138~~381	$	~~148~~138
Financing lease obligations	Lease liabilities, current		8924		~~168~~89
Non-current:
Operating lease obligations	Lease liabilities, non-current		—2,225		~~130~~-
Financing lease obligations	Lease liabilities, non-current		7349		~~161~~73
Total lease liabilities		$	~~300~~2,679	$	~~607~~300

6974

Table of Contents

Future minimum lease payments as of June 30, ~~2024,~~2025 under non-cancelable leases are as follows (in thousands):

For the Year Ended June 30,	Operating Leases			Financing Leases			Total
2025	$	142		$	94		$	236
2026	$	381		$	27		$	408
2026		—			27			27
2027		396			27			423
2027		—			27			27
2028		411			25			436
2028		—			25			25
2029		426			-			426
2029		—			—			—
2030		442			-			442
Thereafter		—1,057			—-			—1,057
Total lease obligations		~~142~~3,113			~~173~~79			~~315~~3,192
Imputed interest		(4507	)		(116	)		(15513	)
Present value of net minimum lease obligations		~~138~~2,606			~~162~~73			~~300~~2,679
Lease liabilities - current		(~~138~~381	)		(8924	)		(~~227~~405	)
Lease liabilities - non-current	$	—2,225		$	7349		$	732,274

Other information as of June 30, ~~2024,~~2025 is as follows:

Weighted-average remaining lease term (years):
Operating leases	07.842
Financing leases	23.600
Weighted-average discount rate:
Operating leases	64.180	%
Financing leases	56.410	%

Cash payments for operating leases for the years ended June 30, ~~2024~~2025 and ~~2023,~~ 2024 totaled $~~166~~170 thousand and $~~130~~ 166 thousand, respectively. Cash payments for financing leases for the years ended June 30, ~~2024~~2025 and ~~2023,~~2024 totaled $~~181~~94 thousand and $~~157~~181 thousand, respectively.

(5) Property and Equipment, net

As of June 30, ~~2024~~2025 and ~~2023~~ 2024, property and equipment, net consisted of the following:

	June 30,
(In thousands)	~~2024~~2025			~~2023~~2024
Furniture, fixtures, equipment & leasehold improvements	$	3,~~613~~960		$	23,~~805~~613
Software		~~881~~323			~~217~~881
Capital improvements in progress		1327			~~649~~1
Gross property and equipment		4,~~495~~610			34,~~671~~495
Accumulated depreciation		(12,~~732~~215	)		(1,~~001~~732	)
Property and equipment, net	$	2,~~763~~395		$	2,~~670~~763

Total depreciation and amortization expense of property and equipment was $~~731~~962 thousand for the year ended June 30, ~~2024~~2025 and $~~366~~731 thousand for the year ended June 30, ~~2023~~2024. Depreciation and amortization expense includes finance ~~lease right-~~ of~~-use~~ ~~asset amortization of~~ $~~124~~ 126 thousand and $~~101~~124 thousand for the years ended June 30, ~~2024~~2025 and ~~2023~~2024, respectively.

7075

Table of Contents

(6) Fair Value Measurement

ASC Topic 820 “Fair Value Measurement” (“Topic 820”) defines fair value, establishes a market-based framework or hierarchy for measuring fair value, and expands disclosures about fair value measurements. Topic 820 is applicable whenever assets and liabilities are measured and included in the financial statements at fair value. The fair value hierarchy established in the standard prioritizes the inputs used in valuation techniques into three levels as follows:

Level 1 - Quoted prices in active markets for identical assets or liabilities.

Level 2 - Inputs other than Level 1 that are observable, either directly or indirectly, such as quoted prices for similar assets or liabilities, quoted prices in markets that are not active, or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities.

Level 3 - Unobservable inputs that are supported by little or no market activity and are significant to the fair value of the assets or liabilities.

The following tables present the carrying amounts, estimated fair values, and valuation input levels of certain financial instruments as of June 30, ~~2024~~2025, and June 30, ~~2023~~2024:

	June 30, 2024
	June 30, 2025
	Carrying		Fair Value Measured Using						Fair
(In thousands)	Amount		Level 1		Level 2		Level 3		Value
Available-for-Sale Securities
Short-Term Investments
Mutual Funds - Corporate & Government Debt	$	149,~~426~~879	$	149,~~426~~879	$	—-	$	—-	$	149,~~426~~879
ETFs - Corporate & Government Debt		75,~~048~~229		75,~~048~~229		—-		—-		75,~~048~~229
Time Deposits: 91-360 days		—		—		—				—
Total Available-for-Sale Investments	$	15,108	$	15,108	$	-	$	-	$	15,108
Total Available-for-Sale Investments	$	21,474	$	21,474	$	—	$	—	$	21,474

	June 30, 2023
	June 30, 2024
	Carrying		Fair Value Measured Using						Fair
(In thousands)	Amount		Level 1		Level 2		Level 3		Value
Available-for-Sale Securities
Short-Term Investments
Mutual Funds - Corporate & Government Debt	$	1814,~~965~~426	$	1814,~~965~~426	$	—-	$	—-	$	1814,~~965~~426
ETFs - Corporate & Government Debt		67,~~958~~048		67,~~958~~048		—-		—-		67,~~958~~048
Time Deposits		1,996		—		1,996		—		1,996
Total Available-for-Sale Investments	$	21,474	$	21,474	$	-	$	-	$	21,474
Total Available-for-Sale Investments	$	27,919	$	25,923	$	1,996	$	—	$	27,919

The value of available-for-sale investments is based on pricing from third-party pricing vendors, who may use quoted prices in active markets for identical assets (Level 1 inputs).

7176

~~Table~~(7) ofStockholders’ ~~Contents~~ Equity

(7) Related-party Debt

On September 5, 2022, the 2019 Note matured and the principal amount of $500 thousand and accrued interest of $55 thousand was paid in full and the 2019 Note was canceled. With the cancelation of the 2019 Note, the Amended Subsidiary Guarantee was terminated and the Subsidiaries' Collateral was released.

(8) Stockholders’ Equity

Common Stock

On November 22, 2022, the Company filed a third amendment (the “Amendment”) to the Company’s Certificate of Incorporation (as amended, the “Certificate of Incorporation”) with the Secretary of State of the State of Delaware to effect a 1-for-30 stock split of all of the Company’s issued and outstanding shares of Common Stock. The Amendment provided that, at the effective time of the Reverse Stock Split, every 30 shares of the Company’s issued and outstanding Common Stock were automatically combined into one validly issued, fully paid and non-assessable share of Common Stock, without effecting a change to the par value per share. The Reverse Stock Split affected all shares of the Company’s Common Stock outstanding immediately prior to the effective time of the Reverse Stock Split, as well as the number of shares of Common Stock available for issuance under the Company’s equity incentive plans. In addition, the Reverse Stock Split effected a reduction in the number of shares of Common Stock issuable upon the exercise of stock options and warrants outstanding immediately prior to the effectiveness of the Reverse Stock Split with a corresponding increase in exercise price per share. The Reverse Stock Split also triggered a proportionate adjustment to the number of shares of Common Stock issuable upon the conversion of our Series D convertible preferred stock, par value of $0.001 per share (“Series D Preferred Shares”). All historical per share data, number of shares outstanding, and other common stock equivalents for the periods presented in the accompanying consolidated financial statements and notes thereto have been adjusted retroactively, where applicable, to reflect the Reverse Stock Split.

Table of Contents

Preferred Stock

The Company has issued 280,898 shares of Series D convertible preferred stock (“Series D Preferred Shares”), all of which were issued and outstanding as of June 30, ~~2024~~2025. Series D Preferred Shares are convertible to common stock on a one-to-~~one~~thirty basis. Series D Preferred Shares are not callable by the Company. The holder of the preferred stock is entitled to receive, and we shall pay, dividends on shares equal to and in the same form as dividends actually paid on shares of common stock when, and if, such dividends are paid on shares of common stock. No other dividends are paid on the preferred shares. Preferred shares have no voting rights. Upon liquidation, dissolution, or winding-up of the Company, whether voluntary or involuntary, the preferred shares have preference over common stock. The holder of Series D Preferred Shares has the option to convert said shares to common stock at the holder’s discretion.

Share Repurchase Program

On November 9, 2022, the Company’s Board of Directors authorized a share repurchase program that allows the Company to repurchase up to $1.0 million of the Company’s common stock beginning November 17, 2022, and continuing through and including November 17, 2023. A previously disclosed, on June 16, 2023, the Company terminated the share repurchase program, effective immediately, in order to comply with Regulation M under the Exchange Act. The shares could have been repurchased from time to time in the open market or privately negotiated transactions or by other means in accordance with applicable state and federal securities laws. The timing, as well as the number and value of shares repurchased under the program, could have been determined by the Company at its discretion and will depend on a variety of factors, including management’s assessment of the intrinsic value of the Company’s common stock, the market price of the Company’s common stock, general market and economic conditions, available liquidity, compliance with the Company’s debt and other agreements, applicable legal requirements, and other considerations.

Rights Plan

On December 21, 2022, the Company’s Board of Directors adopted a limited duration stockholder rights plan (the “Rights Plan”) expiring December 20, 2023 and declared a dividend of one preferred share purchase right for each outstanding share of common stock to stockholders of record on January 5, 2023 to purchase from the Company one one-thousandth of a share of Series A Junior Participating Preferred Stock, par value $0.001 per share, of the Company for an exercise price of $58.00 once the rights become exercisable, subject to the terms of and adjustment as provided in the related rights agreement.

On December 18, 2023, the Company entered into Amendment No. 1 to Rights Agreement between the Company and Equiniti Trust Company, as Rights Agent (the "Amendment"), which extends the Final Expiration Date (as defined in the Rights Plan) to December 20, 2024, unless the Final Expiration Date is further extended by the Company or the rights subject to the Rights Plan are earlier redeemed or exchanged by the Company in accordance with the terms of the Rights Plan. All other terms and conditions of the Rights Plan remain unchanged. 77

On December 18, 2023, the Company entered into Amendment No. 1 to Rights Agreement between the Company and Equiniti Trust Company, as Rights Agent (the "Amendment"), which extended the Final Expiration Date (as defined in the Rights Plan) to December 20, 2024. On December 12, 2024, the Company entered into Amendment No. 2 to the Rights Agreement between the Company and the Rights Agent, which extends the Final Expiration Date to December 20, 2025, unless the Final Expiration Date is further extended by the Company or the rights subject to the Rights Plan are earlier redeemed or exchanged by the Company in accordance with the terms of the Rights Plan. All other terms and conditions of the Rights Plan remain unchanged. All other terms and conditions of the Rights Plan remain unchanged.

Warrants

A summary of the common stock warrant activity for the year ended June 30, ~~2024~~2025 is presented below:

	Shares			Weighted Average Exercise		Aggregate Fair Market Value at Issuance			Weighted Average Remaining Contractual Life
	(In thousands)			Price		(In thousands)			(in years)
Outstanding at June 30, 2022		80		$	72.10	$	3,747			3.60
Issued		—			—		—			—
Exercised		—			—		—			—
Canceled or expired		—			—		—			—
Outstanding at June 30, 2023		80		$	72.10	$	3,747			2.60
Issued		—-			—-		—-			—-
Exercised		—-			—-		—-			—-
Canceled or expired		—-			—-		—-			—-
Outstanding at June 30, 2024		80		$	72.10	$	3,747			1.60
Issued		-			-		-			-
Exercised		-			-		-			-
Canceled or expired		(3	)		154		(194	)		-
Outstanding at June 30, 2025		77		$	69.04	$	3,553			0.63

Table of Contents

The following represents a summary of the warrants outstanding at each of the dates identified:

					Number of Shares Underlying
					Warrants
					(In thousands)
					For the period ended June 30,
Issue Date	Classification	Exercise Price		Expiration Date	~~2024~~2025		~~2023~~2024
March 26, 2020	Equity	$	187.50	March 25, 2025		1-		1
March 30, 2020	Equity	$	140.63	March 27, 2025		2-		2
October 23, 2020	Equity	$	86.25	October 21, 2025		15		15
October 28, 2020	Equity	$	80.63	October 28, 2025		6		6
February 16, 2021	Equity	$	121.88	February 11, 2026		6		6
April 12, 2021	Equity	$	56.25	April 7, 2026		50		50
Total Outstanding						8077		80

~~(9) Business Risk and Credit Risk Concentration Involving Cash~~ 78

~~For~~(8) ~~the~~Business ~~fiscal~~Risk year ended June 30, 2024, the Company had three customers that substantially comprised all of the Company’s revenue. For the fiscal year ended June 30, 2023, the Company had four customers that substantially comprised all of the Company’s revenue. Additionally, the material amount of the company's receivables was compromised by one company for the fiscal year ended June 30, 2024, and ~~two~~Credit ~~companies~~Risk ~~for~~Concentration ~~the~~Involving ~~fiscal~~Cash ~~year ended June 30, 2023.~~

~~The~~For ~~Company~~the ~~maintains~~fiscal ~~funds~~year inended June ~~bank~~30, ~~accounts~~2025, the Company had four customers that ~~may~~ ~~exceed~~substantially comprised all of the ~~limit~~Company’s ~~insured~~revenue. byFor the ~~Federal~~fiscal ~~Deposit~~year ~~Insurance~~ended June ~~Corporation~~30, (2024 the ~~“FDIC”).~~Company ~~The~~had ~~risk~~three ofcustomers ~~loss~~that ~~attributable~~substantially tocomprised ~~these~~all ~~uninsured~~of ~~balances~~the isCompany’s ~~mitigated~~revenue. Additionally, bythe ~~depositing~~material ~~funds~~amount inof ~~what~~ the ~~Company~~company's ~~believes~~receivables towas becompromised ~~high~~by ~~credit~~two ~~quality~~companies for ~~financial~~the ~~institutions.~~fiscal ~~The~~year ~~Company~~ended June ~~has~~30, ~~not~~2025 and ~~experienced~~one ~~any~~company ~~losses~~for inthe ~~such~~fiscal ~~accounts~~year ended June 30, 2024.

The Company maintains funds in bank accounts that may exceed the limit insured by the Federal Deposit Insurance Corporation (10the “FDIC”). ~~Common~~The ~~Stock~~risk ~~Incentive~~of loss attributable to these uninsured balances is mitigated by depositing funds in what the Company believes to be high credit quality financial institutions. The Company has not experienced any losses in such accounts. The general insurance limit is $250,000 ~~Stock~~per ~~Purchase~~separately ~~Plans~~insured depositor. These balances as of June 30, ~~and~~2025 ~~Other~~are ~~Compensation~~$2.6 ~~Plans~~million across two financial institutions.

(9) Common Stock Incentive, Stock Purchase Plans, and Other Compensation Plans

Stock Option Activity Summary

The Company’s stock option activity for the years ended June 30, ~~2024~~2025 and ~~2023,~~2024 was as follows:

			Weighted
			Average
	Shares		Average
	Shares		Exercise Price
			Exercise Price
Outstanding at June 30, 2022	34,284		$	40.50
Granted	6,962			12.47
Exercised	—			—
Canceled or expired	(3,080	)		139.29
Outstanding at June 30, 2023	38,166		$	27.34
Granted	131,840			10.01
Exercised	—-			—-
Canceled or expired	(13,378	)		10.70
Outstanding at June 30, 2024	156,628		$	14.18
Granted	102,260			9.43
Exercised	-			-
Canceled or expired	(45,775	)		12.10
Outstanding at June 30, 2025	213,113		$	12.35

74 The aggregate intrinsic value of options exercisable at June 30, 2025 was $0 as the fair value of the Company’s common stock is less than the exercise prices of these options. The aggregate intrinsic value of all options outstanding at June 30, 2025 was $3 thousand.

			Options
			Outstanding						Options
			Weighted-						Exercisable
			Average		Weighted-				Weighted-
	Number		Remaining		Average		Number		Average
	Outstanding		Contractual		Exercise		Exercisable		Exercise
Range of exercise prices			Life (years)		Price				Price
$5.50 – $9.69		55,000		9.45	$	7.41		2,551	$	9.21
$10.10 – $11.27		79,770		8.24		10.12		27,720		10.14
$11.51 – $19.20		76,402		8.22		14.21		29,422		18.42
$159.00 – $175.50		1,941		1.86		170.33		1,941		170.33
$5.50 – $175.50		213,113		8.49	$	12.35		61,634	$	19.10

Table of Contents

~~The~~Compensation ~~aggregate~~costs ~~intrinsic~~recognized ~~value~~related ofto ~~options~~vested ~~exercisable~~stock atoption awards during the years ended June 30, 2025 and 2024~~, was~~ were $0622 asthousand ~~the~~and ~~fair~~$480 ~~value~~thousand, ofrespectively. ~~the~~At June ~~Company’s~~30, ~~common~~2025, ~~stock~~there iswas $858 ~~less~~thousand ~~than~~of ~~the~~total ~~exercise~~unrecognized ~~prices~~compensation ofcost ~~these~~related ~~options.~~to ~~The~~non-vested ~~aggregate~~stock ~~intrinsic~~option ~~value~~awards, ofwhich ~~all~~is ~~options~~expected ~~outstanding~~to ~~at June~~be ~~30,~~recognized ~~2024,~~over ~~was~~a $3weighted ~~thousand~~average period of 1.9 years.

			Options
			Outstanding						Options
			Weighted-						Exercisable
			Average		Weighted-				Weighted-
	Number		Remaining		Average		Number		Average
	Outstanding		Contractual		Exercise		Exercisable		Exercise
Range of exercise prices			Life (years)		Price				Price
$7.47 – $19.20		154,003		8.25	$	11.83		21,379	$	18.55
$55.50 – $84.90		418		4.37		61.52		418		61.52
$159.00 – $175.50		2,207		2.86		168.97		2,207		168.97
$7.47 – $175.50		156,628		8.17	$	14.18		24,004	$	33.13

Compensation costs recognized related to vested stock option awards during the years ended June 30, 2024 and 2023, were $480 thousand and $189 thousand, respectively. At June 30, 2024, there was $973 thousand of total unrecognized compensation cost related to non-vested stock option awards, which is expected to be recognized over a weighted average period of 1.81 years.

Restricted Stock

The Company’s restricted stock activity for the years ended June 30, ~~2024~~2025 and ~~2023~~2024, was as follows:

				Weighted
				Average
	Shares			Grant-Date
				Fair Value
Outstanding at June 30, 2022		75,873		$	39.00
Granted		2,150			11.83
Vested		(26,742	)		46.68
Canceled or expired		(610	)		60.60
Outstanding at June 30, 2023		50,671		$	33.43
Granted		20,000			10.10
Vested		(26,898	)		45.50
Canceled or expired		—-			—-
Outstanding at June 30, 2024		43,773		$	15.36
Granted		65,000			5.90
Vested		(15,163	)		14.85
Canceled or expired		(7,776	)		10.97
Outstanding at June 30, 2025		85,834		$	14.11

Compensation costs recognized related to vested restricted stock awards during the years ended June 30, ~~2024~~2025 and ~~2023,~~2024 were $~~1.0~~208 ~~million~~ thousand and $1.30 million, respectively. At June 30, ~~2024~~2025, there was $~~551~~641 thousand of unrecognized compensation cost related to restricted stock, which is expected to be recognized over a weighted average period of 2.50 4 years.

Table of Contents

Stock-based Compensation in Operating Expenses

The Company’s stock-based compensation by category for the years ended June 30, ~~2024~~2025 and ~~2023,~~2024 was as follows:

	Year Ended		Year Ended
(in thousands)	June 30, ~~2024~~2025		June 30, ~~2023~~2024
Selling, Administration and General	$	~~1,364~~665	$	1,~~457~~364
Research & Development		~~114~~165		41114
Total	$	~~1,478~~830	$	1,~~498~~478

Table of Contents

Fair Value of Stock-Based Compensation

Stock-based compensation costs are generally based on the fair value calculated from the Black-Scholes model on the date of the grant of stock options. The fair values of stock options are amortized as compensation expense on a straight-line basis over the vesting period of the grants. The Company recognizes forfeitures as they occur. The assumptions used for the years ended June 30, ~~2024~~2025 and ~~2023,~~2024 and the resulting estimates of weighted-average fair value per share of options granted or modified are summarized in the following table:

	Year Ended			Year Ended
	June 30, 2024			June 30, 2023
	June 30, 2025			June 30, 2024
Expected Dividend Yield		—-			—-
Expected Volatility		99100.8506	%		~~104~~99.6785	%
Risk-Free Interest Rates		4.3624	%		14.5936	%
Expected Option Life (in years)		3.5			3.5
Weighted-average grant-date fair value of options awarded	$	1115.6380		$	2011.2263

•

The expected dividend yield is based on the Company’s current dividend yield and the best estimate of projected dividend yield for future periods within the expected life of the option, which is currently 0%.

•

The Company estimated volatility using the historical share price performance over the expected life. Management believes the historical estimated volatility is materially indicative of expectations about future volatility.

•

The estimate of the risk-free rate is based on the U.S. Treasury yield curve in effect at the time of grant.

• For the years ended June 30, ~~2024~~2025 and ~~2023~~2024, the Company used the simplified method of calculating the expected life of the options.

(1110) Income Taxes

The Company accounts for income taxes under the asset and liability method. Deferred tax assets and liabilities are recognized for the expected tax consequences of temporary differences between the tax bases of assets and liabilities and their reported amounts. Valuation allowances are established, when necessary, to reduce deferred tax assets to amounts that are more likely than not to be realized. As of June 30, ~~2024~~2025, and ~~2023~~2024, the Company had established a full valuation allowance against all of its net deferred tax assets.

For the fiscal years ended June 30, ~~2024~~2025, and ~~2023~~2024, the Company incurred losses from operations in the amount of $1113.78 million and $911.67 million, respectively. The effective tax rate for the fiscal years ~~2024~~2025 and ~~2023~~2024 was 0.01% and 0.0001%, respectively. There is materially no current state tax expense.

FASB ASC 740, Income Taxes addresses the accounting for uncertainty in income taxes recognized in an entity’s financial statements and prescribes a recognition threshold and measurement attribute for financial statement disclosure of tax positions taken or expected to be taken on a tax return. The Company had unrecognized tax benefit of $~~604~~762 thousand as of June 30, ~~2024~~2025, all of which has been accounted for as contra deferred tax assets.

For the years ended June 30, ~~2024~~2025, and ~~2023~~2024, the Company’s effective tax rate differed from the federal statutory rate of 21%, primarily due to tax credits and the valuation allowance against its net deferred tax assets.

7681

Table of Contents

Income Tax Expense and Effective Tax Rate

The components of income tax benefit/ (expense) from operations are as follows:

	Year Ended June 30,
(In thousands)	~~2024~~2025			~~2023~~2024
Current
Federal	$	—-		$	—-
State and local		(2	)		—(2	)
Total current tax benefit/ (expense)	$	(2	)	$	—
Total current tax expense	$	(2	)	$	(2	)
Deferred
Federal		—-			—-
State and local		—-			—-
Total deferred tax benefit/ (expense)	$	—-		$	—-
Total tax benefit/ (expense)	$	(2	)	$	—
Total tax expense	$	(2	)	$	(2	)

The $2 thousand of current state tax expense in both the June 2025 and 2024 ~~year~~years ~~relates~~relate to state minimum taxes.

A reconciliation of the reported income tax benefit to the amount that would result by applying the U.S. Federal statutory rate to the loss before income taxes to the actual amount of income tax benefit recognized follows:

	Year Ended June 30,
(In thousands)	~~2024~~2025			~~2023~~2024
Expected benefit	$	2,~~449~~908		$	2,~~025~~449
State tax expense		(2	)		—(2	)
Tax credits		~~251~~347			~~200~~251
Change in valuation allowance		(23,~~465~~127	)		(12,~~838~~465	)
Stock-based compensation		(~~271~~118	)		(~~296~~271	)
Prior year true-up		43-			—43
Expiration of net operating loss carryovers		—(1	)		~~(88~~-	)
Other permanent items		(79	)		(37	)
Total income tax benefit/ (expense)	$	(2	)	$	—
Total income expense	$	(2	)	$	(2	)

7782

Table of Contents

Deferred Tax Assets and Liabilities

The Company’s deferred tax assets as of June 30, ~~2024~~2025 and ~~2023,~~2024 consist of the following:

	Year Ended June 30,
(In thousands)	~~2024~~2025			~~2023~~2024
Deferred tax assets:
Net operating loss carryforwards	$	1820,~~900~~975		$	1718,~~920~~900
Tax credit carryforwards		12,~~800~~166			1,~~530~~800
Lease liability - current and non-current		63563			~~128~~63
Unrealized loss on securities		~~247~~182			~~305~~247
IRC Section 174 R&D Expense Capitalization		2,~~107~~952			12,~~061~~107
Accrued expenses and other timing		~~310~~126			~~143~~310
Stock-based compensation		63112			~~111~~63
Property and equipment, principally due to differences in depreciation		—-			—-
Total gross deferred tax assets	$	2327,~~490~~076		$	2123,~~198~~490
Less — valuation allowance		(23,444	)		(21,064	)
Less - valuation allowance		(26,482	)		(23,444	)
Net deferred tax assets	$	46594		$	~~134~~46
Deferred tax liabilities:
Right-of-use assets	$	(25468	)	$	(5525	)
Property and equipment, principally due to differences in depreciation		(21126	)		(7921	)
Total gross deferred tax liabilities		(46594	)		(~~134~~46	)
Net deferred tax assets	$	—-		$	—-

The Company files consolidated returns for federal, California, Florida, Massachusetts, Oregon and Texas.

In assessing the need for a valuation allowance, management considers whether it is more likely than not that some portion or all of the net deferred tax assets will be utilized to offset future tax liabilities. Management considers the scheduled reversal of deferred tax liabilities, projected future taxable income, and tax planning strategies in making this assessment. As of June 30, ~~2024~~2025, the Company provided a full valuation allowance of approximately $2326.45 million against its net deferred tax assets. The valuation allowance increased by approximately $~~2.4~~3 million for the year ended June 30, ~~2024~~2025.

At June 30, ~~2024~~2025, the Company had net operating loss carryforwards of approximately $8898.20 million with approximately $37.8 million ($7.9 million, tax effected) for federal income tax purposes that are available to offset future regular taxable income set to expire between the years of 2024 and 2037. The Company also had net operating loss carryforwards with indefinite lives of approximately $5060.42 million ($1012.6 million, tax effected) for federal income tax purposes that are available to offset future regular taxable income. For net operating losses with indefinite carryforward lives, generated beginning after December 31, 2017, the Tax Cuts and Jobs Act limits the amount of net operating losses to be utilized and deducted by the taxpayer to 80% of the taxpayer’s taxable income. Utilization of some of these net operating losses is limited due to the changes in stock ownership of the Company associated with the October 2007 Exchange Offer; as such, the benefit from these losses may not be realized.

The Company has federal research and development income tax credit carryovers of $1.47 million as of June 30, ~~2024~~2025. These credits will expire between the years 2035 and ~~2044~~2045. The Company also has $2547 thousand of California research and development income tax credit carryovers as of June 30, ~~2024~~2025, which credits never expire.

At June 30, ~~2024~~2025, the Company also has accumulated state net operating loss carryforwards of approximately $7.45 million ($0.4 million, tax effected) that are available to offset future state taxable income. These net operating loss carryforwards expire between the years 2026 and 2036. These losses may also be subject to utilization limitations; as such, the benefit from these losses may not be realized.

Loss carryovers are generally subject to modification by tax authorities until three years after they have been utilized.

The Company has a temporary credit for business loss carryovers that may be utilized to offset its Texas margin tax. At June 30, ~~2024~~2025, the credit amount is $0.5 million ($0.4 million, tax effected). These credits may be used to offset $13 thousand of state tax liability each year and will expire in 2027.

7883

Table of Contents

Uncertain Tax Positions

The Company had unrecognized tax benefits of $~~604~~762 thousand as of June 30, ~~2024~~2025, all of which have been accounted for as contra deferred tax assets. A roll forward of the beginning and ending amount of unrecognized tax benefits from July 1, ~~2022~~2023 to June 30, ~~2024,~~2025 is as follows:

	Year Ended June 30,
(In thousands)	~~2024~~2025			~~2023~~2024
Fiscal year beginning balance	$	~~486~~604		$	~~400~~486
Additions for tax positions of current period		~~136~~157			86136
Additions for tax positions of prior years		—1			—-
Decreases for tax positions of prior years		~~(18~~-	)		—(18	)
Fiscal year ending balance	$	~~604~~762		$	~~486~~604

The Company recognizes interest and penalties related to income tax matters in income tax expense, as incurred. For the years ended June 30, ~~2024~~2025 and ~~2023~~2024, the Company did not recognize any interest expense for uncertain tax positions. The Company is no longer subject to U.S. federal and state income tax examination by tax authorities for years before 2020.

(1211) Net Loss per Share

Basic loss per share is computed on the basis of the weighted average number of shares of common stock outstanding during the period. Diluted net loss per share is computed on the basis of the weighted average number of shares of common stock plus the effect of potentially dilutive common shares outstanding during the period using the treasury stock method and the if-converted method. Potentially dilutive common shares include outstanding stock options and share-based awards.

The following table reconciles the numerators and denominators used in the computations of both basic and diluted net loss per share

	Year Ended June 30,
	2024			2023
	2025			2024
Numerator:
Net loss	$	(1113,~~666~~850	)	$	(911,~~642~~666	)
Denominator:
Denominator for basic and diluted net loss per share — weighted average common stock outstanding		1,~~638~~665			1,~~620~~638
Basic and diluted net loss per common share:
Net loss	$	(78.1232	)	$	(57.9512	)

All unvested restricted stock awards for the years ended June 30, ~~2024~~2025 and ~~2023,~~2024 are not included in diluted net loss per share, as the impact to net loss per share is anti-dilutive. Options to purchase ~~156~~213,~~628~~ 113 shares of common stock at exercise prices ranging from $75.4750 to $175.50 per share outstanding for the year ended June 30, ~~2024,~~2025 and options to purchase 38156,~~166~~628 shares of common stock at exercise prices ranging from $107.3847 to $175.50 per share outstanding for the year ended June 30, ~~2023,~~ 2024 were not included in diluted net loss per share, as the impact to net loss per share is anti-dilutive.

7984

Table of Contents

(1312) Employee Benefit Plans

Astrotech has a defined contribution retirement plan, which covers substantially all employees and officers. `For the years ended June 30, ~~2024~~2025 and ~~2023~~2024, the Company made matching contributions of $82 92 thousand and $59 82 thousand, respectively, to the plan. The Company has the right, but not an obligation, to make additional contributions to the plan in future years at the discretion of the Company’s Board of Directors. The Company has not made any additional contributions for the years ended June 30, ~~2024~~2025 and ~~2023~~2024.

(1413) Commitments and Contingencies

Legal Proceedings

From time to time, the Company is subject to legal and administrative proceedings, settlements, investigations, claims and actions. The Company’s assessment of the likely outcome of litigation matters is based on its judgment of a number of factors including experience with similar matters, past history, precedents, relevant financial and other evidence and facts specific to the matter. Notwithstanding the uncertainty as to the final outcome, based upon the information currently available, management does not believe any matters, individually or in aggregate, will have a material adverse effect on the Company’s financial position or results of operations.

The Company establishes reserves for the estimated losses on specific contingent liabilities, for regulatory and legal actions where the Company deems a loss to be probable and the amount of the loss can be reasonably estimated. In other instances, the Company is not able to make a reasonable estimate of liability because of the uncertainties related to the outcome or the amount or range of potential loss.

~~Employment~~(14) ~~Contracts~~Subsequent Events

~~The~~Management ~~Company~~ has ~~entered~~determined ~~into~~there anare ~~employment~~no ~~contract~~subsequent ~~with~~events ato ~~key~~report ~~executive.~~through September ~~Generally~~26, ~~certain amounts may become payable in the event the Company terminates the executive’s employment~~2025.

~~(15) Subsequent Events~~ 85

Management has determined there are no subsequent events to report through September 20, 2024.

Table of Contents

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None.

Item 9A. Controls and Procedures

Disclosure Controls and Procedures

We maintain disclosure controls and procedures that are designed to provide reasonable assurance that information required to be disclosed by us in the reports we file or submit under the Exchange Act, is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to our management, including the Chief Executive Officer and Chief Financial Officer, to allow timely decisions regarding required disclosure. In designing and evaluating our disclosure controls and procedures, management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management was required to apply its judgment in evaluating and implementing possible controls and procedures. Management, including our principal executive officer and principal financial officer, has evaluated the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act) as of the end of the period covered by this Annual Report on Form 10-K. Based on this evaluation, our principal executive officer and principal financial officer have concluded that the Company’s disclosure controls and procedures were effective as of June 30, ~~2024~~2025, at the reasonable assurance level.

Management’s Annual Report on Internal Controls over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal controls over financial reporting, as such term is defined in Exchange Act Rule 13a-15(f). Under the supervision and with the participation of our management, including our principal executive and financial officers, we conducted an evaluation of the effectiveness of our internal controls over financial reporting as of June 30, 2023, based on the frame-work in the Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (the “COSO Framework”). Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Based on our evaluation under the COSO Framework, our management concluded that our internal controls over financial reporting were effective as of June 30, ~~2024~~2025.

This annual report does not include an attestation report of our registered public accounting firm regarding internal controls over financial reporting. Management’s report was not subject to attestation by our registered accounting firm pursuant to §989G of the Dodd-Frank Wall Street Reform and Consumer Protection Act, which exempts the Company from the requirement that it include an attestation report of the Company’s registered public accounting firm regarding internal controls over our management’s assessment of internal controls over financial reporting.

Changes in Internal Controls over Financial Reporting

There have been no changes in our internal controls over financial reporting that occurred during the fiscal year ended June 30, ~~2024~~2025 that have materially affected, or are reasonably likely to materially affect, our internal controls over financial reporting.

81 86

Table of Contents

Item 9B. Other Information

Insider Trading Policy

During the quarter ended June 30, ~~2024~~2025, none of our directors or officers adopted or terminated a “Rule 10b5-1 trading arrangement” or “non-Rule 10b5-1 trading arrangement”, as each term is defined in Item 408 of Regulation S-K.

PART III

As set forth below, the information required by Part III (Items 10, 11, 12, 13, and 14) is incorporated herein by reference to the Company’s definitive proxy statement to be used in connection with its ~~2024~~2025 Annual Meeting of Stockholders and which will be filed with the SEC not later than 120 days after the end of the Company’s fiscal year ended June 30, ~~2024~~2025 (the “~~2024~~2025 Proxy Statement”), in accordance with General Instructions G(3) of Form 10-K.

Item 10. Directors, Executive Officers, and Corporate Governance

The information required by Item 10 will be contained in, and is hereby incorporated by reference to, the ~~2024~~2025 Proxy Statement.

Item 11. Executive Compensation

The information required by Item 11 will be contained in, and is hereby incorporated by reference to, the ~~2024~~2025 Proxy Statement.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The information required by Item 12 will be contained in, and is hereby incorporated by reference to, the ~~2024~~2025 Proxy Statement.

Item 13. Certain Relationships and Related Transactions and Director Independence

The information required by Item 13 will be contained in, and is hereby incorporated by reference to, the ~~2024~~2025 Proxy Statement.

Item 14. Principal Accounting Fees and Services

The information required by Item 14 will be contained in, and is hereby incorporated by reference to, the ~~2024~~2025 Proxy Statement.

82 87

Table of Contents

PART IV

Item 15. Exhibits, Financial Statement Schedules

The following documents are filed as part of the report:

(a) Financial Statements.

The following consolidated financial statements of Astrotech Corporation and its wholly-owned subsidiaries and related notes, are set forth herein as indicated below.

	Page
Report of RBSM LLP, Independent Registered Public Accounting Firm (PCAOB ID: 587)	5560
Report of Armanino LLP, Independent Registered Public Accounting Firm (PCAOB ID: 83)	554
Consolidated Balance Sheets	61
Consolidated Balance Sheets	57
Consolidated Statements of Operations and Comprehensive Loss	62
Consolidated Statements of Operations and Comprehensive Loss	58
Consolidated Statement of Changes in Stockholders’ Equity	63
Consolidated Statement of Changes in Stockholders’ Equity	59
Consolidated Statement of Cash Flows	64
Consolidated Statement of Cash Flows	60
Notes to Consolidated Financial Statements	65
Notes to Consolidated Financial Statements	61
Exhibits	88
Exhibits

Exhibit No.		Description of Exhibit
3.1		Certificate of Incorporation, as filed with the Secretary of State of the State of Delaware (incorporated by reference to Exhibit 3.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on December 28, 2017).
3.2		Certificate of Amendment to the Certificate of Incorporation of Astrotech Corporation (incorporated by reference to Exhibit 3.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on July 1, 2020).
3.3		Certificate of Amendment to the Certificate of Incorporation of Astrotech Corporation (incorporated by reference to Exhibit 3.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on October 12, 2021).
3.4		Third Certificate of Amendment to the Certificate of Incorporation of Astrotech Corporation (incorporated by reference to Exhibit 3.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on November 23, 2022).
3.5		Amended and Restated Bylaws of the Registrant (incorporated by reference to Exhibit 3.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on August 1, 2023).
3.6		Certificate of Designations of Series A Junior Participating Preferred Stock, as filed with the Secretary of State of the State of Delaware (incorporated by reference to Exhibit 3.3 of the Registrant’s Form 8-K. filed with the Securities and Exchange Commission on December 28, 2017).
3.7		Certificate of Designations of Preferences, Rights and Limitations of Series D Convertible Preferred Stock, as filed with the Delaware Secretary of State on April 17, 2019 (incorporated by reference to Exhibit 3.2 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on April 23, 2019).
4.1 *		Description of Securities.
4.2		Form of Placement Agent's Warrant, issued on March 27, 2020 (incorporated by reference to Exhibit 4.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on March 26, 2020).
4.3		Promissory Note due September 5, 2020. (incorporated by reference to Exhibit 4.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on February 18, 2020).

(b) Financial Statement Schedules.

83 No financial statement schedules are provided because the information called for is not required or is shown in the financial statements or the notes thereto.

Exhibit No.		Description of Exhibit

3.1		Certificate of Incorporation, as filed with the Secretary of State of the State of Delaware (incorporated by reference to Exhibit 3.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on December 28, 2017).

3.2		Certificate of Amendment to the Certificate of Incorporation of Astrotech Corporation (incorporated by reference to Exhibit 3.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on July 1, 2020).

3.3		Certificate of Amendment to the Certificate of Incorporation of Astrotech Corporation (incorporated by reference to Exhibit 3.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on October 12, 2021).

3.4		Third Certificate of Amendment to the Certificate of Incorporation of Astrotech Corporation (incorporated by reference to Exhibit 3.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on November 23, 2022).

3.5		Amended and Restated Bylaws of the Registrant (incorporated by reference to Exhibit 3.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on August 1, 2023).

3.6		Certificate of Designations of Series A Junior Participating Preferred Stock, as filed with the Secretary of State of the State of Delaware (incorporated by reference to Exhibit 3.3 of the Registrant’s Form 8-K. filed with the Securities and Exchange Commission on December 28, 2017).

3.7		Certificate of Designations of Preferences, Rights and Limitations of Series D Convertible Preferred Stock, as filed with the Delaware Secretary of State on April 17, 2019 (incorporated by reference to Exhibit 3.2 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on April 23, 2019).

4.1 *		Description of Securities.

Table of Contents

4.4		Form of Placement Agent's Warrant, issued on March 30, 2020 (incorporated by reference to Exhibit 4.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on March 30, 2020).
4.2		Form of Placement Agent's Warrant, issued on October 23, 2020 (incorporated by reference to Exhibit 4.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on October 23, 2020).
4.5		Omnibus Amendment to Promissory Notes, dated August 24, 2020, (incorporated by reference to Exhibit 10.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on August 26, 2020).
4.3		Form of Placement Agent's Warrant, issued on October 30, 2020 (incorporated by reference to Exhibit 4.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on October 30, 2020).
4.6		Form of Placement Agent's Warrant, issued on October 23, 2020 (incorporated by reference to Exhibit 4.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on October 23, 2020).
4.4		Form of Placement Agent's Warrant, dated February 16, 2021 (incorporated by reference to Exhibit 4.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on February 16, 2021).
4.7		Form of Placement Agent's Warrant, issued on October 30, 2020 (incorporated by reference to Exhibit 4.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on October 30, 2020).
4.5		Astrotech Corporation 2021 Omnibus Equity Incentive Plan (incorporated by reference to Appendix A to the Company’s Proxy Statement on Schedule 14A filed on April 5, 2021).
4.8		Form of Placement Agent's Warrant, dated February 16, 2021 (incorporated by reference to Exhibit 4.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on February 16, 2021).
4.6		Form of Underwriter Warrant, dated April 12, 2021 (incorporated by reference to Exhibit 4.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on April 12, 2021).
4.9		Astrotech Corporation 2021 Omnibus Equity Incentive Plan (incorporated by reference to Appendix A to the Company’s Proxy Statement on Schedule 14A filed on April 5, 2021).
4.7		Rights Agreement between the Company and American Stock Transfer & Trust Company, LLC, as Rights Agent, dated as of December 21, 2022 (incorporated by reference to Exhibit 4.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on December 21, 2022).
4.10		Form of Underwriter Warrant, dated April 12, 2021 (incorporated by reference to Exhibit 4.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on April 12, 2021).
4.8		Amendment No. 1 to Rights Agreement by and between the Company and American Stock Transfer & Trust Company, LLC, as Rights Agent, dated as of December 18, 2023 (incorporated by reference to Exhibit 4.2 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on December 18, 2023).
4.9		Amendment No. 2 to Rights Agreement dated as of December 12, 2024, to the Rights Agreement between the Company and Equiniti Trust Company, as Rights Agent, dated as of December 21, 2022. (incorporated by reference to Exhibit 4.3 of the Registrant’s Form 8-K filed on December 12, 2024.)

4.11		Omnibus Amendment to Secured Promissory Notes, dated September 3, 2021, by and between the Company and Thomas B. Pickens III (incorporated by reference to Exhibit 4.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on September 8, 2021).
4.12		Rights Agreement between the Company and American Stock Transfer & Trust Company, LLC, as Rights Agent, dated as of December 21, 2022 (incorporated by reference to Exhibit 4.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on December 21, 2022).
4.13		Amendment No. 1 to Rights Agreement by and between the Company and American Stock Transfer & Trust Company, LLC, as Rights Agent, dated as of December 18, 2023 (incorporated by reference to Exhibit 4.2 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on December 18, 2023).

10.1		Security Agreement, dated September 5, 2019, by and among the Company, certain of the Company’s subsidiaries and Thomas B. Pickens III (incorporated by reference to Exhibit 10.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on September 11, 2019).
10.2		Subsidiary Guarantee, dated September 5, 2019, made by certain of the Company’s subsidiaries in favor of Thomas B. Pickens III (incorporated by reference to Exhibit 10.2 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on September 11, 2019).
10.3		Security Agreement, dated February 13, 2020, by and among the Company, certain of the Company’s subsidiaries and Thomas B. Pickens III (incorporated by reference to Exhibit 10.1 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on February 18, 2020).
10.4		Subsidiary Guarantee, dated February 13, 2020, made by certain of the Company’s subsidiaries in favor of Thomas B. Pickens III (incorporated by reference to Exhibit 10.2 of the Registrant’s Form 8-K filed with the Securities and Exchange Commission on February 18, 2020).
10.5		Acknowledgment, Consent and Affirmation of Guarantors, dated August 24, 2020 (incorporated by reference to Exhibit 10.2 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on August 26, 2020).
10.6		Omnibus Amendment to Security Agreements, dated August 24, 2020, by and among the Company, certain of the Company’s subsidiaries and Thomas B. Pickens III (incorporated by reference to Exhibit 10.3 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on August 26, 2020).

Table of Contents

10.7 Omnibus Amendment to Subsidiary Guarantees, dated August 24, 2020, made by certain of the Company’s subsidiaries in favor of Thomas B. Pickens III (incorporated by reference to Exhibit 10.4 of Registrant's Form 8-K filed with the Securities and Exchange Commission on August 26, 2020).

10.1		Joint Development and Option Agreement, dated October 20, 2020 (incorporated by reference to Exhibit 99.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on October 20, 2020).

10.2		First Amendment to Joint Development and Option Agreement, dated April 6, 2022 (incorporated by reference to Exhibit 10.9 of the Registrant's Form 10-K filed with the Securities and Exchange Commission on September 20, 2024).

10.3		Amendment No. 2 to Joint Development and Option Agreement, dated June 21, 2022 (incorporated by reference to Exhibit 10.10 of the Registrant's Form 10-K filed with the Securities and Exchange Commission on September 20, 2024).

10.4		Amendment No. 3 to Joint Development and Option Agreement, dated December 11, 2023 (incorporated by reference to Exhibit 10.11 of the Registrant's Form 10-K filed with the Securities and Exchange Commission on September 20, 2024).

10.5		Letter of Agreement, dated March 24, 2021 (incorporated by reference to Exhibit 10.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on March 30, 2021).

10.6*		Amendment No. 1 to Letter of Agreement, dated September 22, 2021, by and between Sanmina Corporation and Astrotech Technologies, Inc.

10.7*		Amendment No. 2 to Letter of Agreement, dated December 1, 2021, by and between Sanmina Corporation and Astrotech Technologies, Inc.

10.8*		Amendment No. 3 to Letter of Agreement, dated October 12, 2022, by and between Sanmina Corporation and Astrotech Technologies, Inc.

10.9*+		Amendment No. 4 to Letter of Agreement, dated July 1, 2025 by and between Sanmina Corporation and Astrotech Technologies, Inc.

10.10		Amendment to Joint Development and Option Agreement, dated June 8, 2022 (incorporated by reference to Exhibit 99.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on June 23, 2022).

10.11 †		Employment Agreement, effective October 6, 2008 between SPACEHAB, Incorporated and Thomas B. Pickens, III (incorporated by reference to Exhibit 10.1 of the Registrant’s Current Report Form 8-K filed with the Securities and Exchange Commission on November 21, 2008).

10.12†		Form of Amended and Restated Indemnification Agreement of Astrotech Corporation (incorporated by reference to Exhibit 10.1 to the Registrant’s Report on Form 8-K file with the Securities and Exchange Commission on December 19, 2024).

10.8		Joint Development and Option Agreement, dated October 20, 2020 (incorporated by reference to Exhibit 99.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on October 20, 2020).
10.9*		First Amendment to Joint Development and Option Agreement, dated April 6, 2022, by and between The Cleveland Clinic Foundation and BreathTech Corporation..
10.10*		Amendment No. 2 to Joint Development and Option Agreement, dated June 21, 2022, by and between The Cleveland Clinic Foundation and BreathTech Corporation..
10.11*		Amendment No. 3 to Joint Development and Option Agreement, dated December 11, 2023, by and between The Cleveland Clinic Foundation and BreathTech Corporation.
10.12		Cash Reserve Agreement, dated October 19, 2020 (incorporated by reference to Exhibit 99.3 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on October 20, 2020).

10.13		Letter of Agreement, dated March 24, 2021 (incorporated by reference to Exhibit 10.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on March 30, 2021).
10.14		Investigator-Initiated Study Agreement, dated March 31, 2021 (incorporated by reference to Exhibit 99.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on April 6, 2021).

10.15*		Amendment #1 to Investigator- Initiated Study Agreement, dated March 14, 2023, by and between The Cleveland Clinic Foundation and BreathTech Corporation.
10.16		Acknowledgement, Consent and Affirmation of Guarantors, dated September 3, 2021 (incorporated by reference to Exhibit 10.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on September 8, 2021).
10.17		Omnibus Amendment to Security Agreements, dated September 3, 2021, by and among the Company, certain of the Company's subsidiaries and Thomas B. Pickens III (incorporated by reference to Exhibit 10.2 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on September 8, 2021).
10.18		Omnibus Amendment to Subsidiary Guarantees, dated September 3, 2021, made by certain of the Company's subsidiaries in favor of Thomas B. Pickens III (incorporated by reference to Exhibit 10.3 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on September 8, 2021).
10.19		Amendment to Joint Development and Option Agreement, dated June 8, 2022 (incorporated by reference to Exhibit 99.1 of the Registrant's Form 8-K filed with the Securities and Exchange Commission on June 23, 2022).
10.20 †		Employment Agreement, effective October 6, 2008 between SPACEHAB, Incorporated and Thomas B. Pickens, III (incorporated by reference to Exhibit 10.1 of the Registrant’s Current Report Form 8-K filed with the Securities and Exchange Commission on November 21, 2008).
10.21†		Form of Indemnification Agreement of Astrotech Corporation (incorporated by reference to Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q filed with the Securities and Exchange Commission on February 17, 2015).
16.1		Letter dated August 7, 2023 from Armanino LLP to the Securities and Exchange Commission (incorporated by reference to Exhibit 16.1 to the Registrant’s Form 8-K filed with the Securities and Exchange Commission on August 7, 2023).
21.1 *		Astrotech Corporation and Subsidiaries — Subsidiaries of the Registrant.
23.1 *		Consent of Armanino LLP.

Table of Contents

23.2*		Consent of RBSM LLP.
21.1 *		Astrotech Corporation and Subsidiaries — Subsidiaries of the Registrant.
23.1*		Consent of RBSM LLP.
31.1 *		Certification of Thomas B. Pickens III, the Company’s Chief Executive Officer, pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002, filed herewith.
31.2 *		Certification of ~~Jaime~~Jennifer ~~Hinojosa~~Canas, the Company’s Chief Financial Officer, pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002, filed herewith.
32.1 *		Certification of Thomas B. Pickens III, the Company’s Chief Executive Officer, pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, filed herewith.
32.2 *		Certification of ~~Jaime~~Jennifer ~~Hinojosa~~Canas, the Company’s Chief Financial Officer, pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, filed herewith.
97.1*		Astrotech Corporation Compensation Recovery Policy.
97.1		Astrotech Corporation Compensation Recovery Policy, adopted November 17, 2023 (incorporated by reference to Exhibit 97.1 of the Registrant's Form 10-K filed with the Securities and Exchange Commission on September 20, 2024).
101.INS		Inline XBRL Instance Document
101.SCH		Inline XBRL Schema Document
101.CAL		Inline XBRL Calculation Linkbase Document
101.DEF		Inline XBRL Definition Linkbase Document
101.LAB		Inline XBRL Labels Linkbase Document
101.PRE		Inline XBRL Presentation Linkbase Document
104		Cover Page Interactive Data File (embedded within the Inline XBRL and contained in Exhibit 101)
†		Management contract or compensatory plan arrangement.
*		Filed herewith.
+		Schedules and exhibits have been omitted pursuant to Item 601(a)(5) of Regulation S-K. The Company agrees to furnish to the Securities and Exchange Commission a copy of any omitted schedule or exhibit upon request.

Item 16. Form 10-K Summary

None.

86 91

Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Astrotech Corporation By: /s/ Thomas B. Pickens III Thomas B. Pickens III Chief Executive Officer, Chief Technology Officer and Chairman of the Board

	Astrotech Corporation

Date September 26, 2025	By:	/s/ Thomas B. Pickens III
		Thomas B. Pickens III
		Chief Executive Officer, Chief Technology Officer and Chairman of the Board

Date September 20, 2024

Date September 26, 2025	By:	/s/ Jennifer Canas
		Jennifer Canas
		Chief Financial Officer, Treasurer and Secretary
		(Principal Financial and Accounting Officer)

ByDate: ~~/s/~~September ~~Jaime Hinojosa Jaime Hinojosa Chief Financial Officer~~26, ~~Treasurer and Secretary (Principal Financial and Accounting Officer)~~2025

Date: September 20, 2024

Pursuant to the requirements of the Securities and Exchange Act of 1934, this report has been signed below by the following persons on behalf of this registrant in the capacities and on the dates indicated.

/s/ Thomas B. Pickens III	Chief Executive Officer, Chief Technology Officer,	September 2026, ~~2024~~2025
Thomas B. Pickens III	and Chairman of the Board
/s/ Daniel T. Russler, Jr.	Director	September 20, 2024
/s/ Jennifer Canas	Chief Financial Officer, Treasurer and Secretary	September 26, 2025
Daniel T. Russler, Jr.
Jennifer Canas	(Principal Financial and Accounting Officer)
/s/ Tom Wilkinson	Director	September 20, 2024
/s/ Charles Winn	Director	September 26, 2025
Charles Winn
/s/ Tom Wilkinson	Director	September 26, 2025
Tom Wilkinson
/s/ Jim Becker	Director	September 20, 2024
/s/ John Halinski	Director	September 26, 2025
Jim Becker
John Halinski
/s/ Bob McFarland	Director	September 2026, ~~2024~~2025
Bob McFarland
/s/ Jaime Hinojosa	Chief Financial Officer, Treasurer and Secretary	September 20, 2024
/s/ Eric Stober	Director	September 26, 2025
Jaime Hinojosa	(Principal Financial and Accounting Officer)
Eric Stober

87 92

Filing Compare · ASTROTECH Corp